BPC via sapwebdisp/proxy
Hello,
This is a repost from another forum, but still the same question.
BPC 7.0 for Netweaver, connecting to a BI 7.01 system. (I might upgrade to 7.5 if forced).
I am trying to figure out if what I want to do is possible or if I am on the correct path.
We have a controlled ECC/BI/Portals enviorment and the only webaccess to our env is through sapwebdisp server outside of our SAP context. We are in the process of implementing BPC and I am wondering if I can use our same webdispatcher to re-direct/pass through all of my BPC information to the correct system.
user --> webdispatcher --> firwall ---> BPC .NET Server ---> BI Server
We would have
sapwebdisp:443/irj --> Portals Box
sapwebdisp:443/sap --> point to ECC
sapwebdisp:443/bw ---> point to BI
and
sapwebdisp:443/OSoft forward to BPC IIS Server port (80 or 443, does not matter),
Is this the best way to do it? Since BPC does not have a message server (just IIS), I am unsure if I can design it this way or if I should try some other tools for this.
We want to continue to have the webdispatcher as the only web access into all of our systems.
Any thoughts?
So I guess my real question is can I use webdispatcher for IIS servers, or is there another tool that will allow this.
Thanks,
Russell Hull
Certified SAP Technology Consultant
How did you solved this problem?
Similar Messages
-
Push data from BW 3.5 to XI 3.0 via ABAP proxy
Hi,
I have the following scenario: I´m in BW 3.5 trying to send data to XI 3.0 via ABAP proxy. I´ve already found a "How-to" to do build this scenario, but something does not work. I think that problem is when a try do the logon from BW to XI because I got the message "logon data not provided" on http service in XI. I´ve already configure an RFC Destination(SM59) as R/3 connection(type 3) and another as HTTP connection to R/3(type H) and both are correct. Someone knows where I configure the user/pass to logon from BW Intergration Server to XI Integration Server?
Regards,
Rafael SoaresHello fellows!
I discovered that my problem was configuration on SXMB_ADM transaction.
Thank you very much for your help!
Best regards.
Rafael -
How do I send HTTP request to a server via a proxy server in JDK 1.4?
JDK 1.5 's URL class provides an overloaded version of openConnection() which accepts an object of type Proxy using which we can establish connection with a remote server via a proxy server, but JDK 1.4 doesn't provide any such overloaded version. How do I do that in JDK 1.4? Even if I had a class that can create HTTP packets for me, then I could have established Socket connection with the proxy server and sent the HTTP packet to it. Is there a way to do that also?
There are some system properties, which can be set with System.setProperty [http://java.sun.com/j2se/1.4.2/docs/guide/net/properties.html]
-
How to Displaying Employee Photo in ESS Who's Who via Reverse Proxy?
Dear Gurus,
I have a bit of problem to displaying employee's photo in ESS Who's Who via Reverse Proxy.
In my landscape, end-users are only able to reach the Reverse Proxy server, not the actual SAP server itself.
In Who's Who, when displaying the employee's info, the URI for the photo is generated using the actual SAP server name.
Illustration:
- the URI we expect: https://portal.domain.com/sap/bc/contentserver?.....
- the URI we get: http://r3server.domain.com/sap/bc/contentserver?....
Does anyone know where/how I can set the URL (hostname and protocol part) to refer to my reverse proxy?
Or is it because SAP is using an absolute path rather than the relative one?
How do we go about it?
Thanks in advance.Dear Barinbhai,
How are you? We are fine at here!!!
