Bound error message always shown twice?
In my project every input field is bound to its own message-component.
But if I start the project and the validator finds an error, all the error-messages are shown twice and I have no idea why! I checked the error-messages in the beans, there is everything ok.
Does anybody know how to solve the problem?
Thanks!
thanks for the feedback.
@ Darryl.Burke
Your suggestion sounds quite good, but I can not imagine how this could work.
You wrote:
call requestFocusInWindow on the next component in the traversal cycleTo clearify my needs: I want to ensure for e.g. the JTextfield "dateTxt" a verification (starting my methode checkDate()) for the following cases:
- verify the user-input after leaving the JTextfield via "pressing the TAB-key" (in other words loosing the focus) or
- start a verification after "pressing ENTER-key".
I?m not sure, wether these needs are practical with your suggestion...Do you have any code example of your solution? So I can better understand your idea...
Similar Messages
-
Why can't I use my apple id in imessage? Network connection error message always comes up!
I have iphone5 currently on the latest iOS 6.1.2. I am connected to wifi which is perfectly working. My iMessage is perfectly working using my mobile number but can't add my apple ID. When i try to add my apple ID to use for imessage, an error message always comes up: "Could not sign in. Please check your network connection and try again." How can I resolve this? any help would be greatly appreciated.
Read here:
http://support.apple.com/kb/TS4268 -
after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode -
i downloan and updated my iphone software ...i have tried to activate it back but it is not working out error message always what can i do?
this is the error message........we are sorry we can not continue with your activation please contact customer care
another message will say actiavtion server not available;
please what should i do? -
Prevent that error messages are displayed twice
Hi All!
How can I prevent that error messages are displayed twice.
The FuBa is called at the backend more than one time (at least twice)
therefore I get every message twice.
Regards
sasSas-
I'm not sure if I understood your problem. Are you saying that you have a service which you call in a loop, and display the error message in the loop as well? If so an option would be to have a [HashMap|http://java.sun.com/j2se/1.4.2/docs/api/java/util/HashMap.html] where the key is the error message id, and the value is the error message. In the loop check if the error message id returned by your service already exists in the map and add it only if absent. Then after your loop is complete use the MessageManager to display your consolidated error messages.
Cheers-
Atul -
I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?
Are you trying to update via wifi or connected to your computer?
Cheers, Tom -
Hi Everyone.
I am new to FPGA field.
I am trying to make a system with UART and MicroBlaze for communication with mini USB with terminal.
From the XAPP1180 "Reference system: Kintex-7 MicroBlaze System Simulation Using IP Integrator"
it was successful to test and understand the connection between mini-USB with terminal by displaying "hello world"
So, I wanted to do my own system, with uart and microblaze only without DDR3 (unlike XAPP1180 reference system).
new block design, chose uart/micro blaze --> auto connection
pin mapping .xdc
bit generation
export (include bit stream)
make new hardware platform with .hdf
program fpga (select .bit/.bmm )
and the error message is shown as
couldn't open "D:/MICRO_BLAZE/uart/uart_only/uart_only.sdk/design_1_wrapper_hw_platform_0/download.bit": no such file or directory
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 64 bytes at 0x0048B088 for a 'fileSpecType' record.
Total memory in use at allocation was 8688 bytes.
Source file "ParseUtils.c", line number 13179.
Memory contents:
0048B088: 48 F9 48 00 00 00 00 00 18 D7 48 00 00 00 00 00 H.H.......H.....
0048B098: A8 F7 48 00 00 00 00 00 98 B5 48 00 00 00 00 00 ..H.......H.....
0048B0A8: E8 D9 48 00 00 00 00 00 2F 00 00 00 0F 00 00 00 ..H...../.......
0048B0B8: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 26 bytes at 0x0048D708 for a StrNew.
Total memory in use at allocation was 8679 bytes.
Source file "StringUtils.c", line number 423.
Memory contents:
0048D708: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0048D718: 44 3A 00 00 00 00 00 00 00 00 D:........
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 83 bytes at 0x0048F798 for a StrNew.
Total memory in use at allocation was 8705 bytes.
Source file "StringUtils.c", line number 423.
