During program FPGA, error message is shown as-- couldn't open "................................................./download.bit" : no such file or directory

Hi Everyone.
I am new to FPGA field.
I am trying to make a system with UART and MicroBlaze for communication with mini USB with terminal.
From the XAPP1180 "Reference system: Kintex-7 MicroBlaze System Simulation Using IP Integrator"
it was successful to test and understand the connection between mini-USB with terminal by displaying "hello world"
So, I wanted to do my own system, with uart and microblaze only without DDR3 (unlike XAPP1180 reference system).
new block design, chose uart/micro blaze --> auto connection
pin mapping .xdc
bit generation
export (include bit stream)
make new hardware platform with .hdf
program fpga (select .bit/.bmm )
and the error message is shown as
couldn't open "D:/MICRO_BLAZE/uart/uart_only/uart_only.sdk/design_1_wrapper_hw_platform_0/download.bit": no such file or directory
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 64 bytes at 0x0048B088 for a 'fileSpecType' record.
Total memory in use at allocation was 8688 bytes.
Source file "ParseUtils.c", line number 13179.
Memory contents:
0048B088: 48 F9 48 00 00 00 00 00 18 D7 48 00 00 00 00 00 H.H.......H.....
0048B098: A8 F7 48 00 00 00 00 00 98 B5 48 00 00 00 00 00 ..H.......H.....
0048B0A8: E8 D9 48 00 00 00 00 00 2F 00 00 00 0F 00 00 00 ..H...../.......
0048B0B8: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 26 bytes at 0x0048D708 for a StrNew.
Total memory in use at allocation was 8679 bytes.
Source file "StringUtils.c", line number 423.
Memory contents:
0048D708: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0048D718: 44 3A 00 00 00 00 00 00 00 00 D:........
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 83 bytes at 0x0048F798 for a StrNew.
Total memory in use at allocation was 8705 bytes.
Source file "StringUtils.c", line number 423.
Memory contents:
0048F798: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0048F7A8: 2F 4D 49 43 52 4F 5F 42 4C 41 5A 45 2F 75 61 72 /MICRO_BLAZE/uar
0048F7B8: 74 2F 75 61 72 74 5F 6F 6E 6C 79 2F 75 61 72 74 t/uart_only/uart
0048F7C8: 5F 6F 6E 6C 79 2E 73 64 6B 2F 68 65 6C 6C 6F 5F _only.sdk/hello_
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 34 bytes at 0x0048B588 for a StrNew.
Total memory in use at allocation was 8788 bytes.
Source file "StringUtils.c", line number 423.
Memory contents:
0048B588: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0048B598: 68 65 6C 6C 6F 5F 75 61 72 74 00 00 00 00 00 00 hello_uart......
0048B5A8: 00 00 ..
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 27 bytes at 0x0048D9D8 for a StrDup.
Total memory in use at allocation was 8822 bytes.
Source file "FileUtils.c", line number 2866.
Memory contents:
0048D9D8: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0048D9E8: 65 6C 66 00 00 00 00 00 00 00 00 elf........
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 99 bytes at 0x0048F938 for a StrPostCat.
Total memory in use at allocation was 8846 bytes.
Source file "StringUtils.c", line number 2232.
Memory contents:
0048F938: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0048F948: 44 3A 2F 4D 49 43 52 4F 5F 42 4C 41 5A 45 2F 75 D:/MICRO_BLAZE/u
0048F958: 61 72 74 2F 75 61 72 74 5F 6F 6E 6C 79 2F 75 61 art/uart_only/ua
0048F968: 72 74 5F 6F 6E 6C 79 2E 73 64 6B 2F 68 65 6C 6C rt_only.sdk/hell
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 48 bytes at 0x0048F878 for a 'BDSwitchDataType' record.
