BPEL wsdl customisation throwing Error -- Bug?

Hi guys,
I observed something strange in BPEL's behaviour.
I made a synchronous HelloWorld/Echo service, accepting default schema. the BPEL wsdl is create with default "process" operation and "payload" message part.
I changed the wsdl to reflect operation as "CustomMethod" and message part to be "random" and made relevant changes in BPEL as well . On redeplying, i am unable to invoke from console. It's giving me error:
The following exception occured while processing this request:
Failed get operation definition.
Failed to get the WSDL operation definition of "CustomMethod" in portType "{http://xmlns.oracle.com/HelloWorldBPEL}HelloWorldBPEL".
Please verify that operation "CustomMethod" is defined in portType "{http://xmlns.oracle.com/HelloWorldBPEL}HelloWorldBPEL".
Am i missing something or is this a probable bug ?

Did you tried undeploying the old helloworld and redeploy the new one.
Sometimes this occures overhere because of old wsdl cache

Similar Messages

SOA WSDL operation throws errors with FlashBuilder4.6...

hi guys,
I developed soa cpmposite with bpel process having two operations....
I successfully deployed it and working fine with vordel soap box and soapUI....
I am getting error while I am trying to access the same WSDL with Flash Builder 4.6 and getting following error as response....
Non Recoverable System Fault :
faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure} messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
Error Message: {http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure
Fault ID default/LoadMinMax1!1.0*soa_411d1cc2-9788-455d-96e5-3d850f5884d9/LoadMinMax1/120212-BpAss2-BpSeq2.7-1
Fault Time Oct 21, 2012 11:05:24 AM
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"></selectionFailure></bpelFault>
FlasBuilder Error
InvocationTargetException:There was an error while invoking the operation. Check your operation inputs and try invoking the operation again.
Response Received:
env:ServerfaultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure}messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
i gave proper inputs of complex type in following format
inputvariable:"inputdata"
please give some light on this issue...
Regards,
jdev

yes vlad,
I observed payload difference and Flash builder is changing some namespaces /variable names when it invokes the service..please see both payloads....
FlashBuilder
=====
<inputVariable1>
<part name="payload">
<q0:getDailyLoad>
<q0:todaydatetime>2012-10-22 10:34</q0:todaydatetime>
</q0:getDailyLoad>
</part>
</inputVariable1>
SoapUI
=======
<inputVariable1>
<part name="payload">
<load:process1>
<load:todaydatetime>2012-10-22 10:43</load:todaydatetime>
</load:process1>
</part>
</inputVariable1>
SoapUI is working fine.....
How can we clear the payload difference.....
Regards,
jdev

BPEL...... On Alram Branch not throwing error after the set time

Hi,
In SOA 10.1.3.4 BPEL process , i have a asynchronous process which Invokes a Partnerlink and waits in the Recieve Activity. The OnAlarm branch set here waits for 2 hrs, after which the scope throws that Global fault.
I have observed that for some instances, the OnAlarm Branch does not throw error even after about 24 hrs ( though the OnAlarm is set to 2 hrs )
Is this a prodcut defect or something to do with thread level issues ?
Thanks & Regards,
Md Yaqoob.
Edited by: Sam9999 on Oct 6, 2010 5:33 PM

Hi,
We did not talk to Oracle last week, but hope to do so this week via web conference. According to Oracle support, the version and patch level we are on should not have the problem we are encountering. Both the Oracle constant and support have been unable to replicate the error when they attempt to recreate our setup on their own servers.
We can produce this issue 100% of the time, on a server with no load at all. it is a brand new environment for development use to which we have deployed the latest versions of our flows. I have deployed a simple flow containing just a Wait 15 minutes, and any instances in flight when I restart BPEL do not wake-up on time. Very occassionally, instances that previously failed to wake after a restart do wake after subsequent restarts, but that is not 100% of the time.
Hope to conference with Oracle on Wednesday.
Anit

[svn] 1338: Bug: BLZ-123-Attempting to use a channel that doesn' t support messaging (AMFChannel/AMFEndpoint withtout polling enabled) should throw error

Revision: 1338
Author: [email protected]
Date: 2008-04-22 07:45:18 -0700 (Tue, 22 Apr 2008)
Log Message:
Bug: BLZ-123-Attempting to use a channel that doesn't support messaging (AMFChannel/AMFEndpoint withtout polling enabled) should throw error
QA: Yes
Doc: No
Details: Added logic in Consumer such that when the Consumer is connected over a non-realtime channel (i.e. non-polling and non-streaming channel), a warning is logged to let the user know that channel is not going to automatically receive updates via client poll or server push. We can't really throw an error here because one might want to disable channel polling and manually send poll requests when needed and this is a valid configuration as well.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-123
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/projects/rpc/src/mx/messaging/AbstractConsumer.as

Thanx Mete, yeah i did...
but i solved it some other way... not entirely sure this was
it though as i was doing a lot of things at once...
it was fds.swc... possibly it was out of date or missing.

