Boot/bcd error 0xc0000225

hello
Product name: HP Pavilion dv6 Notebook PC
Product number: A6N87EA#A2N
i want to fix my hp recovery manger but when i start at the boot and press f11 but when it open it shows an error 0xc0000225 plzzz how to fix this problem

Dear sir F8 key are not working but I will insert bootable USB and go to the command prompt the enter
bootrec /rebuildbcdand the screen shows the following msgX: bootrec /rebuildbcdRepairs critical disk structures. The follwoing commands are supported:/FixMbr -- writes the master bootrecord of the system partition using master boot record compatible with Windows 7. this operation does not overwrite the existing partition table./FixBoot -- write a new boot sector onto the system partition using the boot sector compatble with Windows7. /ScanOs -- scan all disks for installtions compatible with Windows and display the entries that are currently not in the boot configuration store. /RebuildBcd -- scan all disks for instaltions compatible with Windows 7 and allow the urse to choose which to add to the boot configuration store. So what is the next step please inform me Regards

Similar Messages

All Windows I Install return boot\bcd error

Have a l645d-s4040.
Im Lost now.. I've read many threads similar to my problem, or exactly like my problem. Ive tried it all, and done at least 12 Different installs. heres the info:
Bought it brand new, was unaware of making the restoration disks until it was too late.
I had a virus, so I did "clean all" in diskpart, at the cmd prompt. So i can start fresh. I have a retail version of Windows 7 Home Premium 64 bit, which was the original OS. went through the installation process fine, until the reboot where its supposed to go through the second step of the installation. on reboot i get a "bcd\boot" error. Ive tried repairing the MBR, the Boot record, ive tried using align=1024, ive tried using paragon, and acronis to fix the boot record. Ive tried using boot managers. Ive tried installing windows vista, ive tried windows 7 ultimate 64 and 32 bit versions.. the only OS i can get to install is XP.. Im at a loss
of course of done : Startup Repair (http://www.sevenforums.com/tutorials/681-startup-repair.html)
So after the first step of of installation, which goes fine then reboots to continue the installation i get:
Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click “Next.”
3. Click “Repair your computer.”
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configurations data.
Enter= Continue ESC=Exit
so i reboot with the install cd. which i downloaded from www.mydigitallife.info/windows-7-iso-x86-and-x64-official-direct- download-links-ultimate-professional-and-home-premium/.
And ran the startup repair, first time no OS found and failed to save startup options. rebooted and this time the repair worked and it booted fine running the 2nd step of the installation process.. on the reboot i got same boot\bcd error.. so i repeated the repair steps above.. it finally booted and finalized the installation.. i got to the desktop fine and installed all my drivers. when i rebooted i got the same error.
WHATS UP WITH THIS???

Satellite L645D-S4040
I would restore the hard disk to its original out-of-the-box contents using Toshiba recovery media, which you can obtain from Toshiba.
Order Toshiba Recovery Media
-Jerry

Recovery Disk Install will not boot ends with \Boot|BCD error

Hi
I have a Compaq Presario CQ56-219WM with Win7 64bit
The OS needed to be reloaded but the F11 recovery option was not working so I purchased the Factory Recovery DVD's from HP.
When I go through the install procedure with the factory DVD's the sytem is disk is reformatted and programs loaded but the system refuses to boot... it always ends with an error message say that it can not read \BOOT\BCD
I found a genuine Win7 pro DVD from another system and tried to run the repair options but that did not change the error
It seems that the factory recovery disk really don't work in all cases. Can anyone help with this?
Thank you

Boot from the Win 7 disc and try the suggestion here:
http://www.sevenforums.com/hardware-devices/82226-boot-bcd-0xc000000d-unreadable-boot-configuration-...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Boot\BCD error - SCCM 2012 R2

