[Bootstrap unable to get a direct/routed: ..... ] problem !!!

The server does not throw any axception (logs are clear, or there are
some minor log entries about JDBC problems or so), sometimes the
server exits, but in most cases it continues running but it does not
answer to any requests (even from the administration console).
Clients trying to access the server throw exceptions shown below.
This server runs on Win2k.
Any ideas?
-- Marek
"Rob Woollen" <[email protected]> wrote in message
news:[email protected]...
Please post questions to a single newsgroup.
What do you mean when you say crashed? Did the process exit? Was there
any error message?
-- Rob
Marek Slesicki wrote:
Hi Folks!
I am permamently (after one hour or two of continuous testing)
getting my WL 6.0 crashed and the client throws exceptions
shown below. Do you have any idea why it behaves this way?
For me it seems it is a bug, but maybe there are some hints
I should know to avoid this problem ???
Any help would be appreciated!
Thanks in advance,
Marek
Bootstrap unable to get a direct: 'Protocol: 't3''connection to:
'0S:127.0.0.1:[7001,-1,-1,-1,-1,-1,-1]' on port: '7001'
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.io.InterruptedIOException: Read timed out
java.io.InterruptedIOException: Read timed out
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at java.net.SocketInputStream.read(SocketInputStream.java:102)
at java.io.DataInputStream.readLine(DataInputStream.java:449)
at weblogic.rjvm.t3.T3JVMConnection.connect(T3JVMConnection.java:99)
at
weblogic.rjvm.t3.T3JVMConnection.createConnection(T3JVMConnection.java:148)
at weblogic.rjvm.Protocol.createConnection(Protocol.java:201)
at
weblogic.rjvm.ConnectionManager.findOrCreateConnection(ConnectionManager.jav
a:1077)
atweblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:365)
atweblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:330)
at
weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:228)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:188)
atweblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:180)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:149)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:207)
at
weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFactoryDelegate.java:232)
at
weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFactoryDelegate.java:174)
at
weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
ory.java:123)
atjavax.naming.spi.NamingManager.getInitialContext(NamingManager.java:668)
atjavax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246)
at javax.naming.InitialContext.init(InitialContext.java:222)
at javax.naming.InitialContext.<init>(InitialContext.java:178)
at vc.test.LoggedUserTestClient2.<init>(LoggedUserTestClient2.java:41)
at vc.test.LoggedUserTestClient2.main(LoggedUserTestClient2.java:2259)
Bootstrap unable to get a routed: 'Protocol: 't3'' connection to:
'0S:127.0.0.1:[7001,-1,-1,-1,-1,-1,-1]' on port: '7001'
java.rmi.ConnectException: No available router to destination
at
weblogic.rjvm.ConnectionManager.findOrCreateRouter(ConnectionManager.java:11
67)
atweblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:378)
atweblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:330)
at
weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:228)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:188)
atweblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:180)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:149)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:207)
at
weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFactoryDelegate.java:232)
at
weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFactoryDelegate.java:174)
at
weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
ory.java:123)
atjavax.naming.spi.NamingManager.getInitialContext(NamingManager.java:668)
atjavax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246)
at javax.naming.InitialContext.init(InitialContext.java:222)
at javax.naming.InitialContext.<init>(InitialContext.java:178)
at vc.test.LoggedUserTestClient2.<init>(LoggedUserTestClient2.java:41)
at vc.test.LoggedUserTestClient2.main(LoggedUserTestClient2.java:2259)--
Coming Soon: Building J2EE Applications & BEA WebLogic Server
by Michael Girdley, Rob Woollen, and Sandra Emerson
http://learnweblogic.com

Similar Messages

I've upgraded the software on my iPad "The New iPad" as they call it to iOS 6 and I'm unable to get spoken directions on the turn by turn navigation. Does anybody know if this feature is available for the iPad? It's Siri compatible

I've upgraded the software on my iPad "The New iPad" as they call it to iOS 6 and I'm unable to get spoken directions on the turn by turn navigation. Does anybody know if this feature is available for the iPad? It's Siri compatible
Also I'm in Australia

Yes, turn by turn directions is available on the new ipad. I've tried it and it does work.
What problem are you having?

ConMan Bootstrap unable to get a t3 connection t

<ConMan> Bootstrap unable to get a t3 connection ..What can be the reason for
the above mentioned error.

Hi,
"localhost/127.0.0.1" is not a valid address! Decided between either
"t3://localhost" or "t3://127.0.0.1".
Gene Chuang
Teach the world. Join Kiko!
http://www.kiko.com/profile/join.jsp?refcode=TAF-gchuang
"Adrian Blakey" <[email protected]> wrote in message
news:[email protected]..
Tue Sep 05 13:23:58 PDT 2000:<I> <ConMan> Bootstrap unable to get a t3
connection to localhost/127.0.0.1
Wl 5.1.0 sp5 Linux JDK1.3
Anyone know what causes this and how to fix it?

