BPC 5.0 and Excel SP3

Hello,
We are facing problems since we upgraded our excel from SP2 to SP3. Everytime we select new data from our dimension it deletes the rows from report and it is screwing up all our reports.
We have one system which has excel SP2 and it is working fine.
We did try unistalling SP3 and reinstalling SP2 but it is not working.
If anyone has seen this earlier, please advise.
Thank you,
Anjali

Hi,
Your problem is not related to upgrade.
I think you have an issue with one dimension or you have issue regarding the reports.
If you are using a simple EVDRE do you have any problem?
If not then you have to review your reports because in that case the problem is there.
Regards
Sorin Radulescu

Similar Messages

BO XI 3.1 SP3 and Excel 2010

Hi There
My BO is BO XI 3.1 SP3, and excel is 2010, my webi report has over 65523 rows, but I found in the excel, it will split into two tabs, it does not use excel 2010 feature
does any one know the reason?
thanks

Excel 2010 is not suportive by BO XI 3.. It is possible in BO XI 4.0. You can try What Gowtam Allu said, but I am not sure if it works.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4079f8f6-2b49-2d10-d790-bc596012dc25?quicklink=index&overridelayout=true

BPC 7 : Excel 2003 and Excel 2007 Conflict

Hi Experts,
I have created a template in BPC 7 MS on my computer which has Excel 2003 version.
But when I try that template on another computer which has Excel 2007. The format (in the format Range) did'nt seem to work or it has diff effect on Excel 2007.
Is there really a conflict between them?? and cannot have different Microsoft Office version?? Or is there An Add-on that we have to Install so that Excel 2003 and Excel 2007 can be used at the same Time??
Thanks,
Bennie Jay

Sorin:
Situation
I also have the same issue with Excel formatting in Excel 2007, and I found a work-around specifically to my issue.
At the format section's CRITERIA, I have one entry: HEADING="New Budget" in the Column direction, apply certain color and number format to the cells of that column. However, I used Excel function CONCATENATE("HEADING=",EVDES("FINANCE",CATEGORY)) to come out with HEADING="New Budget", rather than just typing the string value.
With the above exercise, in Excel 2003 the format would apply no problem, but in Excel 2007, the entire formatting went wild and broke. After I dropped CONCATENATE() and just typed in HEADING="New Budget", the formatting applied OK in 2007.
Data
We are currently on BPC 5.1 SP5
The original report was built in Excel 2003
Question
Is there a setting in Excel that would allow me or bypass the restriction to use Excel functions to come out with CRITERIA definition?

Excel 2007 and Excel 2003 format

Hi all,
we have some problems with Excel file format on BPC 7.5NW SP06:
1- We save input schedules or reports woth Excel 2007 file format. Then when we try to open these report they are corrupted (we click on "Open" and nothing happens). We can download the report from UJFS. The xltx file is corrupted. We can change th file extension to xls. Then we can open the report again.
2- Is it possible to define the default extension when we save input schedules and reports? By default xltx is selected. We want to have xlt selected by default.
thanks for your help,
Romuald

Hello,
First you can try checking if you have configured your apset to work with xltx.
1. Open BPC web admin and select AppSet Parameters
2. Check ALLOW_EXTENSIONS and DEFAULT_EXTENSIONS if you have xltx there
3. If not, add and click on update
If this continues to happen, check note "1579344 - Office 2007 extensions not loading in BPC 7.5 SP6 for NW". This can be a program error, but note that it only happens for some templates.
Hope it helps
Debora

HFM SDK and Excel 2007

Hi there,
is it possible to get HFM SDK working on Excel 2007 for an EPMA application?
I imported the .bas-file of the "ExtendedAnalyticsBatch"-Sample (VB6) in Excel and tried to get this work. But i cant't even import the necessary dll's.
Has anybody an idea to get this work or first of all to import the dll's? Or isn't it possible with this combination of SDK and Excel-Version?
Google doesn't help that much.
Thanks & best regards

Hi,
Please refer to the Note 1240811 - Known issues with BPC and Office 2007.
Hope it helps.
Regards,
Raghu

CR2008 , WebI and Excel 2010

Hi There
I have CR2008 SP1 and Excel 2010, when I tried to export CR report to excel, I got the error and the program will be terminated, if I select "constant column width( in points)", the report can be exported to excel, but if I select the default setting "column width based on the objects in the whole report", it will give me the error
The instruction at "0xff168b1c" referenced memory at "0xff168b1c". The memory could not be "read", click on OK to terminated the program, then second error will show up
The exception unknown software exception (0xc0150010) occured in the application at location 0x7c94487f. Click on Ok to terminated the program...
also I have BO XI 3.1 SP3, when I tried to export my WebI report to excel, it does not use Excel 2010 feature(support over 65536 rows), it will split the report with over 65536 rows into two sheets like with Excel 2003
does anyone know how to fix these two issues?
thanks

Hello,
Excel 2010 is not supported in CR 2008. It is in the next version of CR 2011.
No option to not get sheets for more than 65k rows, limitation of Excel.
Install CR 2008 SP 3, requires an uninstall first. Be sure to have your CR keycode available.
https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip
As for WEBI, post your question to the [WEBI forum|SAP BusinessObjects Web Intelligence;
Thank you
Don

JCOM example and Excel 2003

Following the instructions to get the jsp2com example running with Excel 2003 results in a JSP compilation error.
The generated classes contain an interface declaration for Application, i.e. Application.java contains
package excel;
public interface Application {
but the JSP tries to instantiate it, i.e. line 40 in the JSP reads
excel.Application app = new excel.Application();
Of course this doesn't work. Any ideas what has changed and how I can get this example to run?
Thanks in advance!