Hi,
This is a last ditch attempt before I throw in the towel and rebuild the server.
I am running an SCCM 2012 R2 Hierarchy with two primaries and multiple distribution points.
One of our main DPs has started coming up with an error when pxe booting a windows 7 machine. This happened after a corrupt driver was added to the boot image. The driver was removed and all the DP's rolled back but the issue still remains on this server
alone. We use an IPhelper to point the pxe requests at this server.
The error message is:
File: \Boot\BCD
Status: 0xc0000098
Info: The Windows Boot Configuration Data file does not contain a valid OS entry.
I have tried the following:
1. Removing the PXE role and reapplying it.
2. Removing the Boot images and reapplying them.
3. Removing the DP altogether from the console and reapplying.
4. Removing all data from the DP and starting again.
5. Redistributing the boot images. both x86 and x64
6. creating a new boot image for both x86 and x64 and applying those.
smspxe log is as follows
D4:3D:7E:BF:11:A4, 00000000-0000-0000-0000-D43D7EBF11A4: device is not in the database.
SMSPXE 20/10/2014 09:30:44
5064 (0x13C8)
Warning: Matching Processor Architecture Boot Image (0) not found
SMSPXE 20/10/2014 09:30:44
5064 (0x13C8)
D4:3D:7E:BF:11:A4, 00000000-0000-0000-0000-D43D7EBF11A4: Not serviced.
SMSPXE 20/10/2014 09:30:44
5064 (0x13C8)
Warning: Matching Processor Architecture Boot Image (0) not found
SMSPXE 20/10/2014 09:31:04
5064 (0x13C8)
D4:3D:7E:BF:11:A4, 00000000-0000-0000-0000-D43D7EBF11A4: Not serviced.
SMSPXE 20/10/2014 09:31:04
5064 (0x13C8)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 09:33:20
2208 (0x08A0)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 09:33:20
2208 (0x08A0)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 10:33:20
5012 (0x1394)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 10:33:20
5012 (0x1394)
Found new image CAS00004 SMSPXE
20/10/2014 10:53:11 6076 (0x17BC)
ADK installation root registry value not found.
SMSPXE 20/10/2014 10:53:11
6076 (0x17BC)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 10:53:11 6076 (0x17BC)
Opening image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 10:53:11
6076 (0x17BC)
Found Image file: D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
PackageID: CAS00004
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 10:53:11 6076 (0x17BC)
Closing image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 10:53:11
6076 (0x17BC)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 10:53:40
6076 (0x17BC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 10:53:40
6076 (0x17BC)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 10:58:12
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 10:58:12
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 10:59:07
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 10:59:07
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:00:05
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:00:05
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:05:24
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:05:24
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:06:05
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:06:05
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:07:15
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:07:15
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:07:58
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:07:58
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:09:31
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:09:31
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:11:58
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:11:58
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:13:52
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:13:52
4664 (0x1238)
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
SMSPXE
20/10/2014 11:15:27 5064 (0x13C8)
E8:03:9A:B3:F3:8A, 163A84E0-1DD8-11B2-8000-DF82815C2DDB: device is not in the database.
SMSPXE 20/10/2014 11:15:27
5064 (0x13C8)
Getting boot action for unknown machine: item key: 2046820364
SMSPXE 20/10/2014 11:15:27
5064 (0x13C8)
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820364" ServerName=""><Machine><ClientID>47938388-164c-4bfb-8621-28b57859ad3c</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="PNL20009" OfferIDTime="26/02/2014 15:13:00" PkgID="PNL0000C" PackageVersion="" PackagePath="http://INTCMNCLDP001.intraining.co.uk/SMS_DP_SMSPKG$/CAS00004"
BootImageID="CAS00004" Mandatory="0"/></ClientIDReply>
SMSPXE
20/10/2014 11:15:27 5064 (0x13C8)
E8:03:9A:B3:F3:8A, 163A84E0-1DD8-11B2-8000-DF82815C2DDB: found optional advertisement PNL20009
SMSPXE 20/10/2014 11:15:27
5064 (0x13C8)
Getting boot action for unknown machine: item key: 2046820364
SMSPXE 20/10/2014 11:16:14
5064 (0x13C8)
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820364" ServerName=""><Machine><ClientID>47938388-164c-4bfb-8621-28b57859ad3c</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="PNL20009" OfferIDTime="26/02/2014 15:13:00" PkgID="PNL0000C" PackageVersion="" PackagePath="http://INTCMNCLDP001.intraining.co.uk/SMS_DP_SMSPKG$/CAS00004"
BootImageID="CAS00004" Mandatory="0"/></ClientIDReply>
SMSPXE
20/10/2014 11:16:14 5064 (0x13C8)
E8:03:9A:B3:F3:8A, 163A84E0-1DD8-11B2-8000-DF82815C2DDB: found optional advertisement PNL20009
SMSPXE 20/10/2014 11:16:14
5064 (0x13C8)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:26:15
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:26:15
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:27:12
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:27:12
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:27:25
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:27:25
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:28:36
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:28:36
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:29:41
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:29:41
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:30:43
