BOOT DRIVE ADVICE for MAC PRO. How Big and Partition Size

So new new Mac Pro (Quad) arrives this week.
I'm doing a drive just for BOOT and another drive (or drives) for data.
The big question is, what size drive should I buy for just BOOT/OS/APPLICATIONS and how much of it should I partition. I want to install everything on the boot drive to be on the outside area of the disc and ignore the inside.... So, do I get a 300GB drive and partition 100GB to use as the boot partition and ignore the rest?
Any advise would be helpful!
Thanks!

If you have Final Cut, X-Plane and such, you'll find even 150GB to be small. You want to have plenty of free space for burning DVD-DL, temp space for programs and files, and so that free space never gets too highly fragmented.
A 200GB partition on a 640GB drive seems to be a good choice and it will still maintain 80MB/sec. Still use the rest as an alternate for your data (put it on a sparse disk image).
10K Raptor 300GB (Amazon, $229) is a nice, fast boot drive if you really need it, though most 640GB drives are more than adequate for most people.
If you plan to install Windows, I'd dedicate a drive just for that purpose and not use your boot drive. Not sure if "BOOT" meant just OS/Apps or more.

Similar Messages

Will the1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1?

Will the 1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1? My details of my Mac Pro is as follows:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
Number Of Processors:          2
Total Number Of Cores:          4
L2 Cache (per processor):          4 MB
Memory:          6 GB
Bus Speed:          1.33 GHz
Boot ROM Version:          MP11.005C.B08
SMC Version (system):          1.7f10
Hardware UUID:          00000000-0000-1000-8000-0017F2059956

It will say "green" and use less power, park its head probably, and while early units had some trouble they have evolved. Variable rpm or slower rpm also. They can be much less expenisve way to add storage.
WD Caviar Green
WD Green 2TB
For the system, 640GB is a nice size. Look for 64MB cache to help insure your drive is the latest models which will also say "6G SATA 3" which is fine.
WD Caviar Black 1TB 6Gb
WD Black Caviar 2TB
larger means higher density platter, I find the 1TB and larger Blacks to run hotter/warmer and companys want drives to be able to run warmer or with less cooling. - but for really cold drives other than SSD I have found all my WD 10K VRs to have the absolute coldest temps.
Just noticed Amazon having better prices than Newegg on 1TB - and WD and Hitachi.
Green for your external backup, for media libraries that are not high volume access, to run cool and less power. Enterprise for system and performance. TimeMachine sometimes makes a poor backup method with some green cases.

Using IMOVIE '08 to import from DV camera to 'BUSLINK' external hard drive( formatted for MAC ) but no success and kept getting this message: The import was canceled. You may not have permission to write to /Volumes/BUSLINK/iMovie Events.localized. Thanx

Using IMOVIE '08 to import from DV camera to 'BUSLINK' external hard drive( formatted for MAC ) but no success and kept getting this message: The import was canceled. You may not have permission to write to /Volumes/BUSLINK/iMovie Events.localized. Thanx in advance!

I finally got a representative that was able to help me, she had me go to Get Info, by right clicking iMovie from the finder, and I had to click on Sharing & Permissions>Everyone>Read & Write

Seeking advice, Boot Camp on a Mac Pro, how to install on internal HDD

Mac Pro, march 09, dual quad core, four internal hard drives.
I named the four HDDs, Drive 1, Drive 2, Drive 3, Drive 4. Drive 1 has the Mac OS. I plan on dedicating the entire Drive 4 to Windows OS and video storage.
Questions:
1. Right now I have Boot Camp installed on Drive 1. I want to remove it and start over because I made the mistake of installing Win7 Pro 32 bit. I bought the 64 bit version for the new install. To remove the existing Boot Camp do I simply use Boot Camp to make Drive 1, one Mac partition again?
2. Drive 4 is a Western Digital Black Caviar 2 TB. Should I make the entire drive one partition?

