Bought an Iomega external hard drive...cannot get the partition option to appear so that I can reformat
Just pruchased a new Iomega external drive. When following the directions....applications, utilities, disk utilities....the option to partition is not there. What do I do?
See this:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Cick on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Similar Messages
-
I cannot drag my Itunes folder to my external hard drive, despite following the unhelpful help exactly. I get a "no way" sign Circle with a line though it. I have lost a fortune in purchased goods (audio books) because I cant do it. Itunes have said they cant reimburse me and they dont have those books anymore, so cannot redownload them for me. Please remind me NEVER to buy apple products again.
I am scared I am going to lose more money seeing I cant BACK ANYTHING UP.If you used the hard drive with another Mac then it is likely Mac formatted. It was because you posted in the iTunes for Windows forum (kind of the equivalent to taking a VW to a Ford dealership for service) I thought you might be using a Windows formatted drive.
Thumb drives are not universal. There isn't a "universal" drive format. Some work partly with both systems but are not fully compatible.
Click once on the hard drive icon on the desktop. Fo to File then Get Info. It will say the drive format.
Frankly I have never had your problem with a drive so I can't help too much except in general experience. The prohibitory sign is pretty universal and for some reason you are not allowed to copy to that drive.
I think if you had a Windows computer you'd be unhappy with it too and probably be posting on a forum that your machine was virus ridden and crashing and you didn't know anything about registries... To be honest, I was doing a presentation on a friend's Windows computer and wanted to get it to display a simple image file. There was no way we could get the .jpg image file to open with anything but Windows Explorer which is a web browser! I mean, that's really bad, and of course he was so used to using it without knowing anything about computers that he could not help me. I did my presentation in front of 30 people using Explorer. -
Hi, do you know how I can migrate my iphoto and itunes libraries from my over-filled laptop to an external hard drive then point the programs to read from that location instead? I'm trying to make some space available on this old computer
To move iTunes...
http://support.apple.com/kb/HT1449?viewlocale=en_US
...and iPhoto.....
http://support.apple.com/kb/HT1229 -
Upgrading MacBook Pro Hard Drive - cannot get Bootcamp partition to work
Hello,
The other day, I decided to replace my 320 GB hard drive with a 1 TB hard drive/SSD hybrid. I did a little bit of research about cloning the drive before that, and it seemed pretty straight forward to clone the OS X partition, but I wasn't really sure about cloning my Windows partition. Originally, my 320 GB hard drive had 2 partitions: 220 GB for OS X Mavericks, and 100 GB for Windows 8.1.
I bought the new drive with an external enclosure and plugged it in. The first thing I did was open Disk Utility and partitioned the new hard drive (750 GB HFS+, 250 GB NTFS). I figured I would need to partition it first and clone each partition separately. I used Carbon Copy Cloner to clone the OS X partition, and it worked with no problem (I immediately could restart my computer and boot with the partition on the new drive, while it was still plugged in by USB).
Next, I tried using CCC to clone the Windows partition the same way (I realize now that CCC cannot do this). 7 hours later, the cloning was complete, but there was an error that a couple files couldn't be copied. I tried copying them manually but it didn't work. I wasn't sure if the Windows partition would work, so to find out, I switched the hard drives and put the old 320 GB one in the external enclosure. I booted my computer and it booted the new OS X partition with no problem. It also mounted the Windows partition that I cloned with CCC, and I can access all of the files in it. However, when I restarted and held down "option", it would not let me boot the Windows partition.
After some googling, I realized CCC is not able to clone a bootcamp partition and make it bootable, so I opened disk utility and deleted the Windows partition (using the minus button), then recreated it (using the plus button). I downloaded Winclone (paid $30), which supposedly can clone a bootcamp partition. I opened Winclone and it seemed pretty simple: you just choose the source partition on the left, and the target on the right. I plugged in the USB enclosure with my old hard drive, and in the Winclone menu the original Windows partition popped up. I chose that as my source, and chose to copy it to the new NTFS partition on the new drive that I created. I left it on overnight, and when I woke up it said it was completed.
I now had two drives mounted: my NTFS partition that I created, and a new one that said "EFI". I have no idea what EFI is. My NTFS partition looks like it has all of the files from my original Windows partition on it; however, when I restart it does not allow me to boot with it, although I now have the option to boot EFI. When I select EFI, I am given the Windows 8.1 start up screen (with the blue Windows logo), but then an error message pops up saying something like there is an issue and it needs to restart (it restarted before I could read the whole thing).
