Bpel console not showing domain name

Hi
i have installed a new jdev 10.1.3.1 and also have 10.1.2. first version is working fine examples but bpel console is not showing domain name in 10.1.2.
pls anyone can tell me what may be the problem.Is it bcoz of two version in same machine.?? Its urgent help out............

this is understandable - at per default we use oracle lite - which only allows ONE installation on a windows system ..
to run both in paralell you have to install a db and create the 2 schemas (10.1.2.0.2 and 10.1.3.1) - I posted a blog note on this ..
http://clemensblog.blogspot.com/2006/04/oracle-bpel-xe-part-2.html
hth clemens

Similar Messages

Network Location not showing domain name in Server 2012 R2 after demoting 2003 PDC

The single active NIC in my new Server 2012 R2 no longer shows the Network Location of "DOMAIN.LOCAL" like it did before I demoted the only Server 2003 domain controller. The NIC now shows "NETWORK" as the Network Location.
The registry still shows a Profile with the correct PROFILENAME in
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList\Profiles
but that name does not show up in the Network List Manager Policies inside Local Security Policy.
The 2012 R2 Srv has all of the FSMO roles, Client PC's can connect to the domain but will not get new map drives from a script, they must be created manually. My Quickbooks Enterprise clients cannot see the QB Server Manager on this server and I think it
is related to this issue because of firewall restrictions.
The Windows Firewall pointed me in this direction because the "Private Networks" is connected to my NIC named "Network" but the Firewall "Domain Networks" is reported as "Not connected."
Any Help is appreciated,
CrazyDog

Hi,
Based on my research,
Network Location Awareness (NLA) service expects to be able to enumerate the
domain’s forest name to choose the right network profile for the connection. The service does this by calling
DsGetDcName on the forest root name and issuing an LDAP query on UDP port 389 to a root Domain Controller.
If something hinders the DNS name resolution or the connection attempt to the DC, NLA is not able to set the appropriate network profile on the connection.
Therefore, I suggest you check the DNS settings on DCs and other domain-joined machines, which should point to the existing DC as preferred DNS server, and secondary DC as alternate DNS server, IP address of demoted DC should be
removed. In addition, please do not use loopback IP address.
Here are some articles below I suggest you refer to:
Network Location Awareness (NLA) and how it relates to Windows Firewall Profiles
http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
Network Location Awareness
http://technet.microsoft.com/en-us/library/cc753545(v=WS.10).aspx
Complete Step by Step to Remove an Orphaned Domain controller
http://msmvps.com/blogs/acefekay/archive/2010/10/05/complete-step-by-step-to-remove-an-orphaned-domain-controller.aspx
Best Regards.
Amy

BPEL Console not showing instance.

I have written an Empty BPEL (not sync/async) process. Internally it calls three synchronous Web Services(partner links). The process starts with a DB poller. When I run the process the three partnerlink process instances are shown but the main BPEL does not appear in the instances list in the BPEL Console. (This is occuring whenever there is a fault in the BP, when the BP executes successfully it is shown in the BPEL Console.) How can I get to know the error in such a case?
Adding a Java Embedding did not work because when the Java Embedding is after the step where the fault is occuring then the instance is not getting reflected.
Any idea where BPEL process logs are written and how can I write custom logs in the log file?
Any help would be appreciated.

Check the log file at
$ORACLE_HOME/opmn/logs/default*.log

BPEL Console not showing input fields for process

I'm having a problem with our BPEL processes. When testing them in the BPEL Console the form for entering the input fields does not appear, even when switched to XML entry instead of HTML.
The problem seems to occur in processes which take their input schemas from a different directory from the BPEL process. This was working fine in Oracle 10.1.2. We can successfully load the schema by entering its URL, and if the process is started without entering any data, the input message is correctly generated, just with all fields empty. So it seems like the schema is being found.
When both the input and output schemas are specified inline in the project WSDL file, it works correctly. The problem occurs when referencing the schema in a different location. We have numerous projects which share common schemas, so specifying them all in-line is not a workable solution.
Has anyone else encountered this problem, or found a solution to it?
Thanks for your help.
Howard

I have similar process where I am able to see the instance incomplete process C, the issue is with the present process.
actually process B and C are from production I have designed the new process A, which is calling B and B is calling C.
I have also designed other process A1(new) which is calling B1(existing) and B1 is calling C1(existing), there I am able to see the instance of C1
dont know why it is happening like this for process C
please advice
thanks
yatan

