BPC 7.5 NW - BPF: validation error the CV dimension is management ?

Hi, some know this error in BPF for SAP BPC 7.5 NW ?
BPF: validation error the CV dimension is management
BPF: Error de validación; la dimensión CV CUENTA no es de gestión
BPF: Error de validación; la dimensión CV Category no es de identificación
BPF: Error de validación; la dimensión CV CentroDeCosto no es de gestión
BPF: Error de validación; la dimensión CV Moneda_Ppto no es de gestión
BPF: Error de validación; la dimensión CV PARAMETRO no es de gestión
BPF: Error de validación; la dimensión CV RptCurrency no es de gestión
BPF: Error de validación; la dimensión CV Sociedad no es de gestión
BPF: Error de validación; la dimensión CV Sucursales no es de gestión
BPF: Error de validación; la dimensión CV Tipo_vta no es de gestión
I am reading "How to configure and execute Business Process Flows in SAP BusinessObjects Planning and Consolidation 7.5 version for SAP NetWeaver"
Thank you.

Hi Vitoto,
Each step should have a driver dimension. This dimension needs to have the OWNER property. So, in each step, you need to select which is the driver dimension. And you need to select the member as well.

Similar Messages

BPF: Validation error; CV dimension "ACCT" is not a drive dimension

HI friends,
I'm designing one bpf, but validating i'm getting below error message.
BPF: Validation error; CV dimension "ACCT" is not a drive dimension
BPF: Validation error; CV dimension "Category" is not a drive dimension
BPF: Validation error; CV dimension "Entity" is not a drive dimension
BPF: Validation error; CV dimension "INP_CURR" is not a drive dimension
BPF: Validation error; CV dimension "PRODUCT" is not a drive dimension
BPF: Validation error; CV dimension "Time" is not a drive dimension
what is drive dim and as already mentioned Location dim ( wth owner property) as driver dim.
why i'm getting this error?
Regards,
naresh

Naresh,
What did you do to resolve this?
Regards,
Nsk

MDT 2010 - Validation Error: The deployment share is read-only, so no changes can be made

I keep getting the above listed error when trying to update the rules on one of my deployment shares. I've even gone so far as to remove the read-only flag on everything in the share, it doesn't help.
As a workaround, I've been editing the CustomSettings.ini directly, but I'd really like this to work. Any ideas?
As an aside, the 'Alert me when someone responds to this post' never seems to work here. And yes, I've checked my spam folder as well...

Ok, it seems to be related to the MDT WizardEditor, but I'm not sure how. I logged on to the server and was able to update the deployment share several times. I closed the MMC, opened the WizardEditor, opened the Deploy.xml thing inside the WizardEditor, closed WizardEditor, reopened MMC - READ ONLY.
Very weird.

EPMA Validation Error: dimension removed or deleted since first deployment

Dear experts,
Our deployment is on EPMA and we were able to successfully deploy the Planning application before. Then we tried to update the dimension by loading UDA to each members, after which, we hit this error at validation:
Error : The xxxx dimension has been removed or deleted since the first successful deployment of the application.
We did have UDA dimension in it before the update and all dimensions in the applications are shared from the library.
Our application is on 11.1.1.3 and we have tried to removed all associations and redo it, but still hit this error. As there are many members being assigned with UDA, wonder if it's possible to solve the error without deleting the UDA dimension and recreate it?
Any input help, please kindly help!
Thanks!!
Edited by: 845931 on Apr 5, 2012 4:20 PM

You will find it in My Oracle Support.
The contents are as below:
Applies to:
Hyperion Planning - Version: 11.1.1.0.00 to 11.1.2.0.00 - Release: 11.1 to 11.1
Information in this document applies to any platform.
Goal
You cannot delete a UDA dimension from EPMA once the application it belongs to has been deployed.
ERROR
The 'Colour' dimension has been removed or deleted since the first successful deployment of the application.
Is there some way to remove the UDA dimension (not just modify its members)? This was possible in the Classic Planning interface but is not when using EPMA.
Solution
This is a limitation of EPMA and Planning. There is no mechanism in version 11.1.1.3 and earlier to allow EPMA to remove dimensions from Planning, and because EPMA treats UDAs, Attribute Dimensions, and Smart Lists as dimensions they also cannot be removed from Planning once the application has been deployed for the first time. They can be modified, but not deleted.
In version 11.1.2 you can delete a UDA dimension in EPMA with no errors but the application will no longer validate (throwing the same error as in 11.1.1.3) and therefore cannot be deployed. However, this does offer an easy way to remove all UDAs assigned to members. If you delete and then re-create a UDA dimension in EPMA the application can be re-deployed again, even if you do not re-create any dimension associations. When you redeploy, all UDAs for this dimension are cleared from Planning and Essbase. This means that although the UDA dimension itself is required in EPMA, there is no trace of it in Planning and Essbase after redeploying.
HTH-
Jasmine.

