CR2008 , WebI and Excel 2010

Hi There
I have CR2008 SP1 and Excel 2010, when I tried to export CR report to excel, I got the error and the program will be terminated, if I select "constant column width( in points)", the report can be exported to excel, but if I select the default setting "column width based on the objects in the whole report", it will give me the error
The instruction at "0xff168b1c" referenced memory at "0xff168b1c". The memory could not be "read", click on OK to terminated the program, then second error will show up
The exception unknown software exception (0xc0150010) occured in the application at location 0x7c94487f. Click on Ok to terminated the program...
also I have BO XI 3.1 SP3, when I tried to export my WebI report to excel, it does not use Excel 2010 feature(support over 65536 rows), it will split the report with over 65536 rows into two sheets like with Excel 2003
does anyone know how to fix these two issues?
thanks

Hello,
Excel 2010 is not supported in CR 2008. It is in the next version of CR 2011.
No option to not get sheets for more than 65k rows, limitation of Excel.
Install CR 2008 SP 3, requires an uninstall first. Be sure to have your CR keycode available.
https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip
As for WEBI, post your question to the [WEBI forum|SAP BusinessObjects Web Intelligence;
Thank you
Don

Similar Messages

Essbase Add-in and Excel 2010

Hi All,
I have a user who has just had Windows 7 and excel 2010 installed and is able to connect to Essbase through the add-in but when he tries to retrieve data it completely crashes his excel which shuts down immediately.
As far as I have read the add-in does not support 2010 64-bit but I have win7 and excel 2010 and do not have the same problem and I am to retrieve data with no issues. We both have the 32-bit version of 2010 so I'm not sure why his excel is shutting down.
We are on 11.1.1.3 of Essbase
Any pointers or experiences you can give are appreciated
Thanks
Luke

Is there any other addin installed on this machine, if yes try the retrieval after disabling that addin.
If not
Try un-install and re-install of Essbase Excel Addin

Performance issues when using Smart View and Excel 2010

Hello, we are experiencing very slow retrieval times when using Smart View and Excel 2010. Currently on v.11.1.3.00 and moved over from Excel 2003 in the last quarter. The same spreadsheets in 2010 (recreated) are running much slower than they used to in 2003 and I was wondering if anyone else out there has experienced similar problems?
It looks like there is some background caching going on as when you copy and paste the contents into a new file and retrieve it is better.....initially. The size of the files are generally less than 2mb and there aren't an expecially large number of subcubes requested so I am at a loss to explain or alleviate the issues.
Any advice / tips on how to optimise the performance would be greatly appreciated.
Thanks,
Nick

Hi Nick,
Office 2010 (32 bit) only is supported.
Also check these documents:
Refresh in Smart View 11.1.2.1 is Slow with MS Office 2010. (Doc ID 1362557.1)
Smart View Refresh Returns Zeros (Doc ID 758892.1)
Internet Explorer (IE7, IE8 and IE9) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
Thank you,
Charles Babu J
Edited by: CJX on Nov 15, 2011 12:21 PM

BO XI 3.1 SP3 and Excel 2010

Hi There
My BO is BO XI 3.1 SP3, and excel is 2010, my webi report has over 65523 rows, but I found in the excel, it will split into two tabs, it does not use excel 2010 feature
does any one know the reason?
thanks

Excel 2010 is not suportive by BO XI 3.. It is possible in BO XI 4.0. You can try What Gowtam Allu said, but I am not sure if it works.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4079f8f6-2b49-2d10-d790-bc596012dc25?quicklink=index&overridelayout=true

Unable to save MS Word and Excel 2010 and 2013 onto the network share

Hi,
I have read similar cases, but did not work out on the problems we face.
We are using Office 2010 and Windows 7 and it seems like only this combination will encounter saving problem on the networe share (but local / removable disks are fine) -
Other combinations:
Windows XP and Office 2010 - no problem
Windows XP and Office 2003 - no problem
Windows 7 and Office 2003 - no problem
In Microsoft Word 2010, when saving a new document, it will save but create a 0KB file in the network share drive and I notice the blue menu bar of the Microsoft Word 2010 still displays "Document1" instead the new file name.
And only when I click save icon or exit button, Word actually prompts another "Save As" dialog to save the file, and as a result, I have to save the same file and answer MS Word prompt to replace the existing file - and this is the real time that
the document and its contents really got saved. And the blue menu bar then displays the actual file name.
In Microsoft Excel 2010 (also Powerpoint I suppose so), in saving a new excel file, after typing in a file name for the new file in the network share location, it will prompt a dialog box indicating the "File is currently in use"
Similar to MS Word, it will still create a 0KB file in the network share, and only a second time saving and replace the 0KB file, is able to save the file again.
I have tried a lot of ways from Safe Mode, Disable Add-in, Added Trusted Locations to the network share in MS Word and Excel, Uninstall Antivirus software, redo NTFS permission on the network share server folder, etc but the problem cannot
be solved.
Any help is appreciated. Thank you in advance.
Kind regards,
Daryl

