BP_ADDR - Where is ADR_STATUS Physically Stored

Can someone tell me where ( table-wise ) the following attribute is stored ?
Component        : BP_ADDR
View             : BP_ADDR/StandardAddress
Context Node     : STANDARDADDRESS
Attribute        : STRUCT.ADR_STATUS
While knowing the answer would be helpful, knowing how I can find it myself would be extremely educational.
Thanks...

Hi All. I have found my field.
We are on a new solution, FRM - Fund Raising Management. It is based on CRM. The underlying version of CRM is 7.0.
The field was in an extension of BUT020 .
Thanks...
...Mike

Similar Messages

Where are output module presets physically stored?

I have a broken XP installation that is not fixable but the drive is accesible from my other Windows installation.
Before I broke XP I deactivated my CS3 and now I have it installed and activated in Windows 7.
Now I am really missing all my output module presets. I can import them, but then I should have exported them first, which is not an option.
The AppData folder is really full of stuff
Here are some other important folders when migrating. In this case D: is the old installation drive:
D:\Program Files (x86)\Adobe\Adobe After Effects CS3\Support Files\Scripts\
D:\Program Files (x86)\Adobe\Adobe After Effects CS3\Support Files\Templates\
D:\Users\[Username]\AppData\Adobe\After Effects\8.0\
Media Encoder presets:
D:\Users\[Username]\AppData\Adobe\After Effects\8.0\MediaIO\Presets
But hey no Output Modules in there..

Hi,
Thanks for the reply.
I think you misunderstood me though. There was nothing wrong with the Adobe installation. It was my operating system that I broke. Sort of on purpose. I just assumed I could get my settings back the good old manual way instead of using the program. And I was right for the most part. Don't worry, I know what I am doing. I just didn't know the output module presets weren't stored in either the application folder or the AppData folder.
So what I need to know is where those presets are physically stored so I can get them back too.
Oh I hope it's not the registry. That's the one thing I cannot touch. But then again why would it be in the registry when everything else is stored in files and AE is portable to OSX anyway and they don't have a registry.

Where are tablespace, table structure, package physically stored?

Running Oracle 11g on Linux.
My disk settings are:
/dev/sda1 (boot)
/dev/sda2 (/)
/dev/sda3 (/u01) for Oracle software. Base: /u01/app/oracle
/dev/sda4 (swap)
/dev/sdb1 ASM disk for DATA
/dev/sdc1 ASM disk for DATA
/dev/sdd1 ASM disk for FRA
1. Where are the tablespace, table structure (such as table name, column name, column type, primarykey key, and index), package, procedure, trigger, and function PHYSICALLY stored? I want to know the common directory path and disk location?
2. When the Fast Recovery Area (FRA) does the backup job, will the tablespace, table structure (column, type, key, index), package, procedure, trigger, and function also be backed up to the Fast Recovery Area (FRA), in addition to the data files, control files, redo logs and archived logs?
Thanks

You need understand the difference and concept about Physical Storage Structures and Logical Storage Structures.
http://docs.oracle.com/cd/E11882_01/server.112/e16508/physical.htm
http://docs.oracle.com/cd/E11882_01/server.112/e16508/logical.htm
/dev/sdb1 ASM disk for DATA
/dev/sdc1 ASM disk for DATA
/dev/sdd1 ASM disk for FRA
1. Where are the tablespace, table structure (such as table name, column name, column type, primarykey key, and index), package, procedure, trigger, and function PHYSICALLY stored? I want to know the common directory path and disk location?Probably your database is stored on ASM Filesystem, wich are using the /dev/sdb1 and /dev/sdc1. So if your database files is on ASM "DATA" diskgroup then all objects is there.
Query V$DATAFILE, V$CONTROLFILE, V$LOGFILE, V$TEMPFILE
2. When the Fast Recovery Area (FRA) does the backup job, will the tablespace, table structure (column, type, key, index), package, procedure, trigger, and function also be backed up to the Fast Recovery Area (FRA), in addition to the data files, control files, redo logs and archived logs?FRA is used to hold backups of database then your objects are backed up there too.
Use RMAN to check it:
LIST BACKUP;
LIST ARCHIVELOG ALL;
Edited by: Levi Pereira on Oct 8, 2012 12:05 PM
Edited by: Levi Pereira on Oct 8, 2012 12:09 PM

Where are the Schemas Stored in 5.5 SP4?

Hi Experts,
I am using SAP MDM 5.5 SP4.
From Syndicator, when I open a Port, I can see the schema structure in Item mapping.
I would like to know where are these Schemas physically stored?
NOTE: I do not see the path/schema/xsd in Console under the 'XML Schemas' node.
Thanks!