[svn:fx-trunk] 9284: Fix bug: Spark BasicLayout should throw error/ RTE when setting useVirtualLayout

Revision: 9284
Author:   [email protected]
Date:     2009-08-13 15:33:07 -0700 (Thu, 13 Aug 2009)
Log Message:
Fix bug: Spark BasicLayout should throw error/RTE when setting useVirtualLayout
QE notes: None
Doc notes: None
Bugs: SDK-22211
Reviewer: Hans
Tests run: checkintests, gumbo/core/Group, gumbo/core/DataGroup, gumbo/core/List
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22211
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/bundles/en_US/layout.properties
    flex/sdk/trunk/frameworks/projects/spark/src/spark/layouts/BasicLayout.as

This bug figures out also when creating a custom spark ComboBox, then trying to programatically update the userProposedSelectedIndex property. The proposed selected index is selected, but does not apply the same skin as when mouse is on rollover or item is selected due to up and down keys.
The issue seems like updating the status of the item renderer to rollover or selected to get the same skin applied.
Please could you attach DropDow nList.as that you edited ?
Thank you so much.

Unable to import BPEL wsdl in PeopleSoft ?

We have installed Oracle AS 10.1.2 on a LINUX server and deployed few BPELs there. I am trying to import BPEL in PeopleSoft Financials 8.8 using Integration Broker Import WSDL utility.
Its throwing following error message
java.lang.StringIndexOutOfBoundsException: String index out of range: -7
     at java.lang.String.substring(String.java:1480)
     at psft.pt8.pshttp.PSHttp.getCookies(PSHttp.java:455)
     at com.peoplesoft.pt.integrationgateway.targetconnector.HttpTargetConnector.send(HttpTargetConnector.java:383)
     at com.peoplesoft.pt.integrationgateway.service.BasicConnectorInvocator.execute(BasicConnectorInvocator.java:120)
     at com.peoplesoft.pt.integrationgateway.framework.GatewayManager.invokeService(GatewayManager.java:130)
     at com.peoplesoft.pt.integrationgateway.framework.GatewayManager.manageRequest(GatewayManager.java:286)
     at com.peoplesoft.pt.integrationgateway.framework.GatewayManager.connect(GatewayManager.java:211)
     at com.peoplesoft.pt.integrationgateway.listeningconnector.PeopleSoftListeningConnector.doPost(PeopleSoftListeningConnector.java:123)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
and
Request Content could not be retrieved because of Exception:IBRequest:getInfoXMLString(). MessageName is a required field.
But I am able to import java webservice WSDL deployed on same server.
Moreover, I am able to import BPEL WSDLs deployed on a windows m/c.
Can somebody suggest a solution ?

I guess you guys are working peoplesoft vs BPEL, I need some help can you please help. Let me know if you are still watching this thread.