Thank you Max.
I have tried various storage configurations and share the folders out in Windows Servers and grant user accesses with AD.
These drives configuration involves iSCSI drives, using NAS drive, using internal SAS RAID drives in Windows 2008 servers, all having the same errors, but the latter one was having the most errors almost every first time the users
save their files (includes saving from email attachments), the files will get 0KB.
I have tested LAN cables, switch LAN points in panels and switches, and comes to no avail.
I have patched with the latest office updates (the latest being Office 2010 SP2) also to no avail.

Problem with solver DLL load and Excel 2010

Since upgrading from Office 2007 to Office 2010 we've started to experience a problem with the solver addin when our own analytics addins is also loaded. I have found a solution, but I think it may highlight a problem with the latest version of the solver
addin for Excel 2010.
Firstly, to describe the problem - the solver addin seems to load normally when Excel 2010 starts up, however when a "Solve" is performed we are seeing a "File not found: Solver32.dll" error at the final "Keep Solver Solution" stage. This only happens our
own analytics addin is loaded. We've been careful to make sure that our own addin does not change the working directory and also that it has been built against the correct Excel 2010 SDK libraries. We do not see this error with any other versions of Excel
running on the same PC or any other environment.
After some searching we found other people were having similar problems and after a bit more probing I found a solution that works - but that I'm not very happy with.
If I copy the Solver32.dll from:
C:\Program Files (x86)\Microsoft Office\Office14\Library\SOLVER
(where it was installed)
into :
C:\Windows\SysWOW64
(where Windows 7 keeps its 32 bit system DLLs)
then the problem goes away.
This seems to indicate that somehow Office 2010 has a problem that causes it to search in the wrong folder for the Solver32.dll when another addin is loaded in between the original Solver32.XLAM at start up and the use of the Solver in the sheet (which eventually
requires this DLL to be loaded). Oddly, this only happens after a solution is found and "Keep Solver Solution" is selected - and I'm not sure why it's not looking for Solver32.dll any earlier.
This is not a problem with any earlier versions of Excel and I suspect is a bug in the Office14/LIBRARY/SOLVER implementation. Is there any way to get this followed up?
Thanks,
Andy

I'm facing the same issue. With an Excel VSTO add-in we're building. When the add-in is enabled the assembly solver32.dll can't be found. With our add-in disabled the DLL is resolved as (Sysinternals Process Monitor trace):
EXCEL.EXE CreateFile
C:\Program Files (x86)\Microsoft Office\Office14\Solver32.dll
EXCEL.EXE CreateFile
C:\Windows\SysWOW64\Solver32.dll
EXCEL.EXE CreateFile
C:\Windows\system\Solver32.dll
EXCEL.EXE CreateFile
C:\Windows\Solver32.dll
EXCEL.EXE CreateFile
C:\Program Files (x86)\Microsoft Office\Office14\Library\SOLVER\SOLVER32.DLL
and with our add-in enabled the following locations are tried, but solver32.dll won't be found:
excel.exe CreateFile
C:\Program Files (x86)\Microsoft Office\Office14\Solver32.dll
excel.exe CreateFile
C:\ArcGIS\______path to our add-in install location_____________\Solver32.dll
excel.exe CreateFile
C:\Windows\SysWOW64\Solver32.dll
excel.exe CreateFile
C:\Windows\system\Solver32.dll
excel.exe CreateFile
C:\Windows\Solver32.dll
excel.exe CreateFile
C:\Program Files\Common Files\Microsoft Shared\Windows Live\Solver32.dll
excel.exe CreateFile
C:\Program Files (x86)\Common Files\microsoft shared\Windows Live\Solver32.dll
excel.exe CreateFile
C:\Windows\SysWOW64\Solver32.dll
excel.exe CreateFile
C:\Windows\Solver32.dll
excel.exe CreateFile
C:\Windows\SysWOW64\wbem\Solver32.dll
etc...

