BpmPatternCollectTime Timeout problem

Hi Frnds,
I have a BPM design which is a simple BpmPatternCollectTime With a block and loop for collecting messages.The timeout set for the block is 1min.
i Triggered one idoc and workflow was started and i triggered another idoc after a min also the idoc was entering the same workflow?
what could be the problem.

when you have defined a correlation, make sure that this is restricted to the block with the loop.
If the correlation is valid for the whole process, the message is assiged to that process even when the timeout has occurred.

Similar Messages

Timeout problem

Case
Case 180396
Title: WebLogic Server - TImeout problem
Owner: ClearExpress WebEval Case Type: Administration
Condition: Open-Dispatch Severity: Evaluation
Status: Need Initial Contact
Site Name: Transactions Unlimited Inc Site ID: IND001180
Address: 1308 oak Lake Ct City, State, ZIP: San Jose, CA 95131
Contact: Serisha Nagothu Phone: (408)330-4840
Case History:
*** NOTES 29-JUN-2000 09:56:15 [29-JUN-2000 15:56:15 None] webeval
*** Logged by contact: Serisha Nagothu, (408)330-4840
Product=WLS 451
Revision=(Release Level)= 451
Problem Description= NSAPI - WL
OP = Solaris 2.6
Hi,
In my product, I have an operation where I upload files to my website.
When I am uploading smaller size files I am not facing any problem. But when
I upload large size files (eg 10 MB) it is happening multiple times. I did
not face this problem on Windows NT. Only on Solaris I am experiencing this.
So we wrote a simple servlet to find out what is exactly happening. I am
getting timeout. I connect to WebLogic Server through Netscape Web Server
which is running on another Solaris. I tried to increase the connection
timeout in Netscape Server. It did not provide any results to me. When I
checked the logs on NSAPI, it is connecting to WL properly, the problem is
from WebLogic. Apart from the Session Timeout in Deployment Descriptor is
there any where that weblogic has a timeout settings. I want to know about
this in detail. It is very very urgent.
Here is the way my bean works, it reads the file from disk and copy it
to temporary location and then do the upload. When it started reading, it is
fine and then when it is uploading, it is getting timeout so, it started
reading the file again, it is happening till it gets out of space error.
Please let me know what is the solution, as immediately as possible. I
would really really appreciate your help.
Thanks in advance
[blank.gif]

What service pack you are using? If you are using 451 SP8 or recent then it has
a new
plugin parameter called - "HungServerRecoverSecs". Here are the details:
HungServerRecoverSecs 10:300:600 for (min:default:max)
You should set this to a very large value. If it is less than the time the
servlets take
to process, then you will see unexpected results. This implementation takes care
of the
hung or unresponsive servers in the cluster. So the plugin waits for
HungServerRecoverSecs for the the server to respond and then declares that
server dead
and fails over to the next server.
Maybe this is what you are seeing. If the value is too low it will failover and
the POST will
happen multiple times.
Let us know if this problem persists.
--Vinod.
Serisha wrote:
Case
Case 180396
Title: WebLogic Server - TImeout problem
Owner: ClearExpress WebEval Case Type: Administration
Condition: Open-Dispatch Severity: Evaluation
Status: Need Initial Contact
Site Name: Transactions Unlimited Inc Site ID: IND001180
Address: 1308 oak Lake Ct City, State, ZIP: San Jose, CA 95131
Contact: Serisha Nagothu Phone: (408)330-4840
Case History:
*** NOTES 29-JUN-2000 09:56:15 [29-JUN-2000 15:56:15 None] webeval
*** Logged by contact: Serisha Nagothu, (408)330-4840
Product=WLS 451
Revision=(Release Level)= 451
Problem Description= NSAPI - WL
OP = Solaris 2.6
Hi,
In my product, I have an operation where I upload files to my website.
When I am uploading smaller size files I am not facing any problem. But when
I upload large size files (eg 10 MB) it is happening multiple times. I did
not face this problem on Windows NT. Only on Solaris I am experiencing this.
So we wrote a simple servlet to find out what is exactly happening. I am
getting timeout. I connect to WebLogic Server through Netscape Web Server
which is running on another Solaris. I tried to increase the connection
timeout in Netscape Server. It did not provide any results to me. When I
checked the logs on NSAPI, it is connecting to WL properly, the problem is
from WebLogic. Apart from the Session Timeout in Deployment Descriptor is
there any where that weblogic has a timeout settings. I want to know about
this in detail. It is very very urgent.
Here is the way my bean works, it reads the file from disk and copy it
to temporary location and then do the upload. When it started reading, it is
fine and then when it is uploading, it is getting timeout so, it started
reading the file again, it is happening till it gets out of space error.
Please let me know what is the solution, as immediately as possible. I
would really really appreciate your help.
Thanks in advance
[Image]