Siebel says Invalid BPEL WSDL

I have a WSDL created by BPEL and am trying to import it in Siebel. Siebel then throws errors. See below for errors and WSDL.
Can anyone help?
Siebel Errors:
Errors during processing:
There are no web service definitions to be generated.(SBL-EAI-04340)
Following are warnings generated in the process:
Service 'OutBoundDemoCallbackService' can not be imported, because none of its ports could be imported.(SBL-EAI-04333)
Port 'OutBoundDemoCallbackPort' can not be imported. The binding element 'http://xmlns.oracle.com/OutBoundDemo:OutBoundDemoCallbackBinding' is invalid.
(SBL-EAI-05153)
.The SoapOperation %1 does not have either an input or output SoapBody child.
Service 'OutBoundDemo' can not be imported, because none of its ports could be imported.(SBL-EAI-04333)
Port 'OutBoundDemoPort' can not be imported. The binding element 'http://xmlns.oracle.com/OutBoundDemo:OutBoundDemoBinding' is invalid.
(SBL-EAI-05153)
.The SoapOperation %1 does not have either an input or output SoapBody child.
BPEL WSDL
<?xml version="1.0" encoding="UTF-8" ?>
<definitions name="OutBoundDemo" targetNamespace="http://xmlns.oracle.com/OutBoundDemo" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://xmlns.oracle.com/OutBoundDemo" xmlns:wsa="http://schemas.xmlsoap.org/ws/2003/03/addressing" xmlns:ns1="http://www.siebel.com/xml/CSST%20Contact%20Interface" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:client="http://xmlns.oracle.com/OutBoundDemo">
<types>
<schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://xmlns.oracle.com/OutBoundDemo" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:client="http://xmlns.oracle.com/OutBoundDemo" xmlns:ns1="http://www.siebel.com/xml/CSST%20Contact%20Interface" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
<element name="OutBoundDemoProcessRequest">
<complexType>
<sequence>
<element name="input" type="string" />
</sequence>
</complexType>
</element>
<element name="OutBoundDemoProcessResponse">
<complexType>
<sequence>
<element name="result" type="string" />
</sequence>
</complexType>
</element>
</schema>
<xsd:schema xmlns:client="http://xmlns.oracle.com/OutBoundDemo" xmlns:ns1="http://www.siebel.com/xml/CSST%20Contact%20Interface" xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:import namespace="http://www.siebel.com/xml/CSST%20Contact%20Interface" schemaLocation="CSSTContactInterface.xsd" />
</xsd:schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://schemas.xmlsoap.org/ws/2003/03/addressing" schemaLocation="http://sgaur-us:9700/orabpel/xmllib/ws-addressing.xsd" />
</schema>
</types>
<message name="WSAMessageIDHeader">
<part name="MessageID" element="wsa:MessageID" />
</message>
<message name="OutBoundDemoRequestMessage">
<part name="payload" element="ns1:SiebelMessage" />
</message>
<message name="WSAReplyToHeader">
<part name="ReplyTo" element="wsa:ReplyTo" />
</message>
<message name="WSARelatesToHeader">
<part name="RelatesTo" element="wsa:RelatesTo" />
</message>
<message name="OutBoundDemoResponseMessage">
<part name="payload" element="tns:OutBoundDemoProcessResponse" />
</message>
<portType name="OutBoundDemoCallback">
<operation name="onResult">
<input message="tns:OutBoundDemoResponseMessage" />
</operation>
</portType>
<portType name="OutBoundDemo">
<operation name="initiate">
<input message="tns:OutBoundDemoRequestMessage" />
</operation>
</portType>
<binding name="OutBoundDemoCallbackBinding" type="tns:OutBoundDemoCallback">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
<operation name="onResult">
<soap:operation style="document" soapAction="onResult" />
<input>
<soap:header message="tns:WSARelatesToHeader" part="RelatesTo" use="literal" encodingStyle="" />
<soap:body use="literal" />
</input>
</operation>
</binding>
<binding name="OutBoundDemoBinding" type="tns:OutBoundDemo">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
<operation name="initiate">
<soap:operation style="document" soapAction="initiate" />
<input>
<soap:header message="tns:WSAReplyToHeader" part="ReplyTo" use="literal" encodingStyle="" />
<soap:header message="tns:WSAMessageIDHeader" part="MessageID" use="literal" encodingStyle="" />
<soap:body use="literal" />
</input>
</operation>
</binding>
<service name="OutBoundDemoCallbackService">
<port name="OutBoundDemoCallbackPort" binding="tns:OutBoundDemoCallbackBinding">
<soap:address location="http://set.by.caller" />
</port>
</service>
<service name="OutBoundDemo">
<port name="OutBoundDemoPort" binding="tns:OutBoundDemoBinding">
<soap:address location="http://sgaur-us:9700/orabpel/default/OutBoundDemo/1.0" />
</port>
</service>
<plnk:partnerLinkType name="OutBoundDemo">
<plnk:role name="OutBoundDemoProvider">
<plnk:portType name="tns:OutBoundDemo" />
</plnk:role>
<plnk:role name="OutBoundDemoRequester">
<plnk:portType name="tns:OutBoundDemoCallback" />
</plnk:role>
</plnk:partnerLinkType>
</definitions>

Edwin (or anyone else),
We are also trying to invoke a BPEL process from Siebel and have read your advice in this thread.
We can successful consume a Synchronous HelloWorld process from Siebel, but it is failing with consuming an Asynchronous HelloWorld from Siebel.
This is a production project and while we are not concerned about callbacks with Siebel, it is not feasible to accept synchronous communications for this BPEL process as we cannot have Siebel waiting on completion - (HelloWorld is a cutdown use case produced to debug the issues we had with our real WSDL).
Do you have any advice on how we can bridge the issues and produce an asynchronous process that can be consumed by Siebel ? Is this an issue with WSDL conformity - we are using Siebel 7.7? Is there an issue with regard to the way Siebel and Oracle PM handle WS-Addressing ?
Mark.

