Bookmarks window & Error Console both crash in 4 seconds.

This happens every time on Ctrl-SHIFT-b&j
My brief sight of the Error Console each time suggests numerous errors but I have no time to read them properly.
My gut instinct tells me it might be connected to the .NET Framework 1.0 incompatibility.
Have installed .NET 4: no effect.
This did not happen with F.3x
XP SP3 - P4 2.8Prescott - 1GB RAM

ohhhhhhhh yeaah |-.-|
yet another kernel panic
Kinit: Mounted root (ext4 filesystem) read only
Finit-ARC - beta 0.2
finit-arc[1] general protection ip:7fd5a36c0706 sp: 7fffabbb67e8 error:0 in libc-2.9.50[7fd5a3646000+14a000]
kernel panic - not syncing: Attempted to kill init!
I install via yaourt finit-arc, after modified my /boot/grub/menu.lst adding the second entry like this:
# (0) Arch Linux
title Arch Linux
root (hd0,6)
kernel /vmlinuz26 root=/dev/disk/by-uuid/a20131af-7d82-4b29-b0b8-6d23022659c6 ro vga=795
initrd /kernel26.img
# (1) Arch Linux without UUID
title Arch Linux with FINIT-ARC
root (hd0,6)
kernel /vmlinuz26 root=/dev/sda9 ro init=/sbin/finit-arc vga=795
initrd /kernel26.img
Entry 0 for my normal boot, and entry 1 for finit-arc.
Next delete all UUID from menu.lst and fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/sda9 / ext4 defaults 0 1
/dev/sda10 /home ext4 defaults 0 1
/dev/sda7 /boot ext2 defaults 0 1
/dev/sda8 swap swap defaults 0 0
/dev/sda6 /mnt/data ext4 defaults 0 2
# USB en virtualbox
none /proc/bus/usb usbfs auto,busgid=108,busmode=0775,devgid=108,devmode=0664 0 0
and editing /etc/finittab to start kdm:
#Command that you want execute after boot
#uncomment it for X login
#you must set YOURUSERNAME
#level:/bin/su YOURUSERNAME -l -c "/bin/bash --login -c xinit >/dev/null 2>&1"
#level:/usr/sbin/gdm --nodaemon
#level:/usr/bin/xdm -nodaemon
level:/usr/bin/kdm -nodaemon
#level:/usr/bin/slim
After all, reboot my system with the entry 0 from grub and after reboot with entry 1...
Sorry to repeat, but excuse my poor English
Last edited by takedown (2009-05-06 19:04:15)

Similar Messages

My Operationsmanager 2007 R2 console keeps crashing and i get the below error.

My Operationsmanager 2007 R2 console keeps crashing and i get the below error.
Can any one please help.
Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: microsoft.mom.ui.console.exe
Problem Signature 02: 6.0.4900.0
Problem Signature 03: 4a04f2c6
Problem Signature 04: mscorlib
Problem Signature 05: 2.0.0.0
Problem Signature 06: 5174de33
Problem Signature 07: 20cd
Problem Signature 08: 143
Problem Signature 09: N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
OS Version: 6.1.7601.2.1.0.274.10
Locale ID: 1033
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Gautam.75801

Most of the time, Reinstalling the SCOM console fix the issue.
Or maybe this one can help you:
SCOM 2012 Console Error Microsoft.EnterpriseManagement.Monitoring.Console.exe
http://blog.scomfaq.ch/2012/12/13/scom-2012-console-error-microsoft-enterprisemanagement-monitoring-console-exe/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Firefox crashes system and reboots when opening a bookmark. Error message flashes too rapidly to read.

Running W2k Pro SP4, FF 12.0.
When trying to open a particular bookmarked web site, the system crashes. Same thing if try to open same web site. First a blue screen displays an error message for about one second which is too rapid to read, then system shuts down and reboots in normal mode.
This started on 10/10/2013. Previously had no problem with the bookmark or site.
Checked for a Crash Report in Troubleshooting Information Section but none appear.
Is there another file that has this information?
Is there a way to pause the screen display to be able to read the message? Clicking "P" button for pause has no effect.
Have no problem with IE6.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Get these two error messages when I run the iTunes exe file: Error 2 and Error 2 (Windows error 2). Both say Apple Application Support is required. Uninstalled and tried to install again several times. Using Windows 7 64 bit on laptop.