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:30:43
4664 (0x1238)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:33:20
4664 (0x1238)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:33:20
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:33:51
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:33:51
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:35:31
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:35:31
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:37:29
6076 (0x17BC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:37:29
6076 (0x17BC)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:39:25
6076 (0x17BC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:39:25
6076 (0x17BC)
================= PXE Provider shutdown. =====================
SMSPXE 20/10/2014 11:42:25
4700 (0x125C)
================= PXE Provider loaded. =====================
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Machine is running Windows Longhorn. (NTVersion=0X603, ServicePack=0)
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Initializing PXEPerfObject. SMSPXE
20/10/2014 11:43:19 4372 (0x1114)
Could not load logging configuration for component ccmperf. Using default values.
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
HTTP is selected for Client. The current state is 0.
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
SMSPXE
20/10/2014 11:43:20 4372 (0x1114)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
20/10/2014 11:43:20 4372 (0x1114)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
20/10/2014 11:43:20 4372 (0x1114)
Adding CAS00004.40 SMSPXE
20/10/2014 11:43:20 4372 (0x1114)
Adding CAS00005.45 SMSPXE
20/10/2014 11:43:30 4372 (0x1114)
Found new image CAS00004 SMSPXE
20/10/2014 11:43:44 4372 (0x1114)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:43:44
4372 (0x1114)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:43:44 4372 (0x1114)
Opening image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 11:43:44
4372 (0x1114)
Found Image file: D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
PackageID: CAS00004
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 11:43:44 4372 (0x1114)
Closing image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 11:43:44
4372 (0x1114)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:44:34
2028 (0x07EC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:44:34
2028 (0x07EC)
Found new image CAS00005 SMSPXE
20/10/2014 11:44:56 4372 (0x1114)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:44:56
4372 (0x1114)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:44:56 4372 (0x1114)
Opening image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:44:56
4372 (0x1114)
Found Image file: D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
PackageID: CAS00005
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 11:44:56 4372 (0x1114)
Closing image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:44:57
4372 (0x1114)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:45:45
2028 (0x07EC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:45:45
2028 (0x07EC)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:45:54
4372 (0x1114)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:45:54
4372 (0x1114)
PXE Provider finished loading. SMSPXE
20/10/2014 11:45:54 4372 (0x1114)
Error opening file: D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim. Win32=32
SMSPXE 20/10/2014 11:46:33
4744 (0x1288)
Retrying D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:46:33
4744 (0x1288)
Boot image CAS00005 has changed since added
SMSPXE 20/10/2014 11:46:36
4744 (0x1288)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:46:36
4744 (0x1288)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:46:36 4744 (0x1288)
Opening image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:46:36
4744 (0x1288)
Found Image file: D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
PackageID: CAS00005
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 11:46:36 4744 (0x1288)
Closing image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:46:36
4744 (0x1288)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:46:53
2028 (0x07EC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:46:53
2028 (0x07EC)
Boot image CAS00005 has changed since added
SMSPXE 20/10/2014 11:47:50
4744 (0x1288)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:47:50
4744 (0x1288)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:47:50 4744 (0x1288)
Opening image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:47:50
4744 (0x1288)
Found Image file: D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
PackageID: CAS00005
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 11:47:50 4744 (0x1288)
Closing image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:47:50
4744 (0x1288)
================= PXE Provider shutdown. =====================
SMSPXE 20/10/2014 11:47:58
4372 (0x1114)
================= PXE Provider loaded. =====================
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Machine is running Windows Longhorn. (NTVersion=0X603, ServicePack=0)
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Initializing PXEPerfObject. SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
Could not load logging configuration for component ccmperf. Using default values.
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
HTTP is selected for Client. The current state is 0.
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
Adding CAS00004.40 SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
Adding CAS00005.45 SMSPXE
20/10/2014 11:48:50 5008 (0x1390)
Found new image CAS00004 SMSPXE
20/10/2014 11:49:15 5008 (0x1390)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:49:15
5008 (0x1390)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:49:15 5008 (0x1390)
Opening image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 11:49:15
5008 (0x1390)
If anyone has any further info on this please can you let me know?
Thanks so much.
Katie