PL/SQL throwing errors! trying to alter dates

the following code keeps throwing errors, I was wondering if it is due to me getting confused when to use ":" before a variable and also ":=" when setting values?
Can anyone see what I am doing wrong?
Here is the code, at the moment it is throwing an error on line 44
ORA-06550: line 44, column 1:
PLS-00103: Encountered the symbol "" when expecting one of the following:
CODE.....
DECLARE
 QNStart DATE;
 QNFinish DATE;
 Q1Start DATE;
 Q1Finish DATE;
 Q2Start DATE;
 Q2Finish DATE;
 Q3Start DATE;
 Q3Finish DATE;
 Q4Start DATE;
 Q4Finish DATE;
 Q5Start DATE;
 Q5Finish DATE;
 QNT NUMBER;
 Q1T NUMBER;
 Q2T NUMBER;
 Q3T NUMBER;
 Q4T NUMBER;
 QNR NUMBER;
 Q1R NUMBER;
 Q2R NUMBER;
 Q3R NUMBER;
 Q4R NUMBER;
BEGIN
 case current_date
 when current_date between to_date('01-JAN', 'DD-Mon') AND to_date('31-MAR', 'DD-Mon') then
 QNStart := to_date('01-JAN', 'DD-Mon');
 QNFinish := to_date('31-MAR', 'DD-Mon');
 when current_date between to_date('01-APR', 'DD-Mon') AND to_date('30-JUN', 'DD-Mon') then
 QNStart := to_date('01-APR', 'DD-Mon');
 QNFinish := to_date('30-JUN', 'DD-Mon');
 when current_date between to_date('01-JUL', 'DD-Mon') AND to_date('30-SEP', 'DD-Mon') then
 QNStart := to_date('01-JUL', 'DD-Mon');
 QNFinish := to_date('30-SEP', 'DD-Mon');
 when current_date between to_date('01-OCT', 'DD-Mon') AND to_date('31-DEC', 'DD-Mon') then
 QNStart := to_date('01-OCT', 'DD-Mon');
 QNFinish := to_date('31-DEC', 'DD-Mon');
 End Case
:Q1Start := ADD_MONTHS(:QNStart,-3);
:Q1Finish := ADD_MONTHS(:QNFinish,-3);
:Q2Start := ADD_MONTHS(:QNStart,-6);
:Q2Finish := ADD_MONTHS(:QNFinish,-6);
:Q3Start := ADD_MONTHS(:QNStart,-3);
:Q3Finish := ADD_MONTHS(:QNFinish,-3);
:Q4Start := ADD_MONTHS(:QNStart,-4);
:Q4Finish := ADD_MONTHS(:QNFinish,-4);
:Q5Start := ADD_MONTHS(:QNStart,-5);
:Q5Finish := ADD_MONTHS(:QNFinish,-5);
select COUNT(COUNT(*)) INTO :Q1T from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :Q1Start AND :Q1Finish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q2T from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :Q2Start AND :Q2Finish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q3T from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :Q3Start AND :Q3Finish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q4T from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :Q4Start AND :Q4Finish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :QNT from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :QNStart AND :QNFinish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q1R from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN Q1Start AND Q1Finish
AND a.COMPANY_NAME IN
 (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
 WHERE f.DATE_ENTERED BETWEEN Q2Start AND Q2Finish
 AND a.ACTION_SCORE = 'Y'
 AND f.INPUT_TYPE = a.ACTION_NAME
 GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q2R from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN Q2Start AND Q2Finish
AND a.COMPANY_NAME IN
 (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
 WHERE f.DATE_ENTERED BETWEEN Q3Start AND Q3Finish
 AND a.ACTION_SCORE = 'Y'
 AND f.INPUT_TYPE = a.ACTION_NAME
 GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q3R from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN Q3Start AND Q3Finish
AND a.COMPANY_NAME IN
 (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
 WHERE f.DATE_ENTERED BETWEEN Q4Start AND Q4Finish
 AND a.ACTION_SCORE = 'Y'
 AND f.INPUT_TYPE = a.ACTION_NAME
 GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q4R from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN Q4Start AND Q4Finish
AND a.COMPANY_NAME IN
 (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
 WHERE f.DATE_ENTERED BETWEEN Q5Start AND Q5Finish
 AND a.ACTION_SCORE = 'Y'
 AND f.INPUT_TYPE = a.ACTION_NAME
 GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :QNR from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN QNStart AND QNFinish
AND a.COMPANY_NAME IN
 (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
 WHERE f.DATE_ENTERED BETWEEN Q1Start AND Q1Finish
 AND a.ACTION_SCORE = 'Y'
 AND f.INPUT_TYPE = a.ACTION_NAME
 GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
EXECUTE
Cheers
Simon

