Bounce file exceeds maximum size. How to change CAF

I'm new at editing recordings. I only record my speaking engagements. They are rarely under one hour. When I tried to "share" to my iTunes, I got an error message that says
"The bounce file exceeds the maximum file size. Please change the format to CAF, or decrease the bounce range."
I have NO idea what that means, and NO idea where I would change the format. Could someone please enlighten me?
I really appreciate your volunteering your time to share this information!
ALSO: If I wanted to divide a recording into parts, how would one go about doing this? (maybe making 20 minute sections - and that would decrease the size of the file).
MANY thanks,
Lianda 

When you are sharing to iTunes, try a different quality setting, not AIFF.  A lower quality setting will give a smaller file size.
To export only a part of the song, enable "Export Cycle Region only" and then use the Cycle region (the yellow bar in the ruler), to mark the part of the song you want to share to iTunes.

Similar Messages

  • SDO_ORDINATES.X.Field in data file exceeds maximum length

    Hi All,
    While loading data in .SHP file into oracle spatial through SHP2SDO tool following error message appears:
    Error message:
    Record 54284: Rejected - Error on table GEO_PARCEL_CENTROID, column CENTROID_GEOM.SDO_ORDINATES.X.
    Field in data file exceeds maximum length.
    I read some where this is due to the SQL * Loader takes default column value to 255 characters. But there is confusion to me how to change the column size in control file because it is object data type. I am not sure this is correct or not.
    The control file show as below:
    LOAD DATA
    INFILE geo_parcel_centroid.dat
    TRUNCATE
    CONTINUEIF NEXT(1:1) = '#'
    INTO TABLE GEO_PARCEL_CENTROID
    FIELDS TERMINATED BY '|'
    TRAILING NULLCOLS (
    CENTROID_ID INTEGER EXTERNAL,
    APN_NUMBER      NULLIF APN_NUMBER = BLANKS,
    PROPERTY_A      NULLIF PROPERTY_A = BLANKS,
    PROPERTY_C      NULLIF PROPERTY_C = BLANKS,
    OWNER_NAME      NULLIF OWNER_NAME = BLANKS,
    THOMAS_GRI      NULLIF THOMAS_GRI = BLANKS,
    MAIL_ADDRE      NULLIF MAIL_ADDRE = BLANKS,
    MAIL_CITY_      NULLIF MAIL_CITY_ = BLANKS,
    MSLINK,
    MAPID,
    GMRotation,
    CENTROID_GEOM COLUMN OBJECT
    SDO_GTYPE INTEGER EXTERNAL,
    SDO_ELEM_INFO VARRAY TERMINATED BY '|/'
    (X FLOAT EXTERNAL),
    SDO_ORDINATES VARRAY TERMINATED BY '|/'
    (X FLOAT EXTERNAL)
    Any help on this would appreciate.
    Thanks,
    [email protected]

    Hi,
    Looks like you have a problem with record 61 in your data file. Can you please post it in reply.
    Regards
    Ivan