Memory contents:
0048F798: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0048F7A8: 2F 4D 49 43 52 4F 5F 42 4C 41 5A 45 2F 75 61 72 /MICRO_BLAZE/uar
0048F7B8: 74 2F 75 61 72 74 5F 6F 6E 6C 79 2F 75 61 72 74 t/uart_only/uart
0048F7C8: 5F 6F 6E 6C 79 2E 73 64 6B 2F 68 65 6C 6C 6F 5F _only.sdk/hello_
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 34 bytes at 0x0048B588 for a StrNew.
Total memory in use at allocation was 8788 bytes.
Source file "StringUtils.c", line number 423.
Memory contents:
0048B588: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0048B598: 68 65 6C 6C 6F 5F 75 61 72 74 00 00 00 00 00 00 hello_uart......
0048B5A8: 00 00 ..
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 27 bytes at 0x0048D9D8 for a StrDup.
Total memory in use at allocation was 8822 bytes.
Source file "FileUtils.c", line number 2866.
Memory contents:
0048D9D8: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0048D9E8: 65 6C 66 00 00 00 00 00 00 00 00 elf........
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 99 bytes at 0x0048F938 for a StrPostCat.
Total memory in use at allocation was 8846 bytes.
Source file "StringUtils.c", line number 2232.
Memory contents:
0048F938: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0048F948: 44 3A 2F 4D 49 43 52 4F 5F 42 4C 41 5A 45 2F 75 D:/MICRO_BLAZE/u
0048F958: 61 72 74 2F 75 61 72 74 5F 6F 6E 6C 79 2F 75 61 art/uart_only/ua
0048F968: 72 74 5F 6F 6E 6C 79 2E 73 64 6B 2F 68 65 6C 6C rt_only.sdk/hell
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 48 bytes at 0x0048F878 for a 'BDSwitchDataType' record.
Total memory in use at allocation was 8849 bytes.
Source file "CmdParseUtils.c", line number 467.
Memory contents:
0048F878: 00 00 00 00 00 00 00 00 88 B0 48 00 00 00 00 00 ..........H.....
0048F888: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0048F898: 01 00 00 00 00 00 00 00 98 DB 48 00 00 00 00 00 ..........H.....
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 34 bytes at 0x0048B3A8 for a StrDup.
Total memory in use at allocation was 9107 bytes.
Source file "CmdParseUtils.c", line number 583.
Memory contents:
0048B3A8: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0048B3B8: 64 65 73 69 67 6E 5F 31 5F 69 00 00 00 00 00 00 design_1_i......
0048B3C8: 00 00 ..
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 16 bytes at 0x0048DB98 for 'CharPtrArrayType' data.
Total memory in use at allocation was 9123 bytes.
Source file "StringUtils.c", line number 901.
Memory contents:
0048DB98: B8 B3 48 00 00 00 00 00 00 00 00 00 00 00 00 00 ..H.............
cmd /C data2mem -bm \
D:/MICRO_BLAZE/uart/uart_only/uart_only.runs/impl_1/design_1_wrapper_bd.bmm -bt \
D:/MICRO_BLAZE/uart/uart_only/uart_only.runs/impl_1/design_1_wrapper.bit -bd \
C:/Xilinx/SDK/2015.2/data/embeddedsw/lib/microblaze/mb_bootloop_le.elf tag \
design_1_i/microblaze_0 -o b \
D:/MICRO_BLAZE/uart/uart_only/uart_only.sdk/design_1_wrapper_hw_platform_0/download.bit
ERROR:Data2MEM:59 - Expected a 'tag' or 'tag' keyword in -bd option. Instead, encountered '/'.
data2mem.exe -bm D:/MICRO_BLAZE/uart/uart_only/uart_only.runs/impl_1/design_1_wrapper_bd.bmm -bt D:/MICRO_BLAZE/uart/uart_only/uart_only.runs/impl_1/design_1_wrapper.bit -bd C:/Xilinx/SDK/2015.2/data/embeddedsw/lib/microblaze/mb_bootloop_le.elf tag design_1_i/microblaze_0 -o b D:/MICRO_BLAZE/uart/uart_only/uart_only.sdk/design_1_wrapper_hw_platform_0/download.bit
^
Release 14.6 - Data2MEM P_INT.20150528, build 3.0.10 Apr 3, 2013
Copyright (c) 1995-2015 Xilinx, Inc. All rights reserved.
data2mem
<-bm FILENAME [.bmm]> |
<<[-bm FILENAME [.bmm]]>
<-bd FILENAME [<.elf>|<.mem>] [<[<boot [ADDRESS]>] tag TagName <TagName>...>]>...
