Source file is wrong size- How can I "zoom-in"?

I have a Flash file that was created for my website, but for some reason when I published the website the Flash file is much smaller than what I was reviewing by dragging and dropping it into a web-browser. I am happy with the overall size of the Flash file when I use the zoom feature in IE, Safari, FireFox etc. (typically zoom 2-3x).
Is there a way to zoom without having to recreate everything in Flash? maybe an output setting or something? I don't want to loose quality just have it bigger on the initial launch of the web link.
Thanks
Smith31682

You can just change the dimensions for the movie that are specified in the html page code. As long as you keep the width/height ratio the same, it should not distort anything. You may lose some quality visually if the uses images, but that depends how much larger you specify it to be.

Similar Messages

Why is my word and pdf files so large? How can I reduce the size?

My document contains mostly photos from a database via a path to the actual jpeg photos on disk.
There are 39 jpeg photos + a small amount of text with each photo.
The 39 jpeg photos on the disk add up to be 5.79 mb.
If I export the crystal reports document as [Microsoft Word (97-2003) Non Editable] the, the file size is 36.8 mb.
If I export the same data as a [Microsoft Word (97-2003) Editable] the file size is only 3.1 mb.
That is a difference of 33.7 mb! Why?
Also, when I export the same data to a PDF file it is much larger than I think it should be; 12.7 mb.
Why is my word and PDF files so large?
How can I reduce the size of the word and PDF files? (without reducing the photo quality).
Are there any tools to post process the Word or PDF files to reduce the file size?

You can't, extra size is to hold the details

A prompt that says "Could not use the clone stamp because the are to clone has not been defined (option-click to define a source point), appears EVERY time I try to use the clone stamp. What is wrong and how can I fix this

A prompt that says "Could not use the clone stamp because the are to clone has not been defined (option-click to define a source point), appears EVERY time I try to use the clone stamp. What is wrong and how can I fix this?

If a tool is acting up, one suggestion is to reset the tool.
Ctrl-click on the clone tool icon in the Options bar and select Reset Tool.

Mac OS X 10.6.8 desktop goes black 10 secs after booting, can remain apparently asleep for 15 mins. I can't prompt it to wake, until recently it would wake when peripheral were added (earphones). What is wrong, and how can this be fixed?

Mac OS X 10.6.8 statup problem: desktop goes black 10 secs after booting, can remain apparently asleep for 15 mins. I can't prompt it to wake, until recently it would wake when peripheral were added (earphones). What is wrong, and how can this be fixed?

You need to fresh install 10.6, programs fresh form original sources and return only vetted files (no TM migrations) from a regular storage drive
But this when erasing the drive use the Security Option: Zero All Data before installing 10.6
What has happened your data got corrupted and it's corrupted on the TM drive too.
So the Zero will map off bad sectors on your drive, the 10.6 install will be fresh, the programs will be fresh and only files will be returned, you'll find out in short order which ones they are.
Reducing bad sectors effect on hard drives
How to erase and install Snow Leopard 10.6
Once you are back up, then consider making a option key bootable clone.
Most commonly used backup methods explained

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

I have recently updated my CC programs to the latest version and now all of my files wont open by default into their respective programs, only if I open the program and go to file open and open the file from there. How can I fix this?

I have recently updated my CC programs to the latest version (CC2014) and now all of my files wont open by default into their respective programs, only if I open the program and go to file>open and open the file from there. How can I fix this?
I have tried 'Open with' and the version of the program now installed on my computer isn't even suggested as an option and when I browse for it, the file wont open with it anyway

On Windows (don't know about Mac), the latest version will always take over the file association, and become the default for indd files. It's impossible to change it.
But there is a plugin for ID that makes this possible. Never tried it myself.
https://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/

I am trying to use siri. It was working earlier. Now when I ask it to call name and number it say, Siri keeps saying( SORRY SOMETHINGS GONE WRONG CAN YOU TRY AGAIN) I HAVE TRIED SEVERAL NAMES AND NUMBERS IN MY CONTACTS. What am I doing wrong or how can

I am trying to use siri, Siri keeps saying( SORRY SOMETHINGS GONE WRONG CAN YOU TRY AGAIN)
I HAVE TRIED SEVERAL NAMES AND NUMBERS IN MY CONTACTS.
What am I doing wrong or how can I correct it.