Information of Print Area is missing in VB6 Addin of version Excel 2007 and Excel 2010

Hallo,
I have a problem with my old VB 6 COM Addin. My document has Print Area, but when I use my addin to open this document. The information of print area is lost.
This problem takes place only in the following situations.
If the PrintArea is set in Excel 2007 and 2010, it will be missing. But in Excel 2003 without problem.
From the code, the ".ActiveSheet.PageSetup.printArea" is always empty, although when the print area is configurate in Excel 2007 and 2010
What is the possible reason of this problem?
Thanks very much.

There are several things I don't follow in the details you gave
"I click an excel document in the third-part program and Excel 2007 will be open automatically"
- Describe the 3rd party program you open the workbook in if not Excel"
- What do you mean by "click and Excel document", what do you click and where is the document
- Why click on an Excel document (workbook, worksheet something else?) to get a 3rd party app to automate Excel, then does some other workbook load?
It's very confusing!
Did you try the code in VBA in the instance of the workbook whose sheet you want to return the Print Area
Re: Excel Object Library is 9.0
Did you set a reference to XL-9 in the test app with my code then transfer to a different system with 2007?
However, a ref to xl-9 shouldn't be a problem if the code compiled with that ref. If the app/dll is transferred to a different system it will pick up the Excel GUID in that system, which is exactly the same for all versions since Excel97. The only time it
would be an issue is if code compiled with a new object model is not supported when used with an older Excel object model.
The fact my code appears to work without error returning the message "Print Area not defined" suggests it is referring to a different workbook, ie one in which the Print-Area has not been defined. Double check which workbook it is referring to,
eg
Private Sub cbPrintArea_Click(ByVal Ctrl As Office.CommandBarButton, _
CancelDefault As Boolean)
Dim ws As Excel.Worksheet
Dim s As String, s2 As String
On Error Resume Next
s = xlApp.Caption
If Err.Number Then
MsgBox "xlApp error " & vbCr & Err.Description
Exit Sub
End If
Set ws = xlApp.ActiveSheet
s2 = ws.Parent.Name & vbCr & _
ws.Name & vbCr & _
ws.Range("A1").Value & vbCr
If Err.Number > 0 Then
MsgBox "failed to reference ActiveSheet"
Else
s = ws.PageSetup.PrintArea
If Err.Number Then
MsgBox Err.Description
Else
If Len(s) = 0 Then s = "Print Area not defined"
MsgBox s2 & vbCr & s
End If
End If
End Sub
This should confirm the workbook name, activesheet name and value in A1 (before running maybe add the current time in A1 with ctrl-shift-; in the same workbook as the print-area has been defined)
Peter Thornton

Taskbar Jumplist anomalies for Word 2010 and Excel 2010

I am having problems with missing jumplists for Office 2010 products (Word and Excel) pinned on the Windows 7 taskbar, **BUT** have no problems with jumplists for Notepad and IE pinned on the taskbar.
Observation 1: I just upgraded from Office 2010 Starter to full Office 2010 by getting a product key. Full Office 2010 was installed on my laptop when I purchased it but only Starter was licensed. Full Office 2010 was unusable until the upgrade. I suspect
the leapfrog from Starter to full Office 2010 might have a part in this jumplist issue.
Observation 2: I can see from a DOS prompt that the AutomaticDestinations and CustomDestinations folders exist under Recent. However, from Windows Explorer I cannot see the 2 folders under Recent. (That may be a clue…if other people CAN see the 2 folders
from Windows Explorer.)
Observation 3: In DOS, I can see that both directories have files ending in -ms. I can also see updates (new files with fresh timestamps) from opening Word and Excel files in those 2 directories. It’s almost like Word and Excel don’t understand to go look
in those 2 directories after the Office upgrade, even though Windows 7 (?) generates the -ms files for the jumplist function.
Observation 4: Again, no problems with Notepad and IE jumplists. I can remove the files from the AutomaticDestinations folder and cause Notepad to have no jumplist items, and then restore them and Notepad has jumplist contents again.
Observation 5: I had no problem using jumplists with Word Starter and Excel Starter. All references to Office/Word/Excel Starter are now gone from the Starter button and All Programs - sent to Recycle bin. I deleted the Word Starter
and Excel Starter entries when I upgraded, but I just deleted the Microsoft Office Starter (Englisgh) entry under All Programs today...I thought it was a benign entry and wouldn't hurt since I wasn't using it. Maybe there's some corruption in registry
as a result of the mixture. Interestingly, I can drag a file created in Word Starter to the taskbar and it will try to pin it to the Word Starter taskbar "ghost" that's in the Recycle bin.
Any clues anyone? I have no large files in the two destination folders, and have only about 20 files total in each folder...far fewer than the 999 threshhold mentioned in one of the updates for Office 2010.
Thank you!