  • On load, getting error:  Field in data file exceeds maximum length

    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    PL/SQL Release 11.2.0.3.0 - Production
    CORE    11.2.0.3.0    Production
    TNS for Solaris: Version 11.2.0.3.0 - Production
    NLSRTL Version 11.2.0.3.0 - Production
    I'm trying to load a table, small in size (110 rows, 6 columns).  One of the columns, called NOTES is erroring when I run the load.  It is saying that the column size exceeds max limit.  As you can see here, the table column is set to 4000 Bytes)
    CREATE TABLE NRIS.NRN_REPORT_NOTES
      NOTES_CN      VARCHAR2(40 BYTE)               DEFAULT sys_guid()            NOT NULL,
      REPORT_GROUP  VARCHAR2(100 BYTE)              NOT NULL,
      AREACODE      VARCHAR2(50 BYTE)               NOT NULL,
      ROUND         NUMBER(3)                       NOT NULL,
      NOTES         VARCHAR2(4000 BYTE),
      LAST_UPDATE   TIMESTAMP(6) WITH TIME ZONE     DEFAULT systimestamp          NOT NULL
    TABLESPACE USERS
    RESULT_CACHE (MODE DEFAULT)
    PCTUSED    0
    PCTFREE    10
    INITRANS   1
    MAXTRANS   255
    STORAGE    (
                INITIAL          80K
                NEXT             1M
                MINEXTENTS       1
                MAXEXTENTS       UNLIMITED
                PCTINCREASE      0
                BUFFER_POOL      DEFAULT
                FLASH_CACHE      DEFAULT
                CELL_FLASH_CACHE DEFAULT
    LOGGING
    NOCOMPRESS
    NOCACHE
    NOPARALLEL
    MONITORING;
    I did a little investigating, and it doesn't add up.
    when i run
    select max(lengthb(notes)) from NRIS.NRN_REPORT_NOTES
    I get a return of
    643
    That tells me that the largest size instance of that column is only 643 bytes.  But EVERY insert is failing.
    Here is the loader file header, and first couple of inserts:
    LOAD DATA
    INFILE *
    BADFILE './NRIS.NRN_REPORT_NOTES.BAD'
    DISCARDFILE './NRIS.NRN_REPORT_NOTES.DSC'
    APPEND INTO TABLE NRIS.NRN_REPORT_NOTES
    Fields terminated by ";" Optionally enclosed by '|'
      NOTES_CN,
      REPORT_GROUP,
      AREACODE,
      ROUND NULLIF (ROUND="NULL"),
      NOTES,
      LAST_UPDATE TIMESTAMP WITH TIME ZONE "MM/DD/YYYY HH24:MI:SS.FF9 TZR" NULLIF (LAST_UPDATE="NULL")
    BEGINDATA
    |E2ACF256F01F46A7E0440003BA0F14C2|;|DEMOGRAPHICS|;|A01003|;3;|Demographic results show that 46 percent of visits are made by females.  Among racial and ethnic minorities, the most commonly encountered are Native American (4%) and Hispanic / Latino (2%).  The age distribution shows that the Bitterroot has a relatively small proportion of children under age 16 (14%) in the visiting population.  People over the age of 60 account for about 22% of visits.   Most of the visitation is from the local area.  More than 85% of visits come from people who live within 50 miles.|;07/29/2013 16:09:27.000000000 -06:00
    |E2ACF256F02046A7E0440003BA0F14C2|;|VISIT DESCRIPTION|;|A01003|;3;|Most visits to the Bitterroot are fairly short.  Over half of the visits last less than 3 hours.  The median length of visit to overnight sites is about 43 hours, or about 2 days.  The average Wilderness visit lasts only about 6 hours, although more than half of those visits are shorter than 3 hours long.   Most visits come from people who are fairly frequent visitors.  Over thirty percent are made by people who visit between 40 and 100 times per year.  Another 8 percent of visits are from people who report visiting more than 100 times per year.|;07/29/2013 16:09:27.000000000 -06:00
    |E2ACF256F02146A7E0440003BA0F14C2|;|ACTIVITIES|;|A01003|;3;|The most frequently reported primary activity is hiking/walking (42%), followed by downhill skiing (12%), and hunting (8%).  Over half of the visits report participating in relaxing and viewing scenery.|;07/29/2013 16:09:27.000000000 -06:00
    Here is the full beginning of the loader log, ending after the first row return.  (They ALL say the same error)
    SQL*Loader: Release 10.2.0.4.0 - Production on Thu Aug 22 12:09:07 2013
    Copyright (c) 1982, 2007, Oracle.  All rights reserved.
    Control File:   NRIS.NRN_REPORT_NOTES.ctl
    Data File:      NRIS.NRN_REPORT_NOTES.ctl
      Bad File:     ./NRIS.NRN_REPORT_NOTES.BAD
      Discard File: ./NRIS.NRN_REPORT_NOTES.DSC
    (Allow all discards)
    Number to load: ALL
    Number to skip: 0
    Errors allowed: 50
    Bind array:     64 rows, maximum of 256000 bytes
    Continuation:    none specified
    Path used:      Conventional
    Table NRIS.NRN_REPORT_NOTES, loaded from every logical record.
    Insert option in effect for this table: APPEND
       Column Name                  Position   Len  Term Encl Datatype
    NOTES_CN                            FIRST     *   ;  O(|) CHARACTER
    REPORT_GROUP                         NEXT     *   ;  O(|) CHARACTER
    AREACODE                             NEXT     *   ;  O(|) CHARACTER
    ROUND                                NEXT     *   ;  O(|) CHARACTER
        NULL if ROUND = 0X4e554c4c(character 'NULL')
    NOTES                                NEXT     *   ;  O(|) CHARACTER
    LAST_UPDATE                          NEXT     *   ;  O(|) DATETIME MM/DD/YYYY HH24:MI:SS.FF9 TZR
        NULL if LAST_UPDATE = 0X4e554c4c(character 'NULL')
    Record 1: Rejected - Error on table NRIS.NRN_REPORT_NOTES, column NOTES.
    Field in data file exceeds maximum length...
    I am not seeing why this would be failing.