PL/SQL Equivalent to the condition "No inline validation errors displayed"

Hello,
I've seen this on another thread but can't find it. I need two conditions to be true to show a region: a value is not null and no inline validation errors are showing. Does anyone know the PL/SQL (API call?) to retrieve the number of errors being displayed on screen?

Malcom,
You can use the global variable wwv_flow.g_inline_validation_error_cnt for your access.
So your region displayed condition could be a pl/sql function that would return true or false...like this....
DECLARE
   l_number_of_errors number := 0;
BEGIN
   l_number_of_errors := wwv_flow.g_inline_validation_error_cnt;
   If (:P1_test_item is NULL or l_number_of_errors>0 ) then
         return FALSE;
   else
        return TRUE;
   end if;
END;So, if the item is null, or there is any inline validation error, the region will not be displayed...

Read-only radio group losing value on validation error

It took quite a while to track this down, but I think I've got it narrowed down properly. I have an APEX form for updating a record in a databse table with a radio group which is conditionally read-only. If that radio group has a value AND is read-only, when the form is submitted and hits a validation error, the value of the radio group is lost.
For example, the radio group SUBMITTED_FOR_APPROVAL is set to Y and is read-only for a given user. That user then changes something else on the form and submits it. However, the form now hits a validation error for some field. When the form reloads with the validation error displayed, all the fields are restored except the read-only radio group which is now blank. If a select list is used with the identical read-only condition, it works fine. Likewise, if a radio group is used, but the read-only condition is removed, it works fine. It is only when it is a radio group and it is read-only, that the value does not appear to be submitted to the session with all the form values whent he form is submitted.
Is this a bug or am I simply missing something?
Apex 3.1.2
Rgds/Mark M.

It's using a shared component LOV cleverly called LOV_YN which consists of a static LOV with
1 Display=Yes, Return=Y
2 Display=No, Return=N
The settings in the LOV section on the item iteself:
Named LOV: LOV_YN
Display Extra values: No Dynamic translation: Not translated
Number of columns: 2 Display null: No
Null display value is blank as is null return value
Item was setup as a radio group and was only converted over to a select list to work around this issue. Let me know what else you need and thanks again.
Rgds/Mark M.

Page Sentry fails when validation errors exist

Hi,
We are using a custom page sentry function as our authentication scheme (code below). This seems to work fine except where a validation error occurs. Instead of the page redisplaying with the validation error, the application displays the login page with the validation error.
Any ideas why this is happening?
function Check_Page_Sentry(pUser IN VARCHAR2 DEFAULT 'APEX_PUBLIC_USER') RETURN BOOLEAN IS
vUsername VARCHAR2(512);
vSession NUMBER;
c owa_cookie.cookie;
BEGIN
-- extract user from HTTP header
-- vUsername := UPPER(owa_util.get_cgi_env('REMOTE_USER'));
vUsername := apex_custom_auth.get_username;
     -- extract session id
-- vSession := wwv_flow_custom_auth_std.get_session_id_from_cookie;
vSession := V('APP_SESSION');
-- check that the executing user account is the
-- same as the apex application user, and that
-- a username was populated in the header
IF USER ^= UPPER(pUser) OR vUsername IS NULL THEN
    RETURN FALSE;
END IF;
-- Get SessionId.
-- Check Application Session Cookie.
IF wwv_flow_custom_auth_std.is_session_valid THEN
    apex_application.g_instance := vSession;
    -- check requeted username matches session username
    IF vUsername = wwv_flow_custom_auth_std.get_username THEN
      wwv_flow_custom_auth.define_user_session(p_user => vUsername, p_session_id => vSession);
      RETURN TRUE;
    ELSE
      -- Unset the Session Cookie and redirect back here to take other branch.
      wwv_flow_custom_auth_std.logout(p_this_flow => v('FLOW_ID'),
        p_next_flow_page_sess => v('FLOW_ID') || ':' || NVL(v('FLOW_PAGE_ID'), 0)
        || ':' || vSession);
      -- Tell Apex Engine to quit.
      apex_application.g_unrecoverable_error := TRUE;
      RETURN FALSE;
    END IF;
ELSE
    -- Application Session Cookie not valid --> Define a new Apex Session.
    wwv_flow_custom_auth.define_user_session(p_user => vUsername, p_session_id => wwv_flow_custom_auth.get_next_session_id);
    -- Tell Apex Engine to quit.
    apex_application.g_unrecoverable_error := TRUE;
    IF owa_util.get_cgi_env('REQUEST_METHOD') = 'GET' THEN
      wwv_flow_custom_auth.remember_deep_link(p_url => 'f?' ||
        wwv_flow_utilities.url_decode2(owa_util.get_cgi_env('QUERY_STRING')));
    ELSE
      wwv_flow_custom_auth.remember_deep_link(p_url => 'f?p=' ||
        TO_CHAR(apex_application.g_flow_id) || ':' ||
        TO_CHAR(NVL(apex_application.g_flow_step_id, 0)) || ':' ||
        TO_CHAR(apex_application.g_instance));
    END IF;
    -- Register the Session in Apex Sessions Table, set Cookie, redirect back.
    wwv_flow_custom_auth_std.post_login(p_uname => vUsername,
      p_session_id => nv('APP_SESSION'), p_flow_page => apex_application.g_flow_id
      || ':' || NVL(apex_application.g_flow_step_id, 0));
    RETURN FALSE;
END IF;
END Check_Page_Sentry;Cheers
Paul

