BOM review is possible in SAP or not

Hi pp gurus,
I have one scenario in which the client want to restict using the BOM for the next month but again want to use it in the following months. Is it possible to restict the usage.
Thanks in advance

Hi LAXMIKANTH Patnaik,
Hope you got answerer of your Que.
For given the points in issue below my name on left corner there is option is coming from there you select proper points that you fill to give for that answerer just select that radio button and update automatically points will assign
And remeber if you got full answerer then closed that issue.
Regards,
Rajesh Tayade

Similar Messages

  • Is it possible to launch SAP GUI (not webGui for windows) from UWL

    Hi Experts,
    Is it possible to launch a transaction or document in SAP GUI (not WebGUI for windows) from UWL? If yes - how do I achieve that?
    Appreciate your help.
    Giri.

    Hi,
    Yes, you can create an SAP transaction iview and open that iview. Refer  following link for task launch :
    http://help.sap.com/saphelp_nw70/helpdata/EN/59/d516690e854c7090ae15bf492a869f/frameset.htm
    regards,
    Jigar Oza

  • Net bill value - why not possible in SAP

    hai,
    I have one basic doubt. Why SAP is not showing the balance amount of the bill? ex bill value is Rs.10000.00 partpayment received Rs.5000.00  in sap for partpayment, the saparate document is creating but it is not deducting the bill amount. Why it's not showing the balance as Rs.5000.00.
    Is there any logic.
    govind.

    hai Anand,
    Like bill is Rs.10000.00 ( inv.no 100)
    Part payment 1 - Rs.5000.00 (ref inv.No 100)
    Part Payment 2 - Rs.4000.00 (ref inv.No.100)
    Part Payment 3 - Rs.1000.00 instead of that if i enter Rs.3000.00 it will also accept and in reference detail it will show the same invoice number what we have adjustedin earlier.
    while entering the part payment 3, if exceed Rs.1000.00 the system dont want to allow the entry. Is it possible.
    govind.

  • Is multiple inheritence is possible in sap?

    can any one help me?
    is multiple inheritence possible in sap ?
    and is one class can extend multiplre interfaces??

    Hi,
            Multiple inheritance as a concept is not allowed in ABAP Objects. But the effect and behaviour that you get by multiple inheritance is acheviable in ABAP objects with the help of interfaces. As follows.
    An interface can inlcude more than one interface, that is an interface can extend more than one interface. Now if you have say interface1, interface2 and interface3.
    interface4 can be declared to include all three other interfaces. And you class can include this interface4 in its interfaces tab.
    Due to this your class gets the behviour(methods) that is defined in all ther interfaces. You can assign an object of this class to a reference of any one of these four interfaces. So one object can react to method calls on four different interfaces which is what you want to achevie in multiple inheritance.
    Regards,
    Sesh

  • IFRIC 1 in IFRS ---- Is it possible in SAP to discount a liability figure

    Hi All,
    As per IFRIC 1 in IFRS: To measure decommissioning provision, the periodic unwinding of discounting shall be recognised in income statement as finance cost as it occurs.
    Is it possible in SAP to discount a liability figure and charge to interest the annual addition for unwinding of discount?

    No, sorry, I mean I copied the data vector (model.getDataVector()) to an other vector, not the model. And the problem is that the serialized data did not reflect the changes if I just change vecor values, so this is why I reinstantiated the full model. I think this is rather a java io issue, not a swing issue, it seems any object I serialize will not be refreshed if I just change some attributes in it and not the full variable. Can this be true?
    On the othe hand
    table.setAutoCreateColumnsFromModel( false );
    quite simplified my framework, which is great!
    The old framework looked like this:
    public BaseTblModel resetModel() {                    
    removeListeners(tm);
    removeListeners(tb);          
    tm = new TrackTblModel();     
    tb.setModel(tm)
    reinstallEditors(tb)
    addListeners(tm);
    addListeners(tb);     
    return tm;
    Now with table.setAutoCreateColumnsFromModel( false ); it looks like as simple as:
    public BaseTblModel resetModel() {                    
    tm = new TrackTblModel();     
    tb.setModel(tm)
    return tm;
    So it would be better If I could leave out this step as well, because I do it just because of the mentioned serialization problems.