    HI,
    the problem is delimited data defaults to char(255)..... Very helpful I know.....
    what you need to two is tell sqlldr hat the data is longer than this.
    so change notes to notes char(4000) in you control file and it should work.
    cheers,
    harry

  • Loader- Field in data file exceeds maximum length

    Hi,
    I am getting error while loading the data: However data size of this columns is less thatn 4000 and i defined column as : OBJ_ADDN_INFO CLOB
    Please help
    ==================
    Record 1: Rejected - Error on table APPS.CG_COMPARATIVE_MATRIX_TAB, column OBJ_ADDN_INFO.
    Field in data file exceeds maximum length
    LOAD DATA
    infile *
    REPLACE
    INTO TABLE APPS.CG_COMPARATIVE_MATRIX_TAB
    FIELDS TERMINATED BY ","
    OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
    ( APPS_VERSION,
    MODULE_SHORT_NAME,
    CATEGORY,
    MODULE,
    OBJECT_NAME,
    OBJECT_TYPE,
    OBJECT_STATUS,
    FUNCTION_NAME,
    OBJ_ADDN_INFO
    begindata
    "12",DBI,Oracle Daily Business Intelligence,DBI for Depot Repair,ISC_DEPOT_RO_INIT,PROGRAM,Changed,"Initial Load - Update Depot Repair Order Base Summary","The ISC_DR_REPAIR_ORDERS_F fact has a new column FLOW_SATUS_ID. The FLOW_STATUS_ID contains a user-defined Status for a Repair Order. The STATUS Column will continue to store the Status, now called State of the Repair Order i.e. O , C , D , H . The Initial Load incorporates the additional column FLOW_STATUS_ID. The Incremental Load s merge statement is modified to collect or update the additional column FLOW_STATUS_ID also. ","DBI for Depot Repair"
    "12",DBI,Oracle Daily Business Intelligence,DBI for Depot Repair,ISC_DEPOT_RO_INCR,PROGRAM,Changed,"Update Depot Repair Orders Base Summary","The ISC_DR_REPAIR_ORDERS_F fact has a new column FLOW_SATUS_ID. The FLOW_STATUS_ID contains a user-defined Status for a Repair Order. The STATUS Column will continue to store the Status, now called State of the Repair Order i.e. O , C , D , H . The Initial Load incorporates the additional column FLOW_STATUS_ID. The Incremental Load s merge statement is modified to collect or update the additional column FLOW_STATUS_ID also. ","DBI for Depot Repair"

    If you don't specify a data type for a data field in the SQL Loader control file, SQL Loader assumes the data type is CHAR(255). If you have data that is larger than that, then you can't rely on the default. Try changing the control file to
    LOAD DATA
    infile *
    REPLACE
    INTO TABLE APPS.CG_COMPARATIVE_MATRIX_TAB
    FIELDS TERMINATED BY ","
    OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
    ( APPS_VERSION,
    MODULE_SHORT_NAME,
    CATEGORY,
    MODULE,
    OBJECT_NAME,
    OBJECT_TYPE,
    OBJECT_STATUS,
    FUNCTION_NAME,
    OBJ_ADDN_INFO char(4000)
    )