Hello,
Is your WDS running properly? If WDS is stopped, can you start it manually?
Or you get an error like 'The service did not respond in a timely fashion'?
The symptom is so similar to that I have encountered. You referred that you have tried to remove WDS, DP, but I wonder how. Before removing WDS and DP role, try to delete corrupt package in SCCMContentLib folder.
I just recreated SCCMContentLib, and WDS did start working. I guess there are corrupt packages in the my folder as well. But another problem occur, I installed all the roles on the same server in my lab, so it is a primary site server as well. As a result,
it seems that I have to re-deploy all the packages. Not sure if there is any further problem yet. Since it is just a lab environment, it doesn't matter for me.
I hope what I have done will give you some clue.

S440 problem downgrading to Win7 - /boot/BCD error

HI,
I´m trying to downgrade to Win 7 prof on a new S440.
I have downloaded Win7 Prof 64bit from MS site, disabled Secure Boot in the Bios, but when booting Win 7 on external DVD drive, it quickly ends in a black screen telling:
Windows faild to start .....
File: \EFI\Microsoft\Boot\BCD
Status: 0xc0000000d
Info: An error occured while attempting to read the boot configuration.
Trying to boot from a DVD having a Win 7 Home 64 bit, which works on "normal machines", it simply freezews during loading Windows to RAM. This seems to have somwething to do with the new UEFI.
This is a show stopper, and cant uderstand why Lenovo do not provide a prober guide of how to down grade to Win 7.
Apåart from this, there is no serial number writte at the buttom of the machine, meaning, we have to call Microsoft and convince them to give ua a key for Wint 7 prof.

Answered in other threads
http://social.answers.microsoft.com/Forums/en-US/vistarepair/thread/1920f1c8-a1d3-416c-b03b-ca998f6cec7a
http://social.answers.microsoft.com/Forums/en-US/vistaperformance/thread/3df8c662-2076-4d1a-8e3e-7fbabc800445
Rgds
Milos

Windows 7 not booting. Says File:\Boot\BCD error

HI, I have purchased a HP Pavilion DMZ1 XL303AV laptop. I had got it serviced from a HP service centre as it had suffered water spillage. The service centre replaced the entire motherboard. Now, the laptop suddenly stopped working. It gives an error message: File : \Boot\BCD; Status 0xc00000e9 ; Info: AN unexpected I/O error has occured. It says if you receive this error, please contact hardware manufacturer.
I donot have a Recovery CD for this model. HP did not provide. I donot remember creating a recovery USB drive for this (This model has no CD/DVD drive).
The machine is not working . Please help

Hi SyedAR, I am sorry to hear that you are getting this error on your computer. I would strongly suggest that you contact HP Total care at 1-800-474-6836 or at this link if the number is outside your calling area. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html From what I can see from this error, you are going to need the recovery disks for the Windows operating system and you can get them from HP Total care. They will also be able to walk your through repairing your computer once you have the disks.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

\Boot\BCD error (0x000014c)

