BPM Enterprise for weblogic and clusters

good morning every body
what is the best practice for High Avalibilty Clustered environement for BPM enterprise for weblogic ?
i know that clustering is done on the Weblogic server side but is there is any constraints regarding to ALBPM clustering
if some one would direct me to a diagram of the clustring best practice it would be appreciated!

Hi,
Event I am facing the similar problem but its irrregular(but most of the time). I get following as a log while shutting down the server.
Stopping Weblogic Server...
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to t3://localhost:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'atg
_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Shutting down the server AdminServer with force=false while connected to AdminSe
rver ...
And it countinues...
Regards,
Kevin Chheda

Similar Messages

How to install BPM Enterprise for weblogic

I need to install BPM Enterprise for Weblogic 10.3. However, the weblogic is installed in another machine. BPM and weblogic are installed in different machines.
When I configure the BPM, how to set the weblogic home and workspace folder?

Hi Ruben Vidaurre,
Thanks for your reply.
During the configuration of BPM after installation, I should key in the Weblogic Home address and select a folder for it. I can configure it and know where the weblogic home address is if weblogic server and BPM enterprise for weblogic are installed in the same machine.
How to key in the weblogic home address if the weblogic is installed in another machine (BPM Enterprise for weblogic and weblogic are install in different machine) ?

WLST Failed in Oracle BPM Enterprise for Weblogic Server

Hi,
I am not getting any clue of resolving the following issue. We are using Oracle BPM Enterprise for Weblogic # 100141. Error details:-
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
t3://192.68.1.3:
Connecting to t3://192.168.1.3: with userid weblogic ...
This Exception occurred at Tue Jul 3 :56: IST .
weblogic.utils.NestedError: Local host not known?!
 at weblogic.rjvm.JVMID.setLocalClientID(JVMID.java:9)
 at weblogic.rjvm.JVMID.localID(JVMID.java:8)
 at weblogic.protocol.LocalServerIdentity$SingletonMaker.<clinit>(LocalServerIdentity.java:3)
 at weblogic.protocol.LocalServerIdentity.getIdentity(LocalServerIdentity.java:)
 at weblogic.server.channels.ServerChannelImpl.createDefaultServerChannel(ServerChannelImpl.java:3)
 at weblogic.rjvm.t3.ProtocolHandlerT3$ChannelInitializer.<clinit>(ProtocolHandlerT3.java:3)
 at weblogic.rjvm.t3.ProtocolHandlerT3.getDefaultServerChannel(ProtocolHandlerT3.java:4)
 at weblogic.protocol.ServerChannelManager$SingletonMaker$.getOutboundServerChannel(ServerChannelManager.java:339)
 at weblogic.protocol.ServerChannelManager.findOutboundServerChannel(ServerChannelManager.java:43)
 at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:3)
 at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:94)
 at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:5)
 at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:88)
 at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:53)
 at weblogic.jndi.WLInitialContextFactoryDelegate$.run(WLInitialContextFactoryDelegate.java:344)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
 at weblogic.security.service.SecurityManager.runAs(Unknown Source)
 at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:339)
 at weblogic.jndi.Environment.getContext(Environment.java:35)
 at weblogic.jndi.Environment.getContext(Environment.java:85)
 at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:)
 at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:66)
 at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:88)
 at javax.naming.InitialContext.init(InitialContext.java:3)
 at javax.naming.InitialContext.<init>(InitialContext.java:9)
 at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTHelper.java:5)
 at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLSTHelper.java:565)
 at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.java:35)
 at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:3)
 at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:6)
 at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:5)
 at sun.reflect.NativeMethodAccessorImpl.invoke(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:5)
 at java.lang.reflect.Method.invoke(Method.java:59)
 at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:6)
 at org.python.core.PyMethod.__call__(PyMethod.java:96)
 at org.python.core.PyObject.__call__(PyObject.java:48)
 at org.python.core.PyObject.invoke(PyObject.java:6)
 at org.python.pycode._pyx4.connect$(<iostream>:6)
 at org.python.pycode._pyx4.call_function(<iostream>)
 at org.python.core.PyTableCode.call(PyTableCode.java:8)
 at org.python.core.PyTableCode.call(PyTableCode.java:44)
 at org.python.core.PyTableCode.call(PyTableCode.java:8)
 at org.python.core.PyFunction.__call__(PyFunction.java:9)
 at org.python.pycode._pyx6.initConfigToScriptRun$(C:\Documents and Settings\Abhishek\.configWizard\tmp\config.py:5)
 at org.python.pycode._pyx6.call_function(C:\Documents and Settings\Abhishek\.configWizard\tmp\config.py)
 at org.python.core.PyTableCode.call(PyTableCode.java:8)
 at org.python.core.PyTableCode.call(PyTableCode.java:56)
 at org.python.core.PyFunction.__call__(PyFunction.java:69)
 at org.python.pycode._pyx6.f$(C:\Documents and Settings\Abhishek\.configWizard\tmp\config.py:66)
 at org.python.pycode._pyx6.call_function(C:\Documents and Settings\Abhishek\.configWizard\tmp\config.py)
 at org.python.core.PyTableCode.call(PyTableCode.java:8)
 at org.python.core.PyCode.call(PyCode.java:4)
 at org.python.core.Py.runCode(Py.java:35)
 at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:6)
 at weblogic.management.scripting.WLST.main(WLST.java:9)
 at sun.reflect.NativeMethodAccessorImpl.invoke(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:5)
 at java.lang.reflect.Method.invoke(Method.java:59)
 at weblogic.WLST.main(WLST.java:9)
Caused by: java.net.UnknownHostException: HOME-MITTAL: HOME-MITTAL
 at java.net.InetAddress.getLocalHost(InetAddress.java:353)
 at weblogic.rjvm.JVMID.setLocalClientID(JVMID.java:5)
 ... 6 more
No server running at t3://192.168.1.3: or the user/password is wrong
Exiting WebLogic Scripting Tool.
Even I tried using hostname as "localhost" but still I am facing the same issue.
Please suggest what is the resolution for the same.
Thanks,
Abhishek