  • Logon is not possible because you have not been assigned to a business role

    I am getting the message u201CLogon is not possible because you have not been assigned to a business role; contact your system administratoru201D when I try to access an incident ticket SMIN I created in SolMan 7.1. I have seen this exact error in lower releases and was able to resolve it by making sure the business partner had a General and an employee configured. Unfortunately on 7.1 I have both but I still canu2019t open the message I created. Same error if I test SICF service /default_host/sap/bc/bsp/sap/ crm_ui_start. I have gone through SOLMAN_SETUP IT Service Management and Generate BP Automatically but no luck so far. Any ideas? Thank you,
    David

    Hi,
    As far as I know, you need to maintain business org details (like org name, positions, business partners etc) in the ppoma_crm tcode. Then have to assign a position to your user ID. This assigns the business role as well.
    This link should be helpful:
    http://www.sapcrmsecurity.com/SAP%20CRM%20Business%20Role.html
    Regards,
    Srikishan

  • Up to what level abap devlopment is possible in SAP

    hi
    up to what level abap devlopment is possible in SAP.
    thanks.

    Laxman,
    May I know the context of your query.Why do you think beyond a particular point it will not be possible.
    K.Kiran.

  • Is conditional prompt possible with SAP BO AO Excel?

    Hi folks,
    Is conditional prompt possible i.e the "prompt" should appear only when the measure is used in the report?
    Is this kind of feature possible with SAP BO AO on HANA?
    Regards,
    Krishna Tangudu

    Could you clarify?
    Do you mean conditional formatting?
    If against HANA, I am not sure as the SAP help doesn't specifically mention it:
    http://help.sap.com/businessobject/product_guides/AMS14/en/14SP7_aaoffice_user_en.pdf
    See page 141 - Source: SAP help
    SAP HANA data sources
    With SAP HANA data sources, you can use the following Analysis functions to analyze your data:
    ● Inserting a crosstab with SAP HANA data
    You can also insert more than one data source in a workbook.
    ● Saving/Opening a workbook to/from the business intelligence platform server
    ● Undo/Redo
    ● Defining style sets for crosstabs
    ● Swapping axes
    ● Analyzing data with the design panel
    ● Filtering members
    ● Sorting data by members and by measures
    ● Inserting charts
    ● Inserting filter components
    ● Converting crosstab cells to formula
    ● Creating Presentations
    ● Pause Refresh

  • SAP OSS NOTES

    Hi experts!
          I don't understand very much how can I know if a SAP note is applicable or not for my system. I know that if I go to System -> Status -> Component Information I can see the realease and level of the support package but in the note I see an specification of the release and version of the support package... that is the part that I don't understand very much... That means if the version is higer in the note and in the system the version is minor the note is applicable? I'm correct?
    Thanks for the help!

    Hi Carlos, pls chk this.
    OSS notes describe bugs/issues/problems in SAP software, provide the technical details and correction instructions.
    Notes also sometimes cover 'features' (ie things that are not bugs) that cause ambiguous application behavior. Additionally, specific information relevant to releases, SAP strategy (eg when is support to a particular version going to end) regarding its products and so on is also provided via notes.
    You have a search portal for SAP Notes which will tell you more about it.
    You would a S-user id to logon to the OSS Notes. The S-user id is basically based on the installation number of your SAP system. You can get the user id from your BASIS. Once you get this then logon to this link:
    http://service.sap.com/notes.
    Check this:Re: oss
    Also check this document. It has the step by step procedures with screenshots to apply a Note.
    http://www.sappoint.com/basis/snote.pdf
    first you should have oss id then you can see oss note here
    https://service.sap.com/notes
    take a look thread
    oss
    oss note is a document provided by SAP that described particular issue, usually with symptom, cause(the reason), solution provided, and some other info (correction instruction and code).
    oss note has version, date issued, and categorized to application area (e.g BW, CRM, etc).
    in practice, when error occured, normally there will be error number and message, that can be used to search oss note which in return may provide possible solutioon. some problem will have short dump, and in the dump, there is suggestion to search oss note with using keywords specified(program name, module name, etc.)
    cheers,
    Hema.

