BPEL processes not showing up in the Enterprise Manager

We're having a serious problem with our BPEL processes. When we click on the initiate tab in the BPELConsole for each of them they give us the error message:
An Error Occured :
Failed to read WSDL from http://testserver:8888/orabpel/mydomain/TestProcess/1.1/TestProcess?wsdl:WSDL not found
When we look in the Enterprise Manager and go to the Web Services tab for the "orabpel" application we don't see any of our processes like we used to. When we deploy new processes the same thing happens -- their wsdls are unreachable. When we type the wsdl location into browser bar it gives us this error message:
there is no WSDL associated with the provider: BPEL_OC4J_SOAP_Provider
Any help would be greatly appreciated.

I ran into a BPEL_OC4J_SOAP_Provider error today and it was related to my proxy. The proxy on my local machine with JDeveloper would allow a WSDL with an unqualified name through. For instance, the machine kronos:7779 would validate, compile, and deploy from my machine. But looking up the WSDL on the server would produce the above described error. When I changed the name of the server to kronos.whatever.com:7779 it worked as expected on the server.

Similar Messages

Manually Installed Agent is not showing up in the Operations Manager Console Under Pending Management.

Hi Community,
I submitted this question because I'm a bit stuck with SCOM 2012 R2, I'll try to explain briefly what is happening right now in my environment, we have a DEV SCOM Deployment in which all the roles are installed in a single server, this servers is a
VMware machine running Windows Server 2008R2.
The Initial installation of the SCOM Operations Manager and all the other components was not performed by me but by a co-worker, unfortunately he doesn't remember much about the initial configuration. So i had to pickup where he left things about a year
ago, neither of us are SCOM experts, and we have almost no previous experience with previous versions of this application.
Now the problem that I'm facing is the following, all the DEV Servers are Domain Controllers and one of the indication within the "Guide for System Center Management Pack for Active Directory for Operations Manager 2012" states the following
Configuration
Supported?
Agent-less monitoring
No
After my first review I notice that our servers were being monitor by agent-less mode and given the above statement from the Operations Guide the only way that we could ever get those domain controllers monitor by SCOM would be by installing the agent on
each server, so I read somewhere (Can't remember where) that in order to install the agents in all the servers I should first remove them from the Agent-less node, which I did. Then I tried to use the discovery wizard to get the agent install in all of them
but it didn't matter how many times I try the servers never show up.
I read in a Tech Net Article that you had to modify the security settings so SCOM would let me decide if I wanted to approve it or not.
--> http://technet.microsoft.com/en-us/library/hh212853.aspx
I performed the suggested steps from the article but still the servers were not showing up, not even if I run the Discovery wizard, so I decided to go and perform the installation manually in a couple of servers I was able to install the agent in one of
the Domain Controllers, I configured the agent to use a service account that has Domain Admin rights. An hour after I installed the agent I went back to the Operations Console Manager and I check under Pending Action but the Server was not showing up. So i
went back to the Internet to try to find out if someone else had experience the same problem, and in one website some mentioned that if the servers were not showing up it was probably because they were still register in the SCOM Database, now I have no idea
of how i can check that or How can i remove them from there to have them available again, but what troubles me the most is that even after i installed the agent manually the server were not being recognize.
I went to the Event Viewer and I found one particular event that caught my attention, see below :
Log Name:      Operations Manager
Source:        Health Service Modules
Date:          6/12/2014 12:48:19 PM
Event ID:      11551
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      MyManagementServer
Description:
Computer verification failure for Machine Name: MyManagementServe is 0x800706BA. The RPC server is unavailable.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Health Service Modules" />
    <EventID Qualifiers="49152">11551</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-12T16:48:19.000000000Z" />
    <EventRecordID>1945680</EventRecordID>
    <Channel>Operations Manager</Channel>
    <Computer>MyManagementServer</Computer>
    <Security />
</System>
<EventData>
    <Data>MyManagementServe</Data>
    <Data>0x800706BA</Data>
    <Data>The RPC server is unavailable.</Data>
</EventData>
</Event>
Not sure if this is related to the problem that I'm facing right now, but , I make sure that the RPC Services were running and also the related dependencies too. There's no Firewall enable in any of the servers and DNS seems to be working properly.
Ports 135 / 5723 are open and listening so since I ran out of ideas, I would like to know if some of the experts in this field could perhaps give me some guidelines.
There's one caveat that I haven't mention yet and that is related to SQL, I checked and my user just has read access to SQL i'm not sure if that could affect this but i think is worth mentioning.
My main goal is to have all the servers showing up in the Operations Manager Console.
So thanks all in advance !
Oscar Loria

