Boot camp assistance to install windows 8

im using a macbook pro 13-inch late 2011 with mac os x 10.7.2 which has bootcamp 4.i want to install 64-bit windows 8 on my mac.i found out you need boot camp 5 to install it.can i install windows 8 on bootcamp 4 and then update to boot camp 5 when running windows?or do i have to update to bootcamp 5 beforehand?if so,how do i do that?

From Boot Camp: System requirements for Microsoft Windows operating systems
Requirements for all Windows installations
In order to install Microsoft Windows using Boot Camp, you need the following:
An Internet connection
An administrator account in OS X to use Boot Camp Assistant
The keyboard and mouse or trackpad that came with your Mac (If they aren’t available, use a USB keyboard and mouse)
A minimum of 2 GB of RAM, 30 GB of free disk space are recommended if you are installing Windows for the first time, or 40 GB of free disk space if you are upgrading from a previous version of Windows
An authentic Microsoft Windows full install disc or ISO file
A built-in optical drive, or a compatible external optical drive is required if you are using an install disc
8 GB USB storage device, or external drive formatted as MS-DOS (FAT) to install the downloaded drivers

Similar Messages

Boot Camp error: The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Jounraled) volume or already partitioned by Boot Camp Assistant for installing Windows.

Hi!
I am getting the error:
"The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Jounraled) volume or already partitioned by Boot Camp Assistant for installing Windows."
I read up some on google, but all of them says that they have crated a partition and that is the problem, I only have the standard "Macintosh HD".
I tried to create a partition manually in disk utility but then the error message: "Partition failed with error message: Could not unmount disk."
Can anyone help me? It's driving me crazy.
Thanks.

This message, and threads like yours got asked daily for over two years, now it is only a couple times a week!!
Is it so hard to follow through? you were to have backup already, clones are best, then erase/format and restore.
Then partition.
Some have been able to use Disk Utility booted from OS X DVD or another drive, and repair the drive.
You have to use Boot Camp Assistant (99.9% anyway) to create and achieve a proper Windows Master Boot Record partition.

When i try to use boot camp assistant to install windows 7 it sais an error has occured any help?

When i try to use boot camp assistant to install windows 7 it sais an error has occured any help?

Boot from another hard drive or DVD and repair with Disk Utility.

The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows.

The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows.

nikasv wrote:
The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows.
That's essentially what Solving Boot Camp partition creation problems says. What is your question?

While at boot camp assistant, Downloading the windows support software stalls

From a long time windows user, I was persuaded to migrate to mac and am quite lost. While using boot camp assistant, downloading the windows support software just stalls at 20%. I tried using alternative drives, USB, DVD and the partitioned HD of imac but still to no avail. What should I do?

No problem. For me, I spent the time downlaoding the drivers for Boot Camp 4.0 (form Lion), un-installed by Boot Camp 3.0 because it wouldn't upgrade, and then learned that Boot Camp 4.0 didn't support my old MacBok Pro. I had to go back and install 3.0, then update to 3.1, 3.2 and finally to 3.3. That took me about an hour and a half... Oh well, at least I already had most of those on disc ot downloaded...

Boot Camp Assistant ejects The Windows intaller disc

Hi to everyone,
iMac:
- Intel-based iMac (late 2008).
OS and Hardware:
- Mac OS X version 10.5.7
- Boot ROM Version: IM81.00C1.B00
- SMC Version (system): 1.30f1
DVD Drive:
- OPTIARC DVD RW AD-5630A
- Firmware Revision: 1AHN
I'm trying to install Windows XP Pro OEM SP3 (version 2002).
I launched Boot Camp Assistant 2.0 and created a 32 GB Bootcamp partition. So far so good, then I'm asked to insert the Windows installer disc. I do what is asked then wait a few seconds and click "Start Installation". After about 20 seconds or so, Boot Camp Assistant ejects the Windows disc and displays this: "The installer disc could not be found." I re-insert the disc but the same thing happens again and again.
This is what I tried before posting here for your help:
I quit Boot Camp Assistant and tried to insert the Windows XP Pro installer disc and it won't mount at all and will eventually be ejected.
I thought the disc might be damaged so I inserted it in a PC and everything seems right with the disc. I can see all files using the PC computer that is 5 years old.
I thought it would be a firmware problem with my iMac so I accessed this page http://support.apple.com/kb/HT1237 and it seems there is no firmware update required for my iMac.
I execute the command Apple>Software Update and there is nothing to update.
Is there someone able to help me?
Thank you in advance.
Kazon