SharePoint 2010 Application server has SQL timeout problem

Hi All,
Our SharePoint has App & WFE servers, and the SQL server is always on. BTW, App server sometimes has timeout problem as follow, has any idea on it? This problem does not occur timing, our SP 10 is RTM version.
Error Log:
01/29/2015 17:25:29.96 OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (Timer Job job-workflow)
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98 OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
880i High
System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean
breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) at
System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket() at System.Data.SqlClient.TdsParser.ConsumePreLoginHandshake(Boolean
encrypt, Boolean trustServerCert, Boolean& marsCapable) at System.Data.SqlCl...
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98* OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
880i High
...ient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) at
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String
host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString
connectionOptions, String newPassword, Bo...
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98* OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
880i High
...olean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean
redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection
owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection
owningObject) at System.... 5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98* OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
880i High
...Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection
outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.SharePoint.Utilities.SqlSession.OpenConnection()
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98 OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
880k High
at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand
command, CommandBehavior behavior) at Microsoft.SharePoint.Administration.SPDatabase.get_IsReadOnly() at Microsoft.SharePoint.Administration.SPContentDatabaseLockManager.CanProcessContentDatabase(SPContentDatabase contentDatabase)
at Microsoft.SharePoint.Administration.SPWorkItemJobDefinition.Execute(SPJobState jobState) at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService,
Int32& result) at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(Time...
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98* OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
880k High
...rJobExecuteData& data, Int32& result)
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98 OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
880j High
SqlError: 'Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.' Source: '.Net SqlClient Data Provider' Number: -2 State: 0 Class: 11 Procedure: '' LineNumber: 0 Server:
'spsql' 5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98 OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
3355 Critical
Cannot connect to SQL Server. spsql not found. Additional error information from SQL Server is included below. Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98 OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
tzku High
ConnectionString: 'Data Source=spsql;Initial Catalog=WSS_Content;Integrated Security=True;Enlist=False;Asynchronous Processing=False;Connect Timeout=15' ConnectionState: Closed ConnectionTimeout: 15
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:50.98 OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Database
85t4 High
An error occured while attempting to verify that the database is read only for database WSS_Content. The error contained the following message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not
responding. 5a91b888-0f2e-46fe-9ee0-96c81c6581bf
01/29/2015 17:25:51.00 OWSTIMER.EXE (0x0A78)
0x0B08
SharePoint Foundation Monitoring
b4ly High
Leaving Monitored Scope (Timer Job job-workflow). Execution Time=21043.2150707921
5a91b888-0f2e-46fe-9ee0-96c81c6581bf
Thnaks.
Ben

What is the latency (measured via ping) between the App and SQL Server? SharePoint 2010 RTM hasn't been supported for quite some time. Upgrade to SP2 and see if it resolves the issue.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

LCP timeout problem

I got PPP LCP timeout problem with ISDN connection. Line was drop every 20 sec. I already try to change speed already.(56k , 64k). Only saw Open confreq message(BR0/0:1 LCP: O CONFREQ [Closed] id 113 len 32) not reply from other side. Pls advice me for this problem.
Thanks

Thank you Philip. Q931 was successful.But not from same ISDN carrier. It is happen as same as mention in https://supportforums.cisco.com/post!reply.jspa?message=3219791. But I already try to change speed but not working. Any suggestion, pls .
*Mar 14 01:49:10.160: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
! -- Call is connected. PPP negotiation will begin
*Mar 14 01:49:10.168: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1.
*Mar 14 01:49:10.188: BR0:1 PPP: Treating connection as a callout
*Mar 14 01:49:10.188: BR0:1 PPP: Phase is ESTABLISHING, Active Open
[0 sess, 0 load]
! -- PPP negotiation begins
*Mar 14 01:49:10.196: BR0:1 LCP: O CONFREQ [Closed] id 24 len 15
*Mar 14 01:49:10.200: BR0:1 LCP:    AuthProto CHAP (0x0305C22305)
*Mar 14 01:49:10.204: BR0:1 LCP:    MagicNumber 0x545D708A (0x0506545D708A).
! -- Outgoing Configure-Request (CONFREQ)
*Mar 14 01:49:12.176: BR0:1 LCP: TIMEout: State REQsent
! -- Router has not received a CONFREQ from the peer, hence the timeout
*Mar 14 01:49:12.180: BR0:1 LCP: O CONFREQ [REQsent] id 25 len 15
*Mar 14 01:49:12.184: BR0:1 LCP:    AuthProto CHAP (0x0305C22305)
*Mar 14 01:49:12.188: BR0:1 LCP:    MagicNumber 0x545D708A (0x0506545D708A).
*Mar 14 01:49:14.160: BR0:1 LCP: TIMEout: State REQsent
*Mar 14 01:49:14.164: BR0:1 LCP: O CONFREQ [REQsent] id 26 len 15
*Mar 14 01:49:14.168: BR0:1 LCP:    AuthProto CHAP (0x0305C22305)
*Mar 14 01:49:14.172: BR0:1 LCP:    MagicNumber 0x545D708A (0x0506545D708A)