I encountered exactly the same problem, and under exactly the same circumstances as the original poster (upgraded from Office Starter to Home and Business; jump lists worked fine in Starter, then stopped working for Excel and Word after upgrading).
Like the original poster, none of the various fixes found online corrected the problem, nor did re-installing Office.
I also tried what was suggested by Max Meng and created a new User Account. The problem occurred for the new account, just as it did with the old one.
After about 6 hours of fighting, I have finally solved the problem. The solution is not easy, fast or pretty.
What I did was uninstall Office (again) using the Control Panel. Then I ran a FixIt utility found here:
http://support.microsoft.com/kb/290301 (method 2)
My hope was that this would do additional registry clean-up. I knew from earlier attempts that this alone would not fix the problem, though.
Despite uninstalling twice, there were still a lot of references left in the registry to "Word Starter" and "Excel Starter". Likewise, there were still references to "WINWORDC.EXE" and "EXCELC.EXE", which are the starter versions of the executables.
So I went through the registry using RegEdit, and manually deleted every key which included those strings. The largest number of cases were file type definitions for various Word and Excel file extensions. When in doubt, I deleted entire tag
hierarchies for Word and Office file types, figuring that they would be restored when I reinstalled Office. In the process, I removed pretty much every reference to Word or Excel that I could find in the registry.
I also deleted any directory on my hard drive (in c:\Program Files(x86), c:\Program Data, and c:\Users\<name>\AppData which appeared to be related to Office.
Having done this, I reinstalled again, and the jump lists for Word and Excel now work.
In debugging the problem, I found that .automaticDestination-ms files (which contain the data behind the jump lists) were not being created when I opened Word or Excel documents; they *were* being created when I manually pinned individual files to the
taskbar, however.
I suspect that this might be due to the long hexadecimal filename being based on a hash of the application name, or what the system thinks is the application name based on the file type. Removing the references to "Word Starter" and "Excel Starter",
and the corresponding WINWORDC.EXE and EXCELC.EXE in the registry might have cleared up this problem.
Obviously this fix is potentially risky, and should only be attempted if you are comfortable editing the registry. Making a full system backup beforehand would be a wise precaution. For this specific case, however (broken jump lists after
upgrading from Starter to full Office) it would appear the only alternative is a clean install of Windows (to wipe the registry completely).

Outlook,Word and Excel 2010 slow on first open

I have a 3x users on my Lan with these issues. Windows 7 Pro (32bit) and Office 2010 (32bit) Quadcore 2.6Ghz 2GB Memory Exchange 2003 Cached/non-Cached mode Roaming Profiles When attachments (doc,docx,rtf,pdf,xls,xlsx) are opened from Outlook,Outlook tries
to open document, and displays orange loading line in the middle of screen. After about +30sec the document opens up, if you reopen document again immediately after opening the first time, its instantly open. Excel and Word files does not always open on first
attempt from PC or LAN, but does on second attempt. When opening files from within Word/Excel directly, it seems to be instant. Excel files sometimes open with this error "There was a problem sending command to the programme " then opens blank Excel2010. Things
we have tried: - Repair Office 2010 , no change - Uninstall restart and reinstall Office 2010 , no change - Install SP1 for Office 2010, no change - Swapped Workstation on 1 user, no change - Clear Outlook Cache - Start Outlook as Safemode - Disable DDE -
Moved/Renamed Roaming Profile folder on server, then had workstation recreate Profile I have had no luck

Hi
When you open attachment in Outlook, it will leave a copy to subdirectory under the “Temporary Internet Files” directory, you can empty
the subdirectory and restart outlook.
1.
Click Start, click All Programs, click Accessories, and then click Run.
2.
In the Run dialog box, type the following command (including the quotation marks), and then click OK.
"C:\Users\ username \AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.Outlook"
3.
Open the subfolder under the Content.Outlook folder whose folder name is a randomly generated sequence of letters and numbers. For example, FW0B6RID.
Note There may be more than one subfolder with a randomly generated
name under the Content.Outlook folder.
You need check following registry key make sure the value exists, and if the value contains a valid path
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
or
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Security
Value Name: OutlookSecureTempFolder
Data Type: REG_SZ
Best regards
William Zhou CHN
TechNet Community Support

Word and Excel 2010 keep asking me to log into SharePoint.