Hi Hari,
The user is on a specific page that has validation. When they press the submit button the page should be redisplayed with the validation errors for that page, but it is redisplaying the page validation errors on the login page. The error display location is set to 'Inline with Field and ijn Notification'.
Cheers
Paul

Date Validation Error in Chaining Management

While trying to copy data from another item in chaining management.
After selecting target and source, on pressing "Chain" I get the below error:-
Validation Error
The 'From Date' can not exceed the furthest out 'Sales Date'.
OK
My earliest sales date from sales_data table is "12/27/2010"
The 'From Date' I am giving is the same as my earliest sales date '12/27/2010'.
I am getting this error even after entering dates after '12/27/2010'.
In my sales_data table, the sales_date for the source item ranges from '12/27/2010' to '12/26/2011'.
Please let me know if anyone has faced this problem and found the solution for it.

This is solved.
This was occurring because I had not run the forecast for the source item. The problem went away after running the forecast for the source item.

Dell PowerVault MD3600f - Unable to upgrade firmware - Data validation error

Upgrade Controller Firmware wizard reports the following error.
1 problem detected.
Data validation error: The storage array cannot be upgraded as host port type representation in Controller A did not match with those of Controller B. Contact a technical support representative to resolve this issue.
What does this mean? and how to fix it.

Hi,
yes 100% the error is reported from the dell mdsm software.
steps.
1. open mdsm application
2. right click on powervault md3600f
3. select upgrade raid controller module firmware
4. upgrade raid controller module screen apears and refreshes unit(s) status changes to no upgradeable.
5. error apears in the details window.
6. press view log.
[May 17, 2013 9:25:15 AM] [MD3600] [pre-upgrade tests] [pre-upgrade tests start]
Pre-upgrade tests started
[May 17, 2013 9:25:37 AM] [MD3600] [pre-upgrade tests] [check RAID controller module state]
Test passed - RAID controller module 1
[May 17, 2013 9:25:37 AM] [MD3600] [pre-upgrade tests] [check RAID controller module state]
Test passed - RAID controller module 0
[May 17, 2013 9:25:38 AM] [MD3600] [pre-upgrade tests] [check spm database]
Test passed - RAID controller module 1
[May 17, 2013 9:25:39 AM] [MD3600] [pre-upgrade tests] [check spm database]
Test passed - RAID controller module 0
[May 17, 2013 9:25:39 AM] [MD3600] [pre-upgrade tests] [Physical Disks Unavailable]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check configuration database]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check physical disks]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check disk groups and disk pools]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check hot spares]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check current operations]
Test passed
[May 17, 2013 9:25:42 AM] [MD3600] [pre-upgrade tests] [check virtual disks]
Test passed
[May 17, 2013 9:25:43 AM] [MD3600] [pre-upgrade tests] [check internal data validity]
Data validation error: The storage array cannot be upgraded as host port type representation in Controller A did not match with those of Controller B. Contact a technical support representative to resolve this issue.
[May 17, 2013 9:25:44 AM] [MD3600] [pre-upgrade tests] [check event log]
The event log was cleared within the last 24 hours (event type: 100).
[May 17, 2013 9:25:45 AM] [MD3600] [pre-upgrade tests] [check event log]
Test passed
[May 17, 2013 9:25:45 AM] [MD3600] [pre-upgrade tests] [pre-upgrade tests complete] [0h 0m 30s]
Pre-upgrade test(s) failure - the storage array cannot be upgraded in its present state