OW4J Notification Timeout problem

Hi!
I made an implementation of ow4j for a timesheet management application. I implemented a custom notification activity which use Apache Velocity for message generation. I re implement the notification process to use the POP3 for reply. Everything works fine for me but with a important exception: The timeout property for the notification which seems to me there is no implementation in engine. The example for OW4J work with the same exception - no timeout.
Is my first workflow experience and I'm disappointed. Dou you have any solution for timeout problem? I tried with the WAIT activity which not works because is implemented only in PLSQL
BR,
Bogdan Craciun

Hi !
I made all the setup stuff but the problem is with the workflow engine. I decompiled the engine and the part with timeout in the workflow definition ( . wft file)loader is skiped. In the JavaEngine the Timeout transition is not treated. There is no background process which monitor the ProcessActivities which are blocked and waiting for replay.
The method getTimeoutValue is never called in the engine. I think there is no implementation fot timeout functionality at this time. The same problem is with Wait Function. In the Java Standard functions from the ow4j demo the call is made to a PLSQL block not to a Java object method.
Correct me if I'm wrong.
BR,
Bogdan Craciun

IView Timeout problems...

Hello,
We're having an iView timeout problem on one of our EP (7) app servers.
(For some reason it only happens on one of them - the others, which use the same iView, don't have this problem):
The message is:
The iView has timed out. There is no cached content to display. Click 'Reload' to retrieve updated content. You may need to wait for the cache to retrieve the content from the source. Reload
Of course the Reload doens't work, but is fixed in SPS14 apparently - we're running SPS13 at the moment.
There are actually 2 iViews that reside on a page, and I've tried adjusting the page timeout to -1, with no results. Only thing we've been able to do so far is restart that one app server, and it seems to remedy the problem...temporarily.
Anyone else have any ideas as to what might be causing this iView to timeout on only one app server and not other others? I'm a bit stumped here as to what to do.
Thanks!
Edited by: Beau Bourgeois on Mar 17, 2008 11:21 PM

Hi,
Please check on the parameters for (right click IView properties --Show All)
1. iViewCaching ..
2.The Timeout.
Please do set them asper requirement.
This will work and you will be able to control the iViewtime outs.
Also lookout for your Page Timeout Property.
HTH
Regards,
Dhruv Shah

Inexplainable Timeout Problem

Hello Everybody,
I am currently developing a Java Webservice for Netweaver 7.11. The web service should trigger the execution of a jar file which is locally available at the server on which the web service is deployed.
The process which is locally executed needs about 60s to be finished.
But when trying to start this process via a web service I get the following message:
Invalid transport binding settings.Read timed out
But this message still appears if I set the timeout settings to a value of 900s, which is definately long enough.
I would be really thankful if somebody has an idea, where the problem is located and how to solve it.
Kind Regards,
Carl Heckmann

Hi Gouray,
Thanks for your reply. I assume, that I configured it correctly, since I exposed 2 web services with this EJB, and the other one is running just fine.
The code of the EJB can be found below. The Service startDataCollectionProcess does not work, due to the timeout problem. The other service, isSystemOnlineCheck works without any problems.:
package com.sap.nwdemo.sidct.services;
@WebService(name = "SIDCTServicesBean", portName = "SIDCTServicesBeanPort", serviceName = "SIDCTServicesBeanService", targetNamespace = "http://sap.com/nwdemo/sidct/services/")
@Stateless
public class SIDCTServicesBean {
      * Starts the data collection process COuld be also started using the
      * console
     @WebMethod
     public Long startDataCollectionProcess() {
          SIDCT sidct = new SIDCT();
          Long duration = sidct.gatherData();
          return duration;
     @WebMethod
     @WebResult(name = "isOnline")
     public boolean isSystemOnlineCheck(@WebParam(name = "SID")
     String sid, @WebParam(name = "InstanceNumber")
     String systemNumber, @WebParam(name = "NetworkID")
     int nwguid) {
I hope this is enough information for you to tell me if the service is configured properly or not.
Kind Regards,
Carl

Timeout problem - record is not shown properly in detail page after timeout

Hi,
I am using JDeveloper 10.1.3.1.0.3984
and JHeadstart 10.1.3.1 Release 10.1.3.1.26
I have a Master View Object where there is a field ID (for example M_VO).
There is a page associated with M_VO (Page_M_VO.jspx)
There is a Detail View Object (for example D_VO)
There is a page associated with D_VO (Page_D_VO.jspx)
There is a link from M_VO to D_VO using the field ID.
When I open the page Page_M_VO.jspx and select an ID and go to the detail page Page_D_VO.jspx, it goes to the detail page Page_D_VO.jspx. It works fine.
But the problem is:
If for example I have three ID (111, 222, 333), in master page if I select 222 and go to detail page it shows the appropriate records for 222 as I selected 222 in master page. If I keep the detail page open for more than the timeout minutes specified in web.xml and then try to access the detail page again it ask for userid and password (which is fine). If I put userid and password, then it shows the detail page with the first record which is the record associated with the ID 111. But before timeout I was working with the ID 222, so it should show the record associated with ID 222 as I was working with ID 222 before timeout.
Can anybody help me to solve this problem?
Thanks
Syed Jabbar
University of Windsor
Windsor, ON, Canada

I would put my money on the fact that since your application is timing out, it is dropping any state that your View Objects otherwise had before the application timeout.
So upon reauthorizing and reaccessing the application (and going directly to the detail page) the View Object is reinstantiated and only knows to go to its default data set which is 111.
If my assumption is correct, I don't think you could really implement this without a lot of trouble.