Trying to install iTunes on my Dell laptop with Windows 7 - 64 bit. Get these two error messages when I run the iTunes exe file: Error 2 and Error 2 (Windows error 2). Both say Apple Application Support was not found. Can anyone tell me why this is happening?

See Troubleshooting issues with iTunes for Windows updates.
tt2

Error console eating bottom half of my browser window & can't turn it off :(

I can't see—this error started with firefox for mac v33 but I could drag the error console down to the size of a small status bar at the bottom of the browser window—now when I drag it down, it drags the rest of the window with it so all I can see is a narrow landscape of whatever page I'm browsing at the bottome of the window, & the top of the browser is all white upto the toolbars :S —what's going on? I didn't change any settings over the last several updates, but maybe it's an old setting that didn't jibe with new code?

Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''

I am unable to open another Firefox4 window when I have the Error Console open and I can't open the Error Console when I have two Firefox4 windows open. Is anyone else having this problem?

I am trying to debug the jQuery to a micro site I've created and I am unable to open the Error Console when I have two Firefox windows open and I am unable to open a second Firefox window when I have the Error Console open.
I am using Mac OS X 10.6.7 and I am using Firefox 4.0.1

I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
Have you tried a bluetooth headset yet?

Why does new PSE 8 and 9 both crash on my new Toshiba laptop with Windows 7?

I bought new PSE Elements 8 and 9 and both crashed immediately on my new Toshiba Satellite P 755 laptop with Windows 7 64 bit OS. I tried going into Properties of PSE 9 and going to Compatability and putting in Windows 7 but it didn't do any good. Please help!

Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 10\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works.
For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743

Error Console pop-up when new window loads

Every window that loads (new window, private window, pop-up, etc) causes an Error Console to load.
Is there some plugin I can tweak or disable, or a browser configuration I can remove or change so this Error Console does not present?
thanks.

You can check the settings in the Web Developer extension.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I can't install itunes; the update crashed error 7 Windows error 126

I can't install itunes; the update crashed error 7 Windows error 126
PC with Windows 7
I have been using itunes for many years

I have the same problem as yours too. It always says ''The older version of Apple Software Update cannot be removed. Contact your technical support group''.

My itunes won't reinstall due to error 7 and windows error 127, i have tried ways of re installing it and everything crashes! help!

I went on my itunes about a week ago and it sid it recognised my ipod but couldn't detect it in itunes (or something like that), so following the instructions given i uninstalled itunes. then when i went to re install it, an error code came up saying error 7 (windows error 127). so following steps of previous discussions i tried to delete the whole itunes programme and apple application support. although this then failed and wouldn't let me delete it. now when i click on itunes it comes up with error 2 (windows error 2) please help!!

Guess you have to do Uninstall and Re-install of iTunes from scratch.
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Acrobat Reader X / 10 - javascript console problem / crash

Hi,
I develop adobe interactive forms and need javascript console badly!
My system:
Windows XP Prof.
Acrobat Reader 10 (free)
Internet Explorer 8
Adobe Livecycle Designer ES 9 (latest version)
The javascript console works just fine if I start an adobe form "native" = with Acrobat Reader X directly.
But if I use Adobe Livecycle Designer (latest version) [the issue also described here], the console just crashes / disappears right after it started.
The same happens if I open the pdf-file (adobe interactive form) with Internet Explorer.
E.G:
- When using Acrobat Reader "native":
console will open up on javascript syntax errors or by klicking a button ( javascript = console.show(); )
- When using Internet Explorer or Adobe Livecycle Designer:
the same pdf file cannot view the javascript console. it just "disappears immideatly" / crashes
There is any technical support for Acrobat Reader expect this forum - so I was told when I called adobe hotline.
I hope anyone could actually help me here.

Hi,
Don't open the console just the reader application. and then open the console from your script as you do.
I have noticed in the past that sometimes the console appears for a very short period of time and then vanishes and this appears to be caused by the console window being associated with the open Adobe Reader application ( when it has no documents open) rather than the open PDF file in the preview or browser.
Just a thought
Malcolm

RMI call resets Windows error code?