Total memory in use at allocation was 8849 bytes.
Source file "CmdParseUtils.c", line number 467.
Memory contents:
0048F878: 00 00 00 00 00 00 00 00 88 B0 48 00 00 00 00 00 ..........H.....
0048F888: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0048F898: 01 00 00 00 00 00 00 00 98 DB 48 00 00 00 00 00 ..........H.....
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 34 bytes at 0x0048B3A8 for a StrDup.
Total memory in use at allocation was 9107 bytes.
Source file "CmdParseUtils.c", line number 583.
Memory contents:
0048B3A8: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0048B3B8: 64 65 73 69 67 6E 5F 31 5F 69 00 00 00 00 00 00 design_1_i......
0048B3C8: 00 00 ..
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 16 bytes at 0x0048DB98 for 'CharPtrArrayType' data.
Total memory in use at allocation was 9123 bytes.
Source file "StringUtils.c", line number 901.
Memory contents:
0048DB98: B8 B3 48 00 00 00 00 00 00 00 00 00 00 00 00 00 ..H.............
cmd /C data2mem -bm \
D:/MICRO_BLAZE/uart/uart_only/uart_only.runs/impl_1/design_1_wrapper_bd.bmm -bt \
D:/MICRO_BLAZE/uart/uart_only/uart_only.runs/impl_1/design_1_wrapper.bit -bd \
C:/Xilinx/SDK/2015.2/data/embeddedsw/lib/microblaze/mb_bootloop_le.elf tag \
design_1_i/microblaze_0 -o b \
D:/MICRO_BLAZE/uart/uart_only/uart_only.sdk/design_1_wrapper_hw_platform_0/download.bit
ERROR:Data2MEM:59 - Expected a 'tag' or 'tag' keyword in -bd option. Instead, encountered '/'.
data2mem.exe -bm D:/MICRO_BLAZE/uart/uart_only/uart_only.runs/impl_1/design_1_wrapper_bd.bmm -bt D:/MICRO_BLAZE/uart/uart_only/uart_only.runs/impl_1/design_1_wrapper.bit -bd C:/Xilinx/SDK/2015.2/data/embeddedsw/lib/microblaze/mb_bootloop_le.elf tag design_1_i/microblaze_0 -o b D:/MICRO_BLAZE/uart/uart_only/uart_only.sdk/design_1_wrapper_hw_platform_0/download.bit
^
Release 14.6 - Data2MEM P_INT.20150528, build 3.0.10 Apr 3, 2013
Copyright (c) 1995-2015 Xilinx, Inc. All rights reserved.
data2mem
<-bm FILENAME [.bmm]> |
<<[-bm FILENAME [.bmm]]>
<-bd FILENAME [<.elf>|<.mem>] [<[<boot [ADDRESS]>] tag TagName <TagName>...>]>...
<-o <u|v|h|m|b|p> FILENAME [.ucf|.v|.vhd|.mem|.bit|.bmm]>
<-p PARTNAME>
-i>> |
<-u> |
<<-bd FILENAME [.elf]> -d [e|r]> [<-o m FILENAME [.mem]>]>> |
<<-bm FILENAME [.bmm]>
<-bd FILENAME [<.elf>|<.mem>] [<[<boot [ADDRESS]>] tag TagName <TagName>...>]>...
<-bt FILENAME [.bit]> <-o b FILENAME [.bit]>> |
<<-bm FILENAME [.bmm]> <-bt FILENAME [.bit]> -d -[<o d FILENAME [.dmp]>]>> |
<-bx [FILEPATH]> |
<-mf <p PNAME PTYPE PID <a SNAME MTYPE ASTART BWIDTH <s BSIZE DWIDTH IBASE>...>...>...>> |
<<-pp FILENAME [.bmm]> <-o p FILENAME [.bmm]>> |
<-f FILENAME [.opt]> |
<-w [on|off] > |
<-q [s|e|w|i]> |
<-intstyle silent|ise|xflow> |
<-log FILENAME [.log]> |
<-h [<option [< option>...]> | support ]> |
<-encrypt [bbram | efuse] [StartCBC=<hex_string>] [Key0=<hex_string>] [HMAC=<hex_string>] [FILENAME[.nky]]>
-h option_list | all | sup[port]
Print help text for command line options. If only a '-h' is given, then
only the option summary is output. If the '-h' is followed by a space
separated list of option names (without the dash), help is output for
the listed options. For example, '-h bm bd i' gives help on the 'bm',
'bd', and 'i' options. Use '-h all' for help on all options. Lastly,
use '-h support' to list the devices the tool supports. The keyword
'support' can be abbreviated up to 'sup'.
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 64 bytes at 0x001DD5C8 for a 'fileSpecType' record.