Timeout problem during EP6 NW04 installation.

We have the originals DVDs from SAP.
During the installation of the EP6 in the "Start SAP J2EE Engine" phase. We get a message box reffering a timeout (1800sec)
we check both Instances (central and j2ee) and there r running (green light)
What can be the problem and how can be fix it ?
Thx
Here is the log "sapinst_log"
INFO 2006-06-22 15:47:20
Copying file C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2006-06-22 15:47:20
Copying file C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2006-06-22 15:47:20
Copying file C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/keydb.xml to: C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/keydb.9.xml.
INFO 2006-06-22 15:47:20
Copying file C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/keydb.xml to: C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/keydb.9.xml.
INFO 2006-06-22 15:47:20
Creating file C:\Program Files\sapinst_instdir\NW04SR1\EP\EP\keydb.9.xml.
INFO 2006-06-22 15:47:21
Installation start: Thursday, 22 June 2006, 15:47:19; installation directory: C:\Program Files\sapinst_instdir\NW04SR1\EP\EP; product to be installed: SAP NetWeaver '04 Support Release 1> NetWeaver Components Running on Java> Portal> Portal Installation
INFO 2006-06-22 15:47:21
Copying file C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/summary.8.html.
INFO 2006-06-22 15:47:21
Copying file C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/summary.8.html.
INFO 2006-06-22 15:47:21
Creating file C:\Program Files\sapinst_instdir\NW04SR1\EP\EP\summary.8.html.
PHASE 2006-06-22 15:47:21
Deploying SDAs (using SDM and SAP J2EE Engine).
PHASE 2006-06-22 15:47:21
Deploying SDAs (using SDM and SAP J2EE Engine).
PHASE 2006-06-22 15:47:21
Deploying SDAs (using SDM and SAP J2EE Engine).
PHASE 2006-06-22 15:47:21
Deploying SDAs (using SDM and SAP J2EE Engine).
PHASE 2006-06-22 15:47:21
Deploying SDAs (using SDM and SAP J2EE Engine).
PHASE 2006-06-22 15:47:21
Deploying SDAs (using SDM and SAP J2EE Engine).
PHASE 2006-06-22 15:47:21
Deploying SDAs (using SDM and SAP J2EE Engine).
PHASE 2006-06-22 15:47:21
Deploying SDAs (using SDM and SAP J2EE Engine).
PHASE 2006-06-22 15:47:21
Deploying SDAs (using SDM and SAP J2EE Engine).
PHASE 2006-06-22 15:47:22
Deployment of Basis functionality for Integration Server
PHASE 2006-06-22 15:47:22
Deployment of Basis functionality for Integration Server
And just in case u need this the "sapinst_dev.log"
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:344]
           CControlFile::getMessageFilePath()
Running with messages from C:/Program Files/sapinst_instdir/NW04SR1/EP/EP
TRACE      [sapinst.cpp:306]
           CSapInst::initMessaging()
This is SAPinst, version 642, build 794439
compiled on Nov 25 2005, 00:02:40
TRACE      [sapinst.cpp:311]
           CSapInst::initMessaging()
Gui connected by user qt from host sapnw
TRACE      [syxxsyshlp.cpp:175]
           syslib::logSystemState()
Process environment
===================
Environment Variables
=====================
   = C:=C:\Program Files\sapinst_instdir\NW04SR1\EP\EP
   = F:=F:\Dvds\51031679\IM01_NT_I386\SAPINST\NT\I386
ALLUSERSPROFILE = C:\Documents and Settings\All Users
APPDATA = C:\Documents and Settings\qt.SAPNW\Application Data
CLIENTNAME = QT30100
ClusterLog = C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles = C:\Program Files\Common Files
COMPUTERNAME = SAPNW
ComSpec = C:\WINDOWS\system32\cmd.exe
FP_NO_HOST_CHECK = NO
HOMEDRIVE = C:
HOMEPATH = \Documents and Settings\qt.SAPNW
JAVA_HOME = C:\j2sdk1.4.2_12
LOGONSERVER =
SAPNW
NUMBER_OF_PROCESSORS = 4
OS = Windows_NT
Path = C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;D:\usr\sap\NWP\SYS\exe\run\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\j2sdk1.4.2_12\BIN
PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE = x86
PROCESSOR_IDENTIFIER = x86 Family 15 Model 4 Stepping 3, GenuineIntel
PROCESSOR_LEVEL = 15
PROCESSOR_REVISION = 0403
ProgramFiles = C:\Program Files
SAPINST_EXEDIR_CD = F:/Dvds/51031679/IM01_NT_I386/SAPINST/NT/I386
SESSIONNAME = RDP-Tcp#5
SystemDrive = C:
SystemRoot = C:\WINDOWS
TEMP = C:\DOCUME1\QT2C8C1.SAP\LOCALS~1\Temp\3
TMP = C:\DOCUME1\QT2C8C1.SAP\LOCALS~1\Temp\3
USERDOMAIN = SAPNW
USERNAME = qt
USERPROFILE = C:\Documents and Settings\qt.SAPNW
windir = C:\WINDOWS
User: SAPNW\qt, Id: S-1-5-21-2772977883-3678856500-3150200115-1018
Working directory: C:\Program Files\sapinst_instdir\NW04SR1\EP\EP
Current access token
====================
Could not get thread token. Last error: 1008. I assume that no thread token exists.
Got process token.
Privileges:
Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
Privilege SeMachineAccountPrivilege, display name: Add workstations to domain, not enabled.
Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
Privilege SeUndockPrivilege, display name: Remove computer from docking station, not enabled.
Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, not enabled.
Privilege SeManageVolumePrivilege, display name: Perform volume maintenance tasks, not enabled.
Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
Privilege SeCreatePagefilePrivilege, display name: Create a pagefile, not enabled.
Groups:
Group count: 11
\LOCAL S-1-2-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Administrators S-1-5-32-544 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_OWNER
\Everyone S-1-1-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Users S-1-5-32-545 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