Dave had given you already some good advice.
Your code is not only too complicated, but you have also probably a bug in it. You have for instance a QNstart as to_date('01.01, 'dd.mm') and a corresponding QNfinish as to_date('31.03', 'dd.mm'). As this means, it is the time portion at 00:01, you are missing the complete last day of this interval. So you better do:
declare
l_QNstart date;
l_Q1start date;
l_Q1finish date;
l_q1t number
begin
l_QNstart := trunc(sysdate, 'Q');
l_Q1start := add_months(l_QNstart, -3);
l_Q1finish := l_QNstart;
-- your condition is now
select count(count(*))
into l_q1t
from ff_actions f, ff_action_type_lov a
where f.date_entered >= l_Q1start and f.date_entered < l_Q1finish
and a.action_score = 'y'
and f.input_type = a.action_name
group by f.company_name;
end;
/Message was edited by:
Leo Mannhart
btw: what is the difference between Q1Start / Q3 Start and Q1Finish / Q3Finish resp.?

Unable to acess BPEL WSDL from OWSM Gateway

Hello all,
I'm trying to register a BPEL Process as a service on a OWSM gateway.
The BPEL WSLD is as follows:
<definitions name="WR01" targetNamespace="http://xmlns.oracle.com/WR01">
−
 <types>
−
 <schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://xmlns.oracle.com/WR01">
−
 <element name="WR01ProcessRequest">
−
 <complexType>
−
 <sequence>
<element name="input" type="string"/>
</sequence>
</complexType>
</element>
−
 <element name="WR01ProcessResponse">
−
 <complexType>
−
 <sequence>
<element name="result" type="string"/>
</sequence>
</complexType>
</element>
</schema>
−
 <xsd:schema>
<xsd:import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/WR01" schemaLocation="WR01.xsd"/>
</xsd:schema>
</types>
−
 <message name="WR01RequestMessage">
<part name="payload" element="ns1:Input"/>
</message>
−
 <message name="WR01ResponseMessage">
<part name="payload" element="ns1:Input"/>
</message>
−
 <portType name="WR01">
−
 <operation name="process">
<input message="tns:WR01RequestMessage"/>
<output message="tns:WR01ResponseMessage"/>
</operation>
</portType>
−
 <binding name="WR01Binding" type="tns:WR01">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
−
 <operation name="process">
<soap:operation style="document" soapAction="process"/>
−
 <input>
<soap:body use="literal"/>
</input>
−
 <output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
−
 <service name="WR01">
−
 <port name="WR01Port" binding="tns:WR01Binding">
<soap:address location="http://dcmsinusapp02.dc.local:7780/orabpel/default/WR01/1.0"/>
</port>
</service>
−
 <plnk:partnerLinkType name="WR01">
−
 <plnk:role name="WR01Provider">
<plnk:portType name="tns:WR01"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>
The WSDL generated from the service registation on the gateway is as follows:
<definitions name="WR01" targetNamespace="http://xmlns.oracle.com/WR01">
−
 <types>
−
 <schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://xmlns.oracle.com/WR01">
−
 <element name="WR01ProcessRequest">
−
 <complexType>
−
 <sequence>
<element name="input" type="string"/>
</sequence>
</complexType>
</element>
−
 <element name="WR01ProcessResponse">
−
 <complexType>
−
 <sequence>
<element name="result" type="string"/>
</sequence>
</complexType>
</element>
</schema>
−
 <xsd:schema>
<xsd:import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/WR01" schemaLocation="WR01.xsd"/>
</xsd:schema>
</types>
−
 <message name="WR01RequestMessage">
<part name="payload" element="ns1:Input"/>
</message>
−
 <message name="WR01ResponseMessage">
<part name="payload" element="ns1:Input"/>
</message>
−
 <portType name="WR01">
−
 <operation name="process">
<input message="tns:WR01RequestMessage"/>
<output message="tns:WR01ResponseMessage"/>
</operation>
</portType>
−
 <binding name="WR01Binding" type="tns:WR01">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
−
 <operation name="process">
<soap:operation style="document" soapAction="process"/>
−
 <input>
<soap:body use="literal"/>
</input>
−
 <output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
−
 <service name="WR01">
−
 <port name="WR01Port" binding="tns:WR01Binding">
<soap:address location="http://dcmsinusapp02.dc.local:7780/gateway/services/SID0003002"/>
</port>
</service>
−
 <plnk:partnerLinkType name="WR01">
−
 <plnk:role name="WR01Provider">
<plnk:portType name="tns:WR01"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>
When i test the acess using OWSM console or try and consume it on JDeveloper I get the following error:
java.io.IOException: The document 'http://dcmsinusapp02.dc.local:7780/gateway/services/WR01.xsd' contains HTML tags.
Reason is:
404 Not Found
OracleJSP: java.io.FileNotFoundException:
Set the init-param debug_mode to "true" to see the complete exception message
This file not found exception is related to /gateway/services/WR01.xsd of course.
I've mostly followed the OWSM documentation in order to register the service.
Am I doing anything wrong referencing xsd's or something similar?
Thanks in advance