Following URL generated thru Portal
System generated : http://p30app06.ril.com:8000/sap/bc/contentserver/430?get&pVersion=0046&contRep=7N&docId=4D2155EB6C32545BE10000000A42163F&accessMode=r&authId=CN%3DQ10&expiration=20110215052004&secKey=MIIBkwYJKoZIhvcNAQcCoIIBhDCCAYACAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAV8wggFbAgEBMBMwDjEMMAoGA1UEAxMDUTEwAgEAMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xMTAyMTQwNTIwMDRaMCMGCSqGSIb3DQEJBDEWBBTJCER2r9%2BifbQPOtCqJdAoJ99NTzCBpgYFKw4DAhswgZwCQQCJ%2FPuWmHE5m%2Bd1vtX464doAJIsN2SmIpBAUe7jLGtmAD7F6ElSWOtC6uMuXUPisyKr3lRQ6IOC1ZhVPsnnXJsZAhUAtGAwyGWTqdJdd7nwrXKA7T%2B3GVcCQBUQxMBImvHdAsIyF3DmBtPwHcPpyCyBbJ737ivcuw2qjdJeGttSqR8GGuPn0DmzF36%2BUSnLRxZVNPn6nUbnPx0ELjAsAhR7G1vGjngjoll50RhWKcDlBTvVKgIUZ1NlQXMe61LXcqsTGsz7r28Kzh0%3D
Photo opening directly on following URL:::
Desired URL : http://ess.ril.com/sap/bc/contentserver/430?get&pVersion=0046&contRep=7N&docId=4D2155EB6C32545BE10000000A42163F&accessMode=r&authId=CN%3DQ10&expiration=20110215052004&secKey=MIIBkwYJKoZIhvcNAQcCoIIBhDCCAYACAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAV8wggFbAgEBMBMwDjEMMAoGA1UEAxMDUTEwAgEAMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xMTAyMTQwNTIwMDRaMCMGCSqGSIb3DQEJBDEWBBTJCER2r9%2BifbQPOtCqJdAoJ99NTzCBpgYFKw4DAhswgZwCQQCJ%2FPuWmHE5m%2Bd1vtX464doAJIsN2SmIpBAUe7jLGtmAD7F6ElSWOtC6uMuXUPisyKr3lRQ6IOC1ZhVPsnnXJsZAhUAtGAwyGWTqdJdd7nwrXKA7T%2B3GVcCQBUQxMBImvHdAsIyF3DmBtPwHcPpyCyBbJ737ivcuw2qjdJeGttSqR8GGuPn0DmzF36%2BUSnLRxZVNPn6nUbnPx0ELjAsAhR7G1vGjngjoll50RhWKcDlBTvVKgIUZ1NlQXMe61LXcqsTGsz7r28Kzh0%3D
Pls sugget..
Hitesh Khatri
SAP -HR
RIL - Navi Mumbai.... -
Problem sending xls file in an attachment via ABAP proxy
Hello,
I have in tmp directory a xls file, I tranfer such file to a table, and afterwards I send in an attachment via ABAP proxy, here is the code:
l_attachment TYPE REF TO if_ai_attachment,
lt_attach TYPE prx_attach,
l_name TYPE string,
lx_string TYPE xstring,
l_string TYPE string,
l_type TYPE string,
des TYPE string.
CLASS cl_ai_factory DEFINITION LOAD.
DATA: BEGIN OF itab OCCURS 0,
raw(255) TYPE x,
END OF itab.
DATA: l_controller TYPE REF TO if_ai_posting_controller.
DATA: it TYPE zhcm_mt_segur_out.
CREATE OBJECT prxy.
OPEN DATASET orig FOR INPUT IN binary MODE.
READ DATASET orig INTO itab-raw.
WHILE sy-subrc = 0.
APPEND itab.
READ DATASET orig INTO itab-raw.
ENDWHILE.
CLOSE DATASET orig.
LOOP AT itab.
CONCATENATE lx_string itab-raw INTO lx_string in byte mode.
ENDLOOP.
L_NAME = 'Segur.xls'.
L_TYPE = CL_AI_ATTACHMENT=>IF_AI_ATTACHMENT~C_MIMETYPE_EXCEL.
TRY.
L_ATTACHMENT =
CL_AI_FACTORY=>CREATE_ATTACHMENT_FROM_binary(
P_DATA = LX_STRING
P_TYPE = L_TYPE
P_NAME = L_NAME ).
APPEND L_ATTACHMENT TO LT_ATTACH.