Hi,
1. The BootCamp Assistant in OSX is indeed the best solution to remove your current Windows installation/partition.
+To delete Windows and the Windows partition:+
1 Start up in Mac OS X.
2 Quit all open applications and log out any other users on your computer.
3 Open Boot Camp Assistant.
4 Select “Create or remove a Windows partition,” and then click Continue.
5 Do one of the following:
If your computer has a single internal disk, click Restore.
If your computer has multiple internal disks, select the disk with Windows
on it, and then select “Restore to a single Mac OS partition” and click
Continue.
Since you are fumbling with the partition structure on your harddisk you should have/make a backup or bootable cone of your OSX before starting, just in case.
2. A good recipe for installing Windows 7 on a dedicated harddisk is to pull out all other harddisks (the first three in your scenario) then boot your MAcPro from the WIndows 7 install DVD and install it on the fourth HD.
After completion of the WIndows installation you can then reinsert the other three HDs.
http://manuals.info.apple.com/enUS/Boot_Camp_Install-Setup10.6.pdf
Regards
Stefan

Upgrade advice for Mac Pro early 2008 needed

I've upgraded to 14 GB ram but my old 2008 Mac Pro (2 x 2.8 GHz Quad-core) now definitely needs replacing. As I want to keep my high end NEC monitor (I work with print design and don't like glossy screens) I wonder if a new Mac Pro is the only realistic option? They're a bit above my budget really but not sure that the top end Mac mini (2.3GHz quad-core Intel Core i7) will be a lot more powerful than what I have now.
I'm working mainly in the Adobe creative suite. Any advice much appreciated.

Just canceled the order. However I finally got to speak to a tech support guy that seemed a bit more knowledgeable. For less money, and (he said) a better way to go, he recommended the Mercury Accelsior_E2
PCI Express SSD. The 120 GB is $299.
Specs here:
http://eshop.macsales.com/shop/SSD/PCIe/OWC/Mercury_Accelsior/Buy_Now
I'll look into the Tempo Pro and compare. Grant mentions that some users have been having trouble getting a PCIe SSD mounted strategy to boot consistently - that concerns me. Grant, can you point me to reports? How have you come by this info?
Hatter - I probably will only use one SSD to get me through the next year or two. Then I'll upgrade. Hatter, the Tempo Pro appears to only be a card adapter, and the SSDs are addtional, correct? The card itself runs $234.
I am looking at the MacRumors review of the OWC and Tempo products too.

Can I move an SSD Boot Drive from a Mac Pro 1,1 to a newer 5,1?

I have a MacPro 1,1 (2 x dual core Xeon, 3.0 GHZ) with 8GB RAM and updated with an ATI 5770 video card, driving a 27" Cinema display; I'm running OSX 10.7.5. There's an SSD boot/OS/App drive, and the data is on a secondary hard drive with backup to the data on an identical third drive. Because it's time to update (I've had this flawless machine for nearly 4 years but need one with 64-bit capability) I've arranged to buy a 2010 Mac Pro 5,1, also with a 5770 card. I don't need the hard drives that are in that "new" one. I would like to just swap the three drives I have in the old one, and put them in the new box. Will I encounter any problems?

There are two types of base Systems:
a) "shipped in the box" with a specific model Mac. These will boot only that model, and software Update does not change that capability.
b) "Full Retail" or "Purchased" (even for $0). These will boot any appropriate Mac, because they contain "Drivers for every appropriate Mac."
Your 10.7 computer shipped with software much older, so I presume you purchased that 10.7, and would therefore expect it to boot any appropriate model Mac.
"A Mac can generally boot software no OLDER than what it originally shipped with."
This table shows the original shipping versions (some of which are custom builds) for these models:
Mac Pro
Date introduced
Original Mac OS X included
(see Tips 1 and 3)
Later Mac OS X included
(see Tip 1)
Mac OS X Build(s)
(see Tip 2)
Mac Pro (Late 2013)
Dec 2013
10.9
10.9.2, 10.9.4
13A4023, 13C64, 13E28
Mac Pro (Mid 2012)
Jun 2012
10.7.3
10.8, 10.8.3
11D2001, 12A269, 12D78
Mac Pro (Mid 2010)
Aug 2010
10.6.4
10.7, 10.7.2, 10.7.3
10F2521, 10F2554, 11A511a, 11C74, 11D2001
Mac Pro with Mac OS X Server (Mid 2010)
Aug 2010
10.6.4
10.7, 10.7.2, 10.7.3 (Server)
10F2522, 11A511a, 11C74, 11D2001 (Server)
Mac Pro (Early 2009)
Mar 2009
10.5.6
10.6
9G3553, 10A432
Mac Pro (Early 2008)
Jan 2008
10.5.1
10.5.2, 10.5.4
9B2117, 9C2031, 9E25
Mac Pro
Aug 2006
10.4.7
10.4.8, 10.4.9, 10.4.10, 10.5
8K1079, 8N1430, 8N1250, 8K1124, 8P4037, 8R3032, 8R3041, 9A581, 9A3129
Mac OS X versions (builds) for computers
This table show that any build after 10.6.4 (custom) should work to boot a Mac Pro 5,1 2010.
CAUTION: the last version shipped on a "Full Retail" DVD was 10.6.3, which will NOT boot that Mac directly.
NB> If staying with 10.7, you should check whether you are running 64-bit kernel. If not, a terminal command and a re-Boot will fix that.