SAPNW\None S-1-5-21-2772977883-3678856500-3150200115-513 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\INTERACTIVE S-1-5-4 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
\ S-1-5-5-0-21602859 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_LOGON_ID
NT AUTHORITY\NTLM Authentication S-1-5-64-10 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\Authenticated Users S-1-5-11 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\REMOTE INTERACTIVE LOGON S-1-5-14 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\This Organization S-1-5-15 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
TRACE      [syxxsyshlp.cpp:185]
           syslib::logSystemState()
System information
==================
OS version, host name: Microsoft Windows NT [Version 5.2.3790 Service Pack 1] SAPNW
RAM size (MB): 2047.27
Swap size (MB): 3943.97
TRACE
Running with control file F:/Dvds/51031679/IM01_NT_I386/SAPINST/NT/I386/NW04SR1/EP/control.xml version 642 and changelist 794439
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:142]
           CControlFile::getKeydbControlFileName()
Running with keydb file keydb.xml
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:235]
           CControlFile::getDialogControlFileName()
Running with dialog control file dialog.xml
TRACE      [iaxxccontrolfile.cpp:184]
           CControlFile::getResourecFileName()
Running with resource file C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/helppool.xml
INFO       2006-06-22 15:47:20 [syxxcfile.cpp:325]
           CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
INFO       2006-06-22 15:47:20 [syxxcfile.cpp:446]
           CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/keydb.xml to: q0w9e9r8t7.1.xml.
INFO       2006-06-22 15:47:20 [syxxcfile.cpp:325]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/keydb.9.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/keydb.xml to: C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/keydb.9.xml.
INFO       2006-06-22 15:47:20 [syxxcfile.cpp:446]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/keydb.9.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/keydb.xml to: C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/keydb.9.xml.
INFO       2006-06-22 15:47:20 [synxcpath.cpp:834]
           CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04SR1\EP\EP\keydb.9.xml.
TRACE      [iaxxclib.cpp:165]
           load()
Opened iaccdlib.dll
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
INFO       2006-06-22 15:47:21 [iaxxcwalker.cpp:59]
           CDomWalker::walk()
Installation start: Thursday, 22 June 2006, 15:47:19; installation directory: C:\Program Files\sapinst_instdir\NW04SR1\EP\EP; product to be installed: SAP NetWeaver '04 Support Release 1> NetWeaver Components Running on Java> Portal> Portal Installation
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE      [iaxxcdgprc.cpp:610]
           CDialogProcessor::printTraceOnChangedInstanceNum()
Deactivated some dialog sequences for component startStopGenericWithoutDialogs|ind|ind|ind|ind|ind; available: 1; required: 0
TRACE      [iaxxcdgprc.cpp:610]
           CDialogProcessor::printTraceOnChangedInstanceNum()
Deactivated some dialog sequences for component startStopGenericWithoutDialogs2|ind|ind|ind|ind|ind; available: 1; required: 0
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE      [iaxxcdgprc.cpp:610]
           CDialogProcessor::printTraceOnChangedInstanceNum()
Deactivated some dialog sequences for component EP_INSTALL_CM|ind|ind|ind|ind|ind; available: 1; required: 0
TRACE      [iaxxcdgprc.cpp:610]
           CDialogProcessor::printTraceOnChangedInstanceNum()
Deactivated some dialog sequences for component startStopGenericWithoutDialogs|ind|ind|ind|ind|ind; available: 1; required: 0
TRACE      [iaxxcdgprc.cpp:610]
           CDialogProcessor::printTraceOnChangedInstanceNum()
Deactivated some dialog sequences for component DEPLOY_CM_PAR_FILES|ind|ind|ind|ind|ind; available: 1; required: 0
TRACE      [iaxxcdgprc.cpp:610]
           CDialogProcessor::printTraceOnChangedInstanceNum()
Deactivated some dialog sequences for component EP_INSTALL_***|ind|ind|ind|EP60|ind; available: 1; required: 0
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
INFO       2006-06-22 15:47:21 [syxxcfile.cpp:325]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/summary.8.html, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/summary.8.html.
INFO       2006-06-22 15:47:21 [syxxcfile.cpp:446]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/summary.8.html, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/summary.html to: C:/Program Files/sapinst_instdir/NW04SR1/EP/EP/summary.8.html.
INFO       2006-06-22 15:47:21 [synxcpath.cpp:834]
           CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04SR1\EP\EP\summary.8.html.
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
PHASE      2006-06-22 15:47:21 [iaxxcwalker.cpp:416]
           CDomWalker::printPhaseInfo()
Deploying SDAs (using SDM and SAP J2EE Engine).
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
PHASE      2006-06-22 15:47:21 [iaxxcwalker.cpp:416]
           CDomWalker::printPhaseInfo()
Deploying SDAs (using SDM and SAP J2EE Engine).
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path
PHASE      2006-06-22 15:47:21 [iaxxcwalker.cpp:416]
           CDomWalker::printPhaseInfo()
Deploying SDAs (using SDM and SAP J2EE Engine).
TRACE[E]   [syxxcfsmgt.cpp:269]
           CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE      [iaxxccontrolfile.cpp:77]
           CControlFile::getControlFilePath()
Running with control file path