Hi,
I was getting same excepction when tried to configure weblogic server (10.3.3 and 10gR3) through BPM Configuration Wizard, so I end up doing everything manually, like setting up JDBC data sources, JMS Server, JMS Modules and created DB (Directory & Engine).
Now, I am stuck at the last step of deploying the EAR files generated using BPM Process Administrator, they EAR's are generated fine but while deploying them to Weblogic server (through BPM Process Administrator), getting following exception (for "01-eng-bpmengine.ear")
<Servlet: "engineStartup" failed to preload on startup in Web application: "/albpmServices/bpmengine".
fuego.directory.DirectoryRuntimeException: Exception [java.sql.SQLException: Invalid column type].
 at fuego.directory.DirectoryRuntimeException.wrapException(DirectoryRuntimeException.java:85)
 at fuego.directory.provider.jdbc.oracle.OraclePersistenceManager.mapSQLException(OraclePersistenceManager.java:183)
 at fuego.directory.provider.jdbc.datadirect.oracle.DataDirectOraclePersistenceManager.mapSQLException(DataDirectOraclePersistenceManager.java:50)
 at fuego.directory.provider.jdbc.JDBCServiceAccessor.mapSQLException(JDBCServiceAccessor.java:78)
 at fuego.directory.provider.jdbc.JDBCParticipantsAccessor.fetchHumanParticipant(JDBCParticipantsAccessor.java:1423)
 at fuego.directory.provider.jdbc.JDBCParticipantsAccessor.authenticateHumanParticipant(JDBCParticipantsAccessor.java:370)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at fuego.directory.provider.DirectorySessionImpl$AccessorProxy.invoke(DirectorySessionImpl.java:756)
 at $Proxy246.authenticateHumanParticipant(Unknown Source)
 at fuego.directory.provider.jdbc.JDBCAuthenticationAccessor.getSessionParticipant(JDBCAuthenticationAccessor.java:429)
 at fuego.directory.provider.jdbc.JDBCAuthenticationAccessor.authenticateInternal(JDBCAuthenticationAccessor.java:323)
 at fuego.directory.provider.jdbc.JDBCAuthenticationAccessor.authenticate(JDBCAuthenticationAccessor.java:73)
 at fuego.directory.provider.jdbc.JDBCAuthenticationAccessor.connect(JDBCAuthenticationAccessor.java:127)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at fuego.directory.provider.DirectorySessionImpl$AccessorProxy.invoke(DirectorySessionImpl.java:756)
 at $Proxy243.connect(Unknown Source)
 at fuego.directory.provider.DirectorySessionImpl.connect(DirectorySessionImpl.java:250)
 at fuego.directory.provider.Factory.startSession(Factory.java:405)
 at fuego.directory.provider.jdbc.j2ee.RemoteJdbcDirectoryFactory.startSession(RemoteJdbcDirectoryFactory.java:122)
 at fuego.directory.Directory.startSession(Directory.java:268)
 at fuego.ejbengine.Engine.initDirectorySession(Engine.java:351)
 at fuego.ejbengine.Engine.start(Engine.java:122)
 at fuego.ejbengine.servlet.AbstractSchedulerServlet.init(AbstractSchedulerServlet.java:91)
 at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
 at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
 at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
 at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
 at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
 at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1976)
 at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1950)
 at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1869)
 at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
 at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
 at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
 at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
 at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
 at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
 at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
 at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
 at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
 at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
 at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
 at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
 at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
 at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
 at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
 at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
 at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
 at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
 at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:143)
 at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
 at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
 at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
 at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
 at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
 at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
 at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
 at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
 at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.sql.SQLException: Invalid column type