I'm attempting to retrieve a Windows error code from a remote system, using a simple call to the Windows API function getLastError() which is wrapped inside a JNI function on the remote system. getLastError() returns the last error code set for a particular process/thread.
The problem is, it appears that simply making the remote function call clears the error value before it can be returned. I can confirm that the error value was set on the remote system by printing the Process/Thread ID and getLastError() value to a console window on the remote system when one of my remote methods is called with out-of-range data. If I attempt to retrieve the error code, the Process/Thread ID match but the error code is always 0. No other methods were called on the remote system in between the initial error-generating method and the method which returns the error code.
Note that using the same JNI function calls without RMI works fine - I can generate error codes and retrieve them just fine.
Any ideas? Thanks in advance!

You're assuming that no other system calls are
executed between the one that caused the error you are
interested in and your GetLastError(). RMI executes
system calls on its own behalf, both to return the
value from the previous computation that caused the
error and to dispatch the new call into the method
that does GetLastError(). This approach is never going
to work. Why can't you call GetLAstError() straight
after the error happens, in the same remote method?This is what I suspected is happening, and if true, then I will simply have to rewrite my RMI method calls. Currently, they return -1 on error, and the error number is retrieved with a separate getLastError() call. This is done for legacy reasons (I'm calling C functions which were originally developed without Java/RMI in mind). As suggested, I'll have to call getLastError() immediately after an error occurs, and return the negative value of the error code rather than just -1. I've got about 200 remote methods to modify, so I was trying to avoid this, but hey... it's mostly search/replace.
Thanks for the help.

Recovery from imported tape media fails and causes DPM management console to crash with ID: 917

Hi.
I have a newly installed DPM 2012 R2 on a Windows 2012 R2 with a standalone dedicated SQL server which is causing me a bit of a headache right now.
I'm about to restore some files from an imported tape media, the tape is from our previous DPM server (DPM 2010). I have identified the media and cataloged it and i'm able to browse it to choose wich files to restore. But as soon as i try to
finish up a restore job it causes the console to crash.
My server is running just fine with backups and restores from i.e tapes that is backed up by this server - no problem there - but imported is not working.
Below is the message from console when it crashes.
Connection to the DPM service has been lost.
Review the application event log for information about a possible service shutdown. Verify that the following services are not disabled:
            DPM
            DPM Replication Agent
            SQLAgent$MSSQLSERVER
            MSSQL$MSSQLSERVER
            Virtual Disk Service
            Volume Shadow Copy
ID: 917
Any ideas?
//Dan