Total memory in use at allocation was 8673 bytes.
Source file "ParseUtils.c", line number 13179.
Memory contents:
001DD5C8: E8 FB 1D 00 00 00 00 00 98 B9 1D 00 00 00 00 00 ................
001DD5D8: 48 F9 1D 00 00 00 00 00 48 FB 1D 00 00 00 00 00 H.......H.......
001DD5E8: 28 BA 1D 00 00 00 00 00 2F 00 00 00 0F 00 00 00 (......./.......
001DD5F8: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 26 bytes at 0x001DB988 for a StrNew.
Total memory in use at allocation was 8659 bytes.
Source file "StringUtils.c", line number 423.
Memory contents:
001DB988: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
001DB998: 43 3A 00 00 00 00 00 00 00 00 C:........
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 74 bytes at 0x001DF938 for a StrNew.
Total memory in use at allocation was 8685 bytes.
Source file "StringUtils.c", line number 423.
Memory contents:
001DF938: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
001DF948: 2F 58 69 6C 69 6E 78 2F 53 44 4B 2F 32 30 31 35 /Xilinx/SDK/2015
001DF958: 2E 32 2F 64 61 74 61 2F 65 6D 62 65 64 64 65 64 .2/data/embedded
001DF968: 73 77 2F 6C 69 62 2F 6D 69 63 72 6F 62 6C 61 7A sw/lib/microblaz
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 38 bytes at 0x001DFB38 for a StrNew.
Total memory in use at allocation was 8759 bytes.
Source file "StringUtils.c", line number 423.
Memory contents:
001DFB38: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
001DFB48: 6D 62 5F 62 6F 6F 74 6C 6F 6F 70 5F 6C 65 00 00 mb_bootloop_le..
001DFB58: 00 00 00 00 00 00 ......
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 27 bytes at 0x001DBA18 for a StrDup.
Total memory in use at allocation was 8797 bytes.
Source file "FileUtils.c", line number 2866.
Memory contents:
001DBA18: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
001DBA28: 65 6C 66 00 00 00 00 00 00 00 00 elf........
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 94 bytes at 0x001DFBD8 for a StrPostCat.
Total memory in use at allocation was 8821 bytes.
Source file "StringUtils.c", line number 2232.
Memory contents:
001DFBD8: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
001DFBE8: 43 3A 2F 58 69 6C 69 6E 78 2F 53 44 4B 2F 32 30 C:/Xilinx/SDK/20
001DFBF8: 31 35 2E 32 2F 64 61 74 61 2F 65 6D 62 65 64 64 15.2/data/embedd
001DFC08: 65 64 73 77 2F 6C 69 62 2F 6D 69 63 72 6F 62 6C edsw/lib/microbl
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 48 bytes at 0x001DD7C8 for a 'BDSwitchDataType' record.
Total memory in use at allocation was 8824 bytes.
Source file "CmdParseUtils.c", line number 467.
Memory contents:
001DD7C8: 00 00 00 00 00 00 00 00 C8 D5 1D 00 00 00 00 00 ................
001DD7D8: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
001DD7E8: 01 00 00 00 00 00 00 00 D8 BB 1D 00 00 00 00 00 ................
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 34 bytes at 0x001DFDE8 for a StrDup.
Total memory in use at allocation was 9082 bytes.
Source file "CmdParseUtils.c", line number 583.
Memory contents:
001DFDE8: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
001DFDF8: 64 65 73 69 67 6E 5F 31 5F 69 00 00 00 00 00 00 design_1_i......
001DFE08: 00 00 ..
INTERNAL_ERROR:Data2MEM:45 - Memory allocation leak of 16 bytes at 0x001DBBD8 for 'CharPtrArrayType' data.
Total memory in use at allocation was 9098 bytes.
Source file "StringUtils.c", line number 901.
Memory contents:
001DBBD8: F8 FD 1D 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Am I missing some steps or specific (setup/configuration) for this project?
Please help me

