Bootcamp Trackpad Click is NOT Working

Hi Everyone
I have Macbook Pro (A1278) and installed bootcamp and Windows 7 prfessional (x64).
in windows 7 the Click(Bottom Left Corner  and Right click(Bottom Right Corner) button is not woking.

even i am experiencing the same problem only at the windows section

Similar Messages

  • My trackpad click is not working correctly

    Hello
    My trackpad click not working very well. the click only work when press in the centre area of the trackpad which make it difficult to click so now I enable tap touch to make click. I got used to touch tap but if you want to drag something it is annoying.
    anyway, is my trackpad is damaged or software problems ?
    how can I fix it ? 
    I don't have Apple insurance Can I bring it to the Apple store ? Can I buy AppleCare now ?
    I got the latest MacBook

    If your MacBook was bought less than 12 months ago it's still under the 1 year warranty. You can only buy the AppleCare warranty extension before the original warranty runs out.

  • Trackpad click bar not working correctly after getting a keyboard replacement.

    I just got my whole keyboard replaced two days ago due to a sticking "m" problem on my 2008 macbook pro.  They didn't replace my trackpad, but now, it seems that my trackpad clicker will only respond if I apply a lot of pressure to the middle of the upper edge of the bar.  If I click anywhere else on the bar, the bar is completely unresponsive.  It makes clicking and dragging nearly impossible. I once had this problem when I had a bulging battery, but the battery is fine now.  Could something have happened when they replaced the keyboard? It can't be coincidence...  Is there a home remedy?  I know they will want to replace it if I take it in, and my old maching has been off warranty for a while now.

    Either a misalignment or a cable is not properly connected.
    Since they just "fixed" the keyboard I'd say take it back as they most likely caused this problem.
    If you want to do it yourself, iFixit could be particularly useful:
    http://www.ifixit.com/Device/Mac

  • Trackpad click will not work

    Hi,
    I have a Macbook Pro and the trackpad is working, but will not click on either the bottom left or right.  Anyone ever have this problem?  Any help would be appreciated.  Also, would Apple fix it for free if less than 1 year old?  I would like to see if there is something I can do without having to take it apart before I bring it in to the store.
    Thanks!

    Also, would Apple fix it for free if less than 1 year old?
    Yes.  You are still under warranty.  Call Apple tech support first.
    I would like to see if there is something I can do without having to take it apart before I bring it in to the store.
    Let AppleCare deal w/it.  You should never take your computer apart as long as it is under warranty and/or you have AppleCare.  If you mess up, your warranty will be voided.
    I have a Macbook Pro and the trackpad is working, but will not click on either the bottom left or right.
    Did you check your trackpad settings in System Preferences?  You make no mention of doing so.
    Check out:  http://support.apple.com/kb/TS1248 Intel-based Apple Portables: Troubleshooting unresponsive trackpad issues

  • My right click is not working. the context menu does not come up and i can no longer drag files/folders. I have checked the mouse and track pad in system preferences and the correct boxes are all checked (with a support member). Please can you help

    My right click is not working and producing the context menu or ability to drag files and folders. I just spoke with a phone support person and we checked that all the mouse/trackpad options for right click were correct and checked.
    Please can you help with this.
    It has only just happened in the last few days.
    Many thanks

    You might want to update your profile so that we can see what model iMac you have and what version of OSX you're running.
    For this question, it might help to know if you're dealing with a trackpad, Magic Mouse, or something else?
    (Until your issue's resolved, you can Control-Left Click to get the right click functionality).

  • Installed new trackpad...not working correctly

    Hi,
    I just installed a new trackpad and it is not working correctly.  The tap to click is not working and it takes extra pressure to even move the tracking arrow.  Any ideas?

    I have an Apple Magic Trackpad I purchased November 2013.  Since upgrading to 10.9 (Maverick) my trackpad will just stop.  My current workaround: turn my Magic Mouse back on (I set it aside in favor of the trackpad), and my trackpad comes back to life.  I turn off the mouse, and the trackpad continues ... for now.
    Strange, and I have no other answers for you.

  • OS X Lion secondary click is not working, any help

    Since I`ve downloaded Lion, the secondary click does not work, I can´t even select it on the trackpad window

    More details needed.
    Are you using an Apple mouse or a 3rd party mouse? Can you enable it in System Preferences > Mouse? Can you Control + click and get the menu like you would when you use secondary click?