  • SQL Loader - Field in data file exceeds maximum length

    Dear All,
    I have a file which has more than 4000 characters in a field and I wish to load the data in a table with field length = 4000. but I receive error as
    Field in data file exceeds maximum lengthThe below given are the scripts and ctl file
    Table creation script:
    CREATE TABLE "TEST_TAB"
        "STR"  VARCHAR2(4000 BYTE),
        "STR2" VARCHAR2(4000 BYTE),
        "STR3" VARCHAR2(4000 BYTE)
      );Control file:
    LOAD DATA
    INFILE 'C:\table_export.txt'
    APPEND INTO TABLE TEST_TAB
    FIELDS TERMINATED BY '|'
    TRAILING NULLCOLS
    ( STR CHAR(4000) "SUBSTR(:STR,1,4000)" ,
    STR2 CHAR(4000) "SUBSTR(:STR2,1,4000)" ,
    STR3 CHAR(4000) "SUBSTR(:STR3,1,4000)"
    )Log:
    SQL*Loader: Release 10.2.0.1.0 - Production on Mon Jul 26 16:06:25 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Control File:   C:\TEST_TAB.CTL
    Data File:      C:\table_export.txt
      Bad File:     C:\TEST_TAB.BAD
      Discard File:  none specified
    (Allow all discards)
    Number to load: ALL
    Number to skip: 0
    Errors allowed: 0
    Bind array:     64 rows, maximum of 256000 bytes
    Continuation:    none specified
    Path used:      Conventional
    Table TEST_TAB, loaded from every logical record.
    Insert option in effect for this table: APPEND
    TRAILING NULLCOLS option in effect
       Column Name                  Position   Len  Term Encl Datatype
    STR                                 FIRST  4000   |       CHARACTER           
        SQL string for column : "SUBSTR(:STR,1,4000)"
    STR2                                 NEXT  4000   |       CHARACTER           
        SQL string for column : "SUBSTR(:STR2,1,4000)"
    STR3                                 NEXT  4000   |       CHARACTER           
        SQL string for column : "SUBSTR(:STR3,1,4000)"
    value used for ROWS parameter changed from 64 to 21
    Record 1: Rejected - Error on table TEST_TAB, column STR.
    Field in data file exceeds maximum length
    MAXIMUM ERROR COUNT EXCEEDED - Above statistics reflect partial run.
    Table TEST_TAB:
      0 Rows successfully loaded.
      1 Row not loaded due to data errors.
      0 Rows not loaded because all WHEN clauses were failed.
      0 Rows not loaded because all fields were null.
    Space allocated for bind array:                 252126 bytes(21 rows)
    Read   buffer bytes: 1048576
    Total logical records skipped:          0
    Total logical records read:             1
    Total logical records rejected:         1
    Total logical records discarded:        0
    Run began on Mon Jul 26 16:06:25 2010
    Run ended on Mon Jul 26 16:06:25 2010
    Elapsed time was:     00:00:00.22
    CPU time was:         00:00:00.15Please suggest a way to get it done.
    Thanks for reading the post!
    *009*

    Hi Toni,
    Thanks for the reply.
    Do you mean this?
    CREATE TABLE "TEST"."TEST_TAB"
        "STR"  VARCHAR2(4001),
        "STR2" VARCHAR2(4001),
        "STR3" VARCHAR2(4001)
      );However this does not work as the error would be:
    Error at Command Line:8 Column:20
    Error report:
    SQL Error: ORA-00910: specified length too long for its datatype
    00910. 00000 -  "specified length too long for its datatype"
    *Cause:    for datatypes CHAR and RAW, the length specified was > 2000;
               otherwise, the length specified was > 4000.
    *Action:   use a shorter length or switch to a datatype permitting a
               longer length such as a VARCHAR2, LONG CHAR, or LONG RAW*009*
    Edited by: 009 on Jul 28, 2010 6:15 AM