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

I am also having problems with a site I am building. No matter what websafe font I use it displays as New Times Roman in FireFox. The correct fonts show in both IE9 and Chrome.
In addition, text shifts in FireFox. I have to position other text objects farther and farther apart as I go down the page or they start to overlap. Nav buttons and other images also have to be positioned in the wrong place for them to be in the correct place when the page is opened in FireFox. FireFox should display pages correctly by default. I can't expect th average user to have to tweek his/her settings to display my site.
I have been recommending FireFox on my website as the best browser. I might have to change that and abandon FireFox myself.

I have an I phone 4s and I have many contacts in my phone. However, whne my phone rings or I receive a text, the phone does not show the name of the contact person only the phone number. I have checked every setting I can think of ?

I have an I phone 4s and I have many contacts in my phone. However, when my phone rings or I receive a message. The phone does not show the name of the caller. It only shows the phone number that is calling. I am sure this is a setting problem, but I have checked every setting I can think of. Any suggestions??

If you are a Verizon user try this:
Open the phone and dial *228. This is a Verizon over-the-air programming number.
When the system answer press 1 for "Program or activate your phone"
Wait for the call to disconnect. You should get a prompt stating "Settings updated."
Double tap the Home button to bring up the recently used apps list at the bottom. Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
Wait a 3-5 minutes.
Try your phone again and see if it's fixed.

Not showing Caller Name on E51

I have upgrade software but after that my phone not showing caller name on the screen.Before upgrading my phone was shwoing caller name when I received call. my all phone numbers are on SIM , can some body let me know how this will work or its setting.

The problem may be, that you have all your contacts on the SIM card and on the phone as well. Is that possible?
Duplicate matches for a specific phone number lead to not showing a phone number at all...
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

My iPhone 5 does not show caller name even though the number is saved with a name in contacts

My iPhone 5 does not show caller name even though the number is saved with a name in contacts

Contact your carrier. Caller ID is a carrier feature.

Can not add domain name Error Protected word / inappropriate language

Can not add domain name Error Protected word / inappropriate language
Provide your Domain name :
pragatiassociates.com
Nature of Services provided: It located in India, Punjab. Its a new firm which will be focus on supplying products to Educational Institutes in and around Punjab
Problem: While trying to register domain on domains.live.com it gives error that it contains a protected word or inappropriate language.
The website is first phase version page has been hosted. Domain was purchased on 1-Mar-2014. Please help on priority as I need the mail solutions at the earliest.
Posted query on Microsoft answers no reply even after 4 days.
http://answers.microsoft.com/en-us/outlook_com/forum/oadmincenter-ocustomdom/can-not-add-domain-name-error-protected-word/1322a218-3ad2-451c-a774-ae700465f9c4?tm=1394076201617

Saurav S --
Does your post have anything to do with Project Online, an enterprise project management application? If so, please elaborate. If not, please repost your question in a more relevant user forum. Hope this helps.
Dale A. Howard [MVP]

E52 not showing contacts name in inbox

Hi,
iam facing this problem of my e52 not showing contacts names in inbox.
Some of the contacts name are shown, those which was originally in my phone memory.
because i do a lot of trading, i constantly adds new numbers to my contacts from the sms they sent. But the main problem is here is even after i added their contact giving them names, the names doesnt show up in inbox, its still just numbers.
desperately need help for this. how can a business phone have this kind of problem?
Solved!
Go to Solution.

This happens to me too when I store the number under two names, or the synchronization creates double entries, for example:
Two names:
1234 Anna
1234 Bea
Double entries
1234 Anna
1234 Anna
When the text message comes in, there's no name. But you can send a message either to Anna or Bea and the message outbox shows the proper name.
The solution is to delete one entry or merge the duplicate contacts.
Hope this helps.

On OS 5, the contacts with international format do not show the names when they call me. any idea why?

I have updated my Iphone 4 software to OS5, and since then the names of the people who call me stopped to appear and only their number is showing. after checking, i found out that the contatcs whom local phone number is saved in an international format are affected by this problem. if i save them without the country code, then their names appear.
Also, some non local numbers that are saved in the format of 00966--------- instead of +966 ------- are also not showing the name of my contact when they call me.
any idea about this knowing that the older OS version didn't have an issue with this?
Thanks

This is the same problem I have. I thought it was my phone only, but now I realize it is a common thing. I hope they release a fix to this, as they did in 2007 & 2007 when 3G was released. Will be waiting and good luck to us all.