Hello,
I am having the exact same problem when trying to restore from tape on our secondary DPM server. I checked the event viewer and found event ID 943 (even though the console crash shows ID 917). The event viewer error is below:
Log Name:      Application
Source:        MSDPM
Date:          4/2/2015 9:02:55 AM
Event ID:      943
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      DPM_SERVER_NAME
Description:
The description for Event ID 943 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Unable to connect to the DPM database because the database is in an inconsistent state.
Problem Details:
<FatalServiceError><__System><ID>19</ID><Seq>98909</Seq><TimeCreated>4/2/2015 2:02:55 PM</TimeCreated><Source>DpmThreadPool.cs</Source><Line>163</Line><HasError>True</HasError></__System><ExceptionType>DBCorruptionException</ExceptionType><ExceptionMessage>DLS
error: SP='dbo.prc_ARM_DataSource_GetServerName' Error=50001</ExceptionMessage><ExceptionDetails>Microsoft.Internal.EnterpriseStorage.Dls.DB.DBCorruptionException: DLS error: SP='dbo.prc_ARM_DataSource_GetServerName' Error=50001
   at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ValidateReturnValue(String errorTitle)
   at Microsoft.Internal.EnterpriseStorage.Dls.PRMCatalog.DatasourceHelper.GetDatasourceServerName(SqlContext sqlCtx, Guid datasourceId)
   at Microsoft.Internal.EnterpriseStorage.Dls.PRMCatalog.PrmCatalog.GetDatasourceServerName(Guid datasourceId)
   at Microsoft.Internal.EnterpriseStorage.Dls.Intent.Datasource.FillAppSpecificPropertiesForFS(ProtectionConfigType protectionConfig)
   at Microsoft.Internal.EnterpriseStorage.Dls.Intent.Datasource.SetDestinationConfig(IMCatalogDB imCatalog, DatasetType dataset, RecoveryInformationType recoveryInformation, RecoveryTaskDefinitionType recoveryTaskDefinition)
   at Microsoft.Internal.EnterpriseStorage.Dls.Intent.Datasource.AddRecoveryTaskDefinitionForDataset(IMCatalogDB imCatalog, JobTranslator jobTranslator, DatasetType dataset, RecoveryInformationType recoveryInformation, Boolean additionalRestore, Boolean
isSerial, Guid parentTaskDefId)
   at Microsoft.Internal.EnterpriseStorage.Dls.Intent.Datasource.GenerateRecoveryTaskDefinitions(IMCatalogDB imCatalog, JobTranslator jobTranslator, RecoveryInformationType recoveryInformation, Guid parentTaskDefId)
   at Microsoft.Internal.EnterpriseStorage.Dls.Intent.RecoveryTranslator.GenerateRecoveryTaskDefinitionsRecursively(IMCatalogDB imCatalog, JobTranslator jobTranslator, RecoveryInformationType recoveryInformation, Guid parentTaskDefId)
   at Microsoft.Internal.EnterpriseStorage.Dls.Intent.RecoveryTranslator.GenerateRecoveryTaskDefinitions(IMCatalogDB imCatalog, RecoveryInformations recoveryInformations)
   at Microsoft.Internal.EnterpriseStorage.Dls.Intent.RecoveryTranslator.StartRecovery(Guid jobDefinitionId, Guid jobId, RecoveryInformations recoveryInformations, AdhocJobsContext jobContext)
   at Microsoft.Internal.EnterpriseStorage.Dls.Intent.RecoveryTranslator.StartRecovery(String recoveryXml, Guid jobDefinitionId, Guid jobId, AdhocJobsContext jobContext)
   at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CIntentServices.TriggerRecovery(UInt16* bstrIMCatalogXml, _GUID jobDefinitionId, _GUID jobId, AdhocJobsContext jobContext)
   at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CCoreServices.TriggerRecovery(CCoreServices* , UInt16* bstrRecoveryInformationXml, _GUID jobDefinitionId, _GUID jobId, UInt16* bstrJobContextXml, tagSAFEARRAY** exceptionResult)</ExceptionDetails></FatalServiceError>
