BP ROLE ACCOUNT _ CRMACC

Hi ,
I have seen a new BP ROLE Account(Standard role not enhanced role) , it has same views and data sets as Sold to Party and also the Standard assignment for BP role Account is Sold to Party. Now my question is what is difference between both Account and Sold to Party,Is there any benefit utilizing Account role than Sold-to-party?
We are using CRM 2007 .
Appreciate your help and thanks in advance!!!
Regards
RR

hi
there is a difference between the account and sold to party role,you said that the view is same,it might be but as you go inside the screen of both the roles you will find a sales area data tab which is present only in the sold to party role but not inside the account role
see the sold to party role is attained when delievery is finally done that is the customer has purchased the order so the role is sold to party ,there is a sales data that needs to be maintained,
now on the basis of ur requirement you can chose what role you can ,if no sales info you want to maintain then i would advise use account role.
best regards
ashish

Similar Messages

Stellent Backup/Restore - Roles & Accounts missing

I am trying to restore one of my environments onto a test box but I'm running into an issue.
I used the configuration migration utility to pull over everything. Things look good except when I go into 'User Admin' the roles and accounts are missing. Only the stardard ones exist.
What is it that pulls that information over?
Thanks

I am using 7.5.1 (trying to upgrade to 7.5.2) so you pointed me in the right direction.
When using archiver I can preview all of the roles/account but when I go to import it into the new system I can only see sysadmin and one or two other accounts (out of hundreds) in the preview.
Any ideas? I'm breaking out the book to read up on archiving now.
Thanks
Side note - Would you be able to recommend any reliable consulting firms in the chicagoland area for Stellent work?
Thanks

SAP Treasury In-House Cash. BP role 'account holder'

Hi friends,
Iam trying to create a BP with role 'BKK010 Account holder '. But the system displays the error ' The transferred GUI Function BKK4 does not exist'.
Can someone kindly respond.
Thanks in advance.

Dear Taro,
Kindly refer the help document from SAP in the link below.
[IHC Help Documentation|http://help.sap.com/erp2005_ehp_04/helpdata/EN/34/239739f4e38a2ce10000000a11402f/frameset.htm]
Regards,
Jitesh

Set default role for Account in SAP CRM 7.0

We are using SAP CRM 7.0
When an end user creates a new account there is a section called
"Role" sub assignment block with entries like "Competitor", "Account", Contact Person, etc.
I want by default when you create an account that the role Account is specified in there.
I want it done automatically and do not want to rely on the end user to seelct this.
I was able to do this with contacts by using an SAP note to set this for cotnact person.
But does anyone know how to do it for an Account ?
All I want to do is that when an account is created the system automatically sets the role as "Account".
Thanks,
Jon

Hi Jon,
For any code changes in bsp components we need it's z-instance and that we get after enhancing the respective entity for eg views, context nodes etc..
In case you are not familiar with the enhancement, please refer to some thread which explain about the component enhancement concept.
Coming to this requirement..
You need to enhance bp_roles component, then enhance rolelist view and roles context node.. redefine the GET_V_PARTNERROLE method.. copy the parent class code and do the necessary changes to manipulate the entries in gt_ddlb_add
Check the statement at line no 107..
gr_ddlb_roles->set_selection_table( it_selection_table = gt_ddlb_add ).
Just before above statment call, manipulate gt_ddlb_add to keep the required role value at index 1..
Another thing in my test system i can't see any role as "Account" under SPRO customizing "Business Partner Roles" instead "Business Partner (Gen.)" is available, don't know if you are able to see Account Role in the Roles DDLB..
i would suggest debug the get_v_partnerrole method once at line no 107 see the entries in gt table you will get an idea what you need to change.
Hope this helps..
Cheers,
Sumit Mittal