  • SQL loader Field in data file exceeds maximum length for CLOB column

    Hi all
    I'm loading data from text file separated by TAB and i got the error below for some lines.
    Event the column is CLOB data type is there a limitation of the size of a CLOB data type.
    The error is:
    Record 74: Rejected - Error on table _TEMP, column DEST.
    Field in data file exceeds maximum length
    I'm using SQL Loader and the database is oracle 11g r2 on linux Red hat 5
    Here are the line causing the error fronm my data file and my table description for test:
    create table TEMP
    CODE VARCHAR2(100),
    DESC VARCHAR2(500),
    RATE     FLOAT,
    INCREASE VARCHAR2(20),
    COUNTRY VARCHAR2(500),
    DEST     CLOB,
    WEEK     VARCHAR2(10),
    IS_SAT VARCHAR2(50),
    IS_SUN VARCHAR2(50)
    CONTROL FILE:
    LOAD DATA
    INTO TABLE TEMP
    APPEND
    FIELDS TERMINATED BY X'9' TRAILING NULLCOLS
    CODE,
    DESC,
    RATE,
    INCREASE,
    COUNTRY),
    DEST,
    WEEK,
    IS_SAT,
    IS_SUN
    Data file:
    BHS Mobile     Bahamas - Mobile     0.1430          1     "242357, 242359, 242375, 242376, 242395, 242421, 242422, 242423, 242424, 242425, 242426, 242427, 242428, 242429, 242431, 242432, 242433, 242434, 242435, 242436, 242437, 242438, 242439, 242441, 242442, 242443, 242445, 242446, 242447, 242448, 242449, 242451, 242452, 242453, 242454, 242455, 242456, 242457, 242458, 242462, 242463, 242464, 242465, 242466, 242467, 242468, 24247, 242524, 242525, 242533, 242535, 242544, 242551, 242552, 242553, 242554, 242556, 242557, 242558, 242559, 242565, 242577, 242636, 242646, 242727"               
    BOL Mobile ENTEL     Bolivia - Mobile Entel     0.0865     Increase     591     "67, 68, 71, 72, 73, 740, 7410, 7411, 7412, 7413, 7414, 7415, 7420, 7421, 7422, 7423, 7424, 7425, 7430, 7431, 7432, 7433, 7434, 7435, 7436, 7437, 7440, 7441, 7442, 7443, 7444, 7445, 7450, 7451, 7452, 7453, 7454, 7455, 746, 7470, 7471, 7472, 7475, 7476, 7477, 7480, 7481, 7482, 7483, 7484, 7485, 7486, 7490, 7491, 7492, 7493, 7494, 7495, 7496"               Thank you.

    Hi
    Thank you for youe help, I found the solution and here what i do in my Control file i added
    char(40000) OPTIONALLY ENCLOSED BY '"' .
    LOAD DATA
    INTO TABLE TEMP
    APPEND
    FIELDS TERMINATED BY X'9' TRAILING NULLCOLS
    CODE,
    DESC,
    RATE,
    INCREASE,
    COUNTRY,
    DEST
    char(40000) OPTIONALLY ENCLOSED BY '"',
    WEEK,
    IS_SAT,
    IS_SUN
    Thank you for your help.

  • If Dimension exceeds maximum size then what will we do???

    Hi Experts,
                   If Dimension exceeds maximum size then what will we do???
                   My dought was how to increase the dimension size in SSAS 2008 R2???
           i am using SQL SERVER 2008 R2.
                   i had faced this question in one of the interview.so,Could you explain with an example.
    Best Regards,
    sirikumar

    You can't exceed the maximum, else you get error. The maximum is a huge number:
    Object
    Maximum sizes/numbers
    Databases in an instance
    2^31-1 = 2,147,483,647
    Dimensions in a database
    2^31-1 = 2,147,483,647
    Attributes in a dimension
    2^31-1 = 2,147,483,647
    Members in a dimension attribute
    2^31-1 = 2,147,483,647
    User-defined hierarchies in a dimension
    2^31-1 = 2,147,483,647
    Levels in a user-defined hierarchy
    2^31-1 = 2,147,483,647
    Cubes in a database
    2^31-1 = 2,147,483,647
    LINK:
    Maximum Capacity Specifications (Analysis Services)
    Kalman Toth Database & OLAP Architect
    SELECT Video Tutorials 4 Hours
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • Error:  Debug Component exceeds maximum size (65535 bytes)

