BPM Application requires auto claim for worklist instances

Hi All
Our BPM application (SOA 11g), requires that the BPM instances in the worklist be auto claim enabled for each instance. The reason for this is that each instance is an ADF form that has 2 very distinct outcomes. Having set the human task(based on which the ADF forms are built) in the BPM workflow, to auto-claim enabled, I still notice that the instances are not claimed when open. The forms can be open by multiple users concurrently which is not an acceptable solution by the client from a security point of view. We need to enable auto claim as part of our BPM administration for each instance.
Is there a way within the BPM Administration that this can be done?
Any suggestions programatically or via the tool?
Many Thanks
Preethi

Hi,
Are you using your own certificates for SSL? If yes,you must remove references to the demo certificates by removing the following line from the setDomainEnv file for your version of the operating system.
-Djavax.net.ssl.trustStore=${WL_HOME}/server/lib/DemoTrust.jks
Also check that the path for truststore are properly set in setDomainEnv.sh/Cmd file.

Similar Messages

Application Server job failed for service instance Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance

Hi
in our shaepoint farm we have a application server,one wfe server and one reporting server
and we are using BI solutions and running performance point service
i keep getting below error in wfe server and reporting server as well also.
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Server
Date:          01/09/35 02:23:34 م
Event ID:      6481
Task Category: Shared Services
Level:         Error
Keywords:
User:          XYZPORTAL\spfarm
Computer:      XYZWFE02.XYZportal.com
Description:
Application Server job failed for service instance Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance (b340454e-ab06-4981-80f7-81d2326a1b32).
Reason: An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance was updated by XYZPORTAL\spfarm, in the OWSTIMER (7296)
process, on machine XYZWFE02. View the tracing log for more information about the conflict.
Technical Support Details:
Microsoft.SharePoint.Administration.SPUpdatedConcurrencyException: An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance
was updated by XYZPORTAL\spfarm, in the OWSTIMER (7296) process, on machine XYZWFE02. View the tracing log for more information about the conflict.
   at Microsoft.SharePoint.Administration.SPConfigurationDatabase.StoreObject(SPPersistedObject obj, Boolean storeClassIfNecessary, Boolean ensure)
   at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Microsoft.SharePoint.Administration.ISPPersistedStoreProvider.PutObject(SPPersistedObject persistedObject,
Boolean ensure)
   at Microsoft.SharePoint.Administration.SPPersistedObject.BaseUpdate()
   at Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance.Synchronize(Boolean calledFromSearchServiceInstance)
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Server" Guid="{C33B4F2A-64E9-4B39-BD72-F0C2F27A619A}" />
    <EventID>6481</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>3</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-28T11:23:34.565108900Z" />
    <EventRecordID>1419864</EventRecordID>
    <Correlation ActivityID="{CEACAABB-34A0-41F6-88B0-0834929B654C}" />
    <Execution ProcessID="14104" ThreadID="19380" />
    <Channel>Application</Channel>
    <Computer>XYZWFE02.XYZportal.com</Computer>
    <Security UserID="S-1-5-21-681022615-1803309023-368063384-1108" />
</System>
<EventData>
    <Data Name="string0">Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance</Data>
    <Data Name="string1">b340454e-ab06-4981-80f7-81d2326a1b32</Data>
    <Data Name="string2">An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance was
updated by XYZPORTAL\spfarm, in the OWSTIMER (7296) process, on machine XYZWFE02. View the tracing log for more information about the conflict.</Data>
    <Data Name="string3">Microsoft.SharePoint.Administration.SPUpdatedConcurrencyException: An update conflict has occurred, and you must
re-try this action. The object SearchDataAccessServiceInstance was updated by XYZPORTAL\spfarm, in the OWSTIMER (7296) process, on machine XYZWFE02. View the tracing log for more information about the conflict.
   at Microsoft.SharePoint.Administration.SPConfigurationDatabase.StoreObject(SPPersistedObject obj, Boolean storeClassIfNecessary, Boolean ensure)
   at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Microsoft.SharePoint.Administration.ISPPersistedStoreProvider.PutObject(SPPersistedObject persistedObject,
Boolean ensure)
   at Microsoft.SharePoint.Administration.SPPersistedObject.BaseUpdate()
   at Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance.Synchronize(Boolean calledFromSearchServiceInstance)
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)</Data>
</EventData>
</Event>
adil

