BOM Returns values are not getting copied

Dear All,
Sales Order with Sales BOM, header item will be delivered and the line items are order related billing,  the requirement is returns for the same, the BOM is exploring in the return order  but  we need the same Pricing(inclu all taxes) is copied to Return Order Type. Sales order to sales orders are the copy controls (VTAA), we have tried with copying requirements, pricing type A, B, D, G, it is not updating the conditions and value of the sales order,
The returns order process is with  reference to Sales Order
Kindly guide me to resolve the issue
Regards,
Mani,

Hi Mani,
we have tried with copying requirements, pricing type A, B, D, G, it is not updating the conditions and value of the sales order,
From above statment it seems that you have different pricing procedure. If this is the case make sure that you have same conditions in pricing procedure (and hope you have not restricted price calculations based on sales document type, item category etc which will differ in both documents)
You can set the pricing type as G and modify the tax condition for proposing the pricing date to document pricing date(can try option of B or D not sure)
Please try and revert back to forum if you have any issues.
Thanks and Regards,
Atul

Similar Messages

  • Sub items are not getting copied into excise invoice

    Hi Guru's
    I am using Sales BOM in my sale order, pricing and inventory are controlled at sub-item level.
    I am creating the outbound delivery with reference to sale order and billing document (Commercial Invoice) with reference to outbound delivery.
    When I create an excise invoice in J1IIN, subitems are not getting copied from billing document, instead only main item is getting copied along with sum of all the excise duties of subitems. Ex: A is main item (Not relevant for pricing). B and C are subitems with excise duty 10 and 20 respectively. Here A is getting copied with excise duty 30 (10 +30).
    When I download the excise register, register is showing all A, B and C items with quantity but it is not showing the corresponding excise duties of subitems. We would like to avail cenvat at sub items.
    Kindly suggest me how can I copy subitems into excise invoice from billing document.
    Thanks & Regards.
    Swamy H P

    Hi Lakshmipathi,
    Thank you so much for the response.
    Yes, I am able to save the outgoing excise invoice(J1IIN) without any errors. It's working fine for normal materials(With out BOM), but for BOM materials even though main item is not relevant for pricing as pricing is controlled at sub items all the excise duties (BED, ECS and S&H cess) of sub items are getting copied to main item while creating the outgoing excise invoice.
    I mean excise invoice is showing only main item with all the sub items excise duties. same is getting posted also.
    But when I extract and download RG1 register, RG1 report is showing both main item and sub items with quantity but excise duties are not shown.
    I debugged and found that excise duties are not flowing to table J_1irg1 from J_1iexcdtl.
    Thanks & Regards,
    Swamy H P

  • While Creation Of SaleOrder Char Values are not getting saved.(V C)

    Hi SAP gurus,
    One of my client can able to create a saleorder but when we go and see in VA03 Display mode,we found Charactrestic values getting miised out.What could be the probale reasons.
    Note: I Have stimulate the required combination as per my client requirement in CU50,here i can able to indentify the Green Sign,but While Creation Of SaleOrder Char Values are not getting saved.
    Awaiting for your valuable reply.
    Cheers,
    Kumar.S

    Kumar ,
    If you assign values in classification view or configuration profile  they will become default for the product, and it willnot be changed in sales order.
    another thing if the item category is incorrect you will not get the configuration pop up at all .
    problem what i understand from your thred is at the time of sales ordeer creation there is some inconsistances in the configuration , may be some condition is not fullfilling.
    If in CU50 the result shown are error free, same configuration should owrk properly in sales configuration process, please again try to create it in sales order with same value assignment also check all the messages.
    see the result of configuration before saving the sales order , i hoep it will work for you.
    I am assuming all the things from SD are properly configured ie item catageory, varient pricing etc.
    Check and revert back.
    Regards
    Ritesh

  • Values are not getting updated in sales report

    I have configured sales information system, and i have been trying to run sales report but values are not getting updated in sales report, System will through message that no data exists.
    regards,
    thooyavan

    Hi,
    Please check with the Customer and Material Statistics group in the Customer and material master respectively.
    Further check with the LIS settings (Sales Area combination with the Update group).
    Reward points if this helps you.
    Regards,
    Harsh

  • Values are not getting updated in 'stocks App' in my i4 phone.  What is the solution?

    values are not getting updated in 'stocks App' in my i4 phone.  What is the solution?

    you have encountered activation lock.  Read iCloud: Activation Lock

  • Valid from and Valid to are not getting copied to follow up document.

    Hi Experts,
    I am creating job quote as a follow up document from master quote.All are getting copied from the master quote to job quote,but valid from and valid to dates are not getting copied from master quote,instead it is calculating the date from date profile rules.
    But I need to transport the dates from Master Quote to Job Quote.
    Please advice.
    Thanks,
    Adi.