Hi all,
this issue is normal.
I always got this error when installing/patching the J2EE and components.
If J2EE is yellow, wait for it to be green and choose resume.
If it is green, resume. If it does not work, restart the J2EE as stated.
Note 739190 is supposed to be a solution, but it changed anything for me.
Brad

ODBC Timeout problem.

I am trying to use the query timeout of the ODBC specification while accessing an Oracle 8i database from within a client code written in MS Visual C++ 6.0.
I use Oracle's ODBC driver version 8.01.07.810.
(Microsoft's ODBC driver for Oracle does not implement
the ODBC Timeout feature).
During my tests I use a special stored procedure which
forces my call to wait for a specified number of seconds far much than the amount I specifed in my client code
(via setting the SQL_ATTR_QUERY_TIMEOUT attribute with
SQLSetStmtAttr).
I use synchronous query execution, and ideally my code should block until either a response arrives from the database or timeout ocurs. Unfortunately, my blocked query execution never timeouts and waits until the database responds. "Enable Query Timeout" box is checked witin the ODBC Driver configuration window for the system DSN I use to access the database.
When I try the same test setting with an MS_SQL Sever instead of an Oracle connection (via the Microsoft's driver manager for SQL Server as expected), everyting works fine and the timeout occurs.
Is there anyone who has an idea on why this could happen?
Many thanks in advance.
A.F.Ates

Jules,
Thanks for the pointer. So what does my 'connection string'
look like with your suggestion in the above example? Would the code
Dim MM_connPathData_STRING
MM_connPathData_STRING = "PROVIDER=SQLOLEDB;DATA
SOURCE=PATHOLOGY1;UID=user;PWD=pass;DATABASE=pathnet_data"
be significantly quicker?
I *have* looked at the database but my problem is there is
nothing I can do with the underlying structure - I'm just working
with what I'm given )-; What I need is a way of connecting to the
data regardless of the response time. What I am giving the users is
a view on *their* data - essentially, if it's slow then that is
their problem!!
Again, thanks for all and any input,
Simon

DAQmx VIs Timeout Problems

Hello,
I am trying to acquire 9 frequency input chanels thorugh PXI-6624 card.
I have 9 independent loops for 9 frequency counter chanels. I am able to read all the frequencies above 10Hz properly.
Now the problem is,
Sometimes there will be no pulses, and the Counter Input DAQmx VI will wait for timeout.( I have given the timeout of 1 sec). During this time my CPU consumption goes very high and I am not able to read any of the analog inputs too.
and say if similar condition happens to all the 9 frequency input channels then my software hangs.
I have tried using wait mode method but i wasnt able to read any frequency with it.
I have also read it that, when "Counter Input DAQmx VI is in timeout mode at that time we cannot make any other DAQmx VIs call". Please refer this link http://zone.ni.com/devzone/cda/tut/p/id/3166
Thanks,
Krunal

What version of LabVIEW? Did you install DAQmx AFTER installing LabVIEW?
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Timeout problem in webdynpro

Hi all,
I have one problem when i execute my reports through portal in my developement server it takes 15-30 minutes to display the list in the portal but the same report executing through site it is giving page cannot be displayed after 2min30 secs.is there any solution for this. [ The process is like this when we click report button in portal it passes the report name to RFC and RFC internally executes the report and send the results to portal and here we format it and display it.It is developed in webdynpro and sapr/3 report is taking 5 min. to execute report in r/3 itself ]

Hello Nageswara,
You have to change the Page Timeout Property.
Go to Portal Content -> Portal User -> Open the Default Framework Page. Then select the Desktop Innerpage and open it. There is a property called " Page Timeout". Increase the value as suitable to you.
Regards
Deb
[Reward Points for helpful answers]

Web authentication timeout problem

We have one SSID using web-auth with ISE.
On WLC we configured idle timeout fot 2400 seconds and on wlan>advanced with 65535 seconds for session timeout. But we are having continuos deauthentication in about 10 minutes.
When we check WLC, our mac-address is deleted after about each 10 minutes
How Can I solved this issue?