Hello,
First you can try checking if you have configured your apset to work with xltx.
1. Open BPC web admin and select AppSet Parameters
2. Check ALLOW_EXTENSIONS and DEFAULT_EXTENSIONS if you have xltx there
3. If not, add and click on update
If this continues to happen, check note "1579344 - Office 2007 extensions not loading in BPC 7.5 SP6 for NW". This can be a program error, but note that it only happens for some templates.
Hope it helps
Debora

5.1 Admin Console and Excel 2007

We previously had Excel 2003 and are in the process of upgrading to 2007. We are getting errors making changes to dimensions in the admin console. Whenever we try to process a dimension, we get an error that says "external table is not in the expected format". Is it possible to set up the 5.1 Admin console to work with Excel 2007?
Thanks,
Blake

Dear Blake Thomas,
Of course, You could use the Ms.Excel 2007 in BPC Admin Console and BPC Excel. One thing you should to know, you should to upgrade your SAP BPC 5.1 with latest SP before. Please you download the latest SP in website SAP marketplace [http://service.sap.com/instguidesEPM-BPC] . If you have upgraded it, you will see the window of confirmation which will ask you use Ms.Excel 2003 or Ms.Excel 2007 for once
Best Regards,
Wandi Sutandi

Use VBA and Excel to open Dreamweaver HTML (CS5), find and replace text, save and close

I wish to use VBA and Excel to programmatically open numbered Dreamweaver HTML (CS5) and find and replace text in the code view of these files, save and close them.
I have 5000 associations between Find: x0001 and Replace: y0001 in an Excel sheet.
I have the VBA written but do not know how to open, close and save the code view of the ####.html files. Please ... and thank you...
[email protected]

This is actually the code view of file ####.html that I wish to find and replace programmatically where #### is a four digit number cataloguing each painting.... In 1995 I thought this was clever... maybe not so clever now :>)) Thank you for whatever you can do Rob!
!####.jpg!
h2. "Name####"
Oils on acrylic foundation commercial canvas - . xx X xx (inches) Started
Back of the Painting In Progress </p> </body> </html>
Warmest regards,
Phil the Forecaster, http://philtheforecaster.blogspot.ca/ and http://phils-market.blogspot.ca/

How do I make Word and Excel Documents readable to PC users that cannot open them

How do I make Word and Excel Documents readable to PC users that cannot open them

Be sure to save them in the Office 2007 format as .doc or .xls files.

REPORT GENERATION TOOLKIT AND EXCEL

i have a problem with report generation toolkit and excel
the problem is:
i must read & write from a excel worksheet when this is open but when i using the report generation the worksheet is open another time
have some solution for this problem?
sorry for my english

You need to close Exel when before your VI is running. Excel can not have two instances running at the same time.
Joe

Adobe photoshop,word, and excel won't open on my 2010 air mac

adobe photoshop,word, and excel won't open on my 2010 air mac. Message says I have lost my power pc connection. this happened while in Mexico

Adobe Photoshop CS2, MS Word 2004 and other PPC apps running in Snow Leopard Server installed into Parallels for use in Lion or Mt. Lion:
[click on image to enlarge]
More information here:
http://forums.macrumors.com/showthread.php?t=1365439

My microsoft word and excel programs won't work and files won't open.

After an automatic HP update, my Microsoft Word and Excel programs won't work and my files won't open. What caused this and what can I do to fix the problem without losing my files? I have files that are part of my work and I HAVE to have them ASAP. Please help.
Thanks in advance.

Hi
Please find the steps to resolve your issue.
Open Installed Updates by clicking the Start button , clicking Control Panel, clicking Programs, and then, under Programs and Features, clicking View installed updates.
Click the update that you want to remove, and then click Uninstall. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Or Try this step
If this does not resolve your issue then you can try a System restore to the date where unit was working fine steps provided below for you.
Start in search box type System Restore then click on it then select the Date where unit was working fine.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

How do I get windows and excel on my iPad

I want to use my iPad 2 for my business but need word and excel....how do I do this?

There is no Word or Excel for iPad or any other iOS device, but you can use other Apps to edit these files.
http://www.zdnet.com/blog/mobile-gadgeteer/ipad-office-app-showdown-four-apps-to -help-you-get-work-done/3445

The dock in Maverick is doing strange things to word and excel files

For years (and Mac operating systems), I have kept Microsoft word and excel documents on my doc. I use these documents frequently...click on the file icon in the dock, it opens, I edit and save. Click on the icon again and the saved document opens. so simple.
Since upgrading, I click on the icon, the file opens with a number following the file name (version number I assume) but before docx or xlsx. I edit and save, but get a "save as" box. Now I have to edit the file's name, find the original and replace the original with the new version. Not so simple.
Since I open and close my daily billing log many times a day, this has slowed me down (and irritated me).
I have had no other problems with my Maverick installation and these files are in Word and Excel 2008. This does not happen to powerpoint or any other file I tried so far.
Any suggestions on how to solve this?

Your Mac will generate a new .plist file automatically after restart.
Deleting the .plist file shouldn't delete any app icons from the dock.
Check the startup disk just in case.
Launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If DU reports errors, restart your Mac while holding down the Command + R keys.
From there you can access the built-in utilities to repair the disk using OS X Recovery

BPC 5.0 and Excel SP3

Similar Messages

Maybe you are looking for