Siri Fix
Turn OFF Siri
Reset Network Settings
Turn ON Siri
Done
Steps:
Tap Settings App>General>Siri>Turn OFF
General>Reset, near bottom>Reset Network Settings
Tap Settings App>General>Siri>Turn ON
Done

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results.

I re-installed XP and kept the old program files on another drive, how can I transfer my bookmarks list to the new Firefox ?

I re-installed XP and kept the old program files on another drive, how can I transfer my bookmarks list to the new Firefox ?
I tried shifting the Profile folder contents from the old to the new, that seemed to work but I kept getting a message that my security was affected and that the problem could be in that folder so I shifted it back.

Hello Kencrews,
When you connect the iPod to the computer and iTunes is authorized for your Apple ID, then you will get a prompt to transfer the purchases from the device to the computer. Keep in mind this will only transfer purchased items from the iTunes Store.
Here is a helpful article to assist getting that done.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
Regards,
Sterling

I am trying to listen BBC radio news from BBC App, but on pressing the button I always get the error "there was an error playing this radio feed". What is the source of this error and how can I remove it?

I am trying to listen BBC radio news from BBC App, but on pressing the button "live radio" I always get the error "there was an error playing this radio feed". What is the source of this error and how can I remove it?

That is probably just a generic error message and you might not ever know what is causing it. Assuming that you have been able to play live radio with the app in the past (I know nothing about the app) and assuming that all other Internet related functions (Safari, email, etc.) are working properly on your iPad, quit the app completely and reboot your iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that fails to resolve the issue, you might want to reboot your router, unplug it for about 30 seconds and then plug it in again.

HT1386 I have a new computer. I have copied Itunes library from an external hard drive. Itunes now tells me I cannot sync with my Ipod as it thinks the 20gb on the computer are different to the 20gb on my Ipod touch! What have I done wrong? How can I fix

I have a new computer. I have copied Itunes library from an external hard drive. Itunes now tells me I cannot sync with my Ipod as it thinks the 20gb on the computer are different to the 20gb on my Ipod touch! What have I done wrong? How can I fix it? Alan

See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek

Using bootcamp was installing windows xp, at the select ntfs or fat format selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error.

using bootcamp, was installing windows xp, at the select ntfs or fat format mistakenly selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error. and doesn't respond to press any key. When looking in the startup disk section, windows on boot camp can be seen, but not selected. (13"MacBook Pro 10.6.8)

Have a read here http://support.apple.com/kb/TS1722 for solution.
Stefan

Can't talk to other apple products outside of wifi or when I don't have data. What's wrong and how can I fix it ?

So I just bought a new iPhone 4S and I have to share my data with four other people so to avoid using it up I use wifi whenever possible. I use iMessage to talk to iPhones but when I'm not around wifi or when I don't have any more data, I don't receive any of their regular SMS messages but I can send them. I checked my friend's iPhone and he receives my message as an SMS but when he replied it was still in iMessage. Is it not detecting that my iMessage is off ?What's wrong and
how can I fix it ?

I think I fixed the apps, though.
*Turn off your wifi and only turn it on when you want to use it
*Lower your brightness
*Turn off "Push" on notifications and mail and turn on "Manual"
*Return to your home screen and then double click twice and tap and hold one of the apps you've previously opened, when they jiggle tap the red on each app until fully erased.
*Don't use your ipod while it is charging, allow at least a 10 minute charge (fully charged) before using it again.
See if this helps(: ... I still have no answer bout the camera issue. I might be going to apple soon so we will see then.

My iMessages freezes when it gets through about 90% of the loading bar. Then the message doesn't send at all. My iPod's only about 2 week old, what's wrong and how can I fix it?

My iMessages freezes when it gets through about 90% of the loading bar. Then the message doesn't send at all. My iPod's only about 2 week old, what's wrong and how can I fix it?

Maybe:
iOS: Troubleshooting Messages

Source file is wrong size- How can I "zoom-in"?

Similar Messages

Maybe you are looking for