L_CONTROLLER = CL_AI_FACTORY=>CREATE_CONTROLLER( ).
L_CONTROLLER->SET_ATTACHMENTS( LT_ATTACH ).
CALL METHOD PRXY->EXECUTE_ASYNCHRONOUS
EXPORTING
CONTROLLER = L_CONTROLLER
OUTPUT = IT.
COMMIT WORK.
CATCH CX_AI_SYSTEM_FAULT .
DATA FAULT TYPE REF TO CX_AI_SYSTEM_FAULT .
CREATE OBJECT FAULT.
WRITE :/ FAULT->ERRORTEXT.
ENDTRY.
I am using a Mail receiver channel, I receive a mail, with to attachments, one .xml and the other one .bin, I save it to my computer and I change the extension to .xls and when I try to open it, the file is not valid and can be opened after being repaired. What Im doing wrong? I would like to receive a valid xls file, what i should change?
Thanks a lot,
LuisHi,
yes I know, I have used the MessageTransformBean module, and the PayloadSwapBean module. But which parameter I should use for leaving only one attachement in the e-mail. I did this configuration:
1
localejbs/AF_Modules/MessageTransformBean
Local Enterprise Bean
<b>trans</b>
2
localejbs/AF_Modules/PayloadSwapBean
Local Enterprise Bean
<b>swap</b>
3
localejbs/AF_Modules/MessageTransformBean
Local Enterprise Bean
<b>trans1</b>
4
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean
Local Enterprise Bean
mail
<i><b>Module configuration</b></i>
trans
Transform.ContentDisposition
inline
swap
swap.keyName
payload-name
swap
swap.keyValue
Segur
trans1
Transform.ContentDescription
Segur
trans1
Transform.ContentDisposition
attachment;filename="Segur.xls"
trans1
Transform.ContentType
application/vnd.ms-excel;name="Segur.xls"
In the e-mail I get one attachement without name .xml and another one Segur.xsl, and I want only one attachment, the last one. What I should change in my configuration??
Best regards,
Luis -
I have come across one client requirment where he needs to send the txt/pdf file as an attachment from R/3, currently that interface is using the ABAP Proxy, is there any idea about How to send the attachments via ABAP Proxy?
Hi,
Refer
XI: RFC or ABAP Proxy ? ....ABAP Proxies with attachments
/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
Problem sending xls file in an attachment via ABAP proxy
Receive mail with PDF attachment into XI and send to ABAP proxy
http://help.sap.com/saphelp_nw70/helpdata/en/51/d5cd16235e4643ae8ec92395c4ad97/frameset.htm
Thanks
Swarup -
File to R/3 via Abap proxy -- need help
Hello,
I have made a scenario File to R/3 via Abap Proxy
My Inbound Async Message Interface has Message Type -Emp_Rac_Detail_MT.
Message Type has structure
EmpID
EmpName
Age
I have table in R/3 ZRACTABLE where I need to post data
Fields in ZRACTABLE are
EMPID
EMPNAME
AGE1
Pls send me the code that I need to write in Async Method of Proxy
that will put data
RegardsHi Herry,
First of all u have to write a Function module in R/3 ....for that i given u the code above.
Now in ur inbount proxy in the implementation class u have to write code right???
Here is the code...
**** INSERT IMPLEMENTATION HERE **** ***
DATA:
lv_EMPID type EMPID,
lv_EMPNAME type EMPNAME,
lv_AGE type AGE.
Convert Input Parameters
lv_EMPID = input-Emp_Rac_Detail_MT-EMPID.
lv_EMPNAME = input-Emp_Rac_Detail_MT-EMPNAME.
lv_AGE = input-Emp_Rac_Detail_MT-AGE.
call function 'ZEMP_RAC_FM' /** thats ur function module name **/
EXPORTING
EMPID = lv_EMPID .
EMPNAME = lv_EMPNAME.
AGE = lv_AGE.
endmethod.
