BPM n:1 scenario(file-file). everything is fine.output file not genarating

Hi friends,
I am doing a BPM N:1 scenario,
1.my ip(integration process) is at status 0 in sxi_cache.
2.No problem with SWF_XI_CUSTOMIZING.
3.after running my 2 commumication channels for 2 input files the flag is correct(black n white) in MONI.
But when i see the file in destination directory , it's not appearing there.
Any suggestions???

Hello,
Check all the queues SM58, SMQ1, SMQ2. Check the RWB for the messages on the adapter engine.
Also, you will have to check the workflow log. Go thru the following steps.
Scroll the successful message in the monitor to the right to see columns like Inbound or Outbound. You will see a value PE in one of the column. On clicking it, you will go into the workflow log. Then, goto the technical details. You will see all the steps configured in the BPM and various tabs below which gives minute details about each step. Look for errors in any of the step bu going thru the details.
There might be the case that the mapping itself might have gone into error. Or some step inside the BPE is in a waiting mode.
Regards,
Akshay

Similar Messages

I have a file that was created in FH 11 and I am using same version.Originator opens file and everything is fine and also earlier version opens it fine.when I open it the links shift 1/8" up and left.Has anybody had this happen to them

I have a file that was created in FH 11 and I am using same version.Originator opens this file and everything is fine and also an earlier version opens it fine.When I open it it shifts the links 1/8" up and to the left.Has anybody ever had this happen to them?

What file format(s) are the "links"?
If raster images, do they contain clipping paths or transparency?
What is your platform and OS?
Were the FH documents created on the same platform (Mac or PC) as the one you are currently using?
Were the linked files created on the same platform (Mac or PC) as the one you are currently using?
Can you reproduce the problem with a newly created document and the same linked images?
There was once an issue with transparent 1-bit TIFF images shifting, but I believe that was in a previous version of FH.

How to change the layout of an input file and write to an output file

Hi
I have a .csv file which has a layout as schoolNo. , county1,county2,county3,county4,county5
It will need to go into an output file as schoolNo. repeated and a county on each record .
ie., schoolNo.,county1
schoolNo.,county2
schoolNo.,county3
schoolNo.,county4
schoolNo.,county5
I wrote the java program as follows ..which results in this error
Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException
BECAUSE :--
i know bec., the first record doesnot have county3,county4,county5 . So when the if loop for county3 lenght is checked it gives this exception .
Pls help me write this program ..thanks in advance .
/Here I open the input file and read in record by record
          BufferedReader readin;
          try {
               readin = new BufferedReader(new FileReader(InFile));
               String firstLine = readin.readLine();
               String[] headers = firstLine.split(",");
               columnCount = headers.length;
               System.out.println("Columns in ZIP Master File: "+columnCount);
               for(String input ;(input = readin.readLine()) != null; ){
                    recCount++;
                    input = input.substring(1);
                    String[] column = input.split(",");
                    if(columnCount == 10){
                         eachIP++;
//                               OUTPUT FILE
                              if(column[1].length()> 0) {
                                   String mainStr = column[0] + "," + column[1] ;
                                   Count++;
                                   totalcolumns++;
                                   writeOutFile.write(mainStr);
                                   writeOutFile.newLine();
                              else{
                              bypassedCount++;
                              if(column[2].length()>0){
                                   String mainStr = column[0]+ "," + column[2];
                                   Count++;
                                   totalcolumns++;
                                   writeOutFile.write(mainStr);
                                   writeOutFile.newLine();
                              else{
                              bypassedCount++;
                              if(column[3]..length()>0){
                                   String mainStr = column[0]+ "," + column[3];
                                   Count++;
                                   totalcolumns++;
                                   writeOutFile.write(mainStr);
                                   writeOutFile.newLine();
                              else{
                              bypassedCount++;
                             }

There are two split( ... ) methods; check the other one (the one with two arguments), it allows for empty entries to be counted, i.e. split(inputString, -1) gives you the wanted results.