Bootstrap unable to get a t3 connectio

Hello there,
I was wondering if somebody can take look at the following problem.
Any ideas?
thanks,
Sergei

Sergei Prutkin wrote:
Hello there,
I was wondering if somebody can take look at the following problem.
Any ideas?
thanks,
SergeiHi Sergei,
You forgot to attach the problem.
Mandy

I recently upgraded my iphone to the latest IOS but my GPS seems to have a problem... I am unable to get directions from one point to another ... how do I solve this problem?

help! I recently upgraded my iphone to the latest IOS but my GPS seems to have a problem... I am unable to get directions from one point to another ... how do I solve this problem?

If using the built-in Maps app, directions are not available everywhere. Read here:
http://www.apple.com/ios/feature-availability/#maps-directions
If that's your problem, download the Google Maps app.

Hi, I was working at home with my iPad, everything was going well. It went out battery and after this I am unable to connect to the wifi at home. Before getting out battery no problem, and now it sees the router signal but it is unable to connect to it.

Hi, I was working at home with my iPad, everything was going well. It went out battery and after this I am unable to connect to the wifi at home. Before getting out battery no problem, and now it sees the router signal but it is unable to connect to it.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I am unable to get a connection with my ipad through my router but I am able to get in when at my friend's house

I am unable to get a connection with my ipad with my wifi router. Will I need to upgrade my router

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT5429 I am not able to get any directions on my maps i am using iphone 4s and updated to ios 6.1.3 and whenever i try to find a route it always says directions could not be found can anyone help in fixing it

I am not able to get any directions on my maps i am using iphone 4s and updated to ios 6.1.3 and whenever i try to find a route it always says directions could not be found can anyone help in fixing it

Maps: Turn-by-Turn Navigation
Argentina Australia Austria Belgium Brunei Bulgaria Canada Croatia Czech Republic Denmark Egypt Estonia Finland France Germany Greece Hong Kong Hungary Ireland Israel Italy Japan Latvia Liechtenstein Lithuania Luxembourg Macau Malaysia Malta Mexico Morocco Netherlands New Zealand Norway Poland Portugal Romania Russia San Marino Singapore Slovakia Slovenia South Africa South Korea Spain Sweden Switzerland Taiwan Thailand Turkey UK Ukraine USA
Back to Top

Ever since I was with my iPad in France, it goes to the French app store instead of to the Netherlands' one. As a consequence, I am unable to download any app. How to get rid of this problem? Iregularly travel from the Netherlands to France.

Ever since I was with my iPad in France, it goes to the French app store instead of to the Netherlands' one. As a consequence, I am unable to download any app. Not in France, because my bank account number is Dutch (it says), not in the Nteherlands because I should buy in the Dutch app stoe.
How to get rid of this problem? I regularly travel from the Netherlands to France.
Thanks in advvance,
Hans

You can find out how to get service for your iPad on this web page:
http://support.apple.com/kb/index?page=servicefaq&geo=Philippines&product=ipad
Regards.

Router problems how can I connect direct

I am continually having router problems from my service provider. How can i connect my printer directly to my computer? Thanks

Hi,
You need a printer which supports this first and then use the following instructions:
http://www8.hp.com/au/en/campaigns/wireless-printing-center/wireless-direct.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I am unable to get dragging guides from rulers when using CS6 InDesign. Is anybody else getting this problem?

I am unable to get dragging guides from rulers when using CS6 InDesign. Is anybody else getting this problem?

Try restoring your InDesign preferences:
Trash, Replace, Reset, or Restore the application Preferences

Phone unable to get Host Routing Tables

Hey,
I've been on with Rogers tech support for sometime today.
My originating issue was wireless wouldn't work and everytime i tried to scan for networks the bb would freeze and auto restart. I did a backup and wiped the device and wireless was working yet again.
But now i'm unable to get data services at all, apparently with rogers you're supposed to get EDGE and not edge. You're also supposed to have 8 entries in the Host Routing Table and i have none.
Rogers has wiped the handheld, reloaded all applications to barebones and still the issue persists.
Whenever i try to do a full restore it errors out at reloading WLAN Profiles and options.
Before all this started and it was wiped trying to view WIFI Options an error popped up "Uncaught Exception: padded byte out of range" now i remembered that from memory so the Uncaught part maybe wrong.
Really don't want to drop another $500 on a phone literally 2 years after i spent $400 for this thing.
Thanks
Ian

I should also add that i tried my dads sim card in my phone and same issue.
Radio Data Activation: Yes
Signal Level: -86dBm
Radio Access: EDGE
Network: Rogers Wireless
IP Address: 10.172.171.13
ICMP Ping Echo: Yes
BlackBerry Registration: No
Connected to BlackBerry: No
BlackBerry PIN-PIN: No
Server Name: GBISXNAC01S08
Email Address: <email address #1>
Connected to <email address #1>: No
Server Name: GBISXNAC01S08
Email address: <email address #2>
Connected to <email address #2>: No
PIN: 24a5d7dd
MSISDN: <my phone number>
Device Type: BlackBerry 8900
Application Version: v4.6.1.94
Platform Version: 4.2.0.69
Thanks
Ian