<-o <u|v|h|m|b|p> FILENAME [.ucf|.v|.vhd|.mem|.bit|.bmm]>
<-p PARTNAME>
-i>> |
<-u> |
<<-bd FILENAME [.elf]> -d [e|r]> [<-o m FILENAME [.mem]>]>> |
<<-bm FILENAME [.bmm]>
<-bd FILENAME [<.elf>|<.mem>] [<[<boot [ADDRESS]>] tag TagName <TagName>...>]>...
<-bt FILENAME [.bit]> <-o b FILENAME [.bit]>> |
<<-bm FILENAME [.bmm]> <-bt FILENAME [.bit]> -d -[<o d FILENAME [.dmp]>]>> |
<-bx [FILEPATH]> |
<-mf <p PNAME PTYPE PID <a SNAME MTYPE ASTART BWIDTH <s BSIZE DWIDTH IBASE>...>...>...>> |
<<-pp FILENAME [.bmm]> <-o p FILENAME [.bmm]>> |
<-f FILENAME [.opt]> |
<-w [on|off] > |
<-q [s|e|w|i]> |
<-intstyle silent|ise|xflow> |
<-log FILENAME [.log]> |
<-h [<option [< option>...]> | support ]> |
<-encrypt [bbram | efuse] [StartCBC=<hex_string>] [Key0=<hex_string>] [HMAC=<hex_string>] [FILENAME[.nky]]>
-h option_list | all | sup[port]
Print help text for command line options. If only a '-h' is given, then
only the option summary is output. If the '-h' is followed by a space
separated list of option names (without the dash), help is output for
the listed options. For example, '-h bm bd i' gives help on the 'bm',
'bd', and 'i' options. Use '-h all' for help on all options. Lastly,
use '-h support' to list the devices the tool supports. The keyword
'support' can be abbreviated up to 'sup'.
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 64 bytes at 0x001DD5C8 for a 'fileSpecType' record.
Total memory in use at allocation was 8673 bytes.
Source file "ParseUtils.c", line number 13179.
Memory contents:
001DD5C8: E8 FB 1D 00 00 00 00 00 98 B9 1D 00 00 00 00 00 ................
001DD5D8: 48 F9 1D 00 00 00 00 00 48 FB 1D 00 00 00 00 00 H.......H.......
001DD5E8: 28 BA 1D 00 00 00 00 00 2F 00 00 00 0F 00 00 00 (......./.......
001DD5F8: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 26 bytes at 0x001DB988 for a StrNew.
Total memory in use at allocation was 8659 bytes.
Source file "StringUtils.c", line number 423.
Memory contents:
001DB988: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
001DB998: 43 3A 00 00 00 00 00 00 00 00 C:........
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 74 bytes at 0x001DF938 for a StrNew.
Total memory in use at allocation was 8685 bytes.
Source file "StringUtils.c", line number 423.
Memory contents:
001DF938: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
001DF948: 2F 58 69 6C 69 6E 78 2F 53 44 4B 2F 32 30 31 35 /Xilinx/SDK/2015
001DF958: 2E 32 2F 64 61 74 61 2F 65 6D 62 65 64 64 65 64 .2/data/embedded
001DF968: 73 77 2F 6C 69 62 2F 6D 69 63 72 6F 62 6C 61 7A sw/lib/microblaz
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 38 bytes at 0x001DFB38 for a StrNew.
Total memory in use at allocation was 8759 bytes.
Source file "StringUtils.c", line number 423.
Memory contents:
001DFB38: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
001DFB48: 6D 62 5F 62 6F 6F 74 6C 6F 6F 70 5F 6C 65 00 00 mb_bootloop_le..
001DFB58: 00 00 00 00 00 00 ......