HI
I cleared the configuration cache and restarted the Reporting server ,
and performance point service,
and bi Pointers working fine and after some time it stopped to render data,
and received below error messge in wfe server
Log Name:      Application
Source:        Microsoft-SharePoint Products-PerformancePoint Service
Date:          04/09/35 01:44:58
م
Event ID:      1
Task Category: PerformancePoint Services
Level:         Error
Keywords:
User:          NT AUTHORITY\IUSR
Computer:      XYZWFE02.XYZportal.com
Description:
An exception occurred while the width of the Web. Diagnostic information that may help determine the cause of the following in this issue:
Microsoft.PerformancePoint.Scorecards.BpmException: There is a problem in the preparation of a Web Part for display.
Error code "Services PerformancePoint" is 20700.Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
    <EventID>1</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>1</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-01T10:44:58.277694100Z" />
    <EventRecordID>1426175</EventRecordID>
    <Correlation ActivityID="{C4FDF79F-347D-48C5-8F2D-B732D353F20E}" />
    <Execution ProcessID="17088" ThreadID="18964" />
    <Channel>Application</Channel>
    <Computer>XYZWFE02.XYZportal.com</Computer>
    <Security UserID="S-1-5-17" />
</System>
</Event>
adil

There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'.

HI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adil

HI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adil

Do we require HBA card for single instance database.

Hi All,
I have doubt that we are going to implement a single instance with ASM.
Db version will 11gR2 as it is asm. My concern HBA is required for single instance oracle database.
Please suggest.
Thanks and Regards,

The question is : do you want your user to be able ti use their application offline ?
If yes, then you may provide them a local database and use a JDBC type4 driver. (The application is fetch directly from the server when first connected and then is able to lauch the applicaiton off-line) Such a network listen is allowed by the JNLP security model without any application sign !
If no, then why not having a single database and some user debedant table that store the user specific data (as usual), and using a login dialog-bon (or an auto-logon mechanism) to restric identify and access your database thru some business logic via RMI or any ligh-webservice technology.
Anyway you have plenty of solutions ..... it only depends of what are the exact needs.
Regards,
Jean-Baptiste Bugeaud
WWW.UP2GO.NET - The JNLP Applications Repository

Auto retry for the instances under manual recovery

Hi
I have a situation where i need to refire all the instances which are in activities tab [because of manual intervention in the fault policy] at regular intervals.
Checked the documentation where it says in 10.1.3.4 we can configure a time frame where it will refire all the instances which are in recover tab under administration.
Tried out that option but it is not taking the instacnes which are in activities tab
Can some one suggest a workaround for this
Thanks
Vamsi

Hi,
When I try to recover the instance that is waiting for manual recovery, I didn't see anything happening.
Also the the fault policy is active and working fine during the retry intervals. That means If I disable one of the webservices and enable them during the retry it is success after some failure retries.
Any ides why the recovery not working in SOA 10.1.3.3
--Khaleel

Making a BPM application available outside firewall

Hi all,
We have BPM version 11.1.1.6.0
We have developed BPM application (A simple form for the applicants who are external users (to our network) and when submitted will be reviewed by internal users).
The application also has a customized ADF interface. This is working perfectly fine when being tested within the firewall.
Now we want to release this to the public users (who will be creating their individual accounts to use the application). We tried setting up proxy, but encountered a problem, where on certain sections of the application, specially when users are using 'SAVE'/'SUBMIT' buttons that are on BPM interface, to submit or save the form, the application fails with 'URL not found 404 Error'.
We have set up a proxy server for the prod BPM server, which will be in DMZ.
After digging further we found that one of the URL paths that was being executed when the application failed, is referring to the host name , not the the name of the server that is specified in the proxy, which would be its DNS entry name.
This is happening each time SAVE/SUBMIT buttons are pressed from the BPM side. Please note that these are default buttons provided by the BPM interface and we did not customize these buttons.
Is this is configuration issue on the server? or is it something to do with application configuration? We have been staring at it so long now, looks like we are hitting a wall. This is the first ever BPM app from our shop, so we are pretty green on this and would appreciate some expert advise.
Thanks
SR