When I boot in OS X, I only have the NTFS partition (with all my Windows files) mounted, and no EFI. When I restart, I can still boot EFI, but I always get the same message and then it restarts.
Is there any way I can fix my Windows partition so that it works the same way it did on my old drive? What is EFI? Can I delete it? How can I make the NTFS partition, which seems to have all of my files, bootable? I only want 2 partitions: one for OS X, and one for Windows. Also, can I do all of this without having to reinstall either of the operating systems?
ThanksHmm, that's a good question!
I headed over to the twocanoes website (the folks that make Winclone) and their guide mentions something about running Sysprep before you create the Windows image. If you skipped that step, that may be why you're having issues
http://www.twocanoes.com/support/winclone/migrating-a-bootcamp-partition-with-wi nclone/
Step 24 in that guide also mentions copying a Boot file - were you able to/did you do that?
You may have better luck over in the Bootcamp forum, which is here.
~Lyssa -
Upgrading MacBook Pro Hard Drive - cannot get Windows partition to work
Hello,
The other day, I decided to replace my 320 GB hard drive with a 1 TB hard drive/SSD hybrid. I did a little bit of research about cloning the drive before that, and it seemed pretty straight forward to clone the OS X partition, but I wasn't really sure about cloning my Windows partition. Originally, my 320 GB hard drive had 2 partitions: 220 GB for OS X Mavericks, and 100 GB for Windows 8.1.
I bought the new drive with an external enclosure and plugged it in. The first thing I did was open Disk Utility and partitioned the new hard drive (750 GB HFS+, 250 GB NTFS). I figured I would need to partition it first and clone each partition separately. I used Carbon Copy Cloner to clone the OS X partition, and it worked with no problem (I immediately could restart my computer and boot with the partition on the new drive, while it was still plugged in by USB).
Next, I tried using CCC to clone the Windows partition the same way (I realize now that CCC cannot do this). 7 hours later, the cloning was complete, but there was an error that a couple files couldn't be copied. I tried copying them manually but it didn't work. I wasn't sure if the Windows partition would work, so to find out, I switched the hard drives and put the old 320 GB one in the external enclosure. I booted my computer and it booted the new OS X partition with no problem. It also mounted the Windows partition that I cloned with CCC, and I can access all of the files in it. However, when I restarted and held down "option", it would not let me boot the Windows partition.
After some googling, I realized CCC is not able to clone a bootcamp partition and make it bootable, so I opened disk utility and deleted the Windows partition (using the minus button), then recreated it (using the plus button). I downloaded Winclone (paid $30), which supposedly can clone a bootcamp partition. I opened Winclone and it seemed pretty simple: you just choose the source partition on the left, and the target on the right. I plugged in the USB enclosure with my old hard drive, and in the Winclone menu the original Windows partition popped up. I chose that as my source, and chose to copy it to the new NTFS partition on the new drive that I created. I left it on overnight, and when I woke up it said it was completed.
I now had two drives mounted: my NTFS partition that I created, and a new one that said "EFI". I have no idea what EFI is. My NTFS partition looks like it has all of the files from my original Windows partition on it; however, when I restart it does not allow me to boot with it, although I now have the option to boot EFI. When I select EFI, I am given the Windows 8.1 start up screen (with the blue Windows logo), but then an error message pops up saying something like there is an issue and it needs to restart (it restarted before I could read the whole thing).
When I boot in OS X, I only have the NTFS partition (with all my Windows files) mounted, and no EFI. When I restart, I can still boot EFI, but I always get the same message and then it restarts.
Is there any way I can fix my Windows partition so that it works the same way it did on my old drive? What is EFI? Should I delete it? How can I make the NTFS partition, which seems to have all of my files, bootable? I only want 2 partitions: one for OS X, and one for Windows. Also, can I do all of this without having to reinstall either of the operating systems?
ThanksHmm, that's a good question!
I headed over to the twocanoes website (the folks that make Winclone) and their guide mentions something about running Sysprep before you create the Windows image. If you skipped that step, that may be why you're having issues
http://www.twocanoes.com/support/winclone/migrating-a-bootcamp-partition-with-wi nclone/
Step 24 in that guide also mentions copying a Boot file - were you able to/did you do that?
You may have better luck over in the Bootcamp forum, which is here.
~Lyssa -
Hello,
I'm moving my library to an external hard drive.
I've made sure to use the 'Keep iTunes Media Folder Organized' option when pointing to the new library location.
I select 'File'->'Library'->'Organize Library', I select to 'Consolidate Files', click 'OK' and get ther error message "Copying files failed. The disk could not be read from or written to".