On this wlan we are using Web-Auth with WPA2 + PSK.
Software version 7.0.220
another ssid not have this problem.
debug client
*dot1xMsgTask: Sep 20 12:33:29.788: 00:1c:26:ac:d9:e5 Key exchange done, data packets from mobile 00:1c:26:ac:d9:e5 should be forwarded shortly
*dot1xMsgTask: Sep 20 12:33:29.788: 00:1c:26:ac:d9:e5 Sending EAPOL-Key Message to mobile 00:1c:26:ac:d9:e5
state PTKINITDONE (message 5 - group), replay counter 00.00.00.00.00.00.00.02
*dot1xMsgTask: Sep 20 12:33:29.788: 00:1c:26:ac:d9:e5 Updated broadcast key sent to mobile 00:1C:26:AC:D9:E5
*osapiBsnTimer: Sep 20 12:33:30.986: 00:1c:26:ac:d9:e5 802.1x 'timeoutEvt' Timer expired for station 00:1c:26:ac:d9:e5 and for message = M5
*dot1xMsgTask: Sep 20 12:33:30.986: 00:1c:26:ac:d9:e5 Retransmit 1 of EAPOL-Key M5 (length 139) for mobile 00:1c:26:ac:d9:e5
*osapiBsnTimer: Sep 20 12:33:31.986: 00:1c:26:ac:d9:e5 802.1x 'timeoutEvt' Timer expired for station 00:1c:26:ac:d9:e5 and for message = M5
*dot1xMsgTask: Sep 20 12:33:31.986: 00:1c:26:ac:d9:e5 Retransmit 2 of EAPOL-Key M5 (length 139) for mobile 00:1c:26:ac:d9:e5
*osapiBsnTimer: Sep 20 12:33:32.986: 00:1c:26:ac:d9:e5 802.1x 'timeoutEvt' Timer expired for station 00:1c:26:ac:d9:e5 and for message = M5
*dot1xMsgTask: Sep 20 12:33:32.986: 00:1c:26:ac:d9:e5 Retransmit failure for EAPOL-Key M5 to mobile 00:1c:26:ac:d9:e5, retransmit count 3, mscb deauth count 0
*dot1xMsgTask: Sep 20 12:33:32.986: 00:1c:26:ac:d9:e5 Sent Deauthenticate to mobile on BSSID 40:f4:ec:4a:b0:f0 slot 0(caller 1x_ptsm.c:534)
*dot1xMsgTask: Sep 20 12:33:32.986: 00:1c:26:ac:d9:e5 Scheduling deletion of Mobile Station: (callerId: 57) in 10 seconds
*osapiBsnTimer: Sep 20 12:33:42.986: 00:1c:26:ac:d9:e5 apfMsExpireCallback (apf_ms.c:608) Expiring Mobile!
*apfReceiveTask: Sep 20 12:33:42.986: 00:1c:26:ac:d9:e5 apfMsExpireMobileStation (apf_ms.c:5009) Changing state for mobile 00:1c:26:ac:d9:e5 on AP 40:f4:ec:4a:b0:f0 from Associated to Disassociated
*apfReceiveTask: Sep 20 12:33:42.986: 00:1c:26:ac:d9:e5 Scheduling deletion of Mobile Station: (callerId: 45) in 10 seconds
*osapiBsnTimer: Sep 20 12:33:52.986: 00:1c:26:ac:d9:e5 apfMsExpireCallback (apf_ms.c:608) Expiring Mobile!
*apfReceiveTask: Sep 20 12:33:52.986: 00:1c:26:ac:d9:e5 Sent Deauthenticate to mobile on BSSID 40:f4:ec:4a:b0:f0 slot 0(caller apf_ms.c:5101)
*apfReceiveTask: Sep 20 12:33:52.986: 00:1c:26:ac:d9:e5 apfMsAssoStateDec
*apfReceiveTask: Sep 20 12:33:52.986: 00:1c:26:ac:d9:e5 apfMsExpireMobileStation (apf_ms.c:5139) Changing state for mobile 00:1c:26:ac:d9:e5 on AP 40:f4:ec:4a:b0:f0 from Disassociated to Idle
*apfReceiveTask: Sep 20 12:33:52.986: 00:1c:26:ac:d9:e5 Scheduling deletion of Mobile Station: (callerId: 47) in 10 seconds
*osapiBsnTimer: Sep 20 12:34:02.986: 00:1c:26:ac:d9:e5 apfMsExpireCallback (apf_ms.c:608) Expiring Mobile!
*apfReceiveTask: Sep 20 12:34:02.986: 00:1c:26:ac:d9:e5 10.166.66.248 RUN (20) Deleted mobile LWAPP rule on AP [40:f4:ec:4a:b0:f0]
Do you have any suggestion about log or debug ?
thanks a lot,
Murilo