Answer to my own question:
BPEL processes exposed via OWSM can't be used from JDEV ws proxy generator
But the real question is: how do I prevent relative paths to xsd's on bpel wsdl?
Any pointers?
Thanks

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
Word, and powerpoint application are working fine.
Environment : Windows 7 64-bit, MS Office 2013 64-bit
Steps to recreate
(i) Create new user account and add to any group ( do not log on using this
account)
(ii) runas /user:<new user account> <fullpath>\excel.exe
it will ask password so enter on command prompt
(iii) open any excel document and click File->Print
(iv) verify result (it is failing) it pop ups below error
Error:`Microsoft Excel
No printers are installed. To install a printer click the File tab, and then click
Print. Click No Printers Installed, and then click Add Printer. Follow the
instructions in the Add Printer dialog box.

Sorry for late reply i was not at work
I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
Probably excel behaves differently from other office applications.
Probably it is a bug in excel
Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

ColdFusion 11 Throws Error Session Variable Undefined, When in fact it is Defined as shown by CFDump.

I've been having a particularly annoying error with ColdFusion 11, and unable to track down the source of this problem.
Basically There are a few variables defined in the session scope we check with isdefined a few lines above to make sure they are defined. Subsequent lines may or may not throw a #variablename# is undefined on random lines.
What can I do to fix this issue? Is this a known bug?

I am doing isDefined checks for relevant variables when neccessary. The problem is not that the code errors out undefined ... it's that the variable is actually defined and errors out undefined.
As a simplified example;
Login.cfm Form supplies form.username and form.password to login_action.cfm then redirects to index.cfm after succesful LDAP authentication. I will not include all lines as it would be too long.
Login_action.cfm
<cfinclude template="ldap.cfm">

<cftry>
 <cfif isdefined("logged_in") and logged_in>
 
 <cfset session.user=StructNew()>
 <cfset session.user.username=form.username>
 <cfset session.user.firstname="">
 <cfset session.user.surname="">
 <cfset session.user.email="">
 
 <cfquery name="qDetails" datasource="userdetails">
 SELECT firstname,surname,email FROM Profiles
 WHERE username = '#session.user.username#'
 </cfquery>
 <cfif isdefined("qDetails") and qDetails.recordcount>
 <cfoutput query="qDetails">
 <cfset session.user.firstname ="#qDetails.firstname#">
 <cfset session.user.surname="#qDetails.surname#">
 <cfset session.user.email="#qDetails.email#">
 </cfouput>
 </cfif>
 <cfelse>
 
 <cfthrow message="1" type="Custom_Security" ErrorCode="Fail">
 </cfif>
 <cfcatch type="any">
 
 <cfthrow message="2" type="Custom_Security" ErrorCode="Fail">
 </cfcatch>
</cftry>

<cflocation url="index.cfm">
Index.cfm

<cfparam name="session.user.email" default="">


<cfquery name="qUserInformation" datasource="userdetails">
SELECT * FROM Information
WHERE user_email = '#session.user.email#'
ORDER BY SomeOtherColumn
</CFQUERY>

<cfquery name="qUserGroups" datasource="userdetails">
SELECT * FROM Groups
WHERE user_email = '#session.user.email#'
ORDER BY SomeColumn
</CFQUERY>

<cfscript>
oHomePage=CreateObject("component","site_components.homepage");
qNews=oHomePage.getNews("#session.user.category#");
</cfscript>

in the wwwroot the Application.cfm handles all errors generated during rendering of the page, which includes generating a cfdump of the session scope.
When I get the Error Log I can see in the cfcatch cfdump the error... Element USER.EMAIL UnDefined in SESSION.
struct
Browser
Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/37.0.2062.124 Safari/537.36
DateTime
{ts '2014-09-28 11:38:48'}
Diagnostics
Element USER.EMAIL is undefined in SESSION. The error occurred on line 15.
However when I check the SESSION scope which is also dumped ... It is defined!
struct
user
struct
COLOR
cccccc
EMAIL
[email protected]
FIRSTNAME
Example
SURNAME
Surname
EXAMPLE1
1
TEMPLATE
template14
TEMPLATE_DETAILS
0
What is causing this strange and irratic behaviour? The problem is so far I cannot replicate the issue. It is intermittant. The issue only started after upgrading to ColdFusion 11. This code has worked flawlessly for years on CF8.