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 27 bytes at 0x001DBA18 for a StrDup.
Total memory in use at allocation was 8797 bytes.
Source file "FileUtils.c", line number 2866.
Memory contents:
001DBA18: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
001DBA28: 65 6C 66 00 00 00 00 00 00 00 00 elf........
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 94 bytes at 0x001DFBD8 for a StrPostCat.
Total memory in use at allocation was 8821 bytes.
Source file "StringUtils.c", line number 2232.
Memory contents:
001DFBD8: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
001DFBE8: 43 3A 2F 58 69 6C 69 6E 78 2F 53 44 4B 2F 32 30 C:/Xilinx/SDK/20
001DFBF8: 31 35 2E 32 2F 64 61 74 61 2F 65 6D 62 65 64 64 15.2/data/embedd
001DFC08: 65 64 73 77 2F 6C 69 62 2F 6D 69 63 72 6F 62 6C edsw/lib/microbl
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 48 bytes at 0x001DD7C8 for a 'BDSwitchDataType' record.
Total memory in use at allocation was 8824 bytes.
Source file "CmdParseUtils.c", line number 467.
Memory contents:
001DD7C8: 00 00 00 00 00 00 00 00 C8 D5 1D 00 00 00 00 00 ................
001DD7D8: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
001DD7E8: 01 00 00 00 00 00 00 00 D8 BB 1D 00 00 00 00 00 ................
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 34 bytes at 0x001DFDE8 for a StrDup.
Total memory in use at allocation was 9082 bytes.
Source file "CmdParseUtils.c", line number 583.
Memory contents:
001DFDE8: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
001DFDF8: 64 65 73 69 67 6E 5F 31 5F 69 00 00 00 00 00 00 design_1_i......
001DFE08: 00 00 ..
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 16 bytes at 0x001DBBD8 for 'CharPtrArrayType' data.
Total memory in use at allocation was 9098 bytes.
Source file "StringUtils.c", line number 901.
Memory contents:
001DBBD8: F8 FD 1D 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Am I missing some steps or specific (setup/configuration) for this project?
Please help me
Hi,
You need to increase size of BRAM in your system.
This might solve the issue.
Regards
Praveen
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
-
JDBC driver 10.02: error messages always English?
When changing from JDBC driver 9 to 10.02 the error messages are not presented in the preferred national language any more but always in English. The classes12.jar contains the property files for different languages, but even when the parameter -Duser.language=de is given, the English messages continue to appear. Does anybody know how this behaviour can be changed? I did not find a hint in the README files.
Regards
GeraldRight. I have diagnosed the issue. It is caused by the removal of the "CIS"
territory from Oracle Database XE. I have logged bug #5114250.
If you have access to the applicaction source code, try the following workaround:
boolean workaround = false;
Locale origLocale = Locale.getDefault();
if ( origLocale.toString().equals( "ru_RU" ) ) {
Locale.setDefault( new Locale( "en", "US" ) );
workaround = true;
DriverManager.registerDriver( new OracleDriver() );
Connection conn = DriverManager.getConnection(
"jdbc:oracle:thin:system/manager@//localhost:1522/ORA92.PL.ORACLE.COM"
System.out.println( "Connected." );
if ( workaround ) {
Statement stmt = conn.createStatement();
String territory = "CIS";
if ( conn.getMetaData().getDatabaseMajorVersion() >= 10 )
territory = "RUSSIA";
stmt.execute(
"ALTER SESSION SET NLS_LANGUAGE='RUSSIAN' NLS_TERRITORY='"
+ territory +"'" );
stmt.close();
System.out.println( "NLS_TERRITORY changed to " + territory );
Locale.setDefault( origLocale );
-- Sergiusz -
Error message always showing up when i connect to ...
My Nokia asha 302 does not connect to the INTERNET . The Nokia Browser would always show the error
message; Page proxy authentication required. Everything stops there. Please help me to resolve this issue.
Thank you.Are you using a Wi-Fi network? If yes, is that your own Wi-Fi or a corporate one like of your job or school?
-
firefox.exe - Application Error
The instruction at 0x100072b8 referenced memory at 0x100072b8. The memory could not be read.