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Deployed processes not showing in BPEL Console

I am working on a processes that uses AQ to interface with a Oracle back end application.
It seemed to work fine, but from a certain moment on it didn't pick up any messages that were qeueued. Except for the first instance of the process. Though the monitor showed it waiting for the response, the process had actually received the response and had proceeded with the next step (in which a file was written to a directory, as I could see). Then it stopped. All subsequent processes stopped after queueing an input message.
After stopping and starting the BPEL Process Manager and OC4J container things went from bad to worse. Now none of the deployed processes are visible in the monitor. However, if I look at a previous instance of a process, it does show up on the dashboard.
I've had a look at the application log of the orabpel OC4J application and it shows a lot of errors (of the same sort) since BEPL Process Manager was stopped. Restarting the Application Server didn't help.
This is the error I'm getting:
05/12/19 14:55:19 MessageDrivenHome::run: dequeue FAILED; attempting to re-acquire JMS session for blocking receive
05/12/19 14:55:19 MessageDrivenHome::run: retry_cnt=0 this.dequeue_retry_cnt=0 this.dequeue_retry_interval=60
Does anybody have a clue about what is wrong?

Some more info on the problem:
I took one of the application servers out of the cluster and began working on it in a standalone state.
The Setup, OracleAS Middle Tier with BPEL:
1. The Application server sits on an internal network that has access to the outside world but restricted incoming access.
2. There is an Apache server running mod_proxy that acts as a reverse proxy for all requests to http://workflow/. http://workflow/ connects the requests to http://servername:7797/, where BPEL is running.
This works to get connectivity to the Application Server. We want the WSDL Location to start with http://workflow/ insead of http://servername:7797/ so we can eventually use a clustered load balancing environment.
I found out that the processes are not showing up in the BPEL Dashboard when I change, soapCallbackUrl and soapServerUrl to http://workflow/. They will not show up until I actually navigate to the WSDL file using teh http://workflow beginning. After which they show up in the BPEL Dashboard. However, on a OC4J_BPEL restart they all disappear again.
Everything works if I use the http://servername:7797/ beginning for WSDLs, but this will not work for the overall implementation.
How can I change soapCallbackUrl and soapServerUrl to http://workflow and still use the BPEL Dashboard?

Bpel is not showing all DEPLOYED bpel processes

Hi,
The data is not transfering after refresh the instance.When i click tab BPEL processes it is not showing all DEPLOYED bpel processes it shows only two process that is
TaskActionHandler
TaskManager
Thanks
Edited by: userpat on May 24, 2010 7:09 AM
Edited by: userpat on May 24, 2010 7:11 AM

The issue is resolved as below.
Change the directory to the dir of individual process suitcase dir and run the bellow command
$ORACLE_HOME/bpel/bin/bpelc.sh -rev 1.0 -deploy default