    Hi All,
    It would seem that I have come across a limitation in the CAP file format for Java Card 2.2.1. When I run the Sun 2.2.1 converter I get the following output:
    Converting oncard package
    Java Card 2.2.1 Class File Converter, Version 1.3
    Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
    error:  Debug Component exceeds maximum size (65535 bytes).
    Cap file generation failed.
    conversion completed with 1 errors and 0 warnings.This also happens with JCDK 2.2.2. Is there any way around this limitation? I can instruct the compiler to not generate some of the debug output such as variable attributes, but this makes the debugger less than useful. I could not find anything in the JCVM spec for JC2.2.1 that mentions this limitation (I could have missed it very easily if it is there). Is this a limitation that will be lifted in new versions of the standard? This is tarting to be a bit of a problem as our code base has outgrown our development tools (no more debugger). Compiling and running without debug information works fine.
    Any information on this would be much appreciated.
    Cheers,
    Shane

    For those that are interested, I found this in the Java Card VM spec. u1 and u2 are 1 and 2 byte unsigned values respectively. It would appear that it is a limitation of the CAP file format. We have managed to work around this problem (parsing the debug component of the cap file was very informative) by shortening package names, reducing exception handling, and removing classes that we could do without.
    It looks like this is removed for JC3.0 Connected Edition does not have this issue as it does not have CAP files, but JC2.2.2 and JC3.0 Classic Edition have this same issue. It would be nice if there was a converter/debugger combination that removed this limitation. If anyone knows of such a combination, I am all ears! I know for a fact that JCOP does not :(
    Cheers,
    Shane
    *6.14 Debug Component*
    This section specifies the format for the Debug Component. The Debug Component contains all the metadata necessary for debugging a package on a suitably instrumented Java Card virtual machine. It is not required for executing Java Card programs in a non-debug environment.
    The Debug Component references the Class Component (Section 6.8 "Class Component”), Method Component (Section 6.9 "Method Component”), and Static Field Component (Section 6.10 "Static Field Component”). No components reference the Debug Component.
    The Debug Component is represented by the following structure:
    {code}
    debug_component {
    u1 tag
    u2 size
    u2 string_count
    utf8_info strings_table[string_count]
    u2 package_name_index
    u2 class_count
    class_debug_info classes[class_count]
    {code}
    The items in the debug_component structure are defined as follows:
    *tag* tag item has the value COMPONENT_Debug (12).
    *size* The number of bytes in the component, excluding the tag and size items. The value of size must be greater than zero.

  • Field in data file exceeds maximum length

    Hi,
    I am trying to run the following SQL*Loader control job on my Oracle 11gR2 . Running the SQL*Loader control job results in the ‘Field in data file exceeds maximum length’ error message. Below, I am listing the control file.Please Suggest. Thanks
    It's giving me an error when I run SQL Loader on it,
    Record 61: Rejected - Error on table RMS_TABLE, column GEOM.SDO_POINT.X.
    Field in data file exceeds maximum length.
    Here is my SQL Loader Control file,
    LOAD DATA
    INFILE *
    TRUNCATE
    CONTINUEIF NEXT(1:1) = '#'
    INTO TABLE RMS_TABLE
    FIELDS TERMINATED BY '|'
    TRAILING NULLCOLS (
       Status NULLIF Status = BLANKS,
       Score,
       Match_type NULLIF Match_type = BLANKS,
       Match_addr NULLIF Match_addr = BLANKS,
       Side NULLIF Side = BLANKS,
       User_fld NULLIF User_fld = BLANKS,
       Addr_type NULLIF Addr_type = BLANKS,
       ARC_Street NULLIF ARC_Street = BLANKS,
       ARC_City NULLIF ARC_City = BLANKS,
       ARC_State NULLIF ARC_State = BLANKS,
       ARC_ZIP NULLIF ARC_ZIP = BLANKS,
       INCIDENT_N NULLIF INCIDENT_N = BLANKS,
       CDATE NULLIF CDATE = BLANKS,
       CTIME NULLIF CTIME = BLANKS,
       DISTRICT NULLIF DISTRICT = BLANKS,
    LOCATION
    NULLIF LOCATION = BLANKS,
       MAPLOCATIO
    NULLIF MAPLOCATIO = BLANKS,
       LOCATION_T
    NULLIF LOCATION_T = BLANKS,
       DAYCODE
    NULLIF DAYCODE = BLANKS,
       CAUSE
    NULLIF CAUSE = BLANKS,
       GEOM COLUMN OBJECT
         SDO_GTYPE       INTEGER EXTERNAL,
         SDO_POINT COLUMN OBJECT
           (X            FLOAT EXTERNAL,
            Y            FLOAT EXTERNAL)
    CREATE TABLE RMS_TABLE (
      Status VARCHAR2(1),
      Score NUMBER,
      Match_type VARCHAR2(2),
      Match_addr VARCHAR2(120),
      Side VARCHAR2(1),
      User_fld VARCHAR2(120),
      Addr_type VARCHAR2(20),
      ARC_Street VARCHAR2(100),
      ARC_City VARCHAR2(40),
      ARC_State VARCHAR2(20),
      ARC_ZIP VARCHAR2(10),
      INCIDENT_N VARCHAR2(9),
      CDATE VARCHAR2(10),
      CTIME VARCHAR2(8),
      DISTRICT VARCHAR2(4),
      LOCATION VARCHAR2(128),
      MAPLOCATIO VARCHAR2(100),
      LOCATION_T VARCHAR2(42),
      DAYCODE VARCHAR2(1),
      CAUSE VARCHAR2(17),
      GEOM MDSYS.SDO_GEOMETRY);