I've read elsewhere that there may be a corrupted file that I need to sequester somehow and perhaps add it back however I'm not certain how I can locate that file because the status window doesn't indicate which file it's attempting to transfer when the error appears.
Any tips?
Thank you,
Greg H
iTunes 10.6.3OK I figured it out!
It was a dodgy file....I sorted the file folders by date, and as it turned out within the "compilations" folder there was a CD where only about half the tracks seemed to have been copied over. Could not have identified this simply from the time indicated on the finder folder sort, because there were several CDs copied over in the that same minute.
I went back to the original itunes folder, deleted all the files from that CD in itunes, then also deleted all those files from the original disk and the target disk.
Tried the "consolidate library" again, and it completed nicely. 200megs of music and videos.
Very happy to solve this problem after 3 weeks. -
For some reason, my computer will not let me drop my pictures from the Iphoto location to my external hard drive.
The drive is formatted for Windows. To write to it from a Mac, you will either have to reformat it or install third-party software to enable writing to an NTFS volume (not recommended.)
-
Iomega external hard drive either 'not found' by Time Machine or is now in 'read only' format
I don't know what's going on with my iomega external hard drive. Sometimes the HD is recognised by the computer; other times it isn't; if it isn't I can restore to an earlier back up via Time Machine app; but it's like the disk isn't writable.
Ten days ago, I had trouble backing up my iMac using Time Machine. After turning it off and restarting my external hard drive, it backed up successfully.
However, today I am trying to back up my files, and TM tells me it can't find the external hard drive. Nothing has changed -- I have been out of town this past week -- but somehow my HD now seems to be in 'read only' format. It does turn on, and I could restore my computer to an earlier back up.
"Mac OS X can't repair the disk. You can still open or copy files on the disk, but you can't save changes to files on the disk. Back up the disk and reformat it as soon as you can."
Annoyingly, despite my HD not showing in Finder or on my Desktop (as it usually does), when I simply turn it off I get that warning message "The disk was not ejected properly".
Have tried verifying and repairing using Disk Utility, to no avail.
Am prompted to reformat but I don't have a good understanding of what this means and how to do it. I'm guessing this would wipe the disk clean and I'd have to create the initial back up image all over again -- I'm reluctant to do this since this HD is my only back up and if it all goes tits up I'll be up that famous creek without a paddle.
Thoughts, suggestions, input all welcome and deeply appreciated -- thank you!fzgy wrote:
"Mac OS X can't repair the disk. You can still open or copy files on the disk, but you can't save changes to files on the disk. Back up the disk and reformat it as soon as you can."
It's possible a heavy-duty 3rd-party disk repair app can fix it, but they're expensive (DiskWarrior is about $100), and there's no guarantee it can do it.
Am prompted to reformat but I don't have a good understanding of what this means and how to do it.
That will erase it. See Time Machine - Frequently Asked Question #5.
It sounds very much like the disk is beginning to fail, although it's possible there's a bad port, cable, connection or power supply (if it has its own).
I'd suggest getting a new one, and using it for your Time Machine backups; once you have a good backup there, reformat the old one (and select Security Options to write zeros to the whole drive -- if that fails, you know the drive is toast). Use it for secondary backups, per FAQ #27. If it has failed, get a second new one for secondary backups. -
I can't burn CDs or DVDs. I get a "medium write error." Bought a new external CD drive, and get the same message.
What are you trying to achieve? Are you trying to burn to disk via the iPhoto Share ➙ Burn menu? That produces a mini library on the disk that can be used only by a Mac running iPhoto.
If you want to burn just some image files to a data CD/DVD disk then follow Larry's recommended workflow.
What disk type and manufacturer are your using? What system and iPhoto version are you running? Have you run the OS X Mountain Lion: Use Apple Hardware Test? When did the burning proiblem begin? If you can't burn a disk from the Finder then it's a hardware or system problem and not an iPhoto one.
OT -
Bought new Mac Retina; how do I get CS 5 on it; bought external hard drive but get error msg 15?
Bought new Mac Retina; how do I get CS 5 on it; bought external hard drive but get error msg 15?
Hi there,
I was able to format the Toshiba hard drive on my old Mac and copy the Adobe Suite onto it. I followed instructions to format the hard drive to the Retina Mac through Disk Utility, but I still can see the external drive on the new Mac.
Any suggestions…?