[Windows] file.url throw error when application executable in root directory

Here is the bugbase ticked: Bug#3940278 - [Windows] file.url throw error when application executable in root directory
If you launch AIR application packaged as bundle from root directory and try to get url property of any file you get IllegalOperationError.
No matter what file url property you try to get.
It's a big problem when you distribute your application on CD disks or flash drive.
I'd like to ask everyone affected by this issue to take a minute and vote for the following bug.
Thanks.

I checked all deployment descriptions and there are no references to t3://localhost:7001. Few months back, I had the complete clustering setup working on 2 machines and now when I deploy my application on same configuration, it fails with t3://localhost:7001 unreachable error. I created a new cluster configuration on one machine with 2 managed server and it deploys fine. Can not figure out what has changed ?

Help, some font work on flash.text.engine throw Error #2161

I found some font work on flash.text.engine throw Error #2161
they are: "Vivaldi","Harlow Solid Italic","Bauhaus 93", "Algerian".
the error info is:
Error: Error #2161: 设置文本布局时出现内部错误。
at flash.text.engine::TextBlock/DoCreateTextLine()
at flash.text.engine::TextBlock/createTextLine()
at flashx.tcal.compose::ComposeState/createTextLine()[C:\Development\tcal_core\flashx\tcal\c ompose\ComposeState.as:292]
at flashx.tcal.compose::ComposeState/composeNextLine()[C:\Development\tcal_core\flashx\tcal\ compose\ComposeState.as:207]
at flashx.tcal.compose::BaseCompose/composeParagraphElement()[C:\Development\tcal_core\flash x\tcal\compose\BaseCompose.as:238]
at flashx.tcal.compose::BaseCompose/composeBlockElement()[C:\Development\tcal_core\flashx\tc al\compose\BaseCompose.as:150]
at flashx.tcal.compose::BaseCompose/composeInternal()[C:\Development\tcal_core\flashx\tcal\c ompose\BaseCompose.as:213]
at flashx.tcal.compose::ComposeState/composeInternal()[C:\Development\tcal_core\flashx\tcal\ compose\ComposeState.as:120]
at flashx.tcal.compose::BaseCompose/composeTextFlow()[C:\Development\tcal_core\flashx\tcal\c ompose\BaseCompose.as:194]
at flashx.tcal.compose::ComposeState/composeTextFlow()[C:\Development\tcal_core\flashx\tcal\ compose\ComposeState.as:89]
at flashx.tcal.compose::StandardFlowComposer/http://ns.adobe.com/tcal/internal/2008::callThe Composer()[C:\Development\tcal_core\flashx\tcal\compose\StandardFlowComposer.as:383]
at flashx.tcal.compose::StandardFlowComposer/compose()[C:\Development\tcal_core\flashx\tcal\ compose\StandardFlowComposer.as:434]
at flashx.tcal.factory::TextLineFactory$/factoryMeasure()[C:\Development\tcal_core\flashx\tc al\factory\TextLineFactory.as:267]
at flashx.tcal.factory::TextLineFactory$/createTextLinesFromTextFlow()[C:\Development\tcal_c ore\flashx\tcal\factory\TextLineFactory.as:186]
at mx.graphics.graphicsClasses::TextFlowComposer/composeTextFlow()[E:\dev\trunk\frameworks\p rojects\flex4\src\mx\graphics\graphicsClasses\TextFlowComposer.as:123]
at mx.graphics::TextGraphic/compose()[E:\dev\trunk\frameworks\projects\flex4\src\mx\graphics \TextGraphic.as:511]
at mx.graphics::TextGraphic/measure()[E:\dev\trunk\frameworks\projects\flex4\src\mx\graphics \TextGraphic.as:297]
at mx.graphics.graphicsClasses::GraphicElement/measureSizes()[E:\dev\trunk\frameworks\projec ts\flex4\src\mx\graphics\graphicsClasses\GraphicElement.as:2592]
at mx.graphics.graphicsClasses::GraphicElement/validateSize()[E:\dev\trunk\frameworks\projec ts\flex4\src\mx\graphics\graphicsClasses\GraphicElement.as:2554]
at mx.components::Group/validateSize()[E:\dev\trunk\frameworks\projects\flex4\src\mx\compone nts\Group.as:307]
at mx.managers::LayoutManager/validateClient()[E:\dev\trunk\frameworks\projects\framework\sr c\mx\managers\LayoutManager.as:837]
at mx.controls::List/makeRowsAndColumns()[E:\dev\trunk\frameworks\projects\framework\src\mx\ controls\List.as:1302]
at mx.controls.listClasses::ListBase/makeAdditionalRows()[E:\dev\trunk\frameworks\projects\f ramework\src\mx\controls\listClasses\ListBase.as:3901]
at mx.controls.listClasses::ListBase/updateDisplayList()[E:\dev\trunk\frameworks\projects\fr amework\src\mx\controls\listClasses\ListBase.as:3635]
at mx.controls::List/updateDisplayList()[E:\dev\trunk\frameworks\projects\framework\src\mx\c ontrols\List.as:1004]
at mx.controls.listClasses::ListBase/validateDisplayList()[E:\dev\trunk\frameworks\projects\ framework\src\mx\controls\listClasses\ListBase.as:3273]
at mx.managers::LayoutManager/validateDisplayList()[E:\dev\trunk\frameworks\projects\framewo rk\src\mx\managers\LayoutManager.as:622]
at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\trunk\frameworks\projects\frame work\src\mx\managers\LayoutManager.as:695]
at Function/http://adobe.com/AS3/2006/builtin::apply()
at mx.core::UIComponent/callLaterDispatcher2()[E:\dev\trunk\frameworks\proje