BPEL Console URL shows "HTTP 404 Not Found Error"

Hi guys,
Application server is running fine.
But the BPEL console, ESB and any other Middleware tools are showing same "The Webpage cannot be found" error.
Plz help me debug this.
Thanks in advance

thanks for replying,
Yes, all middleware applications show status of up and running.
But none of web module other than middleware, run could test for any application.
But http_server and other instances are all fine.

SOA Suite 10.1.3.4 BPEL Console not working after install the mlr#4 patch

After install the mlr#4 patch for 10.1.3.4 version the BPEL console dos not work. The BEPL is up and running , I can deploy projects, all domains are fine and working (I see on the logs) but the console show the following error:
Oracle BPEL Process Manager Full Cycle
An unexpected error has occurred while executing your request. This is most likely related to a defect in the Oracle BPEL Process Manager product. We apologize you can post the error to the OTN forum and we will get back to you as soon as possible.
Build Information:
Oracle BPEL Server version 10.1.3.4.0
Build: 0
Build time: Sun Jan 11 19:33:46 PST 2009
Build type: release
Source tag: PCBPEL_10.1.3.4.0MLR#4_GENERIC_RELEASE
Exception Message:
javax.servlet.ServletException - com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
When I check the log I can see this:
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2009-01-26T16:18:33.115+02:00</TSTZ_ORIGINATING>
<COMPONENT_ID>j2ee</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>soasit.BCR.WAN</HOST_ID>
<HOST_NWADDR>172.19.128.128</HOST_NWADDR>
<MODULE_ID>security</MODULE_ID>
<THREAD_ID>15</THREAD_ID>
<USER_ID>oracle</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>1232979513:172.19.128.128:4415:0:247</UNIQUE_ID><SEQ>1</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>ServletException cause</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
     at com.oracle.bpel.client.util.ExceptionUtils.handleServerException(ExceptionUtils.java:91)
     at com.oracle.bpel.client.BPELProcessHandle.getMetaData(BPELProcessHandle.java:236)
     at _ngDeployedProcesses._jspService(_ngDeployedProcesses.java:118)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_include(ServletRequestDispatcher.java:160)
     at com.evermind.server.http.ServletRequestDispatcher.access$000(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$1.oc4jRun(ServletRequestDispatcher.java:97)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
     at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:102)
     at com.evermind.server.http.EvermindPageContext.include(EvermindPageContext.java:456)
     at _index._jspService(_index.java:104)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
     at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:230)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.handleNotFound(HttpRequestHandler.java:1042)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:911)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
     at java.lang.Class.getMethod(Class.java:1581)
     at com.evermind.server.ejb.interceptor.MethodStateFactory.createMethodState(MethodStateFactory.java:112)
     at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.createMethodStates(ExposableBeanDescriptor.java:657)
     at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getRemoteComponentMethodStates(ExposableBeanDescriptor.java:723)
     at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getMethodState(ExposableBeanDescriptor.java:599)
     at com.evermind.server.ejb.AbstractEJBObject.OC4J_getMethodState(AbstractEJBObject.java:385)
     at ProcessManagerBean_RemoteProxy_4bin6i8.getMetaData(Unknown Source)
     at com.oracle.bpel.client.BPELProcessHandle.getMetaData(BPELProcessHandle.java:232)
     ... 52 more
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
If I rollback the mlr#4 , everithink works fine. With mlr#3, mlr#2 the problem is the same.
The platform is one for development installer on RedHat 5 OS.
Any ideea ?
Edited by: [email protected] on Jan 26, 2009 4:34 PM