I had Office 2010 beta running on Windows 7. At one point, I opened a file from a SharePoint site by mistake. I got the Beta to stop asking me about logging
into this SharePoint site.
Last week, I un-installed the beta and installed the released version of Office 2010.
Now, when I have any documents opened in either Word or Excel, I am being asked to log into the old SharePoint site - every 5 minutes.
The only place I have been able to find anything related to SharePoint is under Outlook, file, info, account settings. The old site was listed under SharePoint
lists - I deleted that. There was also a Data File that had the SharePoint site as the location - I deleted that.
Word and Excel are still asking me to authenticate to the SharePoint site - I don't use any SharePoint sites.
HOW DO I MAKE IT STOP?
Thanks!

Hi,
Thank you for using
Office 2010 Setup and Deployment forum.
From your description, I understand that you had Office 2010 beta and opened a file from a
SharePoint site by mistake. Then you set Office 2010 beta stop asking for log in in this SharePoint site. Now you installed the RTM version of Office 2010. However, when you open any documents in Word or Excel, you are asked to log in the old SharePoint site.
If there is any misunderstanding, please feel free to let me know.
If SharePoint Shared Workspace is enabled in Word or Excel, this may prompt users with a Windows login if users do not have permissions to access or create a Shared
Workspace. We can do the following steps to turn this off:
===============
1.
Open
Word
2.
Click
Files > Options > Advanced
3.
Under
General, click Service Option.
4.
Click
Shared Workspace.
5.
Uncheck box that says
“The document is part of a Workspace or SharePoint Site.”
6.
Click
OK to save the settings.
Similar steps to do this in Excel.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for
you, please feel free to let me know.
Best Regards,
Sally Tang

LiveOffice and Excel 2010

Hi.
I've just installed BO EDGE 3.1 on my laptop running Excel 2010, but when I try to install LiveOffice I get an error message saying:
"Microsoft Office XP and later applications: Excel, Word, Outlook or PowerPoint must be pre-installed."
...and the installation is cancelled.
Does anyone of you know how to fix this?
Is there a service pack that I need to install?
Or do I have to edit the Liveoffice.msi-file with instedit (as with Xcelsius 2008)...and how if so?
I hope to avoid installing Excel 2007, then LiveOffice and then uninstall Excel2007 as I don't have 2007 available...
Any help will be greatly appreciated.
Cheers, IngA

Inga,
Based on the latest platforms document (as of servicepack 3), Office 2010 is not yet supported for Liveoffice - hence you get this issue.
your best bet is to downgrade office to a supported version as below -
- Microsoft Office 2007 SP1
- Microsoft Office 2007 SP2 Compatible Support* with respect to Microsoft Office 2007 SP1
regards,
Shiva

Cannot view Master Data Services Models with Excel Add-In, using MSSQServer 2014 Trial and Excel 2010 (non-trial)

I'm using using MSSQServer 2014 Trial with Master Data Services installed. I have connected to the MDS server with the Excel 2010 MDS Add-In.
Models are not listed in the Add-In's Explorer browser. When I open the MDS server with IE, no models are listed either.
I can view them locally on the server in IE.
There are no remote DB access issues.
Is it just that the 2014 Trial version does not supply this info remotely??

Was a Model Permission issue. Fixed here: http://technet.microsoft.com/en-us/library/ff487055.aspx
Would be good if the interface would show some kind of alert to that fact.

Hyperion Retrieve v. 3.5.1 and Excel 2010

Can anyone confirm that you can use the old Retrieve v 3.5.1 with Excel 2010?
Is there a cross-reference which shows which version of Hyperion work with various versions of Excel?
Yes, I know that the 3.5.1 is no longer supported.
Thanks.