Problem with roles in CRM 5.0 PC-UI

Hi everybody!
I have a problem with CRM 5.0 PC-UI.
When I have user profile SAP_ALL, BSP's are showed correctly.
When I'm using restricted profile (for example role 'Account manager'), for some BSP's I'm receiving this error:
Exception Class CX_CRM_BSP_NOAUTH
Error name
Program name CL_CRM_BSP_FRAME_MAIN=========CP
Include CL_CRM_BSP_FRAME_MAIN=========CM003
ABAP Class CL_CRM_BSP_FRAME_MAIN
Method DO_INIT
Row 170
Long Text --
I've explored the role SAP_PCC_ACCOUNT_MANAGER in pfcg transaction, and realized:
on tab 'Menu' in section 'Portal Roles'
when I click on service: HS PC-UI PC-UI_CRMD_MKTSEG
In section 'External Service'
There are only '?????????' in the field 'Type of Ext. Service' instead of 'PC-UI'
and strange chars in the field 'Service'.
But for example service: HS PC-UI PC-UI_CRMM_CONTACT is OK, and I'm receiving BSP.
I think, that something important is missing.
Do you have any idea how to solve this problem?
Thanks
Radka

I am not sure whether you resolveed this issue already..
Under Portal Roles you find PCUI external services which refers to auth objects in order to access PCUI application.
Read thru the section "Tracing Authority Objects of Blueprint Applications" under PCUI cook book .
Thanks,
Thirumala.

IC Webclient Enhancement - Account Identification

Hi Experts,
I have a requirement to include a new view in the Account Identification screen, and it is not working. I have explained the requirement and my steps below. Sorry that it is lengthy, I thought of providing all the details.
I have the following scenario:
In IC Webclient Account Identification, I need to call a custom view (built in a custom component) on clicking the confirm button on Ibase component. This is how it should work:
i) Launch IC webclient sales role, account identification is the default screen. This is component CRMCMP_BPIDENT.
ii) Search for an account and confirm an account. The component and view displaying the account information is ICCMP_BP_DETAIL/BupaDetailB2B
iii) The Ibase is already setup, so on confirming an account, the corresponding Ibase components are shown in the result list. So, we select an ibase component. The selected Ibase details is shown in ICCMP_IBASE/IbaseDetails
iv) On clicking the confirm button on the ibase, a new view should be shown below the Ibase view. Component and view is ZCOMP/Myview
I am unable to see MyView as in step (iv).
I have done the following:
Component ZCOMP:
i) Created the component ZCOMP and created a view MyView
ii) Created an inbound flag "IP_DEFAULT" in the MainWindow (default window).
iii) Exposed the window and inbound flag in the component interface
Component ICCMP_IBASE:
i) Enhanced the component and its view IBDetails (as this view contains the confirm button).
ii) Created an outbound plug in the view. Plug = "CALLORDERSCREEN".
iii) Created an outbound plug in the window containing this view. Plug = "DMSORDER".
iv) In the OP_CALLORDERSCREEN method, code as below:
DATA: lr_window TYPE REF TO cl_bsp_wd_window.
lr_window = me->view_manager->get_window_controller( ).
lr_window->call_outbound_plug( 'dmsorder' ).
v) Under the window method OP_DMSORDER, coded as below:
fire_outbound_plug( iv_outbound_plug = 'dmsorder' ).
vi) Redefined the method "EH_ONCONFIRM" for the event "ONCONFIRM" in the view.
vii) In the redefined method EH_ONCONFIRM, coded as below:
IF lv_cucobupa->is_cp_selected( ) EQ '0' OR lv_cucobupa->is_cp_selected( ) EQ '1'
      OR lv_cucobupa->is_cp_selected( ) IS INITIAL.
     op_callorderscreen( ). " Just added this line and commented the below line. Rest ofcode is same
*    gr_window->call_outbound_plug( 'interactionhistory' ). "#EC NOTEXT
ENDIF.
viii) Exposed the outbound plug "DMSORDER" in the component interface.
Component ICCMP_BPIDENT:
i) There is already a component usage for Ibase. Added the outbound plug "DMSORDER".
ii) Added the new component ZCOMP in the usage and added its inbound plug "DEFAULT".
iii) Since the view MyView needs to be displayed below Ibase view, I did as below:
Created a new view area "Order" under the viewset CRMCMP_BPIDENT/BuPaIdentifyCustomer and added my view under this viewarea. Also, made the position changes in the view layout of CRMCMP_BPIDENT/BuPaIdentifyCustomer (BuPaIdentifyCustomer.htm)
iv) Created a navigational link as below:
ID = "dmsorder"
Source View = Window of ICCMP_IBASE containing the view IBDetails
Outbound plug = DMSORDER
Target view = MainWindow of component ZCOMP
Inbound plug = DEFAULT
I put breakpoints in each of the plug methods.....and found the following:
i) The method OP_DMSORDER in component ICCMP_IBASE is being called from the Ibase component plugs.
ii) The method IP_DEFAULT (which is empty) in component ZCOMP is being called as well.
But, I still cannot see the view!
Please let me know what I am missing here.
Thanks in advance.
Regards
Vicky