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

BPEL processes not available on BPEL console when deployed from JDeveloper

Installation: SOA Suite 10.1.3.4 (Upgraded through patch) (Standalone OC4J)
When I deploy the BPEL processes through JDeveloper, they do not show up in the BPEL console. JDeveloper does not display any error message but in fact displays successful deploy. I am able to manually deploy processes from the BPEL console itself or by dropping in the BPEL suitcase in the deploy directory.
I noticed this issue when I tried installing AIA foundation pack 2.4. The installation showed the message below -
Failed to read wsdl at "http://AMVAIDYA-US:8888/orabpel/default/AIAErrorTaskAdministrationProcess/AIAErrorTaskAdministrationProcess?wsdl", because "Failed to read WSDL from http://AMVAIDYA-US:8888/orabpel/default/AIAErrorTaskAdministrationProcess/AIAErrorTaskAdministrationProcess?wsdl:WSDL not found".
Make sure wsdl is valid. You may need to start the OraBPEL server, or make sure the related bpel process is deployed correctly.
[Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
I noticed that issue is independent of AIA since I cannot deploy any BPEL process through JDeveloper (or even through using the ant deploy in JDev)
Please help!
Thanks
Amol

I did try the verbose=true option but there are no errors there. The ant deploy task shows up as successful just like it shows from the right click -> Deploy to domain on the BPEL project. I created a sample async BPEL for this - it has just one assign activity with some dummy values for output. It builds fine. If I deploy the jar file created from this manually in the console it works. But it doesnt work from JDev or Ant. Is there anything I missed during the upgrade patch from 10.1.3.1 to 10.1.3.4? I did execute all the post and pre install tasks (including the orabpel, oraesb schema updates etc)
FYI, I can register an ESB from JDeveloper and it shows up in the ESB console.

Re: Asynchronous BPEL process not invoking in solaris

I am also facing Similar Issue on SOA Cluster Environment on Linux platform. For me the Processes were working. Now the simple Asynchronous BPEL is not getting invoked in the Same Environment. The same composite is working in other environment. I looked at log file but not getting much of information to fix the issue. I am getting below exception in log file.
FINEST: MonitorConfigInfo.getConfigDocument Cannot find / parse monitor.config. Exception: oracle.fabric.common.FabricException: Error in getting XML input stream: monitor.config: Error in getting XML input stream: monitor.config: Error in getting XML input stream: oramds:/deployed-composites/default/SampleTestProc_rev1.0/monitor.config: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/deployed-composites/default/SampleTestProc_rev1.0/monitor.config does not exist.
FINEST: MonitorConfigInfo.<init> Cannot find / parse monitor.config. Set enabled flag to false.
Composed "SampleTestProcess" in 2.5 milliseconds [nodes 6=0+6, 2,440.0 nodes/sec]
Compiled "SampleTestProcess" in 327.6 milliseconds
Gathered 3 files in 0.3 milliseconds
Packaged "SampleTestProcess" in 2.9 milliseconds
====> CubeEngine load SampleTestProc/SampleTestProcess took 484 ms
java.lang.Exception: Stack trace
     at java.lang.Thread.dumpStack(Thread.java:1206)
     at oracle.integration.platform.blocks.soap.FabricProviderServlet$HttpServletResponseAdapter.setStatus(FabricProviderServlet.java:852)
     at oracle.j2ee.ws.server.WSDLPresenterBase.getOutputStreamWriter(WSDLPresenterBase.java:98)
     at oracle.j2ee.ws.server.provider.ProviderWSDLHandler.presentWSDL(ProviderWSDLHandler.java:103)
     at oracle.j2ee.ws.server.provider.ProviderServlet.presentWsdl(ProviderServlet.java:990)
     at oracle.j2ee.ws.server.provider.ProviderServlet.doGet(ProviderServlet.java:969)
     at oracle.j2ee.ws.server.provider.ProviderServlet.doGet(ProviderServlet.java:877)
     at oracle.integration.platform.blocks.soap.FabricProviderServlet.doGet(FabricProviderServlet.java:332)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3723)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3689)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2285)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2184)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1459)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

Hi,
1. Make sure the soa-infra application is UP and Running in EM
if Yes then try the following
2. verify the kernel parameters to allow more threads on linux server. http://www.oracle-base.com/articles/11g/oracle-db-11gr1-installation-on-enterprise-linux-4-and-5.php
Same applies for Application server as well but it is not documented.
3. verify you have read write permissions on the folders where process is looking for files or generating logs etc etc...
Zeeshan

Ipod Not Showing Up In The List In Itunes

Hey, ive had problems with my ipod lately. basically when ever i plug my ipod into my computer, it appears in mycomputer and itunes also opens. i have run the diagnostic in the help menu in itunes and it is detecting my ipod HOWEVER it will not show up in the list on the right hand side!!!! I have tried all the things suggested by apple such as reinstalling and many other things like ending the process etc. no luck.. plz help!