Yeah, try reading through some of the existing threads.
Like http://forum.java.sun.com/thread.jsp?forum=14&thread=444281&tstart=15&trange=15

LabVIEW 2011, and Excel 2010: saving problems

Hello to all! I am a student of Mechanical Engineeringfthat very little has been using this software. I present the problem: for a matter which is called Biomechanics, I and my colleagues, we have developed the design of a rheometer, which is controlled by LabVIEW2011. Since we are still at the experimental stage, always has been simulated using labview: the whole experience. So, labview, at present, not only controls the stepper motor through the frequency sets, but also simulates the output (in the specific, the response to the torsion of the cartilage, simulated with a low pass filter of the second order). All this was done by my colleague more experienced than me, who today passed me the finished project that in his pc works perfectly while not in mine (we have the same version of labview, but different version of office). In practice, the program is fine (there is no arrow "Run" broken) and the simulation with the creation of the sine graph (response of the cartilage) is done perfectly. My colleague then set labview in order to save the data to an excel sheet at the end of the simulation, asking the user where to put it (the excel file must already exist, labview does not create it). The excel file should contain two columns and a scatter plot (one column represents the frequency, f, of the stepper motor, the second represent the shear modulus G, which increases as the frequency increases and the graph represent the trend of G in function of f). As soon as I decide to save the data, excel opens, for an instant appear the scatter plot and data in columns but immediately after the graph disappears and remain only the columns with data (so I have to make the graph "manually") and labview gives me the following error:
Error -2147023170 occurred at Property Node (arg 2) in NI_ReportGenerationToolkit.lvlib:Excel_Insert_Char
t.vi->NI_Excel.lvclass:Excel Insert Graph.vi->NI_ReportGenerationToolkit.lvlib:Excel Easy Graph.vi->SaveExcelFile.vi->Progetto 2.0.vi
This error code is undefined. Undefined errors might occur for a number of reasons. For example, no one has provided a description for the code, or you might have wired a number that is not an error code to the error code input.
Additionally, undefined error codes might occur because the error relates to a third-party object, such as the operating system or ActiveX. For these third-party errors, you might be able to obtain a description of the error by searching the Web for the error code (-2147023170) or for its hexadecimal representation (0x800706BE).
What can I do?
Thanks. Regards
Solved!
Go to Solution.

The LabVIEW Report Generator in LabVIEW 2010 and more recent versions does, indeed, work very well with Excel in Office 2010. I helped someone about two weeks ago with a problem saving a series of measurements to a (new) Excel Workbook. Your problem differs in two ways -- you want to save in an existing Excel file (why? Aren't you worried about overwriting data, or are you trying to add a new WorkSheet, or append to the end of an existing WorkSheet?) and making a Chart. I've not tried charts, so don't have advice right now.
Judging by your error message, it is the Chart feature that is giving you trouble. Can you see how your code runs if you eliminate the Chart functions? [You can do that by putting a "Diagram Disable" Structure around the Chart code, clicking on the top of the structure and wiring the wires through in the Enable case].
Give that a try and let us know what happens.

Re: Essbase Add-in and Excel 2010

I have a user who is getting the following error:
Excel experienced a serious problem with the 'c:\oracle\middleware\epmsystem11r1\products\exceladdin\bin\essexcin.xll" add-in. . . .Do you want to disable this add-in?
Do we need to reinstall the Essbase add-in ?
I have had the user disable other add-ins via 'File > Options > Add-ins > Excel add-ins and that didn't resolve the problem.
Are there any compatibility issues with 64 bit Excel?
Also, after installing Essbase add-in, what are the items that should appear
'File > Options > Add-ins > Excel add-ins
Excel version : 2010
Add-in version Essbase Spreadsheet add-in, Fusion Edition 11.1.2
I would appreciate a quick response.
My email id is < removed by moderator so that you don't get spammed for all Eternity >

Also, after installing Essbase add-in, what are the items that should appear
'File > Options > Add-ins > Excel add-ins
The user has the following items:
Essexcin.
In2Hyp Essbase ribbon.
Oracle Essbase Query Designer Addin.
The items which I have in 'File > Options > Add-ins > Excel add-ins is:
In2Hyp Essbase Ribbon
Oracle Essbase OLAP Server DLL (Non- Unicode)
Oracle Essbase Query Designer Addin.
Could you please kindly help me understand the difference?
Do you recommend reinstalling the Essbase add-in ?
Thank you very much for your help.

CR2008 , WebI and Excel 2010

Similar Messages

Maybe you are looking for