The "Measures" dimension contains more than one hierarchy... Collation issue

It appears that an Excel query pased through to SSAS has a "measures" with lowercase "m" when analysis services expects an uppercase "M" so it should look like "Measures". Is there a fix in excel to allow
the correct passing of "Measures" member name to the cube?
BTW, I have NO Calculations in the cube.
In excel 2013 when I pivot with a pivot table connected to a case sensitive collation (non default config)
cube and perform a filter by "Keep only Selected Items" I get the error "The 'Measures' dimension contains more than one hierarchy, therefore the hierarchy must be explicity specified".
When I revert back to server wide setting to case insensitive, and I preform the exact same pivoting function it works without error. The problem appears to be that excel does not understand the server collation setting.
When I run SQL Server Profilier I narrowed down the MDX statement run in Excel that gives me an error to this:
with
member measures.__XlItemPath as
Generate(
Ascendants([Employee].[Location Code].currentmember),
[Employee].[Location Code].currentmember.unique_name,
"|__XLPATHSEP__|"
member measures.__XlSiblingCount as
Generate(
Ascendants([Employee].[Location Code].currentmember),
AddCalculatedMembers([Employee].[Location Code].currentmember.siblings).count,
"|__XLPATHSEP__|"
member measures.__XlChildCount as
AddCalculatedMembers([Employee].[Location Code].currentmember.children).count
select { measures.__XlItemPath, measures.__XlSiblingCount, measures.__XlChildCount } on columns,
[Employee].[Location Code].&[01W]
dimension properties MEMBER_TYPE
on rows
from [Metrics]
cell properties value
Playing around with the query I discovered that if I capitalize the first letter of the "with measures" member, the statement works.
with
member Measures.__XlItemPath as
Generate(
Ascendants([Employee].[Location Code].currentmember),
[Employee].[Location Code].currentmember.unique_name,
"|__XLPATHSEP__|"
member Measures.__XlSiblingCount as
Generate(
Ascendants([Employee].[Location Code].currentmember),
AddCalculatedMembers([Employee].[Location Code].currentmember.siblings).count,
"|__XLPATHSEP__|"
member Measures.__XlChildCount as
AddCalculatedMembers([Employee].[Location Code].currentmember.children).count
select { measures.__XlItemPath, measures.__XlSiblingCount, measures.__XlChildCount } on columns,
[Employee].[Location Code].&[01W]
dimension properties MEMBER_TYPE
on rows
from [Metrics]
cell properties value
Also, I realise that I could change the collation on just the cube itself to case insenstive to get this to work, but I really don't want to do an impact analysis of running a mixed collation environment.
So, my question is: Is there an excel fix that will allow me to run a case sensitve cube and allow me to click on filter and filter by "keep only selected items" or "Hide selected Items"? All other filtering works, it's only those two
filtering options error for me.
Here are the versions I'm working with:
Excel 2013 (15.0.4535.1507) MSO(15.0.4551.1007) 32-bit Part of Microsoft Office Professional Plus 2013
Microsoft Analysis Server Enterprise 2012 11.0.3000.0
Any help would be appreciated. Thank you in advance!

Hi, i assume this logic is for Dimension formula?
If you have multiple hierarchy like ParentH1 and ParentH2 you should use FormulaH1 and FormulaH2 and not FORMULA column.
in FORMULAH1
[Account.H1].[Account_A] / [Account.H1].[Account_B]

Does anyone know what the entity property of the currency dimension does?

Hi,
I'm trying to figure out what the Entity property of the Currency dimension does. All the online documentation I can find has the definition below which is not all that useful. Has anyone uses this before and know how it can be used?
Thanks,
Morgan
Online definition
A 32-character field that can either be left blank or contain a valid
member name of the entity dimension associated to the current model. The ENTITY property is
validated against the entity dimension, and blank fields are allowed.

Sounds like it provides one (extra) internet phone number that goes to their servers first. Then it could work like this:
1) If you have the app running on your phone (oops, no background processing... perhaps this will be one of the first tests of background notifications), it uses the GPS to tell the server if you're near a landline that you've previously registered with it. If so, their server redirects the call to the landline phone.
2) While you're on a call, you can start a conference call that includes the alternative phone (landline or iPhone) and then hang up on the old one. That would give a "seamless" switchover.