Have you tried simply resetting hte ipod while it's connected to the PC?
If that doesn't help, here is an article with a long list of other stuff to investigate.
http://support.apple.com/kb/TS1369
You need to expand each link and read all the stuff. For example, under
"Connect iPod to a high-powered USB port"
the 4th line down says
+If the issue persists, try disconnecting other USB devices from the computer such as printers, cameras, scanners, external hard drives, and USB hubs to determine if there is a conflict in the USB chain.+
That is a step you wouldn't want to skip, as it can really narrow things down.

Sales Order does not show up at the resource level.

Hi guys,
I have a flour mill of having 4 processs (resources)
1). Tempering (cleaning).
2). Milling.
3). Blending.
4). Packing.
I have two identical sales order. One has been through all the process (resources) and showed in the DS Planning board but, other one has not shown up there. It happens to me couple of times that such sales order do not show up at the resource level. Where should I check and correct? Aslo which way can I follow up these missing sales order? and What shoud I do if this situation happens?
Thanks
Shaan.
Edited by: Shaan313 on Sep 27, 2011 8:22 PM

313,
https://service.sap.com/sap/support/notes/1406120
Since you asked the question, I can assume that you don't have an "S" number. speak to the person in your company who administers your SAP Service Marketplace account (this is usually someone on your Basis team), who can obtain one for you.
Or, you can try on your own. A few stars have to be in alignment for the second method to work.
https://service.sap.com/request-user
Best Regards,
DB49

Some email images do not show while using the icloud web app. I can see the images on my IOS devices and in gmail but I only see a small gray box in the icloud web mail app. Load HTML images is checked in preferences.

Some email images do not show while using the icloud web app. I can see the images on my IOS devices and in gmail but I only see a small gray box in the icloud web mail app. Load HTML images is checked in preferences. Is there a solution to this issue?

I've seen the opposite issue. My wife recieved an email with jpg attachments. She couldn't see or print them on her iPhone 4S but they showed up fine in iCloud or in the mail app. I had her forward the email to herself and then they showed up. I assume there is an issue with how Apple is processing the attachments and resending causes them to get reformatted in a way that makes them easier to handle.
So yeah. Seems like some bugs. Hope Apple fixes them soon.

Added fields does not show up in the RSA6

Hello.
Problem 1:
I am enhancing 0bbp_td_sc_1. I added a field to the structure, but it does not show up in the rsa6. ( I double clicked on the extractor name). If I go to the extractor structure (BBP_SC_BW_GET_TD_STRUC), I am able to see the append. The structure is activated. The append structure is also activated (Zabbp_sc_bw_get_td_struc).
What can be wrong? I did not see the added the field in the ROOSFIELD table either.
Problem 2: What is the difference If I populated the field value from RSU5_SAP_BADI to the rsap001 user exit EXIT_SAPLRSAP_001?
I am not able to run debug RSU5_SAP_BADI. STOP does not stop. While I debug, I am able to see the field ( The field I added from problem 1). But the value never populated.
I am able to run the debug for EXIT_SAPLRSAP_001. I see the data populated for the field. But in RSA3 result, I am not able to see it.
Thanks in advance.

Hi
1. this is usualy the case if the append struct is not active or you did not add the new fields in the append struct.
I would suggest to remove the fields save activate and re do the process making sure you either use an existing append struct or create a new one.
2. BADI are different then UE in the way they are implemented. I will recommend using UE.
You will not see the enhanced fields in the out put of RSA3 so I stop on the last line and check the values in the struct.
to debug I would either go to the UE (in a different session) and put a break point there and run RSA3 or check the debug in RSA3 and then find the SAPEXIT that calls the UE.
I hope this helps.
Reg's
Edan

RE workflow type is not showing up in the Request type list in AE

Hi,
I had appended the AE_init_append_data_RE.xml file in the Configuration->Initial System Data.
Even after appending this file , the RE workflow type is not showing up in the AE Request type list.
Please guide me.