    Hi,
    Looks like you have a problem with record 61 in your data file. Can you please post it in reply.
    Regards
    Ivan

  • Field in data file exceeds maximum length - CTL file error

    Hi,
    I am loading data in new system using CTL file. But I am getting error as 'Field in data file exceeds maximum length' for few records, other records are processed successfully. I have checked the length of the error record in the extract file, it is less than the length in the target table, VARCHAR2 (2000 Byte). Below is the example of error data,
    Hi Rebecca~I have just spoken to our finance department and they have agreed that the ABCs payments made can be allocated to the overdue invoices, can you send any future invoices direct to me so that I can get them paid on time.~Hope this is ok ~Thanks~Terry~
    Is this error caused because of the special characters in the string?
    Below is the ctl file I am using,
    OPTIONS (SKIP=2)
    LOAD DATA
    CHARACTERSET WE8ISO8859P1
    INFILE  '$FILE'
    APPEND
    INTO TABLE "XXDM_DM_17_ONACCOUNT_REC_SRC"
    WHEN (1)!= 'FOOTER='
    FIELDS TERMINATED BY '|'
    OPTIONALLY ENCLOSED BY '"'
    TRAILING NULLCOLS (
                                  <Column_name>,
                                  <Column_name>,
                                  COMMENTS,
                                  <Column_name>,
                                  <Column_name>
    Thanks in advance,
    Aditya

    Hi,
    I suspect this is because of the built in default length of character datatypes in sqldr - it defaults to char(255) taking no notice of what the actual table definition is.
    Try adding CHAR(2000), to your controlfile so you end up with something like this:
    OPTIONS (SKIP=2)
    LOAD DATA
    CHARACTERSET WE8ISO8859P1
    INFILE  '$FILE'
    APPEND
    INTO TABLE "XXDM_DM_17_ONACCOUNT_REC_SRC"
    WHEN (1)!= 'FOOTER='
    FIELDS TERMINATED BY '|'
    OPTIONALLY ENCLOSED BY '"'
    TRAILING NULLCOLS (
                                  <Column_name>,
                                  <Column_name>,
                                  COMMENTS CHAR(2000),
                                  <Column_name>,
                                  <Column_name>
    Cheers,
    Harry

  • I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file  in that edit  how  to change user roles in that xml it will generate automatic id.h

    I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file  in that edit  how  to change user roles in that xml it will generate automatic id.how to do that in xml file ?