TS1368 When I try to make a purchase at the App Store or iBook Store or iTunes an error message tells me my account is not valid at the UK store. I live in Canada so how did I get to be connected to the UK and how can I get back to Canada?

When I try to make a purchase at the App Store or iBook store or at iTunes an error message tells me my account is not valid for the UK store. I've no idea how I got connected there and I'd like help getting back to Canada where I live. Any suggestions?

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you are located.
8. Tap "Done".

After moving from Canada to the US, getting a new iPhone 5C, and restoring my backup from iCloud, I can't update my apps. I get an error message that my account is not valid in the Canadian App store and I must change to the US store. How do I do that?

After moving from Canada to the US, getting a new iPhone 5C, and restoring my backup from iCloud, I can't update my apps. I get an error message that my account is not valid in the Canadian App store and I must change to the US store. How do I do that?

Change here:
Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
You must have a verified billing address & be located in the country whose store you are trying to use.

The object has been corrupted, and it's in an inconsistent state. The following validation errors happened:

Dear Friend
I have got below error message in the exchagne server 2013 while i tried to open the console of delegation mailbox . It was comes once i was deploy lync server 2013 in the same forest.
warning
The object has been corrupted, and it's in an inconsistent state. The following validation errors happened:
The access control entry defines the ObjectType 'd819615a-3b9b-4738-b47e-f1bd8ee3aea4' that can't be resolved..
The access control entry defines the ObjectType 'e2d6986b-2c7f-4cda-9851-d5b5f3fb6706' that can't be resolved..
If you feel to ask to more clarification, please let me know.
Regards, Md Ehteshamuddin Khan All the opinions expressed here is mine. This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

Hi,
Based on the description, you got warnings when you tried to click the mailbox delegation option of mailbox properties in EAC. Is it right?
Did this issue affected only one user mailbox or all of them?
From the error message, it seems that this issue is related to the corrupt permissions. Please use the
Get-MailboxPermission cmdlet to retrieve permissions on a mailbox to check result.
Best regards,
Belinda Ma
TechNet Community Support

Item Interface error - "The Cost of Sales Account specified is not a valid"

A week back we migrated from 11.5.10 to 12.1.3
Since then, many items are failing in Item Interface with the error "The Cost of Sales Account specified is not a valid account or has expired in organization ITEM MASTER INV."
Item Master being the 'Inventory master organization'. I checked the cost of sales account & sales account. and they are Valid also their corresponding segments are valid in their respective value sets.
Log message for 'Item Import'
Import Items
Argument 1 (ORG_ID) = 167
Argument 2 (ALL_ORG) = 1
Argument 3 (VAL_ITEM_FLAG) = 1
Argument 4 (PRO_ITEM_FLAG) = 1
Argument 5 (DEL_REC_FLAG) = 1
Argument 6 (PROCESS_SET) = 77
Argument 7 (MODE) = 2
Argument 8 (Gather Stats) = 1
TRANSACTION ID : 42878726
ORGANIZATION ID : 174
TABLE NAME : MTL_SYSTEM_ITEMS_INTERFACE
COLUMN NAME : COST_OF_SALES_ACCOUNT
MESSAGE NAME : INV_IOI_ERR
ERROR MESSAGE : The Cost of Sales Account specified is not a valid account or has expired in organization ITEM MASTER INV.
TRANSACTION ID : 42878726
ORGANIZATION ID : 174
TABLE NAME : MTL_SYSTEM_ITEMS_INTERFACE
COLUMN NAME : SALES_ACCOUNT
MESSAGE NAME : INV_IOI_ERR
ERROR MESSAGE : The Sales Account specified is not valid or has expired for the organization ITEM MASTER INV.
Please help.

The Cost_of_sales_account & Sales_account as defined in the MTL_PARAMETERS are different from those in MTL_SYSTEM_ITEMS_B for the corresponding item. The values for these accounts in the interface tables are same as that in the MTL_SYSTEM_ITEMS_B table and hence not same as those defined in MTL_PARAMETERS.
Actually we have a Custom trigger on the MTL_SYSTEM_ITEMS_B table which updates these accounts, once the item is created in the Master Organization.
To verify this issue, I updated the accounts on the MTL_SYSTEM_ITEMS_INTERFACE table to match with that of MTL_PARAMETERS. Ran the 'Item Import', now those records are processed.
Does this means that, the Interface is validating the cost_of_sales_account & sales_account to match with that of the 'Organization' ??.
But we never had this issue in 11i. Is this a part of R12??

BPC 7.5 NW - BPF: validation error the CV dimension is management ?

Similar Messages

Maybe you are looking for