Bookmark Section - Can it be controlled Conditionally?

When sectioning fields, occasionaly we have some fields that are blank.   This affects the bookmark section property and the navigation map.
For example
If we have 6 cost centres (6 field columns) and section each of them,
not all are required to have data.
We hide each section and set it to not show when empty, we also do this to the field as well.
When we look at the navigation map, we will get title headings for cost centre's that return data but the ones that don't have data show up as blank.  Futhermore when exported to PDF they show up as 'noname'.
Ie.
Cost center 1
   - Cost center 2
      - cost center 3
Cost center 1
   - Cost center 2
Cost center 1
   - Cost center 2
      - cost center 3
         - Cost center 4
Is it possible to build a function or conditionally set if the section is bookmarked?
For example, if cost center is null, do not bookmark, else bookmark?
Regards,
Nick

Thanks for the reply, unfortunately we want the bookmarking, just that when the value is blank for that particular section, it is creating a bookmark to nothing called 'No Name'
ie. the pdf shows
cost center 1
  cost center 2
    no name
      no name
        no name
          no name
cost center 1
  cost center 2
    cost center  3
     cost center  4
      no name
        no name
in all the no name sections, the section value is actually Null.   All the properties for the section and field are do not show when empty.
I was hoping that the bookmark section property would be that if value is null, do not bookmark.
Regards,
Nick

Similar Messages

  • Touch3G, ios 5.1.1, how to get rid of "reading List" in the bookmarks section and history file in reading list no longer works.

    Since downloading 5.1.1, my Touch 3G has "Reading List" in the Bookmarks section and the "history" tab no longer shows anything. 
    How do I delete "reading list" in the bookmarks section?  Very disappointed to have this pushed on me without warning. TIA....

    Please can u answer it fast

  • My bookmarks are gone and I want them back -- DO NOT TELL ME TO SEE YOUR LOST BOOKMARKS SECTION, I ALREADY HAVE AND IT IS NOT RELEVANT.

    My bookmarks are gone, yet again. This has happened before, but last time it was fine. I was able to restore them since they get saved automatically some days. This time, the "restore" option is not working. It says it can't get to the files or something. My bookmarks are VERY important to me. I would like them back. And please, PLEASE do not tell me to check the "lost bookmarks" section. I read through everything that looked applicable and none of it helped in the least. I apologize if I am being rude, but my bookmarks ARE ALL BLOODY GONE! I even looked in some MozillaZine thing for help, and it hasn't helped at all! It just tells me "this is here, which is a bunch of letters and numbers you'll never understand, and that's there, which is ANOTHER bunch of letters and numbers you'll never understand!!" NONE OF IT MAKES ANY SENSE WHATSOEVER! I want to talk to someone personally about this. An English-speaking human, preferably. God, I don't even CARE! Just help me get them back!!

    I've encountered the same problem; I (reluctantly) upgraded Firefox after years of happily using version 2, and discovered that I should have, apparently, saved my bookmarks before updating.
    There is NO "places.sqlite" file anywhere on my hard drive.
    Following the procedure at https://support.mozilla.com/en-US/kb/Lost+Bookmarks#Restoring_bookmark_backups restores the bookmarks folder saved *today*. . . after Firefox reverted to a *two year old file* and saved it over my existing one. (How do I know it's two years old? It has house search information from before my toddler's birth, that's how.)
    There is no bookmarkbackups folder.
    Searches across my hard drive for the following files turn up nothing useful:
    * bookmarks.bak
    * bookmarks.html
    * bookmarks.html.moztmp
    * bookmarks-(date).html
    * bookmarks-(date).json
    Oh, there *is* a bookmarks.html file that's larger than the 7/2 one that's been created; it is, however, from a transfer from IE bookmarks dated 2006.
    None of the rest exit. Even searching for just the extension of .json turns up nothing.
    I really, really want my bookmarks back, and I am not thrilled about this; I trusted Firefox not to screw up on an upgrade, and that's the only reason I didn't make a backup before installing. Silly me.