Hi,
You need to increase size of BRAM in your system.
This might solve the issue.
Regards
Praveen
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.

Similar Messages

File won't save - error message is: "...could not be saved. No such file or directory." (?)

File will not save or 'save as' - error message is: "...could not be saved. No such file or directory." File has been save previously. Is this a preference issue or perhaps a permissions issue?

I repeat that everything dedicated to the save process is different.
The app contain two sets of code, one used under 10.6.8, an other one used under Lion.
Here are the two states of the File Menu under Lion.
Compare them to what you get under 10.6.8.
State #1 when the frontmost document was never saved :
The menu item Save is replaced by Save…
No longer Save As… menu item replaced by Duplicate
New item : Revert Document… (disabled)
State #2 : when the frontmost document was saved at least once.
Save… is replaced by Save a Version
Duplicate is always here
Revert Document… is now enabled.
There is an important change in the title bar too.
When a file was edited we get the word Edited on the right of the doc's name. This word is the title of a local menu :
Triggering Browe All Versions give us what I already posted in the thread :
https://discussions.apple.com/message/16523021
Yvan KOENIG (VALLAURIS, France) jeudi 27 octobre 2011 11:49:49
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Pacman issue - error: .. : No such file or directory.

It seems I have my first issue, and it's with Pacman. I get this error everytime I sync the database or install a package, even though everything seems to go fine.
error: /var/lib/pacman/extra/flite-1.3-2/desc: No such file or directory
I don't know what flite is but it won't install it as it doesn't exist even though there is a directory called "flite-1.3-2" and it's empty. I've tried removing the directory but synching the database doesn't put it back. Also I've used 'pacman -Scc' to clear cache but still no joy.

archuser wrote:
It seems I have my first issue, and it's with Pacman. I get this error everytime I sync the database or install a package, even though everything seems to go fine.
error: /var/lib/pacman/extra/flite-1.3-2/desc: No such file or directory
I don't know what flite is but it won't install it as it doesn't exist even though there is a directory called "flite-1.3-2" and it's empty. I've tried removing the directory but synching the database doesn't put it back. Also I've used 'pacman -Scc' to clear cache but still no joy.
delete the directory /var/lib/pacman/extra and run pacman -Sy to restore. I believe if you delete just the flite directory it won't restore with Sy.

Error in background job for program RSGET_SMSY error message No active job

Hello!
I would like to set up the Change Request Management functionality in SAP Solution Manager.
The only red warning by executing Test-button in Tcode SOLAR_ADMIN_PROJECT is:
<b>Error in background job for program RSGET_SMSY error message No active job found</b>
Can someone please tell me how to solve this problem?
(tcodes, technical steps)
Thank you very much!
regards
Thom

Thank you very much!
Can you also help me with the warning "Errors occurred during synchronization of the system landscape" in tcode SOLAR_PROJECT_ADMIN" --> System landscape --> Change requests --> "Refresh"?
The second issue I cannot see any projects in Tcode "/TMWFLOW/CMSCONF"
according to the SPRO-step "Set Project Assignment of Requests as Mandatory"
Thank you!
regards

Not able to install Logic on mac with OSX. 10.8.2. Error message: Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported. I have logic studio 8 software purchased in 2007 and upgraded with logic studio 9 (purchased in 2009)

After an earlier attempt to move Logic from my other mac (OSX 10.6.8) with the migration assistant to my new mac with OSX 10.8.2. I've re-started the whole start up process by erasing the hard drive from the new machine and build it up from scratch. After a new "out of the box" start, I decided to install LOGIC from my disks : starting with my 2007 package Logic Studio 8 and upgrading with my Logic 9 package from 2009. When trying to start to install 2008 I got the error message : Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported.
What does this mean? HOw do I get this working under 10.8.2 as it works flawlessly under OSX 10.6.8. For sure I didn't buy a new machine to have OSX 10.8.2 but I suspect this is the roadblock to installing my logic package.
Help!

Mark,
Sorry...
I completely lost the thread (I actually got confused between you and another poster on a another forum that was asking the same basic question) and somehow ended up thinking you were trying to install on a PPC Mac
My apologies and please ingnore those parts of my last post relating to the PPC Macs...
You have an Intel Mac and therefore Logic Studio 2 Boxed Upgrade set should install/run on your Mac without issue. As I said earlier.. you do not need to try and install from the original Logic Studio 1 /Logic 8 Boxed set...(It won't work anyhow because you have an Intel Mac and that version had a PPC installer) but just install from the Logic Studio 2 / Logic Pro 9 Upgrade Boxed setof DVDs instead...
Have you tried the "Make Disk Image" solution I gave earlier? That normnally works under such circumstances as what you are describing can happen when your DVD drive cannot read the DVDs correctly... I have had this situation myself where one drive read them okay and another failed to do so for whatever reason. Making and then installing from Disk images of those exact same disks resolved the issue for me...
You can try to reinstall directly from the DVDs of course though under some circumstances it may not allow you to reinstall Logic Pro itself if that part of the original installation attempt was successful... in which case you can also try this... (It's probably the easiest method if Logic 9 was already installed and present in your Apps Folder)
If the Logic Pro App is in your applications folder..
Run Software Updates to update Logic Pro to a version that will run under 10.8.2 (The initially installed version of Logic will not)
Run Logic
Go to the menu bar in Logic and select Logic Pro/Install Additional Content and select all content in there..
This content is basically exactly the same as what is stored on the remaining DVDs of the boxed set so you might not need to use the rest of the DVDs to install from but download it all instead from Apple Servers...

After itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)

after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)

Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode

Bound error message always shown twice?

In my project every input field is bound to its own message-component.
But if I start the project and the validator finds an error, all the error-messages are shown twice and I have no idea why! I checked the error-messages in the beans, there is everything ok.
Does anybody know how to solve the problem?
Thanks!

thanks for the feedback.
@ Darryl.Burke
Your suggestion sounds quite good, but I can not imagine how this could work.
You wrote:
call requestFocusInWindow on the next component in the traversal cycleTo clearify my needs: I want to ensure for e.g. the JTextfield "dateTxt" a verification (starting my methode checkDate()) for the following cases:
- verify the user-input after leaving the JTextfield via "pressing the TAB-key" (in other words loosing the focus) or
- start a verification after "pressing ENTER-key".
I?m not sure, wether these needs are practical with your suggestion...Do you have any code example of your solution? So I can better understand your idea...

During sync, itoons error message "User's iphone cannot be synced. You do not have enough access priviledges for this operation." Never happened before, any ideas what to do? Checked and new computer is authorized. Greg

During sync, itoons error message "User's iphone cannot be synced. You do not have enought access proviliedges for this operation". Never happened before, any ideas what to do? Checked and new computer is authorized. Greg

I hope this helps. Not the easiest fix, but I suspect it will solve the problem.
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/itun es-privileges-error-with-windows-7/d616e06f-ecdd-4d34-8d7a-a9936a91ad6e

Just downloaded mavericks, now iPhoto won't load because of an error message that says "You can't open the application "IPhoto" because it is not supported on this type of Mac" . I have a 17" MacBook Pro, mid 2010 model running 2.53 GHz and Intel Core I5,

I just downloaded the new Mavericks operating sytem on my mid 2010 MacBook Pro, 17" 2.53GHz, Intel Core I5 machine. My IPhoto is no longer working at all, I'm getting an error message that says - "You Can't open the application "IPhoto" because it is not supported on this type of Mac". I also loaded Mavericks onto my other MacBook Pro 17", mid 2009 model and everything works fine. I would think that the newer Mac would easily work with IPhoto. Also, when I try to download from the App Store, it asks for my Apple ID and Password, I enter it, and then the little spinning color wheel just spins forever, with nothing ever happening. I tried downloading the IPhoto Upgrade but it never actually downloads, HELP!!!

What version of iPhoto do you have installed? Is if one of the versions shown as not compatible in this screenshot?
If it is then go to the App Store and download iPhoto 9.5. It will be free if you have an iPhoto 9 or later verson currently.
OT

HT1926 I was loading an update to my i-Tunes for my computer and got an error message and now I can not open my computer itunes and may have lost all the content. What do I do?

I got a request from apple to update my itunes and while uploading the update, the program gave an error message and now I can not open my itunes and fear that all my music etc is gone? what do I do to correct this problem?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

There is error 'No such file or directory' during loading custom authentica

Hi,
I am working on OBIEE authentication using Hyperion shared services. I did the necessary changes in config file, like modifying config.xml to enable HSSauthenticator and enabling external authentication to instanceconfig.xml. However BI Server is unable to load the driver file for the Hyperion custom authenticator. Here is the error message.
There is error 'No such file or directory' during loading custom authentication module '/opt/local/usr/home/Oracle/OracleBI/web/bin64/libsawobisauthenticatorproxy643r.so'.
2011-06-26 21:04:05
[nQSError: 13011] Query for Initialization Block 'Hyperion EPM' has failed.
I have set the env variable LD_LIBRARY_PATH to this path but still I am getting the same error msg. I also have full previleges on this file. Would be really great if anyone can tell me why I am unable to load this driver file on to server. Thanks in advance

I think I figured out. Instead of giving path thru bin64 , I gave it thru bin folder, which is a 32bit file. I think they installled a 32bit OBIEE.

On some of my files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?" Then when I click "Locate", I get nothing.