Susan Babin -
I have just upgraded from a Macbook to a Macbook Air. I have been using a iomega external hard drive for Time Machine, which use a Firewire. However, Macbook Air's do not have a Firewire port and i cannot find an adaptor anywhere. Can anyone help?? Thanks
There has never been a reliable firewire ---> USB adapter suitable for external high speed storage. This was a major issue when the MacBooks lost the firewire port a number of years ago (Apple subsequently brought it back).
The only high speed port on the Air is the ThunderBolt port. There are external ThunderBolt drive options out there, but they're somewhat more expensive than traditional USB/FireWire options. -
How can I make my Mac mini recognise again iomega external hard drive, if it has stopped to do so?
many thanks.[USB and FireWire Quick Assist|http://support.apple.com/kb/HT1151]
[Common fixes for USB device issues (unrecognized, etc.)|http://www.macfixit.com/article.php?story=20070824012114701]
[What to do if your computer won't recognize a FireWire or USB device|http://support.apple.com/kb/HT1317] -
Problem with saving from white Macbook to Iomega external hard drive
I'm sorry if this question has been asked before but i cannot find any thread, so i apologise in advance!
I recently have bought a white macbook, but i have a Iomega external hard drive 250GB (which is not full and nowhere near full)I able to move songs and photos over to iTunes and save on my iPhone okay with no problem. The problem arises when i want to do it the other way, I basically want to save documents, songs and pictures on my macbook over to the external hard drive.
The icon for the external hard drive appears and everything works. I was suggested to use iTunes > preference > advanced and change the location to my hard drive. I have tried this and all it does it make an additional copy on iTunes not on the hard drive.
I would be grateful if someone could please help me as i do not have a clue!
Thanks
GemmaMy guess is that the external drive is formatted for windows (NTFS) and for the Mac it would be read only. You can't write to the disk unless you use a third party application like [NTFS-3G|http://www.macupdate.com/info.php/id/24481/ntfs-3g].
If you're only going to use the drive with your Mac, I suggest reformmating it for Mac (Mac Extended (Journaled)) using Disk Utility. This process will erase the drive so if there's any more stuff that you need, reclaim that first. -
Recover files from iomega external hard drive to mac 10.6.2
I'm very frustrated. I have 50gigs of documents and photos sitting in my iOmega external hard drive, some of which I need to print for my mother's funeral on Saturday.
I am computer savvy but not a tech, so I'm having difficulty understanding how to get my Mac to open these files in my iPhoto program, or PS Elements 9.
I don't have any money, so I can't purchase any software at the moment, but i DESPARATELY need to open these photo files to print them off tomorrow.
Please can someone help me find a quick, easy, and free solution.
These files were backed up from my PC before I bought my first Mac in Dec 2010.iPhoto/File/Import to Library should bring the desired photos into iPhoto.
-
I bought a new external hard drive for backups, but time machine won't do a full back up.
I think it is remembering backing up onto previous external hard drives, which I don't own anymore. How do I do a new full backup?
When I bought the new (used) iMac, I also bought an external hard drive for backups. It worked fine, but my husband stole it.
Then I bought a new external hard drive (Seagate) and it worked fine for three weeks, then died.
So I just got a new external hard drive, which was put together from an internal hard drive and a hard drive enclosure.
Time machine did the first backup today, and it should have taken 9 hours like it did on the previous first time full back up. Instead, it took 30 minutes. That can't be right. I want to start over and do a full backup to make sure everything gets onto my new external hard drive, but I can't figure out how to do that. Please help.Triple-click anywhere in the line below to select it:
tmutil compare -E
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.
Maybe you are looking for
-
Modify Application: Error Message:: Object Variable or With Block variable
Hi Experts, We just installed 5.1 on our server and once the application is installed. When I try to modify the aplication I get this error at the end This is step what the modify app does: Check environment information Drop Fact table index. Modify
-
Dear all, I'm trying to get the String from unicode, previously i'm converting the String to Unicode like below, String s = "\\u"+Integer.toHexString(s.charAt(0)); Which is giving me the same what i appended above even after Conversion using UTF-8. I
-
Hello, I need to update the field SERNR in the table EKET. I didn't found a suitable FM for this process. I found some FMs like BAPI_PO_CHANGE or BAPI_SCHEDULE_MAINTAIN. But there is no SERNR included. Thx for helping
-
Information on E-Signature in SAP
Hi, I haven't seen any content on e-signatures used in SAP Pharmaceuticals. It would be great if we can find it here in SDN. Cheers! Anand
-
Acrobat x Pro tiral version won't download. When I hit the download button nothing happens.