Positional flat file schemas for input and output files to be generated with the required usecases

Hello all,
I need one help regarding the positional flat file schema which contains multiple headers, body and trailers.
I have attached the sample input file below. This is a batched input and we have to generate the output which I have given below:
We are unable to flat file schema which replicates the below input file. Please suggest better approach to achieve this.
Sample Input FIle:
010320140211ABC XYZ XYZ ABCD201402110 FSPAFSPA005560080441.02000006557.FSPA.IN AB-CD ABCD/AB-CD BETALKORT
1020140210AN194107123459.FSPA.IN
[email protected]
1020140210AN196202123453.FSPA.IN
[email protected]
1020140210AN198103123435.FSPA.IN
[email protected]
1020140210AN195907123496.FSPA.IN
[email protected]
1020140210AN195903123437.FSPA.IN
[email protected]
1020140210AN193909123434.FSPA.IN
[email protected]
1020140210AN195607123413.FSPA.IN
[email protected]
1020140210AN199205123408.FSPA.IN
[email protected]
1020140210AN196206123499.FSPA.IN
[email protected]
1020140210AN196709123410.FSPA.IN
[email protected]
1020140210AN194708123455.FSPA.IN
[email protected]
1020140210AN195710123443.FSPA.IN
[email protected]
1020140210AN198311123436.FSPA.IN
[email protected]
1020140210AN196712123471.FSPA.IN
[email protected]
1020140210AV197005123403.FSPA.IN
98000000000000014000000000000001000000000000015
010320140211ABC XYZ XYZ PEDB201402111 FSPAICA 005560080441.02000006557.FSPA.IN AB-CDABCD/ABCDBETALKORT
1020140210AN195111123491.ICA.IN
[email protected]
1020140210AV195309123434.ICA.IN
98000000000000001000000000000001000000000000002
Output FIle:
1020140210AN195607123413.FSPA.IN
[email protected]
1020140210AN199205123408.FSPA.IN
[email protected]
1020140210AN196206123499.FSPA.IN
[email protected]
1020140210AN196709123410.FSPA.IN
[email protected]
1020140210AN194708123455.FSPA.IN
[email protected]
1020140210AN195710123443.FSPA.IN
[email protected]
1020140210AN198311123436.FSPA.IN
[email protected]
1020140210AN196712123471.FSPA.IN
[email protected]
1020140210AN195111123491.ICA.IN
110019EPS [email protected]
1020140210AV197005123403.FSPA.IN
1020140210AV195309123434.ICA.IN
98000000000000001000000000000001000000000000002
99000000000000001
Note: Header is a single line till BETALKORT and also there is a space before email id. That is not getting pasted properly in the files.
Thanks and Regards,
Veena Handadi

Hi all,
Header is missed from the output file for the above post:
Please find the output file:
010320140211ABC XYZ XYZ ABCD201402110 FSPAFSPA005560080441.02000006557.FSPA.IN AB-CD ABCD/AB-CD BETALKORT
1020140210AN195607123413.FSPA.IN
[email protected]
1020140210AN199205123408.FSPA.IN
[email protected]
1020140210AN196206123499.FSPA.IN
[email protected]
1020140210AN196709123410.FSPA.IN
[email protected]
1020140210AN194708123455.FSPA.IN
[email protected]
1020140210AN195710123443.FSPA.IN
[email protected]
1020140210AN198311123436.FSPA.IN
[email protected]
1020140210AN196712123471.FSPA.IN
[email protected]
1020140210AN195111123491.ICA.IN
110019EPS [email protected]
1020140210AV197005123403.FSPA.IN
1020140210AV195309123434.ICA.IN
98000000000000001000000000000001000000000000002
99000000000000001

Output File from the Saudi Payment Output File

Dear All ,
I want to ask where did oracle save or store the output file after I ran the request Saudi Payment Output File.
I need to see the file , to send it for the Bank.
best Regards.