SSD RAID0 as a boot drive on a Mac Pro

I'm buying a Mac Pro early 2008
I'm using Final Cut Pro and After Effects.
Option 1: (5) drives
1. OSX boot drive 80GB SSD (under the DVD drive)
2. 32GB SSD RAID0 (scratch/render drive) bay 1
3. 32GB SSD RAID0 (scratch/render drive) bay 2
4. 1TB RAID1 (backup) bay 3
5. 1TB RAID1 (backup) bay 4
or
Option 2: (4) drives
1. OSX boot drive 64GB SSD RAID0 (OS/scratch/render drive) bay 1
3. OSX boot drive 64GB SSD RAID0 (OS/scratch/render drive) bay 2
4. 1TB RAID1 (backup) bay 3
5. 1TB RAID1 (backup) bay 4
I've always had my OS on a separate drive than my scratch/storage disks. but I'm wondering if it's okay to RAID0 the OS and scratch/render drives together.

Move the mirror RAID to external backup.
Keep the OS and scratch volumes separate; as I said, keep to what you use to do, keep the OS separate. Yes, you should RAID both, but not together. No to option #2.
If you work with 1-2GB files, 16GB RAM is essential (maybe more). I assume you bought 2008 to save a little over 2008 in part to have 8 DIMM slots.
http://store.apple.com/us/browse/home/specialdeals/mac/mac_pro

2nd SuperDrive for Mac Pro

Has anyone found where to buy a 2nd SuperDrive.
My Mac Pro has the Sony DVD DW-D150A, so I guess I would want to stick with that one rather than the Pioneer.
Thx

Hi everyone, just a simple question:
To add the second Optical drive, should you set it
as
Cable or Slave?
Thnx already
Apple ships the OEM optical drive in the New Mac Pro
with the jumpers set to Cable Select as default
(anticipating a second optical drive will be
installed). All you have to do is set the second
optical drive also to Cable Select and you should be
on your way. If that doesn't work, just reset the
already installed OEM ( Sony) drive in the Mac Pro to
Master, and then set your new additional opticals
drives to Slave. If that doesn't work for you, then
switch the drives and reset then both to Cable
Select, and if neccessary to Master/Slave...Good luck!
You can't go wrong with a Master-Slave setting. Just be sure that when you're moving the jumps to really study the graphic on the drive or in the manual. You won't hurt anything if you do it wrong, it just won't work.
The Mac that I use doesn't support cable select, so I'm a bit unfamiliar with how drives work these days in the Mac Pro. Master-Slave is the best option since that will obviously work.

Where can I find internal DVD replacement for Mac Pro 2008?

My optical DVD drive on my Mac Pro (3,1) has been dead for a good long while.
Looking for a cheap replacment. Just saw OWC stopped carrying them. Any leads?

For Mac Pro 3,1 and earlier (2008 and previous) you need an IDE/ATA drive like this one:
http://eshop.macsales.com/shop/superdrive/Mac_Pro_Xeon

Advice on upgrading to SSD for Mac Pro (optimized for AfterEffects & Photoshop)