Hi SR,
These hostname URLs are generated for the SOA/BPM worklist app using the WFTASKDISPLAY table. You'll find the table in the SOAINFRA schema (you installed this with the repository creation tool rcu). The table gets populated several ways, but usually on deployment of an ADF Human task flow to the soa server. It can be modified after deployment through enterprise manager. Oracle do not recommend editing it directly. The supported way to edit it is to go to the human task service engine and find the human task. From memory - get to the human task engine in EM by right clicking the Soa in EM, then select service engines, then human workflow. You should find your human tasks in the lists displayed.
This may not be the the full answer for you but will hopefully get you looking in the right place to fix your hostname issue.
Phil

Auto claim a Task in the Worklist and limit the amount of assings per user

Hi, I have two questions:
1) Is there a way to implement "auto claim" in the worklist? I need to assign the task to the logged user as soon as the task is opened by the user.
2) Is there a way to limit the amount of tasks that the user claims? I need to avoid the situation of a user claiming more than one task. In other words, I need that "If a user claims a task, he MUST release or action it before claiming another task"
Thanks in advance,
Edited by: Neuquino2 on Apr 30, 2010 1:03 PM
I'm working with 11g

Ok, I understand your use case for question 1. I actually have this same problem I have been trying to solve for a couple of weeks and haven't found a solution. My use case is slightly different. I have to assign to a group, but in some cases, I know which user in the group the task should be assigned to. However, the requirement is that I assign to the group. So I am trying to figure out how to use the routeTask method of the task service to route the task to the user after the task has already been created and assigned to the group. Not sure yet if that works. I have an SR open with Oracle Support. In your case, it sounds like you want the first member of the assigneeGroup who looks at the task to become the acquiredBy user. I would assume you would need to use routeTask in the Workflow API (in my case, I am using routeTask from BPEL).
On the second question, I doubt that you will find any out-of-box mechanism to do this. There are the three workload balancing rules built into workflow API and available in the worklist application - round robin, least busy, and most productive. But none of those will fit your requirement. However, supposedly you should be able to create your own algorithm. I don't know how to do this, but there should be some place in the documentation that tells you how to do it.

Auto Claim Tasks in BPM Human Workflow

All,
I have a requirement with a customer to auto claim tasks. When a user selects a task from their task list (tasks by default are assigned to a role), it should be auto claimed. This is to prevent other users from working the task at the same time.
I appreciate I could educate / train the users to have to press the Claim button first, however I was investigating the feasibility of doing an Auto claim to reduce the need for the users to do this.
Does anyone know if this is supported Out of the box with BPM Suite? I have looked around the documentation and have seem no ways of doing this. An alternative would be to use the BPM API's however I ideally would prefer to not need to write custom logic for this.
Your thoughts and experiences would be appreciated
Regards
Dave

Hi Dave,
The default when you create a human task is that it is set to auto claim. To see this, open one of your human tasks -> click "Assignment" -> click the pencil icon in the upper right corner. There you should see the "Enable Auto Claim" checkbox already checked by default.
Take a look at this link for more on auto claim: Re: Is it necessary to Claim task? Seems to work without doing so
Hope this helps,
Dan

Automatically upgrade any superseded versions of this application not auto installing - Status always waiting for next maintenance schedule