Man Christian!
1000 Thanks for your tip. I run into same issue on W2K3 with 10.1.3.4 MLR#4 (so far last MR allowed for AIA apps).
I had the orabepl.ear file of the size as was mentioned earlier: 2.530.260 in the bpel\system and other one on the j2ee\ocj4_soa\applications folder.
Copying did not help.
I had to perform following steps from the <MLR#4>/custom/scripts/post.bat file which takes the file from the bpel\system,
ADDS some another .jars in it and ONLY THEN move it to the j2ee\...\applications folder:
copy %ORACLE_HOME%\bpel\system\j2ee\orabpel.ear %ORACLE_HOME%\bpel\system\services\lib\orabpel.ear
copy %ORACLE_HOME%\bpel\system\j2ee\ejb\oc4j_ejb_services.jar %ORACLE_HOME%\bpel\system\services\lib\ejb_services.jar
copy %ORACLE_HOME%\bpel\system\j2ee\ejb\ejb_ob_engine_oc4j.jar %ORACLE_HOME%\bpel\system\services\lib\ejb_ob_engine.jar
cd %ORACLE_HOME%\bpel\system\services\lib
%ORACLE_HOME%\jdk\bin\jar -uvf orabpel.ear ejb_services.jar ejb_ob_engine.jar
After doing manually these steps the orabpel.ear in j2ee\...\applications has got the size: 2.798.840 which was bigger as right after patch application.
Then I deleted the orabpel folder from the j2ee\...\aplication-deployments
started the j2ee containe (it was named: oc4_soa ) and the BPEL Console started live well as before in 10.1.3.3
As I did verify from other files The rest of steps from the post.bat file seems did well, only this part was not executed.
With Best Regards,
Alexey

Oracle SOA Cluster Topology: BPEL Console not working

I have installed Oracle SOA Environment with the cluster topology(Hosts 3, Application Servers 3, OC4J Instances 4, HTTP Server Instances 1).
Host1: HTTP Server, Host2: OC4J(Cluster1), Host3: OC4J(Cluster2). Cluster1 and Cluster2 are connected to the same database.
BPEL Console is working fine with Host1 and Host2, and I am able to deploy and execute the processes. But when I bring up the Host3, I am getting the following error.
----------------BEGIN ERROR--------------------
Cannot fetch a datasource connection.
The process domain was unable to establish a connection with the datasource with the connection URL "jdbc/BPELServerDataSourceWorkflow". The exception reported is: Listener refused the connection with the following error:
ORA-12516, TNS:listener could not find available handler with matching protocol stack
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=tcp)(HOST=01hw085593)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=XE)))
Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that the datasource connection parameters (user/password) is currently valid.
--------------END ERROR------------------------
Please help me in this regard.

Did you install SOA Suite on the cluster according to the documentation?
http://download.oracle.com/docs/cd/B31017_01/core.1013/b28941/soa.htm
Marc

IMessage not showing contact names

I just recently downloaded and installed OS X Mavericks on my 2011 iMac and trying to get up and running with the new iMessage app. But there are two major bugs I can figure out how to fix if anyone can help me fix these problems or comment if your having the same issues that would be a big help.
1: When receiving a message from someone in my contacts list/address book, their names do not apper next to the message, but rather only their phone numbers. I have went thought the view options and selected show contacts name and also tried adding a name to the existing number with no results. Does anyone know how to fix this bug?
2: The lag time between SMS/iphone messages and the time it takes to show up in iMessage on my mac is rather long. There is about a 3 minute delay before the text message conversation shows up from my phone to computer. Any suggestions on how to fix this?
Thanks

Hi,
Re 2).
This is a bit of a "known Issue" with no current fix.
The issue is related to the fact a iOS device seems to get the "first " push of the iMessage and that the Mac only gets "Sync" push which seems to be slower (and for some bizarre reason not always in order)
Re 1) I have seen this reported but maybe not as clearly as your post.
No-one seemed to make it clear the Contacts were in the Address Book (Contacts app) and that it seemed to be ignoring the Names for just the Numbers.
Obviously you can use the View Menu > Messages > Show Pictures and Name (or Show Names)
As you say this should link the ID or iPhone Number being used in the iMessages to the "Real Name" in the Address Card for that person.
The options are:-
A) You are receiving an iMessage from an iPhone Number but the link to the Address Card is not working.
If you make sure you are sending to an Apple ID what do you see ? (Apple ID or Real Name or in fact the iPhone number again)
This may be because you have lost the ability to "read" the saved data for the Contacts app.
B) Check the Contacts app and see if it is Syncing properly with any iOS device (i.e that all items have the Name as well as an iPhone number in the Address Card.)
10:32 pm Thursday; November 7, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Bpel console not showing domain name

Similar Messages

Maybe you are looking for