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSDPM" />
    <EventID Qualifiers="0">943</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-04-02T14:02:55.000000000Z" />
    <EventRecordID>17544</EventRecordID>
    <Channel>Application</Channel>
    <Computer>DPM_SERVER_NAME</Computer>
    <Security />
</System>
<EventData>
    <Data>Unable to connect to the DPM database because the database is in an inconsistent state.
Problem Details:
<FatalServiceError><__System><ID>19</ID><Seq>98909</Seq><TimeCreated>4/2/2015 2:02:55 PM</TimeCreated><Source>DpmThreadPool.cs</Source><Line>163</Line><HasError>True</HasError></__System><ExceptionType>DBCorruptionException</ExceptionType><ExceptionMessage>DLS
error: SP='dbo.prc_ARM_DataSource_GetServerName' Error=50001</ExceptionMessage><ExceptionDetails>Microsoft.Internal.EnterpriseStorage.Dls.DB.DBCorruptionException: DLS error: SP='dbo.prc_ARM_DataSource_GetServerName'
Error=50001
   at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ValidateReturnValue(String errorTitle)
   at Microsoft.Internal.EnterpriseStorage.Dls.PRMCatalog.DatasourceHelper.GetDatasourceServerName(SqlContext sqlCtx, Guid datasourceId)
   at Microsoft.Internal.EnterpriseStorage.Dls.PRMCatalog.PrmCatalog.GetDatasourceServerName(Guid datasourceId)
   at Microsoft.Internal.EnterpriseStorage.Dls.Intent.Datasource.FillAppSpecificPropertiesForFS(ProtectionConfigType protectionConfig)
   at Microsoft.Internal.EnterpriseStorage.Dls.Intent.Datasource.SetDestinationConfig(IMCatalogDB imCatalog, DatasetType dataset, RecoveryInformationType recoveryInformation, RecoveryTaskDefinitionType recoveryTaskDefinition)
   at Microsoft.Internal.EnterpriseStorage.Dls.Intent.Datasource.AddRecoveryTaskDefinitionForDataset(IMCatalogDB imCatalog, JobTranslator jobTranslator, DatasetType dataset, RecoveryInformationType recoveryInformation, Boolean additionalRestore, Boolean
isSerial, Guid parentTaskDefId)
   at Microsoft.Internal.EnterpriseStorage.Dls.Intent.Datasource.GenerateRecoveryTaskDefinitions(IMCatalogDB imCatalog, JobTranslator jobTranslator, RecoveryInformationType recoveryInformation, Guid parentTaskDefId)
   at Microsoft.Internal.EnterpriseStorage.Dls.Intent.RecoveryTranslator.GenerateRecoveryTaskDefinitionsRecursively(IMCatalogDB imCatalog, JobTranslator jobTranslator, RecoveryInformationType recoveryInformation, Guid parentTaskDefId)
   at Microsoft.Internal.EnterpriseStorage.Dls.Intent.RecoveryTranslator.GenerateRecoveryTaskDefinitions(IMCatalogDB imCatalog, RecoveryInformations recoveryInformations)
   at Microsoft.Internal.EnterpriseStorage.Dls.Intent.RecoveryTranslator.StartRecovery(Guid jobDefinitionId, Guid jobId, RecoveryInformations recoveryInformations, AdhocJobsContext jobContext)
   at Microsoft.Internal.EnterpriseStorage.Dls.Intent.RecoveryTranslator.StartRecovery(String recoveryXml, Guid jobDefinitionId, Guid jobId, AdhocJobsContext jobContext)
   at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CIntentServices.TriggerRecovery(UInt16* bstrIMCatalogXml, _GUID jobDefinitionId, _GUID jobId, AdhocJobsContext jobContext)
   at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CCoreServices.TriggerRecovery(CCoreServices* , UInt16* bstrRecoveryInformationXml, _GUID jobDefinitionId, _GUID jobId, UInt16* bstrJobContextXml, tagSAFEARRAY** exceptionResult)</ExceptionDetails></FatalServiceError>
</Data>
    </EventData>
</Event>
I'm guessing if you checked your event viewer, you would have the same error after the crash. I'm hoping Microsoft has a fix for this besides restoring the database...