Click on OK to terminate the program
Click on CANCEL to debug the program
Either of the above options terminates Mozilla - neither option fixes the problem - however Mozilla works as long as the error message remains on the desktop.We cannot know. You are not offering any system information nor actually telling what program you use and what you do when the crash occurs.
Mylenium -
Error Messages not shown correctly
Hello People,
I do not know if I have posted this topic in the correct forum. We have developed an application for a client. Everything was working perfectly when we deployed it on the server at the client...
However recently, they upgraded their database from version 9.2.0.1.0 to 9.2.0.8.0
After we redeployed the application on the upgraded database, now when running the application, exceptions that we caught and handled by supplying customized error messages are no longer showing...
An example is as follows:
Field Name is mandatory...
So we put it as 'required'.
When this is not entered, our message is that 'Name should be entered'...
But now this message is no longer showing
Oracle Database used: 9i (9.2.0.8.0)
Application Server: 10g AS
Can someone please help?
ThanksHi Petri,
Error 500 is a very general error that implies a failure on the server side.
Please verify that the server is running opening the XML client from SAP ME XML utilities and sending the same XML request.
https://server:port/manufacturing-xml/
If you still get the error-I would suggest to open a ticket and provide us with the trace so that we can determine the exact root cause.
Thank you,
German -
If I make a change to a document in acrobat, I cannot save it. An error message always comes up.
I have Adobe Acrobat XI. I can make PDF files very easily, however if I edit a file and try to save, I get the following error message.
"The document could not be saved. The files may be read-only or another user may have it open. Please save the document with a different name or in a different folder."
I have looked, it is not read-only, and I am for sure the only one with this file open.
Any suggestions - this driving me crazy!Thank you, you just solved the problem I have been having since upgrading to Adobe Standard XI also. I was going nuts because everytime I tried to make a change to a PDF and save it, I got the same error message. I turned the preview pane off in windows explorer and now everything works. Thanks again!!!
-
Please help my printer talk to my computer. An error message pops up whenever I try to print. I have tried the firefox self-help on this topic and it doesn't work. I need direct help with this problem.
message is: "an unknown error occurred while printing" with the yellow icon and exclamation point. this is all it says every time.
-
Error messages are displayed twice.
Hi,
In my application in validateEntity() method of a entitiy I do some validation like this:
protected void validateEntity() {
if (this.getReqType() == null)
throw new JboException("Please select value for Rquest Type.");
but displayed error massage displayed twice :
1.Please select value for Rquest Type.
2.Please select value for Rquest Type.See Re: duplicate error messages
-
When installing iTunes, an error message always shows
I have tried to install iTunes many times, and I've tried all different versions just to make sure it wasn't one particular version that didn't work. It gets to the final page of installation and it says "iTunes installer completed. Errors occurred during installation before iTunes could be configured. Your system has not been modified. To complete the installation, run the installer again." I have tried so many times on many different days I just need to reinstall iTunes ASAP. Please help! What do I do? Thanks!
Hello krystalclear59
If you are having issues with installing iTunes, then check the article below to verify that you tired one of these options during your many attempts to install iTunes.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
-Norm G.
Maybe you are looking for
-
How can I add a new column to Grid view under Tests tab
I understand in "ORACLE Test manager for web Applications", the Grid view under Tests tab should be customised. How can I add a new column to Grid view under Tests tab? Thanks Katherine
-
My security questions need to be reset. The email address used to set up the account is no longer active so I cannot get access to the security question reset information.
-
I've been trying to burn my projects in imovie to dvd's and i keep getting the forllowing error message "UNABLE TO PRPARE PROJECT FOR PUBLISHING" "The Project could not be prepared for publishing because an error occured (Error in user parameter list
-
Request Message mapping in SXMB_MONI for File - RFC - File without BPM
Hi , In my File-RFC-File scenario, the messages are processed successfully. but when i look into the SXMB_MONI for File to RFC step, the records are present only till the Message split According to Receiver List and not able to see the records from
-
When I click a new tab, I can't get any of the 9 boxes to show my previous browsing history. I have tried changing browsing, privacy and history settings and nothing has worked. The boxes still stay gray, not clickable. Any suggestions?