    Hi,
    You need to implement CRM_COPY_BADY for that. Please refer to:
    Re: create a new follow up complaint to the earlier completed complaint
    Regards,
    Nicolas.

  • Weights are not getting copied from quote to order

    Hi All,
    While creating sales order items with reference to a Quote the weights are not getting copied (zero shown in weights) even though the material in  quote has weight.
    Why are the weights not getting properly from quote to order .

    hi
    goto VTAA and select the target document
    click on Magnifying glass symbol
    here check whether you have selected complete Reference or not
    But if you select this then the system copies the source document completely.
    Procedure
    If you mark the field, the system copies the source document into the target document completely. The system also copies the complete reference indicator. You cannot change the indicator in the target document.
    Regards

  • Con Gen : Token Values are not getting replaced

    Hi All,
    We are on E-Sourcing 5.0 and whenever we are trying to generate a contract from master agreement,
    the token varibles are not getting replaced.
    I looked into contract generation logs and found that the token values are null..but while creating the contract it is able to find the various tokens and token values..
    Why token values are not getting replaced even though its value exists?
    Please guide me...
    Thanks and Regards,
    Himanshu Sharma
    Edited by: HImanshu Sharma on Apr 20, 2009 8:50 AM

    Hi Kamalakar,
    Thanks for replying..
    1. Yes I am using standard tokens like <%Agreement.EffectiveDate%>,<%Agreement.VendorName%>..
    2. I have checked that tokens have values..
    3. Attributes are not hidden..
    I am able to see values on the "Confirm contract document variable data" page but when I click next, it gives error in the "processing request" page.
    By going through the contract gen web service I found that the values are not getting passed..
    Can you please tell me what could be the reason..
    Thanks and regards,
    Himanshu Sharma
    P.S. Please tell me how to upload file.

  • Incoterms are not getting copied at the item level

    HI Gurus,
    I have an sales order where If we change the Incoterms at the header level, its not getting copied at the line Items. Its giving an information mesage stating, Header Business Data does not apply to Item.
    The Incoterms are intially getting copied from Customer master, but later I am not able to change it.
    Please let me know what might be the reasons ? If possible Please let me know some User exits which needs to be checked.
    Thanks,
    Swathi

    Check in VOV8 for your sale order type the following:-
    a)  If both Check Division and Item division are ticked, then system will pop up this message due to the fact that in the said sale order, the item division differs from header division
    b)  The field "ProdAttr.messages" should be blank
    Next go to VOV7, select your item category and execute.  There ensure that the box is ticked for "Business item".  If this is unticked, then system will copy all header data to line item and you cannot change it.
    thanks
    G. Lakshmipathi

  • Manual discounts are not getting copied from Quote to Sales order

    Hello All,
    If I assign a manual discount to any item in Quotation document, this condition type with its discount amount is not getting
    copied over to Sales order document, I have selected the drop down "D Copy all conditions" in the copy control for item categories,
    and both quote & Sales order use the same pricing procedure, i am i missing something here?
    I appreciate your help
    thanks
    Chandu

    Hi Chandu,
    Please try to adopt the standard pricing type in the copy control between QT and OR which is "A - Copy Pricing components Unchanged and redetermine Scales".
    Please share the outcome.
    Regards

  • Values are not getting displayed in screen

    Hi Experts,
    I have used BAPI_CHARACT_CREATE to upload characteristics(t-code: ct04),
    All data are uploaded into the Master Table, while changing the same in t-code ct04 the Value and Description is not getting displayed in screen( in Table control).
    NOTE: If i use BAPI_CHARACT_GETDETAIL to get the details of a character i am getting all the values which i have uploaded. (But not in the t-code ct04).
    BDC and LSMW is not working for this t-code.
    Please help me out.
    Thanks and Regards,
    LOGU

    Hi,
    i think you have not released the objects to repository. test and try again..
    thanks
    karthik

  • Request For Quotation - ME41 - Item texts are not getting copied

    Hi,
    I created one RFQ (Request For Quotation) by copying from the existing one (through t-code ME41). But item texts are not copied.
    How can this issue be resolved..?
    In menu path ( Item --> Texts --> Adopt Text ), "Adopt Text" option is available. But its in disabled mode.

    just use F4 to get a valid entry, it is only grey to prevent manual typing

  • Urgent - parameter values are not getting posted

    Hi
    I have a url in the wf notification that directs the user to the oaf page, the parameters are being sent as url parameters. I have no problem in accessing in the processRequest method of first page. But When I try to read the same in processFormRequest method of trainCO, I am not getting values. Any idea why?
    I tried with pageContext.putParameter() method in processRequest even the parameter value is not avaialable in processFormRequest. How to pass the parameter value from processRequest to processFormRequest?