Hi All,
Thanks for ur inputs. It is working now. I could see all the workflow types after appending the two files
1. AE_init_ append_data_RE.xml
2. AE_init_ append_data_CC.xml
I have created
1. Initator with workflow type RE using Request type and priority -RE_HIGH as attributes
2. CAD by giving webservice URL.
3. Configured workflow with one stage.
Now, if I process a request in RE I am getting an error "ERROR IN CREATING REQUEST". What may be the problem..? I am happy to receive your suggestions.
Thanks

HT201272 Why all my previous downloaded apps (free or paid) suddenly not showing up on the iTunes store "purchased" section. Every time I select "purchased", the next screen shows "no purchased app available for downloaded"?? Please help!!

Why all my previous downloaded apps (free or paid) suddenly not showing up on the iTunes store "purchased" section. Every time I select "purchased", the next screen shows "no purchased app available for downloaded"?? It is the same on my iphone4 or ipad 2!! Please help!!

Dear Metal Wheels and King Penguin.
I have to actually same problem today 23.10.2012. For an example I have only changed billing methods and have bought hundreds of apps but I remember clearly that I bought for an example ,,Wikipanion Plus'' and ,,OPlayer'' which is now HD OPlayer and I did not see them in purchased items, neither ,,not on ipad/iphone'' nour ,,not on my computer'' and I check in both my computer. I confirm hereby that I took the chance to re-buy these two Apps again through the same account but I got the message ,,As you have bought the previous version on this account you will get this update for free'' so I clicked yes and I got them both. This doesnt only proof that I have purchased them before and purchased items in iTunes Store has some lacks to fix but also it proofs that I also bought them through that specific account as I had to confirm the buying process. In my opnion this is not a thing which Apple should be relaxed with as its very important that powerusers and regular consumers can trust and rely on doing business and to shop via iTunes. I have a lot of expensive Apple Hardware and for me this is a stepping stone and a serious test on the circle of trust. If this cant be fixed I cannot recommend others to trust the store.
Best Regards, davidtryggva

HT4314 I have an IPhone an IPad1 and and IPod. The game center on the IPod will not show any of the games. Can anyone help with this?

I have an IPod touch 4.2 and the game center is not showing any of the games. My Ipad1 and IPhone are running from the same account and both work great. Any suggestions how I might solve this? Thank u

I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414). You will be given the option to restore to that backup at the end of the restore process. Your messages are stored in the backup so restoring to the backup will return the messages to your phone. Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process.

My downloaded text sounds do not show up under the sounds tab in settings after installing 8.1.1. can someone help me please?

i downloaded a couple text tones and since installing 8.1.1, they will not show up under the sounds tab. in fact, they do not show up in my recent purchases on itunes, but when i go to buy them again, it says that i have already bought this tone. I just want to use the tones i paid for as the tones on my phone. not asking much.... thanks for the help. i hope someone can help me get the tones working. thank you.

This was happening to me too but only for some of my songs. I have a mac so I dunno about PCs, but for most of my ringtones I had to create an ACC version in itunes to make them short enough then turn that into a m4r and those all worked fine. But if the song was already short enough and I didn't create an ACC version and just turned the original into a m4r, then it wouldn't appear in my itunes.
so if you're on a mac:
1. go to get info, options, pick when you want the song to start and end.
     Has to be pretty short to work, 30 second or less is good
     if it's already short enough that's fine
2. right click and click 'create ACC version'
     a copy with the length you put in will appear, drag that into a folder or whatever and just type in m4r where m4a would be
     still make an ACC version even if it's the right length
Hopefully this helps someone else.

BPEL processes not showing up in the Enterprise Manager

Similar Messages

Maybe you are looking for