Here's the full story. A friend of mine gave me their laptop because they weren't able to get it to boot. It was having the "BOOTMGR is compressed" error, so I booted up my MiniPE and uncompressed the drive. After uncompressing, I restarted the computer and it booted up just fine. Once inside Windows, I went to Shut Down...Restart the computer. Once it rebooted, instead of going to Windows I get the error as follows:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart the computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
File: \Boot\BCD
Status: 0xc000014c
Info: An error occurred while attempting to read the boot configuration data.
Alright, so I've seen this error a bunch of times before. Until now, I had only ever seen this error on Vista machines and I've read that it can happen to Win 7 users, too. The problem is, this computer is running Windows XP SP3.
When my buddy bought this laptop (HP Mini 1000... the really tiny one with no built-in DVD/CD and only has a 16GB SanDisk pSSD drive), he opted to buy the Windows XP Downgrade directly from HP. This computer normally runs Vista (I don't know how with its specs) but this one was imaged by HP for Windows XP.
Is there a solution for this for XP users? I've already run CHKDSK which corrected a lot of errors, and I've already run an MBRFIX which didn't do squat. I wouldn't normally hesitate to run a Repair on the OS, but HP didn't send him any operating system discs. If I use a TechNet XP Home SP3 cd, I don't think it will accept his product key (damn HP OEM).
Any suggestions?
P.S. This isn't related, but what's with all the healthpills posts advertising online pharmaceuticals? Do they really think anyone who frequents tech support forums are gonna follow that link? :o

Actually it is not hard to fix this this problem
What you will need to fix it is :
1- A 2gig flashdrive (I used a 2g and it worked,not sure if any other size works)
First visit this link https://www.dropbox.com/s/t88gryfudq3741n/RepairDiscWindowsVista32-bit.iso (Thats my dropbox which contains the Windows vista Iso DO NOT EXTRACT IT , just put it on your desktop and leave it there.
2-Visit this link and download and download the usb installer(On the bottom of the page it will mark Download uii in a blue box) , this will turn your flashdrive into a bootable flash drive http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/
3-Run the program and it should look like this http://www.flickr.com/photos/100773530@N06/
(Make sure you select Windows Vista Installer and note that this will not reset anything on your victim Computer )
4-Now in the select your iso option in the program select the iso which you downloaded from my dropbox by selecting browse AGAIN DO NOT EXTRACT
5-Now put your flashdrive in your computer and select the drive And when everything is done it should look like this http://www.flickr.com/photos/100773530@N06/
6-Now select create and note that THIS WILL FORMAT YOUR FLASHDRIVE\
7-Now you have a bootable flashdrive
8-Now insert your flashdrive into yoor victim computer and go into your Bios and set your usb as your first boot device by moving it first in the order (If you dont know how to do this visit this link) - http://www.youtube.com/watch?v=C8VZ95_XFA8
9-Now restart your computer and it should mark Windows is Loading files on bottom of the screen Just leave your victim computer like this for about 10 - 15 minutes and it should just have a blank screen without the user accounts.
10-Restart your computer by pressing the button on the Tower and select Last known Good Configiration DO NOT TAKE OUT YOUR FLASHDRIVE and your computer will start normally
11-Take out your flashdrive and restart computer again and you are good to go
When this works please vote thats all i ask Hope I helped you

NB200 recovery media error 0xc0000225

Toshiba NB200 Part Number PLL28A-007012. (Windows 7 starter)
Using Recovery Media Creator from within Win7 and writing to a Sandisk Cruzer Titanium 8Gb USB drive.
The Recovery Media Creator functions and completes the task without errors.
After changing the boot sequence to USB first, the PC boots from the 8Gb USB drive and almost immediately stops and shows this on the screen:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your language setting, and then click "next"
3. Click "repair your computer."
If you do not have this disc contact your sys admin or computer manufacturer.
File: \Boot\BCD
Status: 0xc0000225
Info: An error occurred while attempting to read the boot configuration data.
I attempted using the Recovery Media Creator twice on the same USB drive with the same result both times.
The USB drive was emptied before each creation.
So, the problem is, the USB Recovery Media will not boot due to the 0xc0000225 error.
Could someone please offer a solution to this problem?.
Many thanks

Its an NB200 (netbook) with no optical drive, and I don't have an external drive to try.
I could try another USB memory stick, but the only other one I have big enough is a 16Gb Titanium Cruzer, as opposed to the 8Gb Ti Cruzer I was using.
So I could empty the 16Gb or go pick up a cheaper one, if nothing more comes from this forum.
cheers

Error 0xc0000225

Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
File: \Boot\BCD
Status: 0xc0000225
Info: An error occurred while attempting to read the configuration data.
________________________________________How can I fix this problem?It runs Windows 7 Home Premium(64-bit).