Regards
biplab
<i>*** give points if it hepls you!!!</i> -
Unable to connect to internet via the proxy - Proxy set up OEM 12c
Windows server 2008 64 bit
OEM 12.1
I have to get agent software for Windows server 2003, and as far as I know the only way is through self update in OEM, is this the only way?
But when I input my Oracle support credentials I get an error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
Proxy settings in EOM are set for https, but not sure about the realm, I input our damain address "company.corp"
test successful :
https://updates.oracle.com was tested successfully using the Proxy.
Go to set oracle support credentials error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
In the emoms.log file :
2012-07-22 18:28:50,753 [EMUI_18_28_49_/console/admin/rep/proxy/server] ERROR core.patch logp.251 - [EM-01942] Unable to connect to internet via the proxy. Http Proxy - company:80. Destination URL - https://server:proxy/emd/main/. Protocol - https. Error Message - Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. ).
java.io.IOException: Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. )Please check the following section in
http://docs.oracle.com/cd/E24628_01/install.121/e24089/firewalls.htm#EMADV626
Enabling Oracle Management Service to Access My Oracle Support
Unless online access to the Internet is strictly forbidden in your environment, Oracle Management Service should be enabled to access My Oracle Support. This access is necessary to enable updates and patches to be downloaded, for example.
At minimum, the following URLs should be made available through the firewall:
aru-akam.oracle.com
ccr.oracle.com
login.oracle.com
support.oracle.com
updates.oracle.com
About the dontProxyfor Property
When you configure the Oracle Management Service or a Management Agent to use a proxy server, it is important to understand the purpose of the dontProxyFor property, which identifies specific URL domains for which the proxy will not be used.
For example, suppose the following were true:
You have installed the Oracle Management Service and several Management Agents on hosts that are inside the company firewall. These hosts are in the internal .example.com and .example.us.com domains.
You have installed several additional Management Agents on hosts that are outside the firewall. These hosts are installed in the .example.uk domain.
You have configured Enterprise Manager to automatically check for critical software patches on My Oracle Support.
In this scenario, you want the Oracle Management Service to connect directly to the Management Agents inside the firewall without using the proxy server. On the other hand, you want the Oracle Management Service to use the proxy server to contact the Management Agents outside the firewall, as well as the My Oracle Support site, which resides at the following URL:
http://support.oracle.com
The following properties will prevent the Oracle Management Service from using the proxy server for connections to the Management Agents inside the firewall. Connections to My Oracle Support and to Management Agents outside the firewall will be routed through the proxy server:
proxyHost=proxy42.example.com
proxyHost=80
dontProxyFor=.example.com, .example.us.com
PS: Cygwin has nothing to do with My Oracle Support connection. Cygwin is ONLY required for agent deployment using agent push from OMS. -
Can data be loaded in BPC via eSOA Services?
Can data be loaded in BPC via eSOA Services? If so, how?
Data can be loaded in BPC via eSOA Services.
To explain how to do that you first should have the public interface which can be provided on request by support(help desk)
You will see all the public interfaces which can be called from application server and you will be able to see some functions from data manager.
Regards
Sorin Radulescu -
HTTP connection from OSB web service to external system via a Proxy Server
Dear experts,
May I know has anyone tried to use HTTP protocol to send a request from OSB web service to external system via a proxy server? Heard that we need to establish some sort of tunnel (socket) to talk to Proxy Server. Can you please any have sample code or configuration steps to share?
Thank you very much!!http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/global_resources.html#wp1137294
Adding Proxy Servers
Use the Summary of Proxy Servers page to add and configure Proxy Server resources and make them available in Oracle Service Bus as a system resource. You must be in an active session to configure or reconfigure Proxy Server resources.
1. If you have not already done so, click Create to create a new session or click Edit to enter an existing session. See Using the Change Center.
2. Select System Administration > Proxy Servers.
3. Click Add.
4. In the Name field, enter a name for the Proxy Server resource. This is a required field.
5. In the Description field, enter a short description for the Proxy Server resource.
6. In the Host-Port Parameters section, enter the following information:
1. In the Server Host field, enter the host name or IP address of the Proxy Server. This is a required field.
The Server Host name for the Oracle Service Bus proxy server must be identical to the server host name of the actual proxy server.