  • Why is my secondary click is not working on the right?

    why is my secondary click is not working on the right?

    system preferences/Trackpad/point and click
    check and uncheck secondary click or alter method
    Try SMC reset
    http://support.apple.com/kb/HT3964
    Pram Reset
    http://support.apple.com/kb/ht1379

  • Trackpad scroll function not working in any app - tried everything

    Hello.
    This is my 1st time writing in the forums, and although I have read multiple threads on this issue, nothing has yet solved my problem, including: http://support.apple.com/kb/TS1248, & http://support.apple.com/kb/TS1449. SO ANY HELP IS WELCOME! I have a mid-2010 MBP 13" intel-based dual core with Mavericks OSX 10.9.1 installed already a couple of months now. As of last night, my two-finger scroll does not function in any app. It is the ONLY function on my trackpad that does not work. I have tried changing all scroll preferences, restarting the browser (firefox 27.0.1) & computer, as well as opening Preview app 7.0 to see if it affects other apps as well. It does not work even in Finder. I looked in the permissions section of my apps by right-clicking on "get info" & there seems to be a discrepancy between the default users and their permissions. I am wondering if this is perhaps the problem and can be reset somehow to default settings or if there is a terminal command that can reset the trackpad (like the PC function in the device manager of the control panel, diagnose/repair)? I have a screen shot of the different users/permissions that I can send/post you if necessary, but you'll have to explain me how to do this, as this is my 1st post. Thank-you!

    So whoever falls on this issue, I have visited the Apple Genius Bar today & this is what finally solved my problems:
    1. We created a TEST guest account in System Preferences to find out if it was a user-specific related problem, and it was as the 2-finger scroll function was working in the new user account. I was told this means that the problem is due to a setting that was recently added/deleted/changed.
    2. We deleted the new user account.
    3. We deleted the entire user library folder (except the Mail folder), as that is where all preferences are apparently stored.
    4. VOILA! 2-finger scrolling now functions as was intended (only all settings must now be recreated).
    It is tedious, but at least everything functions as normal & nothing needs to be backed up!
    Hope if anyone else has had this problem, they find this post.
    Cheers,
    Leo

  • My left click does not work on my track pad on my macbook pro 13 inch, is there a fix

    my left click does not work on my track pad on my macbook pro 13 inch, is there a fix

    I recommend you to run Apple Hardware Test > http://support.apple.com/kb/ht1509 It's possible that something is damaged, and Apple Hardware Test will help you finding it. Make sure you tick the option to run an extended test, and connect your Mac to the charger.
    If your Mac came with DVDs, you have to insert the Mac OS X DVD to run Apple Hardware Test. As you haven't got the SuperDrive, you will have to buy an external optical drive

  • Right click is not working in Web dynpro explorer

    Hi All,
    I have SAP net weaver developer studio 2.0.9.
    when i right click on web dynpro components, to create a component, the context  menu is not coming, right click is not working.
    though right click works fine in diagram view and outline view.
    Please suggest what might have happened? and how to get back the settings.
    Cheers,
    Srini.

    Hello Srinivas,
    Try closing and opening NWDS. If you still see the same problem, simple solution for this is, Just Change Workspace to new folder.
    Changing workspace - Window -> Workbench -> workspace -> give new path.
    Close nwds and open it again. It should solve the problem.
    Thanks,
    Sridhar

  • Right click problem: I did not know about the Yahoo sidebar issue, I have removed all toolbars from my browser from 'view' menu. There is nothing in my 'extensions' to disable. Right click is not working. What to do?

    Right clicking is not working on any of the websites. I read up that it's a Yahoo sidebar issue. But, in my extentions, Yahoo sidebar is not there. I had removed all toolbars, but from 'view' menu. Now how do I get my right click to work?
    == This happened ==
    Every time Firefox opened
    == I've noticed it on 1 Aug 2010

    This is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
    Unfortunately no one here can access your support history. You must respond to the emails directly.

  • In "Show more Bookmarks" if I right click does not work (I want to open in a new tab)

    This is using Mac Firefox current version. I use lots of tabs and don't have space for all of them so there is a >> at the right end for clicking and displaying the rest of them. If I click and display list and highlight one of them, the right click does not work - I want to open in a new tab not use the existing - there are no menu options displayed on these tabs. The tabs across the top work fine for this

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem.

    The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Control-clicking does not work in Finder

    Ever since installing the 10.4.5 update, control-clicking does not work in Finder. When I try to do it, Finder automatically restarts itself. This happens in any Finder window and on the desktop itself. Whether I am control-clicking an Application icon or trying to 'Get Info' on a file, Finder restarts itself. I repaired permissions and it did not fix the problem.
    Any idea on how to fix this? Thanks a lot!
    David
    Edit: Nevermind. I fixed it by deleting the JIMZip.plugin file in my Contexual Menu folder. I found the answer in another thread. I apologize for searching after I created this thread.

    David,
    Can you identify any corrupted or incompatible files in either your Macintosh HD/Library/Contextual Menu Items folder, or your Macintosh HD/Users/yourhomefolder/Library/Contextual Menu Items folder?
    If so you may be able to uninstall/reinstall the associated application.
    You may also consider temporary manual removal and isolation of the suspect file to verify CM functionality.
    ;~)

Maybe you are looking for