Press F8 at startup to bring up the WinRE and select "Repair your computer". At the next menu, open a command prompt and type in the following:
bootrec /rebuildbcd
and press enter. if it asks you about windows installations, select "Y" or "A". after that, you should be able to boot back into windows.

\Boot\BCD bootup error and possible need to recover extra D: partition files

I started up my 10-month old Toshiba Latitude P750-BT4G22 and plugged in an HDMI cable from my television before the bootup process had finished. Oooops! Suddenly, the computer died, and when I tried to restart it, I saw the following message:
Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click “Next.”
3. Click “Repair your computer.”
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configurations data.
Enter= Continue ESC=Exit
My computer is set up with a virtual C: drive containing Windows and a virtual D: drive (partition) containing all of my important files that I would like to NOT lose.
Any idea how I might salvage this situation? If I have to use recovery disks, can I ensure that the D: drive is not touched and will remain intact? (Clearly I don't want to return to a factory state, because I reformatted the hard drive when I first received it and made the D: partition to store my important files.)
Bud

I did manage to use the rebuildbcd command..
For others viewing this thread..
Use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issu...
-Jerry

Laptop wont start - \Boot\BCD 0xc000000f

So I did a Windows update, then restarted and now this error appears. I also deselected "Enable tab groups" in Internet Options under tab settings. I dont know if this could affect it but thats all the changes I did since the last restart, I cant think of anything else except for Windows and McAfee updates. I have Vista 32, Satellite laptop, McAfee firewall. Does model matters? On the sticker there's A500 - 13F
This is what I get. I was already googling for this error but I cant find anything useful other than same questions.
Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1.   Insert your Windows installation disc and restart your computer.
2.   Choose your language settings, and then click “Next.”
3.   Click “Repair your computer.”
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configurations data.
Enter= Continue     ESC=Exit
I dont have this boot CD and no blank CDs or DVDs to burn on until I buy some tomorrow. I also dont have any installation disk, the OS was already installed and I dont remember getting any recovery disk with it (unless if I lost it). What can I do? Is using boot CD the only option?
Now I've tried F12 for Boot menu. I get 3 options, HDD1/SSD1, CD/DVD and LAN, but none of them work, I still get the same error screen. I've also tried with F8 after reading few posts with the same error, but I still end with the same error message. F2 is for Setup but I dont find anything useful. I also have HDD recovery on D partition on the current laptop and on the other one that has this error, can this fix it?
Solved!
Go to Solution.

Hi! Has anyone that is replying on this thread created a system repair disc?? If you have boot with it and try each method to fix your problem.
http://www.dummies.com/how-to/content/how-to-use-a-system-repair-disc-to-restore-windows.html
If Windows 7 won't start or starts with significant problems, you may need to use the System Repair Disc to fix problems with Windows 7. The System Repair Disc is designed to let you boot up Windows — even if nothing else works — and provides you with several options for repairing your failing system.
You need to create the system repair disc. If you don’t create one, you limit your recovery options. The system repair disc is not the same thing as the recovery disc that came with your computer. It won’t reinstall Windows 7 and it won’t reformat your computer. It's simply a gateway to Windows' built-in recovery tools.
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

PXE problem - \boot\BCD 0x0000098 does not contain a valid OS entry

I am setting up PXE on my SCCM 2012 server. I have a seperate DHCP server running WDS(unconfigured). I have DHCP option 66 and 67 set (\boot\x86\wdsnbp.com).
I have PXE configured to recognize unknown computers. The deployment assigned to the unknown computers collection. And confirmed that the boot images are on the distribution point (only 1 distribution point in enviroment). I do not have
a SMSPXE.log on sccm server if that is any indication of anything.
My workstation boots PXE, I hit F12 and it sees the PXE server.
I get a b/w screen...
Windows boot Manager (Server IP : <IP of SCCM box> )
Windows has failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disk, contact your system administrator or your computer
manufactuer for assistance.
File: \Boot\BCD
Status : 0x0000098
Info: The Windows Boot Configuration Data file does not contain a valid OS entry.
Any suggestions to what might be the issue?
Thanks,
Kubie