2. In the Clear Text Port field, enter the Proxy Server clear-text port number.
3. In the SSL Port field, enter the Proxy Server SSL port number. You must enter either a clear text or SSL port number.
4. Click Add.
You can configure multiple Proxy Servers for each Proxy Server resource. This enables Oracle Service Bus to perform load balancing and offer fault tolerance features for the Proxy Server resource.
7. If the Proxy Server performs proxy authentication, enter a user name in the User Name field, and the associated password in the Password and Confirm Password fields.
These fields are optional, and required only if the Proxy Server is secured.
8. Click Save to create and save the Proxy Server resource in the current session.
9. To end the session and deploy the configuration to the run time, click Activate under Change Center. -
Accessing Distributed Queue In a Cluster via the Proxy Server
I am running WL 8.1 SP2. I have a configuration where I have 3 servers (on two
different machines) running in a cluster. I have a separate server on a 3rd machine
running the cluster proxy server for a single point of access to the cluster.
I have configured a distributed queue and a distributed topic, each targeted
to all servers in the cluster.
Now I have a JMS client which is a separate java application that is trying to
connect to the distributed queue and topic in the cluster. If the client connects
directly to one of the cluster machines, it is able to successfully interact with
the JMS queue and topic. But if it attempts to connect via the proxy server it
gets an error saying the queue and topic does not exist.
So what am I missing? Do I need to configure a separate JMS server on the proxy
server and add that as part of the distributed queue & topic (this didn't seem
to allow me to add anything outside of the cluster). Is there any special configuration
in the proxy to pass through JMS requests? I'm currently using a WL logic server
as my front-end proxy server but does anything change if I want to use Apache
with the WL Proxy plug-in??
Jerald
"Jerald Pratt" <[email protected]> wrote in message
news:[email protected]...
>
> I am running WL 8.1 SP2. I have a configuration where I have 3 servers
(on two
> different machines) running in a cluster. I have a separate server on a
3rd machine
> running the cluster proxy server for a single point of access to the
cluster.
> I have configured a distributed queue and a distributed topic, each
targeted
> to all servers in the cluster.
>
> Now I have a JMS client which is a separate java application that is
trying to
> connect to the distributed queue and topic in the cluster. If the client
connects
> directly to one of the cluster machines, it is able to successfully
interact with
> the JMS queue and topic. But if it attempts to connect via the proxy
server it
> gets an error saying the queue and topic does not exist.
Yup... That makes sense...
>
> So what am I missing? Do I need to configure a separate JMS server on the
proxy
> server and add that as part of the distributed queue & topic (this didn't
seem
> to allow me to add anything outside of the cluster). Is there any special
configuration
> in the proxy to pass through JMS requests? I'm currently using a WL logic
server
> as my front-end proxy server but does anything change if I want to use
Apache
> with the WL Proxy plug-in??
One option I have used frequenly is specifying java.naming.provider.url as
cluster address (e.g. t3://server1:7001,server2:7001
You may also want to look into tunnelling...
>
> Jerald
>
-
Est-ce que creative cloud supporte maintenant les connexions à internet via un proxy ?
Est-ce que creative cloud supporte maintenant les connexions à internet via un proxy ?
Thanks for you answers.
My browser can reach internet thru the proxy parameters. However in the same time CC display a popup telling that it has no access to internet.
How to tell CC the proxy parameters ?
regards. -
Publication WEB via un proxy génére une "erreur de connexion". Pourquoi?
Je gère une éolienne à distance grâce à la publication WEB. Tout se passe très bien sauf lorsque la connexion se fait via un proxy. Pourquoi? Comment m'en affranchir?
J'utilise LabView 7.1.
Merci. Paul.Le problème est très simple : par défaut la connexion interne du lycée passe par un proxy ; dans ce cas fenêtre distante affiche "erreur de connexion".