Hi,
it is hard to analyse this remote with no access to the system.
I suppose the new component you created is working --> You tested it stand alone?
As the inbound plug of your view is called the component setup is most probably correct. The navigation is working. There are two things I might suspect a problem:
1. The viewset in the ICCMP_BPIDENT is not set up correctly. Check the HTML and runtime repository again
2. During view creation something goes wrong. Thus the view is not created.
Perhaps you can create a blank view in your Z component and just put some html code
<h1>Hello World</h1>
on it. Now put this in the window of your Z component as default in the runtime repository.
cheers Carsten

Can we assign account for anonymous user

Hi,
Is this possible to assign account for the anonymous user using idoc script or by any rule concept.??
Thanks,
Abhijit

There is no straightforward out of the box way to do this.
Accounts are instrinsically linked directly to a user and not a role. There is a DefaultNetworkAccounts config variable but this only applies to users who have logged in.
Two options are
1) a Java filter on 'alterUserCredentials' there is an example of this in the HowToComponents SecurityFilter
2) User Credential Mapping (Not used this on 11g)
Go to Administration > Credential Maps
Create a new map with a Map Identifier of myMap
Add the following lines to the map
|#all|, %%
@|#all|, @%%
guest, @your_account(R)
Add the following to config.cfg and restart
ExternalCredentialsMap=myMap
This should pull through all other existing roles/accounts and for guests it should give them R permissions to your_account
Not tested it but from memory this should work
Enjoy
Tim

Builder role see only own app?

Can i have a confirm that if i have more Builder Role accounts every account see only the app that that have created (and not all app)?
Only Admin and DPS master licence account see all app! Confirm?
Really thanks!

I Neil, yes i understand but what is the benefit to have 1 or more builder account if i can see all.
Here we have client with more library linked to some client but we can not send builder account: the customers would see applications created for other clients, and this makes no sense! We would like a simple management: a builder account per customer.
How to do this setup?

How can I set up an email user as "send-only" (no mailbox for receiving)?

Can anyone tell me how I can set up an email account that can send emails but not receive emails.
Our Web application has been using a generic email address "[email protected]" in all of our PHP Web applications as the sending email account. I have this user set up in WORKGROUP ADMIN as a proper account. However the account gets tons of SPAM emails and is constantly filling up.
Also, all of the email accounts require SMTP authentication to send emails.
Is there any way to identify an account as a send only account so we can generate emails from our Web applications that cannot be replied to?
Thanks for the help
-- Jon

Doing so will cause issues. If you send out mail which to an outside server appears to be non existent, mail may be rejected and you may even be blacklisted.
You can remove the account from WGM and add a role account as an alias send to /dev/null. This will look to the outside world like an existing address, but simply be discarded on your system. You should however include a working address in your mailings for people to be able to respond.
Assuming you use local domains, edit /etc/postfix/aliases and add:
noreply: /dev/null
(you can change noreply with the sender used in your PHP apps, but I'd probably change the PHP apps to use noreply as this signals to people receiving your mails that this address is unattended).
When done, issue:
sudo postalias /etc/postfix/aliases
sudo newaliases
sudo postfix reload
HTH,
Alex

How to get values from Hash Table

Hi all,
I have a hash table "lovResults" craeted with following code -
String lovInputSourceId = pageContext.getParameter(SOURCE_PARAM);
Hashtable lovResults = pageContext.getLovResultsFromSession(lovInputSourceId);
values which I can see through SOP are - ******Value of lovResults is{roleid=1000, domainFV=CREATIVE, Role=Account Director}
How can I get the domain value "domainFV=CREATIVE" from hash table in a variable because I have to set this vaue in another field.
Please help me ASAP
Thanks
Amit