Hi,
Check the MDM Business Content folder for *.xsd - Business_Content\Material\XSDs\XSD
Use this xsd to create a syndication map or create your own syndication map.
Then unload the repository, In Console go to Map for the particular port and select the syndication map that you created.
Check the Syndicator guide for more details - http://help.sap.com/saphelp_mdm550/helpdata/en/ff/37e4c6857449388ddb6c77f160ac4f/frameset.htm
Thanks,
Shambhu.

Where are java classes stored?

Does anyone where the java classes are physically stored?
Is there any mechanism for getting them out?
null

Thanks, Irian,
in the meantime I have found another solution. For Windows it works using environment variable IDE_USER_DIR.
Create a new directory for the runtime files, e.g. C:\sqldevtemp
Add environment variable IDE_USER_DIR with the value of "C:\sqldevtemp".
Close SQL Developer, move (or copy if you want) all files from the old folder to the new folder and start SQL Developer again.
Done.

CG36VEN - where are the files stored?

Transaction CG36VEN is intended to allow users to "Import Vendor MSDS" documents (and actually, other documents as well.) My question is, where are these documents physically stored? As someone who works with DMS and Archivelink, I'd like to know what the default behavior of this transaction is, and if it's possible to configure it to utilize the Content server if it doesn't do it by default.
Thanks!
Bill Bessette

hi,
The following data carrier types are supported as secure storage areas for storing original application files:
1. SAP Database (settings available in standard SAP System)
    The SAP Database is a Secure Storage Area that is predefined internally in the standard SAP System. This storage method is suitable for small files (for example, text files) because all of the original application files are also stored to the database.
2. Archive (selection in Customizing Document Management and data transport using the SAP ArchiveLink interface)
The archive is a Secure Storage Area t hat the original files are transported to via the SAP ArchiveLink interface. T
The archiving process takes place on a special archive server.
3. Vault (definition in Customizing Document Management)
   You can set up a vault in the standard SAP System where the original application files are transferred to the frontend
   computers via an application server.
4. HTTP content Server: external server, stores originals through Kpro. this is more recomended for DMS.
According to your Configuration of Storage senarios u have to select these methods.
EX: Business document in your case u have to select Archivelinking via HTTP content server.
Uneed basic configuration for Archivelinking.
suppose u did not configured your document type and storage menthods, thet time Sytem stores original in SAP DATA BASE.
this is not recomanded. So your document is in SAP DB. Not in Content server. i guess.
Benakaraj
??P

FSG using Report Manger - Where are the reports stored?

I am able to configure the FSG in GL, and use Report Manager to produce PDF/Excel output.
Where are these reports physically stored? Are they in a database or in a file system? If so, what is the location?
Thanks.

hi,
Starting 11i, the reports are stored in table FND_LOBS and some relevant Entries are made in the FND_DOCUMENTS_TL table.
The packages used for storing and retrieving the reports are FND_DOCUMENTS_PKG and ADI_DISPLAY_REPORT.
RG_REPORT_REQUEST_LOBS stores the XML output associated with each Financial Statement Generator request that is run in XML mode.
The XML output is used for drilldown purposes.
For further Information on Report Manager see also:
(Doc ID 726774.1) - Report Manager - Master Note
(Doc ID 858505.1) - Report Manager Troubleshooting
(Doc ID 726958.1) - Report Manager (FRM) List of Patches
best regards, Martin

I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore. If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore. If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

I am using dw cc and I just double click picture I want to change in dreamweaver cc and my image folder opens, select new photo and then it updates and I am good to go, I am using a mac

Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off?

Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off? chessatwork has ran great for me for many yrs, then one day I down loaded firefox and went to play chess on this site chessatwork.com, well the window popped up asking to remember the log in and pass word and so I said ok, and it did, but now when I click log in and I go to my main page (home) and click on any link, say to play game I return right back to log in

See http://kb.mozillazine.org/Deleting_autocomplete_entries<br />
Remove a saved password here: Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
You may also need to remove the cookies from that website.<br />
* Tools > Options > Privacy > Cookies: "Show Cookies"

I downloaded a word file from an inbox mail (the mail app) onto my iPad2, where is this file stored? How can I delete it if it takes up space in my iPad? Any ideas??

I downloaded a word file from an inbox mail (the mail app) onto my iPad, where is this file stored? How can I delete it if it takes up space in my iPad? Any ideas??

Did you ever figure out what happened?
I had the same experience as you did, but in my case it was a big fat pdf that Mail insisted I had to download before I could view it. As happened with you, I saw the file actually downloading, and after a time I was able to view the pdf. It's been my assumption that the pdf is still somewhere on my iPad, but I have no idea where, nor how to delete it if it is still there.
Thanks.

Where are printer drivers stored in OS 10.8?