Pl post details of OS, database and EBS versions. Did the concurrent program complete without errors ? Pl post the contents of the concurrent log file.
Pl also see MOS Doc 553518.1 (What is the Extension of Saudi Payment output file ? And where it is exist ?).
HTH
Srini

Creating .RTF output files - PI7.0 Receiver file adapter

Hi Experts,
I am currently facing an issue with the Receiver File adapter where in the output files are required to be of the format of .RTF (Rich Text Format).
The scenarios is an outbound proxy from SAP ABAP - > PI 7.0 -> .RTF File
All the data required to be present in the file will be coming in the source structure
Can the File Receiver Adapter handle this ?
Is there a way to generate Files with extension .rtf ??
It is a requriement since the output files will be used as Reports , and so the desired format.
I am unsure if I will have to use XSLT mapping , in this because i am new to that , Kindly let me know how to go about it ,. any links or pointers on how to achieve the same will be welcome.
thanks
Dev
Edited by: sd on Feb 17, 2010 8:23 AM

Thanks for your reponse Praveen
Can you please let me know how can i put the extension as .rtf for the output files i am generating ??
as far as the formatting is concerned ... it is like ... the header needs to be of a particular Font , a particular font size , bold etc and so is the case for line items
I am unsure if it is possible using an Adapter module as well
thanks
Dev

Using Output files in businesses

Hi,
I've used captivate for my own small business but now am employed elsewhere and want to know if anyone has any idea about licensing issues with using the output files from captivate in a business that doesn't/hasn't purchased the actual program?
I have a legal copy on my personal PC and create the files there then transfer the output file to my work. They have expressed ome concern as they don't own the program. Everything in the product license agreement seems to talk about the actual program, not what you create with it.
Can anyone direct me where I might find this kind of info? Is it just classed as a shockwave file (which my employer does have license for)
Thanks.

Hi there
I've poked around the Adobe site a bit as well as Googled and Googled. Either I'm using the wrong terms or the information simply isn't there. The bottom line is that we all understand that whatever you create using Captivate is owned by you. There is no restriction placed on use of the content you create.
It's the same issue with any software used to create content.
Does Microsoft Paint impose a restriction on how you use images created using it?
Does Microsoft Word, Excel, PowerPoint or other do the same?
Sure, if you want the end user to be able to modify your creation they will need their own license for Captivate to view and make edits. But all they need to simply view the content is the Flash Player.
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Ldconfig: File /usr/lib/libX.so is empty, not checked.

Heyho,
everytime I install something with pacman, it says following after installing successfully (at least i guess, everything works fine)
ldconfig: File /usr/lib/librdf.so is empty, not checked.
ldconfig: File /usr/lib/libgraphite.so.3 is empty, not checked.
ldconfig: File /usr/lib/libraptor.so.1 is empty, not checked.
ldconfig: File /usr/lib/libgsf-1.so.114.0.20 is empty, not checked.
ldconfig: File /usr/lib/libwpd-0.9.so.9.0.1 is empty, not checked.
ldconfig: File /usr/lib/libgsf-1.so is empty, not checked.
ldconfig: File /usr/lib/librasqal.so is empty, not checked.
ldconfig: File /usr/lib/liblpsolve55.so is empty, not checked.
ldconfig: File /usr/lib/libwpd-stream-0.9.so is empty, not checked.
ldconfig: File /usr/lib/libraptor.so is empty, not checked.
ldconfig: File /usr/lib/libgsf-1.so.114 is empty, not checked.
ldconfig: File /usr/lib/libwpd-0.9.so is empty, not checked.
ldconfig: File /usr/lib/librdf.so.0 is empty, not checked.
ldconfig: File /usr/lib/libhyphen.so is empty, not checked.
ldconfig: File /usr/lib/librdf.so.0.0.0 is empty, not checked.
ldconfig: File /usr/lib/librasqal.so.2 is empty, not checked.
ldconfig: File /usr/lib/libwpd-0.9.so.9 is empty, not checked.
ldconfig: File /usr/lib/libwpd-stream-0.9.so.9.0.1 is empty, not checked.
ldconfig: File /usr/lib/libhyphen.so.0.2.0 is empty, not checked.
ldconfig: File /usr/lib/libgraphite.so is empty, not checked.
ldconfig: File /usr/lib/librasqal.so.2.0.0 is empty, not checked.
ldconfig: File /usr/lib/libhyphen.so.0 is empty, not checked.
ldconfig: File /usr/lib/libwpd-stream-0.9.so.9 is empty, not checked.
ldconfig: File /usr/lib/libraptor.so.1.2.0 is empty, not checked.
ldconfig: File /usr/lib/libgraphite.so.3.0.0 is empty, not checked.
How do I fix this?