<div class=Section1> xtaotao,<o:p></o:p> <o:p> </o:p> Can you please file a bug in the bug base at <a href="http://bugs.adobe.com/flex/">http://bugs.adobe.com/flex/</a> and include a simple test case (and/or a list of fonts not working for you) showing the behavior. If you file against “Flex SDK” and the “Gumbo: TextArea” it will end up in my queue and I can investigate and transfer to the appropriate team(s) as needed.<o:p></o:p> <o:p> </o:p> Thanks,<o:p></o:p> <o:p> </o:p> Peter deHaan<o:p></o:p> Flex SDK Team | Adobe Systems Inc.<o:p></o:p> <o:p> </o:p> color:#1F497D'><o:p> </o:p> color:#1F497D'><o:p> </o:p> <div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'> From:<span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> xtaotao [mailto:[email protected]] Sent: Tuesday, November 04, 2008 4:07 AM To: [email protected] Subject: Re: Help, some font work on flash.text.engine throw Error #2161<o:p></o:p> </div> <o:p> </o:p> A new message was posted by xtaotao in Developers -- Help, some font work on flash.text.engine throw Error #2161 and more font work on flash.text.engine do not throw error, but display effect are different with TextField. <o:p></o:p> <div class=MsoNormal> <hr size=2 width=200 style='width:150.0pt' align=left> </div> View/reply at <a href="http://www.adobeforums.com/webx?13@@.59b6ee06/0">Help, some font work on flash.text.engine throw Error #2161</a> Replies by email are OK. Use the <a href="http://www.adobeforums.com/webx?280@@.59b6ee06!folder=.3c060fa3">unsubscribe</a> form to cancel your email subscription.<o:p></o:p> </div>

[svn:fx-trunk] 10891: Fix for ASDoc throws error when using getter methods for pseudo-inheritance of static constants

Revision: 10891
Author:   [email protected]
Date:     2009-10-06 09:46:47 -0700 (Tue, 06 Oct 2009)
Log Message:
Fix for ASDoc throws error when using getter methods for pseudo-inheritance of static constants
QE notes: None.
Doc notes: None
Bugs: SDK-22676
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22676
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java

Have you tried using com.adobe.air.crypto.EncryptionKeyGenerator instead?

Report throwing error

Hi BI Experts,
I have an issue in the report output. The query is giving the data but the report is not showing the same.
when nonexisting values are given, report is throwing ERROR instead of giving blank page. Client is expecting blank page or dummy page with tables or headings etc but not the error message.
Please suggest a solution for this.
Let me know if anybody needs any other information regarding this.
Thanks in advance.

you need to use no data found logic in order to get blank or any message saying no data found for that selected value.
check this link
https://blogs.oracle.com/xmlpublisher/entry/no_data_found
or
send me your sample xml having data and no data and template i can try at my side. email: [email protected]
assign me some points if helpful

BPEL wsdl customisation throwing Error -- Bug?

Similar Messages

Maybe you are looking for