  • _Patch level in SAP HANA Note and _Build No in SAP HANA

    Hello Hana Gurus!
    I need to know where can I find the patch level in the SAP HANA and SAP HANA Notes
    For example, if I want to apply a note
    http://service.sap.com/sap/support/notes/1964428
    there is specified:
    Software Component
    Support Package
    Patch Level
    SAP HANA DATABASE 1.00
    SP069
    2
    SP070
    0
    Ok. I read a lot of sources and understand the following:
    To know the HANA Studio version:
    Help->About SAP HANA Studio.
    It will be like
    Version: 1.0.27
    Build id: 201205021925 (361805)
    Here 1.0.27 means -> 1.0 version and Revision is 27 and Build No is : 361805
    Re: From Studio, how to know the  HANA DB Version
    That is, if we apply 1964428 note, the system is upgraded to SP069 and SP070. Is that correct?
    But what Patch Level means in this (and some other) note (value 2 and 0)?
    Where I can check Patch Level in the HANA?
    And, what are figures Build No indicate
    UPD:
    Here Re: Where we can check Patch leveles in HANA? referred to a certain table "M_HOST_CONFIGURATION". But in my system it does not exist. or tell me where to find it?
    Message was edited by: Tom Flanagan

    Hi Kirisetti,
    please findanswers in italics
    1)
    I understand the database version and the studio version is not the same thing. But why do they match my system (see picture)? Or still the same thing?
    By the way, to see the version of the database I used table SYS.M_DATABASE
    A revision is released with all HANA components are part of the revision release and not just HANA DB server. So it is always ideal that you have all HANA components on same version as in your case. However is is technically feasible that you are usinga older version of Studio to connect to a newer version of HANA DB server. so Help-> About Studio would give you version of the studio and "select version from SYS.M_DATABASE" gives you version of the HANA DB server.
    2)
    and for the version and patch level
    1.0.69.02 would mean HANA DB is on Revision 69 , patch 02
    1.0.70.00 would mean HANA DB is on Revision 70
    Soultion for the problem is to update your HANA DB to revision 69, patch 2 or Revision 70.
    Did I understand correctly, if the note indicated Patch Level = 0, then we simply speak about updating to Revision, implying that no Patch Level? Or how it can be understood?
    I'm assuming here you wish to know if you are downloading the right software for the update.
    if there is a patch mentioned it is available as "Mantainence Revision <rev no>.<patch no>" for download and if there is no patch level mentioned(patch level = 0) they is avaliable as "Revision <rev no.>". Also update procedure for both Revision and patch is the same.
    3)
    Did I understand correctly, the first figure in the Build number (Build id) indicates the Patch Level? How it is possible to interpret the Build number (Build id) more? These figures represent something?
    This build number is something that comes out of build repositiory. HANA version mentioned in all notes and guide refer to just the Revision number and patch level currently. You can ignore the build number

  • Apply SAP Security Notes to all components?

    Dear Forum,
    Is it possible to take advantage of exploits in installed components although theyre not in use? I mean, when patching SAP Security Notes, does it make sence to patch components which are installed but not in use?
    Rough example:
    We have a system with 10 components (according to SPAM status) only 7 of these modules are actively used. Should all 10 receive applicable SAP Security Notes, or would it be enough to patch the ones in use?
    I hope someone is able to elaborate on this
    Thanks in advance guys,
    Kind Regards,
    Soren

    HI,
    for example reading a file. Let's say there is a bug in a program which allows malicious user to read any file on the application server. Obviously, you want to patch this even that program is not used by normal users. Another example is missing authorization checks for table view. You can have assigned proper authorizations for S_TABU_DIS but if a malicious user can trick a program without authorization check to display data from any table then you have a problem.  A real example could be an issues fixed in note 1558740. Even if you don't use IS-U those FMs are still in your system.
    Don't forget that it's good to have multiple layers of protection. So you keep authorizations tight but still you patch all security issues.
    Cheers

  • In iCal and Notifications on a notebook, is it possible to expand the notes window to make it easier to read and write notes?

    In iCal and Notifications on a notebook, is it possible to expand the notes window to make it easier to read and write notes? In the past, I have used Outlook calendar and tasks and I was able to expand the windows which allowed me to put a great amount of details into either the notes section in events and tasks. It would be great to be able to do this in iCal and Notifications as well. I am using a Macbook Pro with OS X 10.8. Thank you very much for assistance with this.

    HI,
    Try Spaces for a virtual desktop.
    http://www.ehow.com/how2189851use-spaces-mac-os-x.html
    Carolyn