Hi,
I solved the problem myself. This might help others.
Recap:
The Windows XP Pro CD was always ejected by Boot Camp and it wouldn't mount at all when inserted in the CD slot. The CD was however readable on a Windows Machine.
It was not easy to detect but the Windows CD was physically deformed. It wasn't flat. It was a little convex (the outer edge was higher than its center). My iMac wasn't able to read it at all but a PC was able until I decided to test it with a full install on the PC. About half way during the installation, it stopped and an error message was displayed by Windows Setup "Disc Read Error - Disc might be damaged".
I ejected the CD and discovered the deformation. So I carefully placed the outer edge of the CD over a ring and put some weight on its center to try to undo the deformation. I've waited 2 days then retested the CD and it worked at the first attempt. My iMac was happy and so was I. I made a security copy of the CD while it's still readable in case I have to re-install later.
I find Microsoft cheap of putting their Installation CD in a paper sleeve. If the CD have been stored in a CD case this would not have happened.
End of the story.

2007 MBP 10.7.2 - Boot Camp "Can't Install Windows Support Software"

For a few weeks now I've been trying to get Boot Camp going to install Windows 7 on my Macbook Pro. Whenever I go through the assistant, I always get the message "Can't install Windows Support Software becuase it is not currently available from the Software Update server".
The download bar does progress a bit as data is being downloaded, but then stops at about 15% and gives me that error message. Any ideas?

From what I've read the "Download Update" option as you install Lion only works for some MBAirs and it's a hit or miss on all others. (mostly a miss).
You might do a Search on the error you get as there are quite a few discussions on those problems.

If I want to install windows 8 in on my mac through boot camp, can I install windows 8 directly from my pendrive? whats the procedure?

If I want to install windows 8 in on my mac through boot camp, can I install windows 8 directly from my pendrive?
I do not have bootable CD.
whats the procedure?

Hi Rajthumar,
Welcome to the Apple Support Communities!
You can install Windows 7 or Windows 8 ISO using a USB flash drive. Please read over and reference the attached link for information on using Boot Camp to install Windows.
manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_10.8.p df
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Have a great day,
Joe

Boot Camp Assistant wont recognize Windows 7 mounted on SD card

Hello all, first post! So here goes:
I have mounted my Windows 7 to an SD card (the largest media device I have available), but Boot Camp Assistant will not recognize the SD card as a valid way to continue the process. Is this something that simply is undoable or am I missing something here?
If Boot Camp Assistant is not gonna work, can I make a new partition then start my macbook in that partition then install on there with said SD card?
Thanks in advance for the help!
spent
edit: clarity

It is a regular .iso mounted to a SD card, not a USB version of the installer. I did the basic mounting of the .iso onto the SD card via terminal with "sudo dd bs=4m if=imagename.extension of=/dev/disk#". But, i literally just got off the phone with apple care and they helped me this time around without a care program, their answer is: Nope, only USB or Disc copies will be recognized with Boot Camp Assistant
Thank you for caring tho!