    If the parameters are url parameters then they will be available in the processFormRequest also. If they were added using pageContext.putParameter then it will not be available in the processFormRequest

  • Spa gpa parameter values are not getting in badi

    Dear all,
               i am filling the material value in  MIGO transaction tabstrip . and i  written the code in MB_MIGO_BADI  . i am not getting the values in migo badi i written the stmt
    GET parameter id 'MAT' FIELD V_MATNR. it is giving the sy-subrc 4 . while dubuging i check the ABAP MEMORY but it is not showing the P-ID MAT in it.
    kindly help.

    Have you checked Organization Access to ensure that no one restricted that org?
    Or shipping grants and roles?
    I think there are quite a few places that you can restrict access.

  • Values are not getting updated(urgent)

    Hi,
    Iam trying to change the net-price of outline agreement using BAPI_AGREEMENT_MAINTAIN.The code is as follows.Still the price is not getting updated.The function module which im using is the right one or i have to use another one.
    data: PO_NUMBER like BAPIMEPOHEADER-PO_NUMBER.
    data: PO_HEADER like BAPIMEPOHEADER.
    data: PO_ITEM like BAPIMEPOITEM occurs 0 with header line.
    data: PO_ITEMX like BAPIMEPOITEMX occurs 0 with header line.
    data: RETURN like BAPIRET2 occurs 0 with header line.
    *data: PO_NUMBER like BAPIMEPOHEADER-PO_NUMBER.
    data: IM_AGREEMENT_HEADER like BAPIOAHEAD occurs 0 with header line.
    data: IM_AGREEMENT_HEADER_X like BAPIOAHEAX occurs 0 with header line.
    data: IM_AGREEMENT_ITEMS like BAPIOAITEM occurs 0 with header line.
    data: IM_AGREEMENT_ITEMS_X like BAPIOAITEX occurs 0 with header line.
    data : i_ekko like ekko occurs 0 with header line.
    SELECT * FROM ekko into table i_ekko WHERE ebeln = '4600000633'.
    *endselect.
    IM_AGREEMENT_HEADER-AGMT_NO = i_ekko-ebeln.
    IM_AGREEMENT_HEADER-LANGU = i_ekko-SPRAS. "Language
    IM_AGREEMENT_HEADER-VAT_CNTRY = i_ekko-STCEG_L. "country id code
    IM_AGREEMENT_HEADER-CURRENCY = i_ekko-WAERS. "currency
    IM_AGREEMENT_HEADER-DOC_CAT = i_ekko-bstyp. "Pur doc categary
    IM_AGREEMENT_HEADER-DOC_TYPE = i_ekko-bsart. "Pur doc type
    IM_AGREEMENT_HEADER-TELEPHONE = i_ekko-TELF1.
    Append IM_AGREEMENT_HEADER.
    IM_AGREEMENT_HEADER_X-AGMT_NO = 'X'.
    Append IM_AGREEMENT_HEADER_X.
    IM_AGREEMENT_ITEMS-AGRMT_ITEM = '10001'.
    IM_AGREEMENT_ITEMS-NET_PRICE = '20'.
    Append IM_AGREEMENT_ITEMS.
    IM_AGREEMENT_ITEMS_X-AGRMT_ITEM = '10001'.
    IM_AGREEMENT_ITEMS_X-NET_PRICE = 'X'.
    append IM_AGREEMENT_ITEMS_X.
    CALL FUNCTION 'BAPI_AGREEMENT_MAINTAIN'
    EXPORTING
    IM_AGREEMENT_HEADER = IM_AGREEMENT_HEADER
    TABLES
    EXT_RETURN = RETURN
    IMT_AGREEMENT_ITEMS = IM_AGREEMENT_ITEMS
    IMT_AGREEMENT_ITEMS_X = IM_AGREEMENT_ITEMS_X.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
    wait = 'X'.
    LOOP AT RETURN.
    WRITE: RETURN-MESSAGE.
    ENDLOOP.

    Hi,
    do like this:
    CALL FUNCTION 'BAPI_AGREEMENT_MAINTAIN'
    EXPORTING
    IM_AGREEMENT_HEADER = IM_AGREEMENT_HEADER
    TABLES
    EXT_RETURN = RETURN
    IMT_AGREEMENT_ITEMS = IM_AGREEMENT_ITEMS
    IMT_AGREEMENT_ITEMS_X = IM_AGREEMENT_ITEMS_X.
    if sy-subrc = 0.
            read table RETURN
                  into lwa_RETURN
              with key type = 'E'.                                " if there is an error message
            if sy-subrc = 0.
       <b>       do error processing or whatever required.</b>
            else.
              call function 'BAPI_TRANSACTION_COMMIT'
                exporting
                  wait = 'X'.
              if sy-subrc = 0.
              endif.
    endif.
    Regards,
    Sooness

Maybe you are looking for