HT5019 unable to get turn on display after turning on the power button ,no caps lock is turning on too,even a light at unlock button to open display is not going down , mine was a late 2008 mac book pro ( 17 inch ).please help me to solve my problem

unable to get my screen on even after turning on power button .
light at display unlock was not going down ,
no caps lock button turning on .
please help me to rectify my problem apple community

unable to get my screen on even after turning on power button .
light at display unlock was not going down ,
no caps lock button turning on .
please help me to rectify my problem apple community

Problem: Unable to get connection

I have a jsp page that allow user to upload excel file and at the same page retrieve the data from the uploaded excel file.
the problem is when i click the upload button, i got this error:
org.apache.jasper.JasperException: Unable to get connection, DataSource invalid: "java.sql.SQLException: [Microsoft][ODBC Excel Driver] The Microsoft Jet database engine cannot open the file '(unknown)'. It is already opened exclusively by another user, or you need permission to view its data."but after i refresh the page, it display the page that is expected (which display the data retrieve from uploaded excel file)
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>

<sql:setDataSource var="mp"
driver="sun.jdbc.odbc.JdbcOdbcDriver"
url="jdbc:odbc:mp-list" />
<sql:query var="rs" dataSource="${mp}">
    SELECT * FROM [MP$]
</sql:query>
<html>
<body>
      <form action="upload.jsp" enctype="multipart/form-data" method="post">
         <b>File : </b><input type=file size=20 name="fname"/>
         <INPUT TYPE="Submit" NAME="Submit" VALUE="Upload">
      </form>
      <form name="planForm" action="updateDeviceInfo.jsp" method="post" onsubmit="return validate_form(this)">
        <b><font color="#0000CC">Plan ID: </font></b>
        <input name="planId" type="text" size="8" value="${param.planId}" /></p>
        <table>
            <tr>
                <td><b>Device <b></td>
                <td><b>Qty</b></td>
            </tr>
            <c:forEach var="Row" items="${rs.rows}">
            <tr>
                <td><input name="partId" type="text" size="25" value="${Row.PartId}" /></td>
                <td><input name="qty" type="text" size="12" value="${Row.Qty}" /></td>
            </tr>
            </c:forEach>
        </table>
        <input type="reset" name="reset" value="Clear">
        <input type="submit" name="submit" value=" Submit "/>
      </form>
</body>
</html>
<%@ page import="java.util.*,
                 java.io.*,
                             java.sql.*,
                 org.apache.commons.fileupload.*,
                 org.apache.commons.fileupload.servlet.*,
                 org.apache.commons.fileupload.disk.*,
                 org.apache.commons.fileupload.util.*"
%>
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<html>
<body>
<%
boolean isMultipart = ServletFileUpload.isMultipartContent(request);
if(isMultipart)
               String fileName = "";
               DiskFileItemFactory factory = new DiskFileItemFactory();
               ServletFileUpload upload = new ServletFileUpload(factory);
               List items = upload.parseRequest(request);
               Iterator iter = items.iterator();
               String name = "";
               String value = "";
               InputStream stream = null;
               //check any field to pass in
       while (iter.hasNext())
                        FileItem item = (FileItem) iter.next();
                     name = item.getFieldName();//field name
                                 value = item.getString();//field value
                     if (!item.isFormField()) {
                     name = item.getName();
                     if(name != null ){
                                                //Upload file --start
                                                fileName = new File(item.getName()).getName();
                                                //Get upload diectory from xml
                                                String uploadDirectoty="C://Program Files//Apache Software Foundation//Tomcat 5.5//webapps//QFN_Planning//uploadFiles//";
                                                File file = new File(uploadDirectoty + fileName);
                                                File dir = new File(uploadDirectoty);
                                                if (!dir.exists())
                                                     new File(uploadDirectoty).mkdirs();
                                                FileOutputStream fos = new FileOutputStream(file);
                                                stream = item.getInputStream();
                                                int c;
                                                while(( c = stream.read()) != -1 )
                                                     fos.write( c );
                                                stream.close();
%>
<c:redirect url="planForm.jsp"/>Above is my coding..
Please point out the problem and suggest solution..
Thanks and regards
cavern

If you have the file open via some other application such as Microsoft Excel when you run your java code, your java code will fail because Microsoft Excel has exclusive access to the file. Close Microsoft Excel and run your code again.
If you still have problems, right click on the file icon in WindowsXP, select properties, and make sure the 'read only' checkbox isn't checked. If you're running in linux/unix, you will have to check the file permissions (read/write rights).

HT4061 How do I unlock my iPad? Unable to get serial number since I can't open iPad to get serial number to get help fixing problem.

How do I unlock my iPad? Unable to get serial number since I can't open iPad to get serial number to get help fixing problem.

What do you need the serial number for to unlock the iPad? If the iPad is locked because you forgot the Passcode, you have to restore the device.
What are you trying to unlock?
Your serial number is written on the back of the iPad and on the box that the iPad came in.

[Bootstrap unable to get a direct/routed: ..... ] problem !!!

Similar Messages

Maybe you are looking for