 at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
 at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:199)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:263)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:271)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:445)
 at oracle.jdbc.driver.OraclePreparedStatement.setObjectCritical(OraclePreparedStatement.java:7975)
 at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:7555)
 at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedStatement.java:8028)
 at oracle.jdbc.driver.OraclePreparedStatementWrapper.setObject(OraclePreparedStatementWrapper.java:238)
 at weblogic.jdbc.wrapper.PreparedStatement.setObject(PreparedStatement.java:324)
 at fuego.jdbc.FaultTolerantPreparedStatement.setString(FaultTolerantPreparedStatement.java:436)
 at fuego.directory.provider.jdbc.JDBCPersistenceManager.setStringAttribute(JDBCPersistenceManager.java:896)
 at fuego.directory.provider.jdbc.JDBCParticipantsAccessor.fetchHumanParticipant(JDBCParticipantsAccessor.java:1417)
 at fuego.directory.provider.jdbc.JDBCParticipantsAccessor.authenticateHumanParticipant(JDBCParticipantsAccessor.java:370)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at fuego.directory.provider.DirectorySessionImpl$AccessorProxy.invoke(DirectorySessionImpl.java:756)
 at $Proxy246.authenticateHumanParticipant(Unknown Source)
 at fuego.directory.provider.jdbc.JDBCAuthenticationAccessor.getSessionParticipant(JDBCAuthenticationAccessor.java:429)
 at fuego.directory.provider.jdbc.JDBCAuthenticationAccessor.authenticateInternal(JDBCAuthenticationAccessor.java:323)
 at fuego.directory.provider.jdbc.JDBCAuthenticationAccessor.authenticate(JDBCAuthenticationAccessor.java:73)
 at fuego.directory.provider.jdbc.JDBCAuthenticationAccessor.connect(JDBCAuthenticationAccessor.java:127)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at fuego.directory.provider.DirectorySessionImpl$AccessorProxy.invoke(DirectorySessionImpl.java:756)
 at $Proxy243.connect(Unknown Source)
 at fuego.directory.provider.DirectorySessionImpl.connect(DirectorySessionImpl.java:250)
 at fuego.directory.provider.Factory.startSession(Factory.java:405)
 at fuego.directory.provider.jdbc.j2ee.RemoteJdbcDirectoryFactory.startSession(RemoteJdbcDirectoryFactory.java:122)
 at fuego.directory.Directory.startSession(Directory.java:268)
 at fuego.ejbengine.Engine.initDirectorySession(Engine.java:351)
 at fuego.ejbengine.Engine.start(Engine.java:122)
 at fuego.ejbengine.servlet.AbstractSchedulerServlet.init(AbstractSchedulerServlet.java:91)
 at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
 at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
 at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
 at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
 at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
 at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1976)
 at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1950)
 at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1869)
 at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
 at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
 at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
 at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
 at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
 at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
 at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
 at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
 at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
 at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
 at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
 at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
 at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
 at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
 at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
 at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
 at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
 at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
 at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:143)
 at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
 at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
 at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
 at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
 at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
 at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
 at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
 at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
 at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
my assumption is JDBC Data Sources or the Directory/Engine database have some column name mismatch.
Let me know if somebody has a solution for this, or if I am doing something wrong.
NOTE: just found out that this happens only on Windows 2003 server, but not on OEL5 (Oracle Enterprise Linux 5).
Thanks !!

