Bookmark with Variable screen and UserExit

Hi
We're using the bookmarks in portal of N2004s.
If someone starts a bookmark it's possible to bring the user first to the variable screen. But I recognized that the userexit is not activated for some variables after changing them.
concret:
I called a report with time-selection week = 10.2007 - the report has keyfigures which are restricted by a userexit variable which is previous year (calculated by time selection - 1year) - so the report shows me the keyfigures with previous year 10.2006 and 10.2007 - I save this as a bookmark.
calling the bookmark with this link: &bookmark=46LQ49TMUQ8BRH3O91VEH0XMK&variable_screen=X
the bookmark shows me first the variable screen. The user can change then the time-selection. But when i change now the time-selection in the variable screen from 10.2007 to 20.2007 I get in the report stll 10.2006 and 20.2007.
So it seems to me the bookmark doesn't run through the user exit to fill the variable "previous year".
How can this be activated?
Thank you for your reply.
Roger

Hi
I debugged now the user exit and it seems as following:
- calling a bookmark with selection_screen=x but without the parameter clear_variables=x does run through the user exits step 1 to 3 before showing the variable screen. After changing a variable the user exit is only enabled for step 3 and not anymore for step 2 - that's why the previous year is not updated.
- calling the bookmark with selection_screen=x and clear_variables=x runs user exit with step 1 before selection screen and then after entering variables step 2 and 3 - and the previous year is filled correctly. But this is not useable, because the user want's to have selection variables prefilled.
Has someone an idea how to bring the bookmark without clear_variables=x to the point to run the step 2 in user exit after changing variables in selection screen?
Thx
Roger

Similar Messages

Problem with Variable screen in WAD

Hi ,
I have a problem with variable screen in WAD , in the varable seen it is displaying only Key , it is not giving any description , but in BEX is is displaying both Key and Description , can any only have an idea why is this happening . this is occuring only for one variable , rest are working fine .
Thanks,
Abraham

Hi Abraham,
thsi could be a problem from the specisic setting of the infocube. Please check the BEx Settings from the infocube. You can find them by the following steps:
- search for the infocube
- doubleclick on the infocube
- choose an specific infoobjekt
- right mousebutton and click "specific dataprovider settings"
- check if the right entries are set
Hope this will help.
André

When I open my MacBook Air the keyboard comes up along with the screen and does not stay still?!

When I open my MacBook Air the keyboard comes up along with the screen and does not stay still. So I need to hold down the keyboard while i open it. Other than that it works fine despite the fact that the fan noise some times is loud and sometimes it's getting warm at the base. I wonder if this can be fixed if i go to one of the apple branches.

Yes. Take the computer to the Apple store to have it fixed.
Best

I have recently installed Mavericks and since then I have been unable to shut down or log out of my mac. I work with two screens and now I seem to have programmes at the top of both screens which I didn't before. any advice?

I have recently installed Mavericks on my desk top and since then I have been unable to switch off my computer without crashing it. I work with two screen and now I seem to have the menu bar on the second screen as well which I did not have before. Can you please help me?

Dr Bettina, I had similar problems with Mavericks. I installed it on a Mini and a 13" MacBook Pro. I can't speak to your disdplay issues, but I can confirm the inability to logout, shut down, or restarft without a forced, power button shut down. I can also report frequent System Prefs freezes and finder issues, like folder contents taking half a minuite or more to render, or not appearing at all. And while a few Adobe CC apps actually ran faster, InDesign ran like molasses uphill in Decemner.
I tried uninstalling or disabling numerous 3rd party apps and pref panes. I unplugged everything but the keyboard, ran DiskWarrier, repaired permissions, did fsck -f, trashed various preference files, reinstalled the OS... You name it, and I tried it — short of a potion using eye of newt.
After two days of totally hosed productivity, I restored OS 10.8.5 on the Mini so I could actually get some work done. However, I've decided to leave Mavericks on the MBP as a sort of crash dummy, and will install and thoroughly test all updates until stability has been achieved. Then — and only then — will I upgrade the Mini to Mavericks, even if it means waiting 'til a .2 or even .3 update.
Good luck to you...

Is there any way to increase the font size in the Creative Cloud. Using a Lenovo Yoga 2 with 14" screen and care barely see the menus

Is there any way to increase the font size in the Creative Cloud. Using a Lenovo Yoga 2 with 14" screen and care barely see the menus.

In short, no. There is no fix yet. They only barely acknowledge there is a problem. The "fix" is to enable 200% UI scaling which makes everything comically huge and unusable. This is pretty much of a joke. A really, really EXPENSIVE joke.

Can bookmarks be protable for multiple computers? Is it an option to log on and use my bookmarks with multiple computers and locations? Thanks

Can bookmarks be protable for multiple computers? Is it an option to log on and use my bookmarks with multiple computers and locations? Thanks

Profile is a folder which store all your personal data in a safe place
* https://support.mozilla.com/en-US/kb/Profiles
You can use this button to go to the current Firefox profile folder:
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
here explain how to backup profile
* https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
Here explain how to restore it
*https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile

For some reason, even though I have advanced features checked, the menu with green screen and all those isn't popping up when I drag the video on top of another one.

For some reason, even though I have advanced features checked, the menu with green screen and all those isn't popping up when I drag the video on top of another one. Help?