Boot Camp Assistant fails on Windows 7 Enterprise software assurance DVD

I've been struggling all morning with this and thought I'd post to help others that might encounter this problem. I'm trying to use Boot Camp Assistant 3.0.1 on an Early 2009 20" iMac to install Windows 7 Enterprise. The disc I was using was a genuine Microsoft DVD sent to us through our Software Assurance program. For the life of me I could not get Boot Camp Assistant to recognize that the disc was inserted into the drive. I didn't find an answer to this problem, but I did find that downloading an ISO of the Windows 7 Enterprise installer from Microsoft's Volume License Service Center site and burning it with Disk Utility to a DVD-R was immediately recognized by Boot Camp Assistant and the install proceeded normally.
The disc that didn't work is labeled:
Microsoft Windows 7 Enterprise
32-bit x86 Upgrade: Pre-existing OS License Required
(Volume License Product Key Required)
DVD
September 2009
Software Assurance
Windows
End Item Part No.
FYC-00127
(barcode)
X15-72936
If you're unable to get Boot Camp Assistant to recognize a DVD that you received from Software Assurance, you might have better luck burning your own DVD-R from an ISO downloaded from Microsoft.

"The disc that didn't work is labeled:
Microsoft Windows 7 Enterprise
32-bit x86 Upgrade: Pre-existing OS License Required
(Volume License Product Key Required)"
It appears you were attempting to install an upgrade version. Did you have a previous version of Windows installed and were you upgrading, or were you trying a new install using an upgrade dvd?

Boot camp does not install windows 7 -

I have created a partition with bootcamp - on my 250GB SSD - and put the slider to 41 Gb; I have the USB with the drivers inserted and the windows 7 disk (dvd?) inserted. When the retort happens, the windows installer starts (from dvd).
First of all I see the partition is 98 Gb - way too much, leaves almost no room for the soft are disk.
Then the installation does not commence, the partition is MS-DOS (FAT) (I checked with disk utility) while the partition should be NTFS (as windows expects). I does not allow me to select this partition.
What should I do?
I have had a working partition before on my HD, now - after I upgraded my iMAC - I wanted to install bootcamp/windows on my SSD.
-> I know that I can delete the partition using Boot Camp Assistant. Then I am clean all over again. I hope.

When creating a partition, Bootcamp assistant wants to also to install windows. That does not work because the error is there that it expects an NTFS file - and I am not going to reformat the partition using windows :-(
Yes. Terribly sorry about that. I forgot that Boot Camp automatically goes into a setup sequence and boots to the Windows installation DVD. I never use Boot Camp when I want to create a Windows partition since I can do the same thing manually the way I want the drive to be.
NTFS isn't a file, it's a format. Like FAT32 or Mac OS Extended (HFS+). Boot Camp will always create a FAT32 partition (called an MS-DOS partition in Disk Utility). Once it boots to the Windows DVD on the restart, your first step is to format the drive you just created in Boot Camp as NTFS. Then continue on with the install.
What I should have written above as step two was to manually create a new partition with Disk Utility and format it as MS-DOS. Then you could have made it any size you wanted and gone right into restoring your Windows 7 backup with WinClone. Again, while not making the least bit of difference the partition was FAT32 rather than NTFS. Restoring your Win 7 backup would have made it NTFS when done.
Since most folks aren't all that handy doing things manually, or just plain don't know how, Apple tries to simplify the process with Boot Camp. But the only part of it you really need is to create the drivers flash drive or disk. After that you can do the whole thing yourself, which is what I do.
Anyway, once you did create the new partition with Boot Camp, you could have stopped the entire process and booted back into OS X. Then restored the WinClone backup to the FAT32 partition. That would saved you the time watching Windows 7 install when you're just going to completely replace that install anyway.

Boot Camp Assistant says Install rather than Partition

I have a second gen MacBook (Intel core 2 duo) I installed Windows XP via bootcamp back when I had OSX Tiger. Today, running OSX Lion, I deleted the windows partition with boot camp assistant, wanting to increase the hard drive size and install Windows 7. I successfully deleted the windows xp partition, and restarted the computer. Now I want to repartition the hard drive and install windows 7. I open boot camp assistant, click continue (only option) check 'install windows 7' and not 'download the latest windows support software from apple' as I already have this on an external hd and click continue. I choose the hard drive size, and boot camp assisnt has the option to 'install' and NOT 'partition'. I dont know why this occurs. anyway, if I click install, boot camp assistant says 'the installer disk could not be found' even though my windows 7 dvd is in the computer.
So, my question boils down to, 'why can't i partition my disk for windows 7?'
Any help would be greatly appreciated! Thanks!