  • Upgrade - SAP will not restart during MAIN_NEWBAS/STARTSAP_NBAS phase

    We are upgrading from 4.7 to NW 7.0 (SP#5)
    SAP will not restart during the phase MAIN_NEWBAS/STARTSAP_NBAS
    We had to manually apply the kernel (NW 7.2 -#63 - NON UC). This looks OK when we calll DW -version. The T03 system will not start either through the upgrade tool or manually. There is no useful log in
    \usr\sap\T03\DVEBMGS15\work
    The upgrade tool reports this error.
    Checks after phase MAIN_NEWBAS/STARTSAP_NBAS were negative!
    Last error code set: RFC call to subst_get_uvers failed with key
    RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed Connect_PM GWHOST=CSIAS9, GWSERV=sapgw15, SYSNR=15 
    LOCATION CPIC (TCP/IP) on local host with Unicode
    ERROR partner 'CSIAS9:3315' not reached
    TIME Wed Aug 31 15:09:36 2011
    RELEASE 720 COMPONENT NI (network interface)
    VERSION 40 RC -10
    MODULE nixxi.cpp
    LINE 2898
    DETAIL NiPConnect: 165.156.101.209:3315
    SYSTEM CALL connect
    ERRNO 79 ERRNO TEXT Connection refused
    COUNTER 550
    Thanks
    Matt

    Thanks Rene, I have updated the ticket with the required information. In the mean time I am interested if anyone else had had a similar problem during an upgrade. We did have an initial error with the crtsidusr command ( setting CLASSICUSERCONCEPT + removing some of the SPCAUT) seemed to fix that. At this point the upgrade failed and we had to manually APYSAPKRN, the log shoewed it wanted the NON UC which was odd as we are including the UC in the upgrade.
    Thanks

  • I want to upgrade my storage plan in icloud. Before that i want to know whether synchronization of data in my PC and data in one of the applications of ipad is possible through icloud or not

    I want to upgrade my storage plan in icloud. Before that i want to know whether synchronization of data in my PC and data in one of the applications like "phone drive" of ipad is possible through icloud or not?

    The Photos app doesn't currently support subfolders, it only has the one level of folder/album. You will either need to change your folder structure on your computer to be just one level, see if there is a third-party photo app in the store that copes with subfolders, or just make do. You can try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

  • PO creation-ME21n-Why SAP does not check company code and Plant relation

    Hi All,
    Does someone know, why SAP does not check Plant and company code relation at the time of PO creation or how can we put validation between plant and company code at the time of PO creation.
    <b>Example:</b> Suppose i have a company 0001 which is assinged to Plant 0001. when i am creating a PO with another company code 0002(Entering at header level-Org, data) and using Plant 0001 at line item level. SAP does not do this validation.
    How can we put this check in place?
    Thanks in advance.
    Deepak

    Hello Deepak,
    There are three types of purchasing
    - Company code specific :You need to assign company code to Pur organization
    - Plant specific : You must assign plant to pur organization
    - Cross company purchasing: No assignment between company code and pur organization.
    In the case 3, the system will not check company code and plant relationship, but it will check plant and pur organization specific.
    The following is the copy of sap help text:
    You can assign a purchasing organization to one company code. This is company-specific purchasing.
    You can assign a purchasing organization to no company code. This purchasing organization can then procure for all plants assigned to it, irrespective of the company code to which the plant belongs.
    Since each plant must be assigned to a company code, the company code can be determined via the plant in each procurement transaction, even if the procuring purchasing organization is not assigned to a company code.
    A purchasing organization must be assigned to one or more plants. This is plant-specific purchasing.
    Now, check your company-code and purchase organization assignment.
    Hope this helps.
    Regards
    Arif Mansuri

Maybe you are looking for

  • Problem while accessing a complex data type

    hi, I am getting a problem while accessing a complex data type I have a wsdl as: <?xml version="1.0" encoding="UTF-8" ?> - <definitions name="OutlookReminderService" targetNamespace="http://ws.aftek.com/outlook-reminder" xmlns="http://schemas.xmlsoap

  • Remove Currency conversion for some accounts

    Hi, I got a requirement to remove currency conversion for few accounts only, I have separte currency cube assigned to this cube. Can you please tell me how to achieve this. Thanks, UB

  • Accordion on iphone

    Hello, I have an accordion that when seen on a PC or iPad works well. However, there is one small bug that's really annoying me. If I resize the browser from screen to tablet down to mobile, I clearly see a scroll bar, yet on the iPhone I do not. it'

  • Help with  Error 1328. Error applying patch to file C:\Config.Msi\PTA33F.tmp

    I am trying to open reader and presenter. I am not overly computer literate, but I know some basics. I am getting this error code- error 1328. Error applying patch to file C:\Config.Msi\PTA33F.tmp when I try to download Adobe Reader X. I don't know w

  • Clear idea about internal table.

    I'm new in sap. i need a clear idea about what is  table type , line type and  type groups   in internal table. and why we are using this ?  and give me an idea about work area also.. theses terms are confusing me. if possible please explain me with