Hi
I would trash - iMovie pref file - and re-try - sounds like this got faulty.
• Delete iMovie pref. file. iMovie pref. file resides.
Mac Hard Disk (start-up HD) / Users / "Your account" / Library / Preferences
and is named. (one or more of these)
com.apple.iMovie.plist
com.apple.iMovie3.plist
com.apple.iMovie7.plist
com.apple.iMovie8.plist
com.apple.iMovie9.plist
com.apple.iMovieApp.plist
and find
com.apple.iApps.plist
While iMovie is NOT RUNNING - move this/these file/s out on to desk-top.
Now restart iMovie.
If You run Mac OS X.7 or more - then the Library in the User-account folder is invisibly and need to be set to be viewable. IT IS NOT in the Library on Root level (when opening MacintoshHD - first window = root level)
( It can be done like this: Open Terminal, then enter:
chflags nohidden ~/Library (exactly like this - space included)
Press return, then restart, and it will always be visible until the next major update, when you do the same thing again. )
Yours Bengt W

Hi guys, problem with grey screen and flashing question mark. on top of it while in utility, i'm unable to verify, verify disc permission or repair disc0 which is obviously my main hd. any ideas where to go from here? tried to reistall osx but no luck.

hi guys, problem with grey screen and flashing question mark. should be straight forward affair but on top of it while in disc utility, i'm unable to verify, verify disc permission, repair or even erase disc0 which is obviously my main hd. any ideas where to go from here? tried to reinstall osx but no luck, stucked when asked to chose location to install osx. would really apreciate any kind of help with this cause i'm quite new mac user. ty

If you don't have a backup, read this:
https://discussions.apple.com/docs/DOC-1689

I hav a ipod touch 4th gen with cracked screen and i finally got it to turn on itunes and the ipod was making charging noises but the screen was just white i tryed updating it to ios 5.1.1 bit did nothink so i was

i bought a ipod touch 4th generation with cracked screen and i finally got it to turn on itunes and the ipod was making charging noises but the screen was just white i tryed updating it to ios 5.1.1 bit did nothink so i was wondering how to fix this white screen i tryed a hard reboot ( whitch i heard might work ) but did nothink if there is no sulution to fixing this is it worth buying a new screen ? thaanks

Try here:
iOS: Not responding or does not turn on
If yu can't turn it off, then let the battery fully drain. After charging for at least an hour try again.
If still not successful that indicates a hardware problem and service is required.

Completely operational iPhone went into Apple store to repair shattered screen. IPhone came out with shattered screen and completely inoperable. What happened?

Completely operational iPhone went into Apple store to repair shattered screen. IPhone came out with shattered screen and completely inoperable. What happened or happens in the back room?

Thanks. That kind of confirms. I was able to get the phone home and restore it. The Genius was unable to restore. Maybe there is a connector problem? Now there is a working phone again, still with a shattered screen. Any suggestions for what's next?

Bios update failore with black screen and 3 time flashing, my product name is (Pavilion g6-2162se) .

Hi
I have Hp Laptop, my product name is (Pavilion g6-2162se), I downloaded The drivers from the page, when I installed all drivers, the bios updatede to, but its failore, and now my computer not working means with black screen and 3 time flashing .
please help

Hi,
Check if this helps:
Restoring the BIOS
If it is blinking 3 times it usually indicates memory issue..So you can try reseating the memory modules or try one memory at a time in each slot..
Refer the links below:
HP Notebook PCs - Troubleshooting LED Blink Codes or Beep Codes During Startup or Boot
Removing and Replacing a Memory Module for HP Pavilion g6-2000, g6-2100, g6-2200 and g6-2300 Noteboo...
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Toshiba sattelite pro ( SPM30 ) problem with black screen and white cursor

I have a toshiba SPM30 from a friend and I couldn't succed to resolve the problem with black screen and white cursor.I can enter in bios using F2 and I can use F12 but is not booting, I have some CD and DVD with Win Xp but it seeams that is not booting.I've traied to change the order in boot order: first CD/DVD and after HDD but still is not working...I saw that a HDD I can see details about it but at CD/DVD I can't see...I think that the CD/DVD is not working( but I can see the light and hear the sounds when I put a bootable CD or DVD)...Please, if someoane can help me......( byt the way I've traied to remove the bios battery and still is not working...)

Try f8 and try the repair your computer options
This explains advanced start up options:
http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-...
This explains start up repair:
http://windows.microsoft.com/en-us/windows/startup-repair-faq#1TC=windows-7
A system disc can be used for these repair options also, in your case if the DVD drive is not working you can use an external dvd drive if you have one.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

HT201263 APP store indicates 1 update. Press "store", "loading" briefly on screen then white screen with updates bar on top. Press updates button in lower right; nothing happens frozen with white screen and still indication 1 update. Other store featur

APP store indicates 1 update. Press "store", "loading" briefly on screen then white screen with updates bar on top. Press updates button in lower right; nothing happens frozen with white screen and still indication 1 update. Other store features and ipod work ok

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iTunes and App Stores and sign ut and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Also see:
https://discussions.apple.com/thread/4751197?tstart=0

My phone is frozen with black screen and apple logo on it

My phone is frozen with black screen and apple logo on it.s Not connecting to itunes

Basics from the user guide are restart, reset, restore from backup, restore as new. Have these ALL been tried?

Bookmark shows Variable Screen when Query use a Prequery

Hi Guys,
i have a Problem. I have a Query which use a Prequery. i can execute the Query on Web and save this by Bookmark. If i open the Bookmark the Variablescreen was displayed. Usually when i open a query without prequery and save the bookmark the query result was displayed.
Has anyone an Idea or solution for this problem?
Thx.

Hi Steffi,
Did you resolve the problem with the bookmark and the variable screen? I saw the same problem on a 3.5 system but cannot reproduce the problem on a 7.0 system. On which system did you see the problem? Did you solve it and how?
Regards
Sebastian

Bookmark with Variable screen and UserExit

Similar Messages

Maybe you are looking for