Hello,
I'm trying to deploy an application to a user group with the option checked for "Automatically upgrade any superseded versions of this application" but it never auto installs.
- The application is set to install to system whether the user is logged on or off.
- We do have user affinity, therefore the user does have a one or more primary devices setup.
- If I run the install manually, it will superseded and install the new application and uninstall the old applications.
- The estimated installtion time minutes is set to 0
- The maxmimum allowed run time is set to 120 minutes.
We're on version SCCM 2012 SP1.
My assumption of how it should work
If the user is logged in or NOT and it's during the maintenance window, it should auto install the application. Maybe I'm wrong.
Here's the scenario.
User JohnDoe has application Viewer 1.0 installed on his machine. He installed this app via the SCCM application catalog. We now need to deploy Viewer 2.0 of this application. I want to ensure when it's deployed it replaces Viewer 1.0 hence
the reason to check the "auto upgrade.."check box.
Here's what happens. In software center, it will pre-downlaod the software and then set the status to "Waiting for next maintenance schedule". The problem is that the status stays like this forever. We do have maintenance windows set
on the device collection that JohnDoe's primary device is part of. Here are our maintenance windows.
- Daily - 9PM to 5AM = 8 hours
- Weekly - Saturday - 12:00AM to 12:00 = 24 hours
- Weekly - Sunday - 12:00AM to 12:00 = 24 hours
Coordinated UTC is not checked.
The business hours in software center are set to 5am to 10pm.
One would assume that it would auto install during the night since we have a big maintenance windows. I checked the ServiceWindowmanager.log and it does seem to show the various maitnenance windows.
Here's what I've tried
- If I make the deployment required, it will install right away regarless of maintenance windows. However, i don't want to use this option because if the user logs in to other machine (e.g. boardroom computer), it will auto install this software.
- If JohnDoe clicks install in Software center or application catalog, it works. There's nothing wrong with the packages. The issue seems to be related with the maintenance windows.
- If I disable the maintenance windows, then it seems to work but only when I'm logged in. It still does not work if I'm logged out. It only kicks off the installation when I login if it's not during the business hour set in software center.
We need the maintenance windows since we don't want windows patching to occur during the day.
- I searched and ran the report to ensure there's not another maintenance windows setup that would prevent this from installing.
Our current workaround
To ensure users are using the latest version, we deploy the application required for a couple of days, then delete that deployment once we reach a high 90%. The problem with that is if some computers are turned off, they would be using the older version
and it will never get upgraded unless the user installs it manually.
Has anyone encountered this? Any other log files I should look at? Anything else I should verify ? I know in SCCM 2012 R2, you can set the maintenance window to only apply this schedule to software update (patching) but that option doesn't seem
to be available in SCCM 2012 SP1.
Any help, suggestiong, I will take. Thanks.

- If I make the deployment required, it will install right away regarless of maintenance windows. However, i don't want to use this option because if the user logs in to other machine (e.g. boardroom computer), it will auto install this software.
Re-check your deployment, specially the user experience:
If you've checked the box next to "Software installation", it will install after the deadline has passed and ignores maintenance windows. Change the deployment to required and uncheck that box and the software should be installed according to your
maintenance windows.

Hardware Requirements for Production Instance of EBS R12 version (12.1.1)

Hi All,
Can you please let me know, what is the Hardware Requirements ( like CPU's, RAM size and HDD size)for Production Instance of EBS R12 version (12.1.1) about 3000 users.
The production instance would be deployed on a Multi-Node architecture where in the Database and Concurrent Managers would be deployed in one box.
Forms & Web server (Application tier) would be deployed on a different box. It is proposed to have a minimum of two front-end servers with a hardware based load balancer for traffic management.
Thanks,
Venkat