Hello,
I'm an animator (I use AfterEffects CS5, but will be upgrading to CC soon) and I'm going to start work on a new AE project in a few months for an animated film that will be very demanding (lots of different shots -- meaning multiple projects, all of which will also incorporate large HD stock footage elements as well as multiple layers of art created in Photoshop).
So I'm looking to upgrade my current desktop Mac Pro (a 2010 2x2.66GHz 6-Core Intel Xeon) with SSD drives (and possibly a new graphics card) in order to speed up my system and optimize it for both AfterEffects and Photoshop. (In the past I've created projects using external 7200 RPM hard drives connected via eSATA). I've also decided, for now, not to purchase the new Mac Pro, but rather try and make a smaller investment to speed up my current system.
I'd love any advice that pro users would have that have made similiar upgrades, both in terms of the best equipment (SSD drives and graphics card) and the best way to set up AfterEffects/Photoshop projects using these SSDs.
For example:
1. Should I be purchasing 1 or 2 SSDs, and how should I be using these drives to optimize my system for AfterEffects and Photoshop?
2. Should I install my operating system (I'm on OS 10.8.5 but plan to upgrade to Mavericks when I upgrade to CC) on one separate SSD, and then install my Adobe applications on a 2nd SSD, or can I put both the operating system and applications on a single SSD? And should I be saving my projects on a SSD (if so, which one, if I'm supposed to purchase 2?
3. Should I assign a 2nd SSD as a scratch disk for AfterEffects or Photoshop?
4. I plan on using my current external hard drives (a 12 TB RAID array connected via eSATA) to store the footage and Photoshop elements being used in my AE projects (these files will be multiple GBs, and I can't afford to purchase SSD drives to hold these elements on) and also to store the renders from AfterEffects (which will also be very large files). Is this OK, or will this slow me down and negate whatever speed I've gained from moving to SSDs?
5. In researching how to switch over to SSD, I've considered purchasing 1 or 2 SSD drives. The one I'm currently looking at is called the Murcury Accelsior_E2, a PCI Express SSD sold via OWC. It comes in a few different sizes (120 GBs, 240 GBs, 480 GBs, 960 GBs). Just wondering if this is a good purchase -- the reviews seem to be very positive:
http://eshop.macsales.com/item/OWC/SSDPHWE2R960/
6. I'm also considering upgrading my current graphics card (ATI Radeon HD 5870) to the NVIDIA Quatro 4000 or NVIDIA Quatro 5000, but I'm wondering how much of a speed boost this would give me.
Here's an overview of my current system:
Computer: 2010 Mac Pro with 2x 2.66 GHz 6-Core Intel Xeon
Memory: 64 GB DDR3 ECC
Graphics Card: ATI Radeon HD 5870
Hard Drives (Internal): 2x 2TB Hitachi HD
Hard Drives (External): 12TB OWC Mercury Elite Pro RAID drive array (connected via eSATA)
Apologies in advance for the long message, but I've always recieved great advice from these message boards and I'd appreciate any help!
Thanks,
Dan

Thanks so much for jumping back into the discussion, The hatter! I had some earlier questions from before that I was hoping you could answer:
Currently I own a 12 TB OWC Mercury Elite Pro RAID drive array (connected via eSATA) which I use to save projects, project files, and renders. So (unless I am mistaken) you're recommending that I continue to use this RAID array to save projects, project files, and renders.
(I was looking into purchasing a Mercury Accelsior_E2 for my SSD via PCI -- it has eSATA, so I can continue to connect my RAID array)
Then I would use my new SSD via SATA II for my system, apps, and OS (minus home folder media files, data, documents) and my SSD via PCI for scratch disks for Photoshop/AfterEffects.
Currently I have 2 x 2 TB internal hard drives, which have all my OS + home folder media files.
Can I get more details in terms of the step-by-step instructions when it's time to install/clone? Here's how it looks to me (apologies if I have this out-of-order, and feel free to correct me if I've missed a step or have it wrong -- thank you in advance!):
1. Purchase SSDs (via PCI and internal SATA II) and install them inside my Mac Pro.
(Is there any formatting I need to do at this point to the SSDs once they are all plugged in...?)
2. Install TRIM Enabler
(Once it's installed, what do I do with TRIM Enabler? Is it an app that runs 24/7 in the background, or is it an app that I need to launch on a regular basis and perform commands on the SSDs...? Very confused on what TRIM Enabler does.)
3. Use CCC to clone system from old internal hard drive to new internal SSD drive. When using CCC, deselect media folders in home account before cloning (so I am NOT cloning media folders from old hard drive to new SSD drive).
(What specific media folders should I be deselecting? I'd like to keep my music, movies, iPhoto/Lightroom files, and email archive where they are now -- on the 2 x 2TB internal drives that shipped with my Mac Pro. Is there a link that provides more info on this process? Never used CCC before but I assume it's not too hard to use...?)
4. CCC clones system gets 'cloned' (minus the media folders) to the SSD that is installed via SATA II in empty internal drive bay inside Mac Pro.
5. Repair the SSD with DU after cloning and before using and booting from SSD.
(What is DU? How does it work? Not familiar with DU...?)
6. Reboot computer from system running on SSD.
7. Open Photoshop/AfterEffects (now running from SSD) and assign new scratch disk (the SSDs on PCIe SSD controller).
8. After 100% sure that system + apps that have been cloned is working via SSD, delete ONLY system and apps from old hard drive (but do not delete media files).
(Now that my system is on a separate SSD drive, when I do things like purchase new music from iTunes, will it get downloaded to the old location (my old hard drive with all my media)? In other words, are there steps I have to perform in order to relink my media folders now that they're on a separate drive?
Thanks,
Dan

How do I set up an internal drive in my Mac pro as a mountable network drive

Hi! I basically would like to know how to use one of the internal hard drives in my Mac pro as a mountable network drive to enable me to do full time machine backup and restores for my MacBook pro. Thanks in advance for the help!