'UnknownHostException ' during OBPM enterprise for weblogic configuration

Hi,
I am configuring OBPM enterprise 10.3 for weblogic on Windows 7 machine.
Below is the error that I receive,
[ 18/01/12 14:52:23] t3://esp50ws19444-7:7001
[ 18/01/12 14:52:23] Connecting to t3://esp50ws19444-7:7001 with userid weblogic ...
[ 18/01/12 14:52:23] This Exception occurred at Wed Jan 18 14:52:23 CET 2012.
[ 18/01/12 14:52:23] javax.naming.ServiceUnavailableException [Root exception is java.net.UnknownHostException: esp50ws19444-7]
[ 18/01/12 14:52:23] No server running at t3://esp50ws19444-7:7001 or the user/password is wrong
1) With WLST on comand prompt, I am able to connect to t3://esp50ws19444-7:7001
2) I tried using the 'IP address' and Full DNS name 'esp50ws19444-7.CRB.APMOLLER.NET' but BPM configuration still fails
3) Referred below threads but no success,
UnknownHostException during OBPM Enterprise Setup
[Urgent]Oracle BPM 10gR3 integrate with Oracle weblogic 10gR3 failed.
Unable to configure the Directory in BPM Enterprise Edition for WebLogic
WLST Failed in Oracle BPM Enterprise for Weblogic Server
I see that my C:\windows\system32\drivers\etc\hosts file is empty and it says that the name resoultion is managed in DNS itself.
Giving localhost and computername/ipaddress in 'hosts' file did not help me.
Can anybody tell me if this can be resolved?
Regards,
Akshay

Hi,
I am really surprise to see this behavior,
weblogic is able to connect to t3:server:port and OBPM is refusing to connect in WLST
Anybody can let me know why is this behavior?
Regads

How to install Workshop for WebLogic and WebLogic Portal?

Hi All,
I am new to Weblogic Portal. I would like to start learning Oracle Weblogic Portals..
Can anyone please guide me, how to install Workshop for WebLogic and WebLogic Portal?
As per the ""Tutorials – Getting Started with WebLogic Portal"" (http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/setup_dev_env.html)
we need to install the Workshop for WebLogic and WebLogic Portal.
Please suggest me where should i get the required environments/IDE?
Thanks,
Harish.

Hi Harish
1. If this is your first time with Weblogic Portal, I would recommend to download the latest Weblogic Portal Software Rel 10.3.2 from this bottom link. Check Accept Radio button, for windows download windows installer. Its about 1 GB file. This software includes Eclipse IDE, Weblogic Server and Weblogic Portal.
http://www.oracle.com/technology/software/products/wlp/index.html
2. During the installation process, make sure at one point you select Custom mode (NOT default Typical mode). In next following screens you will see all bundles checked EXCEPT for Samples. So make sure you check Samples Check box both under Weblogic Server and Weblogic Portal. Then proceed. This will install full Weblogic Workshop (Eclipse IDE), Weblogic Server and Weblogic Portal. This is the good installation package. Also it will install samples for Portal and Server. If you select all default typical mode, it will NOT install samples. You can install samples later on also, but its good at installation time itself you select custom and check Samples also.
3. WLP 10.3.2 uses Eclipse IDE. If you are familiar with Eclipse IDE this should be helpful. Otherwise also, its ok.
4. For learning WLP, in Eclipse IDE, you need to create Portal EAR Project, then Portal Web Project. Inside portal web project create simple jsp hello world portlets and a simple portal.
5. For Deploying and Testing Portal application you need to create Portal Domain using config wizard. You can see this from Start -> Programs -> Oracle Weblogic Portal shortcut -> Weblogic Server -> Tools -> Configuration Wizard.
6. You can start Workshop IDE from Start -> Program Files -> Oracle Weblogic Portal ...-> Eclipse For Weblogic 10.3.2
Here are the links for quick start guide for portal development. Please do refer them.
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/index.html
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/quickstart/newproject.html
HTH
Ravi Jegga