I'm really dumbfounded on this one and it's driving me bonkers!!!! On some of my music files there is a ! in front of it, if I try to play the song, I get an error message; "The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
This began to happen when Chuck made playlists2burn on2CD-and then he would delete the playlist; sending all the song files into oblivion. Certain songs have a ! right next to the file name, and as I stated before, i get that error message:
"The song "_____" could not be used, because the original file could not be found. Would you like to locate it?"
So I click on "Locate". No help. I get a menu with folders that say "catroot" and other folders which names I cannot remember, but I scroll PAST the file folders, & it's just a bunch of ".DLL" files.....I don't understand what any of the names of the folders mean...it's frustr8ing-coz this is my 2nd iTouch, my 1st one got stolen & I can't afford2buy my music back at this time & i NEVER before had a single problem with losing song file locations.
              Is there anyone out there who has been through this frustrating game of chasing your tail?....<that's how I feel>
If so I would be ever so gr8ful if maybe someone with the knowledge would be so kind as 2 tell me how/where 2 retrieve these songs & how to put everything back where it belongs, I would be 4ever gr8ful !!!
I can't afford 2 replace the songs just like I'm unable 2 buy back my old music from my stolen iTouch....man that was an awesome collection-someday I'll be able 2 afford 2 do that & I would like 2 have all the new music that I paid 4 but cannot find when I got my new iTouch....that would just be wonderful.
             I hope someone sees this post that can help me retrieve these files....losing $100.00 of iTunes is a REAL BUMMER!!!!!!
                                                  ThanQ SO very much!
                                                                         [email protected] or [email protected] or [email protected] .
                                                                                           You can also find me on Facebook, my given name is Tiffinie Trimmer, &
                                                                                            that's my Facebook "handle". ThanQ 4 taking the time 2 read all of this!
                                                                                            hope 2 get a reply someday....I'll B checking all my emails & my Facebook, as well
                                                                                            as marking this page in my FAVORITES so I can find it fast! Take Care!!!

I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

I recently did a system update and installed Yosemite on my Mac. Now I am unable to open CS5 at all. The error message I get is this: "To open Adobe Photoshop CS5.1, you need to install legacy Java SE 6 runtime." I have tried downloading this and it still

I recently did a system update and installed Yosemite on my Mac. Now I am unable to open CS5 at all. The error message I get is this: "To open Adobe Photoshop CS5.1, you need to install legacy Java SE 6 runtime." I have tried downloading this and it still gives me the same mess

In the details it is mentioned that it is an outdated version of Java.
Is this a security risk that i need to live with to get CS5 to run with Yosemite?
Also i need to reject messages from Java in the future about updates, or not?
thx for any input

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

wen6275,
It looks like you're actually using a camera or phone to take a photo of your monitor.
That's not what is commonly known as a "screen shot".
It looks like you're on a Mac. Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file. Would you mind elaborating?

I am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me

Dear ALL,
i am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me solutions.
var myBookFileName ,myBookFileName_temp;
                if ( myFolder != null )
                        var myFiles = [];
                        var myAllFilesList = myFolder.getFiles("*.indd");
                        for (var f = 0; f < myAllFilesList.length; f++)
                                    var myFile = myAllFilesList[f];
                                    myFiles.push(myFile);
                        if ( myFiles.length > 0 )
                                    myBookFileName = myFolder + "/"+ myFolder.name + ".indb";
                                    myBookFileName_temp=myFolder.name ;
                                    myBookFile = new File( myBookFileName );
                                    myBook = app.books.add( myBookFile );
                                   myBook.automaticPagination = false;
                                    for ( i=0; i < myFiles.length; i++ )
                                               myBook.bookContents.add( myFiles[i] );
                                    var pdfFile =File(File(myFolder).fsName + "\\"+myBookFileName_temp+"_WEB.pdf");
                                    var bookComps = myBook.bookContents;
                                    if (bookComps.length === 1)
                                                   bookComps = [bookComps];
                                     var myPDFExportPreset = app.pdfExportPresets.item("AER6");
                                    app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFEx portPreset,bookComps);
                                  //myBook.exportFile (ExportFormat.pdfType, pdfFile, false);
                                  //myBook.exportFile(pdfFile, false, pdfPref, bookComps);
                                    myBook.close(SaveOptions.yes);

Change the below line:
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset,bookComps);
to
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset);
Vandy

During program FPGA, error message is shown as-- couldn't open "................................................./download.bit" : no such file or directory

Similar Messages

Maybe you are looking for