I believe this might be your answer?

DMEE : Delete Trailing spaces in the output file..

Dear Friends
I am using a DMEE Tree t generate a payment file.
Everything is fine except that teh bank requires the trailing spaces to be deleted.
i.e. I am getting an output like below but with spaces in place of dots
:50H:/09618078222002EUR....................<CR/LF>
Sana'a............................................ <CR/LF>
:70:DMEE-TEST14.................<CR/LF>
Note:The dots represents spaces which I want to remove. The dots are added to show you the output...
The <CR/LF> is printing at the end of the field length. I mean if the field is 34 Chr long then the
<CR/LF> is getting printed at 35th Char irrexpective of teh field contents...
But the bank requires in the below format. i.e. remove the spaces thats all.
:50H:/09618078222002EUR<CR/LF>
Sana'a<CR/LF>
:70:DMEE-TEST14<CR/LF>
Can anyone help.
I am working on SAP 4.6C
Help will surely be reawrded....

Hello Sam,
I DO NOT know if i can make you understand the logic, but will give it a try )
The <CR/LF> is printing at the end of the field length. I mean if the field is 34 Chr long then the
<CR/LF> is getting printed at 35th Char irrexpective of teh field contents...
You define an element of length 35 char, then in the "Mapping Procedure" select the "Own Mapping (Atoms)" & set the "Atom Handling" as 01 (Concatenate values in element).
Then create the ATOMS: one with the value "DMEE-TEST14" & the other atom with the value "<CR/LF>
". The output will be a concatenation of the two fields )
Did you get what i wanted to tell you )
BR,
Suhas

Output File not generated

Hi All,
I am using the Report Builder 10.1.2.0.2 on windows 7 Professional version ( 32-bits) , I am connecting to data base, compliing and Running the Report for paper layout it gives me the preview but when I am trying to generate the output file(either format) then no output file is created.
it is not showing any error message either. what may be the reason ?
Thanks in Advance.

Rajan
What I understand from your saying is:
With a program R/3 is generating a File. So here there is no XI role.
Then XI is picking this file and sending to FTP server. So File-XI-File scenario. First of all are you sure that your R/3 is generating the file what XI is expecting? If yes then your XI will pick up and you will see in SXMB_MONI. If not first find out whether it is generating or not. If it generates and if you are unable to pick the file then check the authorisations. Also if you are doing Content conversion kindly go to adapter monitor and find out whether you can see any error?
Regards,
---Satish

Should not create any output file when transform with xslt file

I have a xslt file, which I have make code to check the order status value.
If OrderStatus != 'Reject' --> create attribute, element for output file
Else OrderStatus = 'Reject' --> do not create attribute/element ==> output is the empty file.
Requirement: if OrderStatus = 'Reject' --> do not create any output file.
how to do with this requirement?
any help will be appreciated!

Do you mean the xslt file always return the output file?
I have tested this xslt file following (only xslt file, not run in BizTalk project):
Create a blank console application using visual studio and add attached xslt file to newly created console app. Next open the XSLT file and select input file and output files and start xslt debugging to create output file.
I want to edit the xslt file how to cannot create output file in the case OrderStatus = Reject.
I don't say in particualr xslt file, its actually your map as a whole that returns a output message on successful execution.
since you are testing the xslt file as individual file, you are able to control it as per need. i mean you can write incomplete code or any kind of output elements that are not present even in schema. But when you set the map properties to use external
xslt , map completely relies on xslt and xslt has to produce output that matches the output schema structure.
So you better test your xslt by setting it to your map. Once you set map properties to use xslt, you can test your map by right clicking on map and choosing test map.
Please mark the post as answer if this answers your question. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Name syntax of output file from FMLE 3.2 ?