I am trying to set up a Epson Stylus Photo R3000 as a new printer on OS 10.8. The printer setup locates the printer and automatically selects Epson Stylus R3000 with the notation "The selected printer software is available from Apple. Click Add to download and add this printer." However, clicking on Add leads eventually to an error message: "Can't install the software for the EPSON Epson Stylus Photo R3000 because it is not currently available fromthe Software Update server." This result blocks me from setting up the printer.
I know the driver is part of the Epson driver software package that is installed with OS 10.8. I would like to select it manually. My question is where are printer drivers stored? How do I select a driver?
Thanks in advance!

While a bit of a stretch, you can download the entire Epson printer package from Apple and install it. This will include all drivers for all Epson devices as opposed to the one just for your system. The package is 1GB in size, but will include everything supported.
The package can be downloaded here: http://support.apple.com/kb/DL1398
This following knowledgebase article says your printer is definitely supported, so the driver should be in that package: http://support.apple.com/kb/HT3669#epson

ICal Problem with Mobile Account/Home and where are the calendars stored

I am using MacMinis in an office with my MacPro SnowLeopard Server running LDAP with NetworkHome accounts. Almost everything works except this ical is driving me nuts.
The problem is iCals don't sync with the NetworkHome. When I look in usr/library/calendars a new calendar appears there but it won't sync on to a different machine.
What is even more frusterating, if I disconnect the server so I am just logging in locally, I can delete all the calanders in usr/library/calendars, but when I log back in the calendars just re-appear. So where else is ical storing calendar information?
thanks
jake

where else is ical storing calendar information?
in a folder in usr/library/syncservices/local. You will have to look in the clientname.txt file in each of the folders to find which one is for iCal.
AK

Where the table is stored.,temp tablespace is not freed .

I have created one table in oracle 8.1.7 containing 500 mega records .
my question is
1. where the table is stored as the size of users.dbf is just 20 mb and is used upto only 2 MB.
so it must not be there.
2. the size of tools.dbf in tools tablespce is somewhere around 13GB. is it there?
if yes then why?
3. also the size of temp01.dbf+temp02.dbf + temp03.dbf in temp table space is somewhere around 14 gb and it is going on increasing. say when i give command to create index it after running for some 8 hrs gives error that disk space is full . when i again run he command after adding more file and space the command runs but the space earlier utilised in temp is not released .
i have tried restrating the oracle service . but it does not release the space utilised by temp.Also the table space is temp not permanent.
IMP.
4. can i manually delete the data files in temp.
will it affect my database????
thanksin adv.

I have created one table in oracle 8.1.7 containing 500 mega records .
my question is
1. where the table is stored as the size of users.dbf is just 20 mb and is used upto only 2 MB.
so it must not be there.
2. the size of tools.dbf in tools tablespce is somewhere around 13GB. is it there?
if yes then why?
3. also the size of temp01.dbf+temp02.dbf + temp03.dbf in temp table space is somewhere around 14 gb and it is going on increasing. say when i give command to create index it after running for some 8 hrs gives error that disk space is full . when i again run he command after adding more file and space the command runs but the space earlier utilised in temp is not released .
i have tried restrating the oracle service . but it does not release the space utilised by temp.Also the table space is temp not permanent.
IMP.
4. can i manually delete the data files in temp.
will it affect my database????
thanksin adv. Query user_segments as the table owner. This will tell you which tablespace (also the size of you table allocation).
Query dba_data_files, may need to be a DBA account (e.g. system). This will relate files to tablespaces.
The files in dba_data_files and in v$logfile and the control files listed in init<sid>.ora comprise your database.
Hope this helps
Ken

Old mac wont boot xcpt via firewire, want to move iphoto files from old to new, where are the pics stored?

old mac wont boot xcpt via firewire, want to move iphoto files from old to new, where are the pics stored?

Photos are stored in your home folder (~pictures).
Barry

Looking for answers on XMP files - where should they be stored as sidecar files? With the original raw file or in a separate folder?

Looking for answers on XMP files - where should they be stored as sidecar files? With the original raw file or in a separate folder?
Relatively new user of Adobe LR5 and PS CC, about a year old.
If they should be stored somewhere beside the folder that contains the originals, where and how to change the settings?
If I choose to write metadata to the original files, is that sidecar files or does the XMP file show separately?
To be honest, I usually find a video and I cannot figure this out. I have never received an answer on any of my questions by the way.

Hi there,
You answered a prior question from me so I wanted to reach out to you about this. I just need a step by step on how, if possible, to View LRCC on my MacBookPro when the main interface is on my iMac

BP_ADDR - Where is ADR_STATUS Physically Stored

Similar Messages

Maybe you are looking for