After restoring, I lost my Recovery HD partition. I am currently working to get a new one. Perhaps I will install it AFTER boot camp is finished, which might solve the multiple-partitions error? I could use some advice here.
At this point, bootcamp is giving me a new error which says some files cannot be moved. I am moving this to a new discussion HERE:
http://discussions.apple.com/thread/3298756
Thanks for your help! Please respond to my new thread if you think you can contribute.

Boot Camp Assistant only offers Windows 7

Trying to install Windows XP on my MacBook Pro (10.7.3). When I go through the process the Select Tasks page only offers Install Windows 7. I have my Windows XP (w/SP2) disk in the optical drive, but BCA keeps saying it can't find the installer.
I checked my disk partitions and only see HD Recovery Partition. Isn't that one created when Lion is installed.
What am I doing wrong?
Thanks.

To jtfey
Here is the method to install Windows Xp with using Mac OSX 10.8.1 [mountain lion] with boot camp assistant 5.0 "That doesn't support Windows XP! "
i found out!
You need:
1.Windows 7 original or image of original burned on DVD.
2.Windows XP original or image of original or any WinPe based bootable CD/DVD
3.Patience.
As ussual create partition with Boot Camp to install Windows 7, remember you must have Windows 7 disk in
your CD/DVD drive! When system auto reboots you just need to change Windows 7 with Wndows XP in CD/DVD drive.[Click and Hold Ttrackpad button & also "alt" button on your MacBook Pro before it starts after rebooting until the Windows 7 DVD comes out then insert Windows XP CD and wait until cd icon appears, chose that icon and click enter ] You'll proceed to ussual Windows XP installation process. Thats it!
P.S.
Now, answers to other people in this forum thread !!
q: By the way. what XP programs don't run in Windows 7?
a: Carmageddon + Splat Pack for dos or windows running terrible under Win7 and don't tell me abaut    emulation of dos!
    This games under DosBox (The best dos emulator in my opinion) are laggy. Or if you want to use any      dos programs in FULLSCREEN without any problem, Windows Xp is the key!
Cris said: "Games. The vast majority of people using Boot Camp at this point are gamers. And I find it irritating   to take my limited time helping people **** away theirs......."
My Answer To Cris: jtfey asked help with his problem! noone needs your point of view about gaming e t. c.
If you can help then help without questions like "what for do you need...bla,bla,vast majority of people,bla,bla" !!!

Boot camp assistant not downloading windows support software

I am trying to obtain the latest windows support software from Apple using Boot Camp Assistant 4.0.1 (429) on my iMac. The progress bar goes about 20% across, then stops moving. I've tried several times and I've give it as long as several hours to move further, but it's stuck.I need the updated drivers because my Apple Magic Trackpad has stopped working in Windows 7 under boot camp and I'm hoping that updating the drivers will fix it.
I have the latest version of firmware.

Purchase Snow Leopard install disk.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Info regarding Windows
http://support.apple.com/kb/TS3648

Boot camp will not install windows 7?

I have a 2009 MacBook Pro with Intel Core 2 Duo; OS X 10.9.1, 750 Gb HD, Optical Drive: MatshitaDVD-R
Boot Camp support version 5.1.5640
I can not get Boot Camp to install Windows 7. It will create a partition, but gives me a
“1...2...Select CD-ROM Boot Type“ error and freezes up when attempting to install from Windows install disk in optical drive..
I created a windows7 iso file and installed that on a usb stick, but Boot Camp will not recognize that either.
Is there any way to actually use Boot Camp and Windows on this computer?

Is your Windows 7 cd a full retail version?
You are using the wrong Windows Support software. Look for your computer here: Look for your computer here: http://support.apple.com/kb/HT5634
If your computer came with an optical drive you can not use a usb stick to install Windows.

Boot camp assistance to install windows 8

Similar Messages

Maybe you are looking for