My company have EBS R12.1.2 on LINUX system. We used HR, Finance, DW, ODI, Single sign on, Hyperion and peoplesoft.
we use two DELL R910 servers for production. one for EBS and ODI, another server for Peoplesoft, Hyperion, DW, ....
Our record indicate highest concurrent users are 1120 on EBS server. For EBS server I will suggest at least following configuration for more tan 1000 users:
1. DELL R910 with 4 sockets in it. each sock may have 2 to 4 cores. Even this configuration sometime we still get server complain 90% CPU load warning.
2. Min 64 GB RAM . 128 GB or 256 GB prefer.
3. Redhat X86_64 version Linux . Prefer version 5.7 and up.
4. PERC 6/E or H800 RAID card and connect to MD1000 or MD1120.
5. One MD1000/1120 for database, and two for backup (1TB X 15 disks). Depend on how many days backup keep on RAID. Our EBS database data in one year grow from 60 GB to 350 Gb.
6. dedicate tape backup library and server. Due to large amount of data.
7. need Grid control (OEM) server to monitor all databases and application servers.
8. for application server, you need at least two DELL R910 and run Microsoft Hyper-V in it better performance than VMware. Configure All EBS relate application servers on each R910 for redundant and load balance. I f you plan is 3000 users. You may need 4 DELL R910 servers. Anyway it can add later.
9. same hardware configuration may need for staging/test application servers.
10. If you want RAC or standby databses, you need more.
11. For development staging/test database server, you may need similar configuration. We have four servers for that purpose.
13. Don't forget ORACLE license you need purchase for database, application server and ....
13. EBS solution is NOT cheaper. If you can do other way, think it first. NOT only hardware, man power also very expensive.

A wallet needs to be configured for this instance of Application Express

hi
I m very new to APEX. I could create web service client with wsdl. But when service is on https i get message
"a wallet needs to be configured for this instance of Application Express".
I have created wallet using OWM (10.2.0.1.0) at location c:\del_sometime
Using admin i configured APEX instance settings wallet as
Wallet Path = file:c:\del_sometime
And checked in database too
SQL> ALTER SESSION SET CURRENT_SCHEMA = APEX_030200;
Session altered.
SQL> SELECT
2 APEX_INSTANCE_ADMIN.GET_PARAMETER('WALLET_PATH')
3 from dual;
APEX_INSTANCE_ADMIN.GET_PARAMETER('WALLET_PATH')
file:c:\del_sometime
Any idea whats wrong? I am following steps from http://download.oracle.com/docs/cd/E14373_01/admin.32/e13371/adm_wrkspc.htm#BABFBJEA

also whe I try following i keep getting error failure to open file. I am on XP and file is present with proper permissions.
SQL> SELECT utl_http.request('https://support.oracle.com/',null,'file:c:\del_sometime\') from dual;
SELECT utl_http.request('https://support.oracle.com/',null,'file:c:\del_sometime\') from dual
ERROR at line 1:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1577
ORA-28759: failure to open file
ORA-06512: at line 1

User Authorization, best practices for this custom application requirement?

JDeveloper 12c (12.1.2)
We want to use external LDAP (active directory) with ADF security to authenticate and authorize users.
One of our custom application requirements is that there is a single page with many interactive components. It has probably about 15 tables and each table would need to have the following buttons (or similar components):
- delete: (if certain row is selected) to delete it
- edit: (if certain row is selected) takes user to 'edit page' where changes can be made
- create: to create new record for this particular VO (table)
So let's say that would be 3 x 15 = 45 different actions that single user can possibly perform. Not all users have same 'powers' ie some users can only edit CERTAIN tables, and delete from one or two. Most users can create and edit most VOs etc
Back when this application was originally developed using (I believe) 10g JDeveloper with UIX, the way it was done is that we maintained a table in database with 'user credentials' as Y or N flags.
For example: DEL_VO1, EDIT_VO1, ADD_VO1....
So when user is authenticated we would then pull all these credentials from the DB table and load them into the session variables. Then we would use EL to render or not render certain buttons on the page. For example: rendered="#{sessionScope.appDelVo1 == 'Y'}"
Moving forward into latest ADF technology, what would be the best practice to achieve described functionality?