    Thanks john for you are reply.
    I had tried what you sad.I open shared service in that foundation project i had export shared service.after that in import-export file.In that role.csv,user.csv,group.csv.Like this file have.When i open user file added some users after i trying save in excel it shown messgse
    I click yes and save the .csv file and import from share servie. i got error like this
    am i doing right way john.or explain clearly

  • Zip files Exceedingly compressed size message of 30 megabytes are quarantined

    I get this message when I received a zip file over 30 megabytes.
    FILE QUARANTINED
    The original contents of this file have been replaced with
    this message because of its characteristics.
    File name: '172-16-1-4-04SEP14.ZIP'
    Malware name: 'Exceedingly compressed size'
    I have 3 question
    1. How do I turn off the function in Exchange 2013 of blocking ZIPs over 30 megabytes?
    2. Where is the "quarantine" located that the error message is referring to?
    3. If I want to how can I raise the value to 50 megabytes?
    Please do not post information about Forefront on this. This is not a Forefront problem
    Moses Hull of Alexant Systems

    Hi,
    Please check if the below information helps.
    Maximum attachment size in Transport rules that apply to all Mailbox servers in the organization can be created, set and viewed using below command
    Cmdlets to set: New-TransportRule, Set-TransportRule
    Cmdlets to Get: Get-TransportRule
    Parameter: AttachmentSizeOver
    Or in EAC
    Mail flow > Rules > Add
    or
    Edit .
    Use the predicate Apply this rule if > Any attachment >
    is greater than or equal to
    Use the predicate Apply this rule if > The message >
    size is greater than or equal to
    Refer
    http://technet.microsoft.com/en-us/library/bb124345(v=exchg.150).aspx

  • Different photos with the same file name!! How to change this?

    While I was organizing my photos, I realized there are about 30 or so photos that have the same exact file name as another photo. Example: There are two IMG_1243.jpg, but they are different pictures. They were taken at different times, even different years. I have used more than one camera to import photos. I have changed the name of one of the photos in the Title area in the information section of iPhoto. When I try to put the newly named photo into a folder that has the other IMG_1243, I get a message that says" An older item named "IMG_1243" already exists. Do you want to replace it with the newer one you are moving?"
    I want to have both IMG_1243.jpg photos in the same folder. How can I do this? Also, I have a few thousand pictures, so how can I tell exactly how many photos have the same file name as another photo?

    Celtic Mom
    Welcome to the Apple user to user discussion forums
    While I was organizing my photos, I realized there are about 30 or so photos that have the same exact file name as another photo. Example: There are two IMG_1243.jpg, but they are different pictures. They were taken at different times, even different years. I have used more than one camera to import photos. I have changed the name of one of the photos in the Title area in the information section of iPhoto. When I try to put the newly named photo into a folder that has the other IMG_1243, I get a message that says" An older item named "IMG_1243" already exists. Do you want to replace it with the newer one you are moving?"
    I want to have both IMG_1243.jpg photos in the same folder. How can I do this? Also, I have a few thousand pictures, so how can I tell exactly how many photos have the same file name as another photo?
    It sounds like you are using the finder inside the iPhoto library - do not do that - you will corrupt your library and lose the edits, keywords, etc that you have
    iPhoto does not care about duplicate file names - it handles it fine
    changing the title of a photo does not affect the file name - although when you export the photo you can use the title for the file name as an option
    What are you doing and what do you want to accomplish?
    Remember do not ever make any changes in the iPhoto library using the finder or any other program
    LN

  • Source file is wrong size- How can I "zoom-in"?

    I have a Flash file that was created for my website, but for some reason when I published the website the Flash file is much smaller than what I was reviewing by dragging and dropping it into a web-browser.  I am happy with the overall size of the Flash file when I use the zoom feature in IE, Safari, FireFox etc.  (typically zoom 2-3x).
    Is there a way to zoom without having to recreate everything in Flash? maybe an output setting or something?  I don't want to loose quality just have it bigger on the initial launch of the web link.
    Thanks
    Smith31682

    You can just change the dimensions for the movie that are specified in the html page code.  As long as you keep the width/height ratio the same, it should not distort anything. You may lose some quality visually if the uses images, but that depends how much larger you specify it to be.

  • Has maximum size for documents changed in CS4

    In InDesign CS2 and CS3 maximum file size is 5486 mm.
    Can anyone tell me if it has changed in CS4?

    I am in the middle of a job with quite large jobs between 10 - 16 metres.
    As we just ordered CS4 I wondered if it would be easier using CS4.
    But no ... Thank you for testing.

Maybe you are looking for