Unfortunately I am in exactly the same situation but under slightly different circumstances.
We recently took delivery of 10 new systems, whilst developing a new/updated answer file the first two machines used have now developed this fault. They have been re-imaged several times, roughtly on its fouth deplyment the local machine entered this state
and we cant seem to get rid.
However any new system that hasn’t been used already is deploying correctly.
Ideas?
DHCP is MS / options:
066 Boot Server host Name: [FQDN name of the WDS server]
067 Bootfile Name: \boot\x86\wdsnbp.com (the systems and boot file we wish to use are x64)
FYI:
WDS is on same LAN subnet.
WDS is Win 2008 R2
- StatoLNL
On the 'broken' systems, try booting from USB media and then from a command prompt run diskpart and clean the disk. Then power off and try PXE again. I believe the clue is in the error message that the BCD store is kaput.
Andy
My Personal Blog: http://madluka.wordpress.com

File missing (file\BCD error code 0Xc0000034 help need for work!

file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pc

Hi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

SOLVED !? Recovery. Your (new) PC needs to be repaired. Boot configuration error code 0x0000034

I booted my new-ish laptop and immediately got an EXTREMELY serious pre-boot error.
"Recovery. Your PC needs to be repaired. The boot configuration data is missing some required information. file:\BCD error code 0x0000034. ... press ESCAPE to go to (pre-)boot menu." (and laptop turns off after 20 secs)
After pressing ESC and getting the (pre-)boot menu, NOTHING I tried worked !! Tried several times.
I had to use a 6 inch e-reader to access the web. After a long long search and finding little of use, I found an obscure forum post that said to press 0 during the Toshiba pre-boot.
After a long wait. That gave me the Win 8.1 maintenance window. I followed the advanced options to auto-repair my laptop. After a long wait it told me:
"Could not repair PC" !!!???
I decided to click the reboot menu from this win 8.1 windows. It was basically my only option left.
After a long reboot, it seems to have worked !?? Some of my Win 8.1 settings have been lost AGAIN; e.g. task manager default viewing settings.
CONLUSIONS (brief):
- Not having a recovery USB
- Not having a recovery DVD (useless since Win 8.1 deactivated this)
- Not having the Win 8.1 install disk
- Not knowing the pre-boot press 0 key trick
- MAKE SURE you have a recovery USB for your system (cannot use a DVD on win 8.1)
- Don't believe Win 8.1 statements saying can't repair PC !!??
I never expected this from Toshiba and a non-cheap laptop.
Satellite P70-A PSPLPC-01Y007 Win 8.1 Purchased 3 months ago.
Solved!
Go to Solution.

Satellite E45t-A4300 part number PSUB2U-00K00P
Press f12 then advanced options, then Automatic repair or other options listed below:
From page 115 of your user manual-
Advanced options
Choosing this option presents you with another set of
options:
System Restore
❖ System Restore allows you to use a Restore point to
return the computer to a state at which it was performing
properly. Restore points are created:
❖ When new hardware or software is installed
❖ Manually by the user
System Image Recovery
Windows® will “Recover” the Operating system using a
specific image provided by the user.
116 If Something Goes Wrong
The Windows® operating system is not working
Automatic Repair
This feature automates the repair process. The Operating
System will automatically look for problems and repair them
if possible.
Command Prompt
The command prompt is a very powerful tool for advanced
users.
Startup Settings
In previous Operating Systems the majority of the options
found on this menu were available by pressing the F8 key
during the Windows® boot process:
❖ Enable low resolution video mode
Restarts Windows® using your current video driver at low
resolution. This allows you to reset your display settings
in the event they have been improperly set.
❖ Enable debugging mode
Starts Windows® in an advanced troubleshooting mode
❖ Enable boot logging
Creates a file that lists all the drivers that are installed
during startup
❖ Enable Safe Mode
Starts Windows® with a minimal set of drivers and
services. If the computer starts and runs in Safe Mode,
you will know the Operating System is most likely
working properly and that you should look to third-party
applications or drivers for the source of your problem.
❖ Disable driver signature enforcement
Allows drivers containing improper signatures to be
installed
❖ Disable early-launch anti-malware protection
Allows drivers to initialize without being measured by the
Anti-malware driver
❖ Disable automatic restart on system failure
Prevents Windows® from automatically restarting if an
error causes it to fail. Choose this option only if
Windows® is stuck in a loop where it fails, attempts to
restart, and fails again repeatedly.
Your support page is here - Support page
Your user guide is here - User guide
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