Do I need to set system env variables for weblogic and SOA server installation?

Hi All,
   I already have two weblogic application servers on my machine(that were installed by others).
I observed some environment variables were also set in System variables(ORACLE_HOME,WEB_SERVER_HOME etc) section in Env variables section(Start Menu---> Computer --> properties ---).But why do we need to have system environment variables wherein we already have those variables in files like setDomainEnv.bat or/and setSOADoaminEnv.bat for each server.
And one more thing system variables will be applicable for all servers(the whole machine) right.It may spoil the installation of new servers and present servers as variables should be unique to each server.
    I want to install weblogic and SOA server installation.
So Can I remove the existing system variables(as they will applicable for every server) and install weblogic and SOA server installation without setting up the environment variables?
Especially I have multiple Weblogic servers,In that case how it would be to have environment variables(JAVA_HOME,WL_HOME,ORACLE_HOME etc)?
Please guide me on this to installl SOA suite .
Thanks in advance

Hi All,
   I already have two weblogic application servers on my machine(that were installed by others).
I observed some environment variables were also set in System variables(ORACLE_HOME,WEB_SERVER_HOME etc) section in Env variables section(Start Menu---> Computer --> properties ---).But why do we need to have system environment variables wherein we already have those variables in files like setDomainEnv.bat or/and setSOADoaminEnv.bat for each server.
And one more thing system variables will be applicable for all servers(the whole machine) right.It may spoil the installation of new servers and present servers as variables should be unique to each server.
    I want to install weblogic and SOA server installation.
So Can I remove the existing system variables(as they will applicable for every server) and install weblogic and SOA server installation without setting up the environment variables?
Especially I have multiple Weblogic servers,In that case how it would be to have environment variables(JAVA_HOME,WL_HOME,ORACLE_HOME etc)?
Please guide me on this to installl SOA suite .
Thanks in advance

Workshop for weblogic and spring 2.0.6 not working on weblogic 92

Hi,
I try to use workshop for weblogic 10.1 to create a web project using spring mvc framework and deploy it to a weblogic 9.2 server, and it gives me the error.
Here's what I have done:
Create a 9.2 server.
Create a web project with spring facet, I downloaded spring 2.0.6.
I created a test jsp page along with applicationContext.xml and springServlet.xml spring support.
When I start the server and publish the ear to the server,
I got the following error:
Aug 28, 2007 9:18:03 AM EDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Aug 28, 2007 9:18:27 AM EDT> <Error> <HTTP> <BEA-101216> <Servlet: "SpringContextServlet" failed to preload on startup in Web application: "springmvcWar".
java.lang.NoClassDefFoundError: weblogic/i18n/logging/MessageLoggerRegistryListener
 at java.lang.ClassLoader.defineClass1(Native Method)
 at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
 at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
 at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:338)
 at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:291)
 Truncated. see log file for complete stacktrace
I couldn't find the class weblogic/i18n/logging/MessageLoggerRegistryListener anywhere.
Does anybody have seen this error before.
Thanks
maildt

Hi,
I tried the scenario against 9.2mp1 server and 9.2mp2 server and the publish worked fine.
The only difference is the jsp file you created
Can you remove your jsp file and see if the publish still fails?
Which version of 9.2 server are you using? Also, what all facets are you using other than spring?
Can you also try something and see if it helps?
1. Open a new workspace
2. In Window -> Preferences -> WebLogic -> J2EE Libraries, removed the logging bridge libraries (the 10.0 version) and re-added these libraries from a 9.2 installation.
Basically they are
wls-commonslogging-bridge 1.0/1.0
wls-commonslogging-bridge-war 1.0/1.0
wls-commonslogging-bridge 1.0/1.1
wls-commonslogging-bridge-war 1.0/1.1
and add 2 jars from 9.2_BEA_HOME/weblogic92\common\deployable-libraries
3. Create web project and follow the other steps
Thanks
Vimala