DPM 2012 R2 UR4 Console Constantly Crashing

I have a case open with Microsoft regarding this and despite working on it for a week straight, they haven't been able to figure out the problem. I'm in the process of escalating it, but in the meantime I thought I'd see if anyone can help point us
in some sort of direction.
About two months ago I started seeing these console crashes, but they were very infrequent, maybe once or twice a week. In the past 2-3 weeks, they have increased in frequency, occurring anywhere from every 5 minutes to once an hour. The console
only crashes when jobs are running. I can't pinpoint any event that triggered these crashes, however, they seemed to increase in frequency after we had a power outage a few weeks ago. Over the last week and a half, the crashes are so frequent that
it is impossible to get any complete backups. Microsoft support has examined the DPM logs, run SQL traces and made some tweaks as far as timeouts but the crashes continue. They tell me the issue is that there are "timeouts" when DPM is
connecting to its database.
If anybody has any ideas, I'd love to hear them and I'd be happy to provide any more information. We are in a really bad situation at this point. We have 50 TB of data, so I really don't want to build a new server and start over.
The follwing is the error in the Application Log which I see every time the console crashes:
"The description for Event ID 940 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Unable to connect to the database because of a fatal database error. It is unlikely that the database itself has been damaged. Review the event log and take appropriate action. Make sure that SQL Server is running.
Problem Details:
<FatalServiceError><__System><ID>19</ID><Seq>119</Seq><TimeCreated>11/22/2014 5:56:29 PM</TimeCreated><Source>DpmThreadPool.cs</Source><Line>163</Line><HasError>True</HasError></__System><ExceptionType>SqlException</ExceptionType><ExceptionMessage>A
transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The semaphore timeout period has expired.)</ExceptionMessage><ExceptionDetails>System.Data.SqlClient.SqlException (0x80131904): A transport-level
error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The semaphore timeout period has expired.) ---> System.ComponentModel.Win32Exception (0x80004005): The semaphore timeout period has expired
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
at System.Data.SqlClient.TdsParserStateObject.ReadSniSyncOverAsync()
at System.Data.SqlClient.TdsParserStateObject.TryReadNetworkPacket()
at System.Data.SqlClient.TdsParserStateObject.TryPrepareBuffer()
at System.Data.SqlClient.TdsParserStateObject.TryReadByte(Byte& value)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.InternalExecuteReader()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteReader()
at Microsoft.Internal.EnterpriseStorage.Dls.TaskExecutor.DB.Task.GetInstance(Guid taskID)
at Microsoft.Internal.EnterpriseStorage.Dls.ArmCommon.CommonLoop.WakeupReceived(Message msg)
at Microsoft.Internal.EnterpriseStorage.Dls.TaskExecutor.Fsm.Engine.ChangeState(Message msg)
at Microsoft.Internal.EnterpriseStorage.Dls.TaskExecutor.TaskInstance.Process(Object dummy)
at Microsoft.Internal.EnterpriseStorage.Dls.TaskExecutor.FsmThreadFunction.Function(Object taskThreadContextObj)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
ClientConnectionId:19a70934-5124-43d7-a55a-11680fb594de</ExceptionDetails></FatalServiceError>
the message resource is present but the message is not found in the string/message table"

It appears I've finally found what's causing this. When we had our power outage a few weeks ago, one of our iSCSI NAS devices had a problem and we lost a volume for DPM. We fixed it, but had to remove all the sources in DPM that had
data stored on the problem volume, and added them back to the new volume we created.
Yesterday, I discovered that the problem volume was still showing in Windows Disk Management as missing even though it was completely gone from the DPM console. On a hunch, I removed the missing volume from Disk Manager, DPM has been stable (going
on 15 hours now.)
As usual, it seems obvious now that I've found the problem...I just wish Microsoft could have pointed me in the right direction given all the logs and sql traces they've been examining.
George Moore

Webkit2webprocess.exe on Windows 7 x64 continues crashing

Normally, I LOVE Safari (latest version) as my Google Chrome replacement when Chrome doesn't work. Firefox being slow (at least for me, and buggy, same with whatever version of IE is out there). However, whenever I access, just one site in particular, only seems to happen on this specific website Safari crashes (which it really doesn't I just hit close program and it resumes working like normal without actually closing Safari), but then this Webkit2webprocess.exe window pops up telling me it has crashed. I hit close program and the site reloads and it immediately crashes again. The website in particular is http://www.gameinformer.com/p/replay.aspx. Other sites like facebook, gmail, and hotmail occassionally do the same thing but that is VERY infrequent. It seems game informer's website is the major culprit (and I love this site for my gaming news).
System Specs:
Windows 7 x64
6 GB RAM
2TB HDD
Nvidia GeForce 8800 GTS (512 MB) video card
intelcore i7 3.2 Ghz cpu
Is there a way to fix this, and please don't waste my time with 'Just use Google Chrome or other browser' I like Safari alot except for this darned Webkit2 thing that doesn't have a clear purpose (and if it does, let me know what the point of it is). Thanks!

The website in particular ishttp://www.gameinformer.com/p/replay.aspx. Other sites like facebook, gmail, and hotmail occassionally do the same thing but that is VERY infrequent. It seems game informer's website is the major culprit (and I love this site for my gaming news).
Interesting. It's cranky on my 7 x64 system too, although I don't get the webkit2webprocess.exe crash.
I cranked up the error console (in Safari) for the page, and it complains about the javascript being used for the Google plusone button. So it could be that your webkit2webprocess.exe is being unusually sensitive to that ... although it's not clear why your one dies when mine doesn't.
Are you able to do a "Help > Report Bugs to Apple" from the page before it crashes?

Bookmarks window & Error Console both crash in 4 seconds.

Similar Messages

Maybe you are looking for