Hi,
ADF BC could have permissions added to the entity level (includes remove and update). So you can create permissions for the entity (as it doesn't matter for data security how data is accessed. If as a user you are nit allowed to change a database table then this is for tables and forms). You can then use EL to check the permission, thus no need to keep the privileges in the database.
If a user is allowed to update an entity then you can check this using EL in the UI
<af:inputText value="#{bindings.DepartmentName.inputValue}"
readOnly="#{!bindings.DepartmentName.hints.updateable}">
whatch this for a full coverage of ADF Security: Oracle ADF Security Overview - Oracle JDeveloper 11g R1 and R2
Frank

Auto Stop for Applications

Essbase supports the Auto Logoff for users depending on inactive time. I'm looking for a kind of "Auto Stop" for Applications depending on 'non usage time': e.g. if a started Application has not been used for let's say 60 minutes, it shall be stopped automatically. Is there a solution for that issue? We use Essbase OLAP Server in version 6.5.4. Thanks for any info or remark.

this does not exist.Some people have written their own programs that monitor the server log then stops the app. hj

I did an auto-update on itunes today and now itunes is unresponsive..it gives this error "An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."

I did an auto-update on itunes today and now itunes is unresponsive..it gives this error "An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."
Wouldn't apple check before releasing new version, I see so many people with same issue..its such a waste of time for everyone now to fix it.
Is there any other way to fix before I try to un-install everything and re-install back?

Hello iTunes_Bad_Update,
The following article provides information and troubleshooting steps that can help get iTunes back up and running.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

BPM Application: Task access related issue

Hi Gurus,
I have one secure (using ADF security) Application(Simple ADF Application), which will write data in XML format into a JMS Queue.After login to application,user can use that functionality. Then that message is fetched by one BPM Application and creates one task against a BPM user. This two applications are working fine upto this level, but after login to BPM workspace using BPM user , I am not able to see the task details(but in inbox task is reflected) after clicking on the task instance and I am getting error message like this :
======================================================================================================
javax.servlet.ServletException: Can not access the task details of jcooper using logged in user Sharmistha
     at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:201)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:176)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
======================================================================================================
Task owner bpm:getPerformer() is not found in application OracleBPMProcessRolesApp and realm jazn.com. This task is associated with task definition default/DemoApplicationBP!1.0/InitiateEnquiry.
Either set a seeded owner or seed this owner who is not found.
ORABPEL-30080
Task owner role not seeded.
Task owner bpm:getPerformer() is not found in application OracleBPMProcessRolesApp and realm jazn.com. This task is associated with task definition default/CustomerConnectionBP!1.0/InitiateEnquiry.
Either set a seeded owner or seed this owner who is not found.
     at oracle.bpel.services.workflow.task.impl.TaskService.initiateTask(TaskService.java:1550)
     at oracle.bpel.services.workflow.task.impl.TaskService.initiateTask(TaskService.java:666)
     at oracle.bpel.services.workflow.task.impl.TaskService.initiateTask(TaskService.java:614)
======================================================================================================
where jcooper is the BPM user and Sharmistha is user of the secured application.
I tried to add BPM users in the secured application , but that does not work. (it is mandatory that BPM user and Secured Application's user should be different)
How to resolve this type of problem. any type of suggestion on this would be helpful.
Thanks is Advance
Sharmistha

Hi, -CHS,
i have a query regarding the code snippet.
FacesContext facesContext = FacesContext.getCurrentInstance();
org.apache.myfaces.trinidad.render.ExtendedRenderKitService service =org.apache.myfaces.trinidad.util.Service.getRenderKitService(facesContext, ExtendedRenderKitService.class);
service.addScript(facesContext, "window.close();window.opener.location.href = window.opener.location.href;");
If a create a button in my only JSF page in a simple ADF application and use this code snippet for that button action, then will it help to close the page?
And yeah, here i have created a bounded task flow with a wild card and task return activity and added my JSF page in the taskflow. But now it is not closing my page on the button click.
Can you tell me if i am doing any wrong?
Please reply.
Edited by: Ross Mi Ron John on Jul 27, 2011 5:46 AM

BPM Application requires auto claim for worklist instances

Similar Messages

Maybe you are looking for