If it's just for you, you can access and or all of your Mac Pro drives from your MBP just by logging onto the Mac Pro using the Mac Pro name and password. This is a very bad idea unless you are in a trusted environment but if you're on a home network and you trust yourself, it really works.
I've been using this technique for years on a gigabit LAN in my home. It also works logging on the other or both ways. Just pay attention to things like re-boots and shut-downs.

I have a MS Office for Mac CD, how do I install the software onto my MacBook Pro (Retina Display)?

I have a MS Office for Mac CD, how do I install the software onto my MacBook Pro (Retina Display)? It does not have a CD drive.

If all else fails, try this. i used to do it all the time before. might or might not work with the new office.
if you have access to another computer with a cd/dvd rom, copy the entire contents of the cd on a thumb drive.
insert the thumb drive in your MB and do the install from there.
However, if you have the newer version of MS Office, Bandit's suggestion is much better.

Mac Pro 8 core with boot drive cloned from MacBook Pro

I bought a Mac Pro 8 core and in order to avoid having to reinstall all my stuff, I cloned my OSx (tiger 10.49) partition from my MacBook Pro running vista (installed via bootcamp) to my new MacPro's startup disk. The disk works fine except that the MacPro will not boot to osx unless I use the option key and choose the OSX partition. If i just turn the machine on it doesen't find anything. I think it is looking for windows. What do you think?????
Also, if i restart from the os x partition on my mac pro it stops just before the lound bong sound and seems to be looking for the dvd drive. Any ideas??

Well, I've covered this extensively here:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
Basically the instructions you should follow are:
1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
2. Connect a Firewire cable between your old Mac and your new Intel Mac.
3. Startup your old Mac in Target Disk Mode.
4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
4. Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/com.apple.mail.plist (* This is a very important file which contains all email account settings and general mail preferences.)
/Home/Library/Preferences/ copy any preferences needed for third-party applications
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to another forum user for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Not knowing what you did when you migrated from your PB to the MBP, I can't really comment, but it's quite possible it didn't go as well as you think. Numerous users who migrated from PPC Macs to Intel Macs ended up with an Intel Mac that didn't work properly because Intel coded components had been replaced by PPC coded components.

How can i perform a search on my external hard drive on my mac pro os x 10.9.2 ?

how can i perform a search on my external hard drive on my mac pro os x 10.9.2 ?

Mac OS X 10.9.2 is 12 years newer than 9.2.x. You need to make sure that Spotlight has indexed the external hard drive by adding it and removing it from Apple menu -> System Preferences -> Spotlight -> Privacy. Check the menu for it:
to determine if indexing is still going on, as it will say indexing.
Alternatively, you can use a non-Spotlight tool, such as:
http://apps.tempel.org/FindAnyFile/
http://www.devontechnologies.com/products/freeware/ - EasyFind
http://www.osxbytes.com/ - iFileX (note the MacUpdate link provided on osxbytes page has a Malware advertisement for MacKeeper, do not download).
http://www.barebones.com/ Textwrangler has a Search file for content, which works on any Text file.

How do I overcome error 150:30 with a replacement system hard drive on a Mac Pro?

I have replaced my system hard disk drive on a Mac Pro and used Mac 'Restore' to restore the complete system from a Time Machine backup. Everything else works correctly, except my current Adobe products (InDesign CS4 and Photoshop CS4) both give a licensing error code 150:30 and each suggest contacting Adobe technical support.
Can you help?
Blair Cramond

Thanks for your reply. Is it necessary to uninstal the existing CS4
products before re-installing?
Ned Murphy <mailto:[email protected]>
5 May 2014 13:14
>
How do I overcome error 150:30 with a replacement system hard
drive on a Mac Pro?
created by Ned Murphy <https://forums.adobe.com/people/Ned+Murphy> in
/Downloading, Installing, Setting Up/ - View the full discussion
<https://forums.adobe.com/message/6354088#6354088>

BOOT DRIVE ADVICE for MAC PRO. How Big and Partition Size

Similar Messages

Maybe you are looking for