OS user ids for weblogic and OBIEE11g

Hello Experts
One of our client asked us whether we should use the same OS user credentials OR different for installing weblogic and OBIEE11g on AIX server. If yes why , If no then why.
I know that we need to install weblogic first and then OBIEE11g - SOFTWARE ONLY .
Also if could provide the link for the step by step installation /configuration of weblogic and obiee 11g on AIX 7.1.
Thanks

894860 wrote:
Hello Experts
One of our client asked us whether we should use the same OS user credentials OR different for installing weblogic and OBIEE11g on AIX server. If yes why , If no then why.
I know that we need to install weblogic first and then OBIEE11g - SOFTWARE ONLY .
Also if could provide the link for the step by step installation /configuration of weblogic and obiee 11g on AIX 7.1.
ThanksRefer to this link for instructions on installation: http://satyaobieesolutions.blogspot.in/2012/08/obiee-installation-on-aix-obiee-11g.html
It is usually recommended to use the same user because of the issues with permissions on the files and folders when using different accounts for installating different components.

Workshop for WebLogic and Solaris

I know there is no support for this currently. Is this something which may change down the road?
I am one of a few people in our company that would like to be able to do development on our solaris x86 boxes, but end up having to remote desktop into a development windows server in order to be able to do so.
another option/question, would it be possible to just get the weblogic plugins - assuming we have support - in order to put them into eclipse ourselves since we can get eclipse for solaris x86. It isn't that we NEED the plugins, but it does make some of the work much nicer/easier.
thanks
t-

I'm not aware of planned Solaris support, but will check on that.
The next release of Workshop for WebLogic will allow you to use an existing Eclipse rather than requiring you to use the Eclipse it installs.
-Chris

OBPM Enterprise for Weblogic 10.3 配置问题

我能够安装OBPM weblogic 企业版，但是配置directory时候，不管是在已经建立好的weblogic域上还是使用向导，都在70-72%（运行WLST）的时候失败。
INFO: Completed initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'
<Aug 13, 2009 9:09:06 PM CST> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM D
UAL" set up for pool "BPMServerDS" failed with exception: "java.sql.SQLRecoverableException: Io exception: Connection reset".>
<Aug 13, 2009 9:09:06 PM CST> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM D
UAL" set up for pool "FDIDS" failed with exception: "java.sql.SQLRecoverableException: Io exception: Connection reset".>
<Aug 13, 2009 9:09:07 PM CST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "BPMServerDS": The Network Adapter could not establish the connection>
<Aug 13, 2009 9:09:07 PM CST> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "FDIDS": The Network Adapter could not establish the connection>

Hi,
Event I am facing the similar problem but its irrregular(but most of the time). I get following as a log while shutting down the server.
Stopping Weblogic Server...
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to t3://localhost:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'atg
_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Shutting down the server AdminServer with force=false while connected to AdminSe
rver ...
And it countinues...
Regards,
Kevin Chheda

Problem with Business Rules in OBPM 10.3.1 Enterprise for WebLogic

We're having a problem with our Business Rules. We've updated two of our business rules (that are used by business rule transitions) in Studio; however, when we publish the updated process, the business rules are not updated. We cannot find anywhere in the Process Admin where to administer the rules to make sure they're overwritten.
I've double checked, and the updated rule code is in the .project.xpdl, but for whatever reason, the rules are not being updated during the deployment. I'm sure that we've done this many times in the past, but for some reason, now it is not working.
We're tried variations of the different versioning when we publish, and we've also tried to unpublish all of the older versions of our process, but it does not change the business rules. We can try to unpublish and undeploy, but it seems like we would lose all old instances of that process that are still running if we did that.
Has anyone ever had this issue, or know if there is a way to effect the business rules via the process admin?