Hi Amit ,
Since you are successfully printing the values using sop's , please try this code
Capture the value in controller .
if(oapagecontext.getParameter("domainFV") != null)
String formvalue= oapagecontext.getParameter("domainFV") // ensure hashtable id is correct
Keerthi
Edited by: keerthioaf on Nov 26, 2012 8:46 PM

Adding a Field in search Criteria in Web UI

Hello All ,
I am working on SAP CRM 7.0 Webui Marketing module (Business Role : Marketingpro) . Here when I select the "Account&Product" Work Center and go to search Contact . Here we will move to the Search Contact View here we will get a list box where we can select any search criteria to search a Contanct . Here in this List box in need to add a new Field Called "Archiving Flag" . The component of the Search Contact is :: "BP_CONT_SEARCH" And the View is "BP_CONT_SEARCH/Search " Here in the View Structure Tab under Context->Context Node ->Search i just needd to a new Field called "Archiving Flag" in this context node "Search". Can any Tell me the procedure to add a field to the lsit box of Search Criteria.
Thanks in Advace
Regards,
Kiran Posanapalli.

Hi Vinutha,
U can add fields in the search view using AET in one way.
The other way is identify the component for that search.Press F2 on the web ui screen of ur account search page and see the component name as well the view name for the search fields.
Go to that search view in the component identified.
In case of sales pro role, account search component is BP_CONT_SEARCH ,go to the view search and in that if we go to context node search an attribute named 'telephone' is present already.We can add that to visible fields in configuration tab.
If not found under that context node then right click on context node and create a context node.Before that go to genil_model_browser and observe the relation level in which the field(mobile number) we need to add is present and copy the dependent object name.
For example for phone number the dependent object is BuilAdressPhone. Now pass this value in create context node. Make the adjustments in configuration tab.
*Give points if found useful.
Regards
HCL SPARKS

Error while using Remote object

Badri can you please put the code that we are using

The remoting-config.xml code is
<?xml version="1.0" encoding="UTF-8"?>
<service id="remoting-service"
class="flex.messaging.services.RemotingService">
<adapters>
<adapter-definition id="java-object"
class="flex.messaging.services.remoting.adapters.JavaAdapter"
default="true"/>
</adapters>
<default-channels>
<channel ref="my-amf"/>
</default-channels>
<destination id="GISDBChart">
<properties>
<source>com.ge.gis.reports.GISDBChart</source>
<scope>application<scope>
</properties>
</destination>
<destination id="GISDBReport">
<properties>
<source>com.ge.gis.reports.GISDBReport</source>
<scope>application<scope>
</properties>
</destination>
</service>
The service-config.xml code is
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
<services>
<service-include file-path="remoting-config.xml" />
</services>
<security>
<login-command
class="flex.messaging.security.TomcatLoginCommand"
server="Tomcat"/>
<security-constraint id="basic-read-access">
<auth-method>Basic</auth-method>
<roles>
<role>guests</role>
<role>accountants</role>
<role>employees</role>
<role>managers</role>
</roles>
</security-constraint>
</security>
<channels>
<channel-definition id="my-amf"
class="mx.messaging.channels.AMFChannel">
<endpoint url="
http://{server.name}:{server.port}/{context.root}/messagebroker/amf"
class="flex.messaging.endpoints.AMFEndpoint"/>
<properties>
<polling-enabled>false</polling-enabled>
</properties>
</channel-definition>
<channel-definition id="my-secure-amf"
class="mx.messaging.channels.SecureAMFChannel">
<endpoint
url="https://{server.name}:{server.port}/{context.root}/messagebroker/amfsecure"
class="flex.messaging.endpoints.SecureAMFEndpoint"/>
<properties>