Si par contre dans Internet Explorer 6, dans Outils/ Options internet/connexions/paramètres avancés ; je coche "ne pas utiliser le proxy pour les adresses locales", j'obtiens la face avant sans problème. J'ai le même problème depuis l'extérieur.
Je ne connais pas exactement les paramètres du firewall, mais l'essai précédent me fais dire qu'il n'est pas en cause.
D'apès mon administrateur réseau, la publication WEB de LabView enverrait des données dans l'entête des paquets, et le proxy les modifiant pour son routage, la fenêtre distante génére l'erreur de connexion.
Configuration de LabView :
VI serveur configuration : tout coché ; port21
VI serveur liste d'accès TCP/IP : liste : * ; autoriser l'accès.
VI serveur VIs exportés : idem
serveur WEB configuration : activiver le serveur WEB ; Port 81 ; time out 300s.
Serveur WEB accès par navigateur : liste : * ; autoriser la visualisation et le controle.
Serveur WEB : VIs visibles liste : * ; autoriser l'accès ; temps controle : 300s.
des essais sont possibles: http://www.lyc-gillesdegennes.ac-aix-marseille.fr/eolienne/eolienne1.html?gennes
PS : elle n'est pas toujours publiée: faire plusieurs essais. -
Will creative cloud work via a proxy server
We use a proxy server for all our internet connections. Will creative cloud work via a proxy server?
Hi - I'm i a similar position to the OP, we've bought a cc2014 individual licence but I work in a government organisation with proxy server and strong firewall and we can't download even the desktop manager. When I spoke to support they said it was unlikely I'd be able to get it to work through our system, and even if we upgraded to a teams licence we'd still have a problem as the indidual computers would still need a clean connection through to the adobe servers to activate.
The document linked only talks about the Packager and the Teams/Enterprise licence, so is there just no solution for anyone with a single licence that has to work via a proxy server? Would a Teams licence solve these problems? -
AnyConnect on Apple iOS - VPN-Connect via HTTP-Proxy
Hi,
is it possible, that the AnyConnect-Client for Apple iOS (i.e. iPAD) automatically uses the configured HTTP-Proxy in the WLAN properties for the establishment of the VPN-Connection (via SSL/TLS)?
I've tested it, but it does not work. In the documentation is stated, that VPN establishment via HTTP-Proxy works only in Windows (AnyConnect uses the IE Proxy settings to connect to the ASA for VPN establishment).
ThanksAs per w2k3 sniffer trace, 2851 requesting with user=vpnfamily and encrypted password. The password "Password1" which is VPN group's key sending to IAS?
->I have "vpnfamily" with password "Password1" but no luck
Event log shows "Fully-Qualified-User-Name = INFRA\vpnfamily". INFRA is AD NetBIOS name. 2851 router's domain name is "family.com"
->Is this something wrong?
Maybe you are looking for
-
Pulse train generation fails with certain values for "number of samples"
I'm generating a retriggerable analog output signal, and so I'm using a counter as the sample clock (see: Retriggerable AI Using Retriggerable Counter). I am finding that, above a certain number of samples, and only for certain values of the number o
-
Dragging files out of portfolio
By default a user is able to drag a file out of a pdf portfolio onto their desktop or a folder. Permission to drag those items onto another document or program is restricted. I'm wondering if it's possible to grant permission to drag the file out of
-
Trying to secure my wireless security
I am trying to secure my wireless security and I keep getting the following error message "Execption has been thrown by the target of an invocation" can someone please help me with this? Thanks
-
Hi all, I have F.17 standard transaction code assigned to a Z program in SAP 6.0 which is very strange to me. All the company codes are assigned to the standard program SAPF130D. How can I run the program, with what transaction? I cannot assign a new
-
Is it possible to have a full page of text?
I would like to create a book with a page of just text. I cannot find a page layout that will let me do this. Has anyone been able to accomplish this task? IMAC Mac OS X (10.4.10)