  • All the icons in the bookmarks section for each individual site have disapeared after upgrading to the newest firefox

    How can I restore the icons on all of my bookmarks, as now its just a long list of sites with no small icons after installing the latest firefox. The bookmark icons however Are appearing in the Browser Window bookmark section and Not appearing in the Top of the Screen bookmark section.

    Hi gandt,
    You should take a look at [https://support.mozilla.org/en-US/kb/latest-firefox-issues#os=mac&browser=fx9 this article] that discusses some of the issues with the latest build of Firefox.
    There is some information in there that should help you to resolve your issue. Luckily, it is a very easy fix.
    Hopefully this helps!

  • The "organize bookmarks" section has disappeared from my bookmarks dropdown. I want to export my list as back-up prior toan overhaul. No major changes have been done to account for it. in English

    The "organize bookmarks" section has disappeared from my bookmarks dropdown. I want to export my list as back-up prior toan overhaul. No major changes have been done to account for it. in English
    I have tried the usual suspects to no avail - the item remains stubbornly hidden

    It's called "Show All Bookmarks" now. You can also open it by pressing CTRL+SHIFT+B

  • Is there search function just limit itself to just the bookmarks section only

    Is there a search function just limit itself to just the bookmarks section only and not search through the entire document?

    Hi jchua77,
    This feature is not there in Acrobat software.
    You can fill out the wish form to request one : https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • In alv report can i use control break events? if no .whay?

    Hi all,
    in alv report can i use control break events? if no .whay?

    hi,
    you can use control break statements in ALV report.
    for example: if one PO is having more than one line item, that time you need to display PO only once.

  • Can't find FILTER CONDITION for filters or Function_Name for Functions

    In the Data Warehouse 11gr1 views all_iv_xform...
    I can't seem to find the Filter Conditions for filters and function name for functions that are called.
    I have looked at the other views in the documentation for the API's but can't seem to find this information.
    Any body have any ideas where this information is?
    thanks
    greG

    select map_component_id, position, source_parameter_name
    from ALL_IV_XFORM_MAP_PARAMETERS
    where map_component_id in (
    SELECT map_component_id
    FROM ALL_IV_XFORM_MAP_COMPONENTS
    WHERE MAP_ID IN (
    select MAP_ID
    from ALL_IV_XFORM_MAPS
    where MAP_NAME = :p_map_name
    AND OPERATOR_TYPE = 'Filter'
    Using map_component_id and position from above query you can see your filter condition defined in property_value:
    select map_component_name, property_name, property_value
    from ALL_IV_XFORM_MAP_PROPERTIES
    where map_component_id = :p_comp_id;

  • Can we use control events in smartforms

    Hi all,
    I am srinivas. can we use control events in smartforms, I mean at new, at end of ..... if these are not used can you suggest me any alternative....
    Actually my requirement is like a classical report, for which I need to display subtotal and grand totals based on two fields....
    Please help me out in this issue as it is very urgent.
    <b><REMOVED BY MODERATOR></b>
    Thanks in advance....
    Regards,
    Sri...
    Message was edited by:
            Alvaro Tejada Galindo

    Hi Nick,
            Thanks for the reply... it is really very useful for me.
    As I discussed in my earlier mail regarding the output sequence, which should be in the below format.
                                           number       quantity uom      unitprice        amount curr
    plant
           material
                   date
                                             x                 y                    z                      A           
                                             e                 f                     g                      h
                                             p                 q                     r                      s
                   subtotal date..... 1                   2                    3                       4
                   subtotal  material.5                  6                    7                       8
    As you said when I using <b>event of Begin</b> its working fine. but while using the <b>event of end</b>,  I am specifying date and then matnr (sort) its taking(nodes are created mean first matnr and then date) in the reverse order and when I am taking matnr and date it is placing the events(nodes) in the right order but the order date is not triggering.
    can please tell me how to proceed here..
    waiting for your reply..
    Regards,
    Srinivas

  • Can we use If condition in so10?