I see what you're saying, but here's why it works the way you're observing it.
Once deployed, the 10g business rules are edited by a business user (the owner of the rule). Changes in Studio that a developer makes to a business rule don't override the changes that the business user made.
To let the business owner edit the rule, add a Global Interactive activity and change its property setting to edit the business rule. Put this activity in the role for the business owner (the person you want to edit the rule).
Dan

BPM Enterprise installation

I will install BPM EM Weblogic to Redhat. I read the installation guide. It shows that the BPM Enterprise should be installed in Redhat Linux 4 and 5.
Is Redhat Linux 4 and 5 are Redhat Enterprise Linux?

Hi,
I probably don't have the right answer to your question. However, we did install BPM Enterprise for weblogic on RedHat 5 in our local environment.
Hope this helps,
Rudraksh

Single Client Access Name for Weblogic Forms and Reports.

I have a 2 node clustered system:
Windows 2008 R2 64-bit
Weblogic 10.3.3 (on each node)
Weblogic Forms and Reports 11.1.1.3 (on each node)
Database 11gR2 RAC 11.2.0.1 (on each node)
The forms and reports are clustered and I can connect to each from each of the two servers and the cluster is working well.
The database uses Single Client Access Name (SCAN) to present the database as if it were one server called dbserver1.
I was wondering if there was a similar thing for Weblogic and what everyone else uses to present their application as a single name to the user.
I tried using Windows Network Load Balancing, but this stops the database scan listeners from working.
Thanks.

Dear,
Did you find an answer to your question back in 2009?
We are facing the same installation architecture, but we do not find any concrete information regarding SCAN with Oracle Forms 11g
Geert

Differences b/w Oracle Workshop WebLogic and Oracle Eclipse Enterprise Pack

What are the differences between the Oracle Workshop Studio for WebLogic and the Oracle Eclipse Enterprise Pack

While both OEPE and Workshop are Eclipse-based IDEs, they are in fact separate products with some similarities
Both products provide tooling for webapp and Java EE development for Weblogic Server but OEPE is Oracle's strategic Eclipse-based solution and new features are released as OEPE plugins. One goal for OEPE is to cover and eventually exceed Workshop's feature set. You can start to see that today in OEPE 11g's JPA, Spring, and Weblogic Server. For example, JPA support in OEPE 11g is available on more project types, like EJB and Utility Projects, and has better Entity source code completion and validation against the schema. OEPE's Weblogic Server support includes new graphical editors for the common deployment descriptors, like weblogic.xml, which simplifies adding new content, validation, and accessing context sensitive help.
Also, with OEPE we are more active in the Eclipse community with participation in WTP projects like JSF Tools and Dali. In fact, in Eclipse 3.5 the new JPA Entity generation wizards were originally developed as part of OEPE 11g and contributed to WTP.
Finally, if you need support for the latest Eclipse, OEPE's frequent release schedule keeps us supporting new Eclipse versions much faster than we were able to with Workshop.
If you are debating between OEPE and Workshop for new projects, I would definitely recommend that you give OEPE a try.
Thanks,
Greg

To launch Oracle BPM deployed Web Services [In BPM Enterprise]

Hi all,
I have expose my Process Instance into Web Services in Studio.
It is working well. In Studio, I start the Engine (Run -> Start Engine),
Then, I Start the Web Services (Run -> Launch deployed Web Services webapps).
It would show me my local webservice links.
http://localhost:9000/albpmServices/<ProjectName>/ws
But, I unable to launch this Web Service Webapps, when i deploy the project into Oracle BPM Enterprise with Weblogic Server.
May know what is the link for BPM Enterprise?
Regards,
Chris

My URL is:-
http://localhost:9000/albpmServices/TestProject/ws/TestProcessServiceListener?wsdl=true
and it does not seem to open the WSDL when I start the enterprise server engine..
I have the process exposed as a web-service with two methods..
One for Process Creation and another for Notification Wait Activity...
I have also checked the box to start PAPI WS Services on my standalone server
Is there some other config that I need to make inside my standalone server to get this WSDL?
I understand that standalone works on Tomcat...

BPM Enterprise for weblogic and clusters

Similar Messages

Maybe you are looking for