PXE Deploy Fails - BCD Error 0xc98

When I attempt to PXE boot any machine, physical or virtual, I get an error message, the pertinent details are:
"Recovery - Your PC needs to be repaired
File: \Tmp\x86x64{GUID}.bcd
Error code: 0xc0000098"
DHCP Options were set as follows:
066: CMDP (the name of the stand-alone DP)
067: SMSboot\x64\wdsnbp.com
One of the most bizarre facts is that I was able to run a PXE install one time and then the next day, the system displayed this error.
Here are some steps I have tried to resolve the issue:
Removed and Rebuilt the DP on the Primary Site (now removed completely).
Built a stand-alone DP on Server 2012 R2 in vmware vcenter 5 and configured it for PXE boot.
Restarted the server after confirming WDS was installed and it appears to be running correctly.
Verified all content was being distributed correctly and ensured boot images were set for PXE deploy.
Installed ADK 8.1 Update, built new Boot Images and distributed them to the DP.
Rebuilt the PXE Task Sequence using both x86 and x64 Boot Images.
Changed DHCP option from x86 to x64 and back and forth.
Ensured the SCCM Admin was explicitly added to the DP as a local admin.
Made sure all SMS folders on the DP are shared to everyone with read priv's and the SMSBoot folder location was shared to allow the DHCP options to connect to the correct network path.
Resintalled the ConfigMgr Console on the site server and my tech machine.
Updated SCCM to R2 CU3.
Read dozens of similar forum posts.
Cried a little.
The SMSPXE log on the Primary Site is no longer being updated since building the new DP. Don't know which logs to check or where they would be!
I am getting close to full reinstall of SCCM -- which I really don't want to do -- but I'm running out of forum posts to follow!! Can you help me stop bashing my head against a wall - it's starting to hurt.

Based on a similar thread, I traced the issue back to the MP.
Severity   Type   Site code   Date / Time   System   Component   Message ID   Description
Error   Milestone   GBT   11/4/2014 2:52:31 PM    XXXX.XXX.LOCAL   SMS_MP_CONTROL_MANAGER   5436   MP Control Manager detected management point is
not responding to HTTP requests. The HTTP status code and text is 500, Internal Server Error.    Possible cause: Management point encountered an error when connecting to SQL Server.   Solution: Verify that the SQL Server is properly
configured to allow Management Point access. Verify that management point computer account or the Management Point Database Connection Account is a member of Management Point Role (msdbrole_MP) in the SQL Server database.    Possible cause:
The SQL Server Service Principal Names (SPNs) are not registered correctly in Active Directory Solution: Ensure SQL Server SPNs are correctly registered. Review Q829868.    Possible cause: Internet Information Services (IIS)
isn't configured to listen on the ports over which the site is configured to communicate.   Solution: Verify that the designated Web Site is configured to use the same ports which the site is configured to use.    Possible cause: The
designated Web Site is disabled in IIS.   Solution: Verify that the designated Web Site is enabled, and functioning properly.    Possible cause: The MP ISAPI Application Identity does not have the requisite logon privileges.
Solution: Verify that the account that the MP ISAPI is configured to run under has not been denied batch logon rights through group policy.    For more information, refer to Microsoft Knowledge Base article 838891.

Boot/bcd error 0xc0000225

Similar Messages

Maybe you are looking for