Hi,
I'm using FMLE3.2 to live streaming and save output files (sample.f4v). My output files name is:
sample.20120424_100235.f4v
sample.20120424_100438.f4v
sample.20120424_100641.f4v
sample.20120424_100840.f4v
I think 20120424 is date, today is 04/24/2012. But I don't understand 100235, 100438, 100641, 100840... What is it?
How to distinguish between the files to play in the order ?

Hi,
the short text description for WRITE_FIELD_SEPARATOR is "Separate Columns by Tabs in Case of ASCII Download", so why do you expect a comma?
Try SAP_CONVERT_TO_CSV_FORMAT and then download.
And no, GUI_DOWNLOAD is only for download via SAP GUI to a users computer.
Best regards,
Oliver

'Create Settlement Batches' Request and Output file name

Hello,
Is there a table/view which keeps 'Create Settlement Batches' request id and name of the output file of that request ?
Output file is created in 4456_1.out format. I can see this file name in IBY.IBY_BATCHES_ALL table BATCHID column and
IBY.IBY_TRXN_SUMMARIES_ALL table BATCHID column. Non of the tables do not contain the concurrent request id.
How can we find out from tables/views the name of the output file, if you know the request id ?
Thank You,
sruwan

Hi Hussein,
I already looked at FND_CONCURRENT_REQUESTS. It doesn't contain the output batch file name. It has a column called 'OUTFILE_NAME' and it points to
a file called concurrent_request_id.out file ( Eg: 123456789.out ). This file is blank when you run 'Create Settlement Batches' request.
'Create Settlement Batches' request also crates an output batch file in the format 1234_1.out. Problem is finding a pace linking that file name to concurrent request id.
Thanks for your reply,
sruwan

Renaming output files

I've renamed my RoboHelp 8 Project file name, as well as the TOC and Index names.
However, there are several output files containing the old project name. Is there a place within
RoboHelp where you edit the Project file name so that all output files will reflect the same name?
I renamed the Project name using File - Rename Project....

Hi there
What output files are you concerned with? I think RoboHelp 8 will not rename the source files for the TOC, Index, Glossary. But those don't appear in your output files as such. So it likely won't have any effect on your output or ability to deal with the files.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

BCP does not leave output file handle

We are executing BCP utility to bulk load files into tables. The utility is spawned from dll (C# code) with following parameters
Complete_Table_Name + " IN " + Input_File_Name + " -S" + Server_Name + " -U" + Username + " -P" + Dec_Password + " -c -C RAW -e " + Error_File + " -o " +
Output_File + " -h TABLOCK "
Note that the output file is created on a network location.
The utility is spawned with the following code
Process BCP_Process;
BCP_Process = Process.Start(BCP_Path, BCP_Parameters);
BCP_Process.WaitForExit();
After the bcp process completes we open the log file as below
StreamReader sr = File.OpenText(Output_File);
This piece code randomly fails with the below exception
System.IO.IOException: The process cannot access the file '<network-path-to-the-output-file>' because it is being used by another process.
It seems that the BCP utility does not release the handle to the output file and hence we get the exception. I understand that opening the file can be opened by using another FileStream constructor in READWRITE fileShare mode, but I wanted to understand why
does bcp hold the output file handle or is there something incorrect in what we are doing?
We monitored the network location for file creations, modifications and deletes. I saw that the log file was created, modified and deleted multiple times during a single bcp invocation.
What could be the reason that the output file is created, modified and deleted multiple times during a bcp execution?
Thanks.
Technet Forum Issue

I have absolutely zero time to research this now, but if you run BCP synchronously and wait for it to complete, it can not be holding any locks on the file. It must be something else, for instance an anti-virus scan.
Why the output file opened and deleted multiple times during execution, I don't know.
Erland Sommarskog, SQL Server MVP, [email protected]

BPM n:1 scenario(file-file). everything is fine.output file not genarating

Similar Messages

Maybe you are looking for