    Hi Experts,
    I want to have different text descriptions for different release code in PR workflow
    can I dynamically change the task description keepin the task as same .
    can we put if condition in task description ?
    Thanks & Regards
    Dharmesh Sharma

    Use this syntax in Task Description it will work. If you are using Include Text and maintaining the condition in include text bring that text to Task Description.
    Syntax:
    /: IF &BUS2015.RelCode; = 'HD'
    Head of Department
    /: ENDIF
    /: IF &BUS2015.RelCode; = 'DR'
    Director
    /: ENDIF
    Regards,
    Ramu N.

  • My bookmark icons can be fully seen in bookmark toolbar. But on the address bar and on tab most of the icons are blank and when I open most of the websites, their icons are also blank, too. I've already reinstall the firefox 3.6.3 but it is the same. Plea

    My bookmark icons can be fully seen in bookmark toolbar. But on the address bar and on tab most of the icons are blank and when I open most of the websites, their icons are also blank, too. I've already reinstall the firefox 3.6.3 but it is the same. Please help me. Some of the websites show thier icon normally.
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3

    Yes, it doesn't work. I ran in safe mode. nothing changed. I uninstalled Mozilla firefox with only standard removal, no change. I finally uninstalled Mozilla with complete removal and reinstalled it, then it return to normal. Why does this happen? Thanks for your reply.

  • Can some body give me an advice, my cursor can not be controlled after I shut it down, and open again. But this problem goes away after I closed and opened the lid

    Can some body give me an advice, my cursor can not be controlled (using pad) after I shut it down, and open again. But this problem goes away after I close and open the lid.

    Boot from your OS installer disk and run Repair Disk from Disk Utility.

  • How can I pass multiple condition in where clause with the join table?

    Hi:
    I need to collect several inputs at run time, and query the record according to the input.
    How can I pass multiple conditions in where clause with the join table?
    Thanks in advance for any help.
    Regards,
    TD

    If you are using SQL-Plus or Reports you can use lexical parameters like:
    SELECT * FROM emp &condition;
    When you run the query it will ask for value of condition and you can enter what every you want. Here is a really fun query:
    SELECT &columns FROM &tables &condition;
    But if you are using Forms. Then you have to change the condition by SET_BLOCK_PROPERTY.
    Best of luck!

  • HT5622 Have Family Mobile with 2 phones and only one Apple ID can all be controlled by the main phone?

    Have Family Mobile with 2 phones and only one Apple ID can all be controlled by the main phone?

    angiefromaustin wrote:
    Yes I know the password for Apple ID.
    Then there should be no issue for you.
    angiefromaustin wrote:
    I do not know the password to get onto the 3G phone to make changes or update apps etc.
    Then there is more than one Apple ID involved.... Or a Restrictions Passcode has been set.
    angiefromaustin wrote:
    2 phones and only one Apple ID
    Then what do you mean by this ?

  • How can I select the condition one by one

    I attaching a VI in which I have two condition less than or equal and greater than or equal. With respect to the input value 0f 125 the condition should be greater than or equal and if it is 175 then it should be less than or equal. So how can I exchange the conditions. Please reply
    Attachments:
    24.1.14 data acquisition reverse corrected-1.vi ‏116 KB

    Hi perumpadapu,
    Can you show me in your code where is this "175" and "125" is coming from? Where do you want to implement your flip logic?
    " I need to relpace the greater than equal to to lesser than equal sign as the 175 becomes 125.So there should be a flip in conditions to be considered. "
    If you want to do some sort of flip conditions based on the integer value received, you can use case structure as below:
    Unless you are very certain that you will not receive any values other than 175 and 125, you can use Select. 
    "Becaus if i use case structure as you said, for the true as well as false case I have to include all these commands to execute in each case. I can't wire the both cases to the same case structure after that."
    Can you provide a screenshot to this issue?
    It would be great if you can explain what you want to do and what your code does.
    Warmest regards,
    Lennard.C
    Learning new things everyday...

Maybe you are looking for