<add-no-cache-headers>false</add-no-cache-headers>
</properties>
</channel-definition>
<channel-definition id="my-polling-amf"
class="mx.messaging.channels.AMFChannel">
<endpoint url="
http://{server.name}:{server.port}/{context.root}/messagebroker/amfpolling"
class="flex.messaging.endpoints.AMFEndpoint"/>
<properties>
<polling-enabled>true</polling-enabled>
<polling-interval-seconds>8</polling-interval-seconds>
</properties>
</channel-definition>
</channels>
<logging>
<target class="flex.messaging.log.ConsoleTarget"
level="Error">
<properties>
<prefix>[Flex] </prefix>
<includeDate>false</includeDate>
<includeTime>false</includeTime>
<includeLevel>false</includeLevel>
<includeCategory>false</includeCategory>
</properties>
<filters>
<pattern>Endpoint.*</pattern>
<pattern>Service.*</pattern>
<pattern>Configuration</pattern>
</filters>
</target>
</logging>
<system>
<redeploy>
<enabled>true</enabled>
<watch-interval>20</watch-interval>
<watch-file>{context.root}/WEB-INF/flex/services-config.xml</watch-file>
<touch-file>{context.root}/WEB-INF/web.xml</touch-file>
</redeploy>
</system>
</services-config>
The Error is
getFaultHandler: [FaultEvent fault=[RPC Fault
faultString="Send failed" faultCode="Client.Error.MessageSend"
faultDetail="Channel.Connect.Failed error
NetConnection.Call.Failed: HTTP: Status 503: url: '
http://alpigedv4275.corporate.ge.com/portal/messagebroker/amf'"
messageId="06F0E133-07D6-FBCE-037C-DD26A718AE9D" type="fault"
bubbles=false cancelable=true eventPhase=2]
Please Guide me with this problem.... Its Urgentttttt

SCOM Gateway Server Upgrade from 2012 SP1 to R2

Hi,
I am upgrading our SCOM environment from 2012 SP1 to R2. But unable to upgrade the Gateway Server. The installation of R2 setup stops with error message: "The operation manager gateway can't be installed on a computer on which the Operation Manager
management server, Operations Console, operational database, web console, agent, System Center Essentials, or System Center Service Manager is already installed."
I checked none of the above component is installed on the gateway server. Please suggest what is the issue?
Regards,
Daya Ram

Hi,
Have you followed the steps below to upgrade a gateway server:
Log on to a computer that hosts the gateway server with an Operations Manager Administrators role account for your Operations Manager management group.
On the Operations Manager media, run Setup.exe.
In the Optional Installations area, click Gateway management server.
On the Welcome to the System Center 2012 R2 Operations Manager Gateway Upgrade Wizard page, click
Next.
On the The wizard is ready to begin gateway upgrade page, click
Upgrade.
On the Completing the System Center 2012 - Operations Manager Gateway Setup wizard page, click
Finish.
You may check below directory:
C:\Program Files\System Center 2012\Operations Manager
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

In iOS 7, how can I easily specify an email address to be used as a FaceTime favorite?

Something seems to have changed for the worse in iOS 7. Under iOS 6, it used to be possible to select various "identifiers" (email, telephone number) to be used for FaceTime for the same person, and these could be labeled differently. In iOS 7, when adding FaceTime favorites, one is given the option of adding the *contact* for FaceTime or FaceTime audio, but it isn't clear how to add a specific identifier for a contact.

Doing so will cause issues. If you send out mail which to an outside server appears to be non existent, mail may be rejected and you may even be blacklisted.
You can remove the account from WGM and add a role account as an alias send to /dev/null. This will look to the outside world like an existing address, but simply be discarded on your system. You should however include a working address in your mailings for people to be able to respond.
Assuming you use local domains, edit /etc/postfix/aliases and add:
noreply: /dev/null
(you can change noreply with the sender used in your PHP apps, but I'd probably change the PHP apps to use noreply as this signals to people receiving your mails that this address is unattended).
When done, issue:
sudo postalias /etc/postfix/aliases
sudo newaliases
sudo postfix reload
HTH,
Alex

How to create customer in crm sales with crm 7.0

hi,
can anyone tell me how to create a customer?
i am new to crm. I am learning crm sales
Thanking you
prasad

Hi,
As explained before, go to SALESPRO, SalesPro and SPRO are different.
SALESPRO is a role in UI..make sure that it is added for your login.
go to transaction crm_ui -> SALESPRO business role ->Account Managemnt in the navigation bar -> Accounts -> Corporate Accounts.
Hope this helps!!
Prerna

BP ROLE ACCOUNT _ CRMACC

Similar Messages

Maybe you are looking for