Cisco RV320 - Timeout problem

Hi all,
I have purchased the product in the subject as I needed 2 WAN for the load balancing of 2 ADSL (at the moment only one active), before I used a NETGEAR with DD-WRT firmware.
Having gone through the wizard router set-up, I noticed random timeout issues popping up where even the router adminweb doesn't load (set on 192.168.2.1 without the various VPN as they wouldn't have allowed the set up of such IP.) With the NetGear I have never experienced such problems..
Do you have an idea of what it might be? Because it's practically useless in its current state.
This is a ping:
MacBook-Air-di-Luca:~ lucavasini$ ping www.google.com
PING www.google.com (149.3.176.22): 56 data bytes
64 bytes from 149.3.176.22: icmp_seq=0 ttl=56 time=44.115 ms
64 bytes from 149.3.176.22: icmp_seq=1 ttl=56 time=74.773 ms
64 bytes from 149.3.176.22: icmp_seq=2 ttl=56 time=58.397 ms
64 bytes from 149.3.176.22: icmp_seq=3 ttl=56 time=103.889 ms
64 bytes from 149.3.176.22: icmp_seq=4 ttl=56 time=216.906 ms
64 bytes from 149.3.176.22: icmp_seq=5 ttl=56 time=56.474 ms
64 bytes from 149.3.176.22: icmp_seq=6 ttl=56 time=207.755 ms
64 bytes from 149.3.176.22: icmp_seq=7 ttl=56 time=64.326 ms
64 bytes from 149.3.176.22: icmp_seq=8 ttl=56 time=52.341 ms
64 bytes from 149.3.176.22: icmp_seq=9 ttl=56 time=175.903 ms
64 bytes from 149.3.176.22: icmp_seq=10 ttl=56 time=227.868 ms
64 bytes from 149.3.176.22: icmp_seq=11 ttl=56 time=136.094 ms
64 bytes from 149.3.176.22: icmp_seq=12 ttl=56 time=75.252 ms
64 bytes from 149.3.176.22: icmp_seq=13 ttl=56 time=182.221 ms
64 bytes from 149.3.176.22: icmp_seq=14 ttl=56 time=448.326 ms
Request timeout for icmp_seq 15
64 bytes from 149.3.176.22: icmp_seq=16 ttl=56 time=48.658 ms
64 bytes from 149.3.176.22: icmp_seq=17 ttl=56 time=38.991 ms
^C
--- www.google.com ping statistics ---
18 packets transmitted, 17 packets received, 5.6% packet loss
round-trip min/avg/max/stddev = 38.991/130.135/448.326/102.688 ms
This is a traceroute to my website,
traceroute problem on 3 point?
MacBook-Air-di-Luca:~ lucavasini$ traceroute www.lucavasini.it
traceroute to www.lucavasini.it (188.226.190.148), 64 hops max, 52 byte packets
1 192.168.1.1 (192.168.1.1) 1.925 ms 1.519 ms 1.399 ms
2 192.168.2.1 (192.168.2.1) 3.282 ms 2.212 ms 2.051 ms
3 * * *
4 host153-230-static.44-88-b.business.telecomitalia.it (88.44.230.153) 26.062 ms 28.702 ms 24.144 ms
5 80.17.209.141 (80.17.209.141) 25.597 ms 26.954 ms 24.408 ms
6 172.19.242.58 (172.19.242.58) 37.581 ms 39.646 ms 41.300 ms
7 pos2-8-0-0.milano50.mil.seabone.net (93.186.128.126) 39.033 ms 37.901 ms 42.055 ms
8 xe-2-3-0.milano51.mil.seabone.net (195.22.192.103) 35.717 ms 36.261 ms *
9 ntt-verio.milano51.mil.seabone.net (93.186.128.157) 77.357 ms 58.782 ms *
10 ae-20.r03.amstnl02.nl.bb.gin.ntt.net (129.250.4.169) 67.833 ms 68.055 ms 68.245 ms
11 83.231.213.2 (83.231.213.2) 62.632 ms 62.776 ms 63.491 ms
12 95.85.0.238 (95.85.0.238) 69.742 ms 62.714 ms 62.955 ms
13 srv1.lucavasini.it (188.226.190.148) 74.270 ms 73.730 ms 73.891 ms
MacBook-Air-di-Luca:~ lucavasini$
ping to my website
MacBook-Air-di-Luca:~ lucavasini$ ping www.lucavasini.it
PING www.lucavasini.it (188.226.190.148): 56 data bytes
64 bytes from 188.226.190.148: icmp_seq=0 ttl=51 time=79.104 ms
64 bytes from 188.226.190.148: icmp_seq=1 ttl=51 time=86.076 ms
64 bytes from 188.226.190.148: icmp_seq=2 ttl=51 time=153.377 ms
64 bytes from 188.226.190.148: icmp_seq=3 ttl=51 time=87.232 ms
64 bytes from 188.226.190.148: icmp_seq=4 ttl=51 time=76.080 ms
64 bytes from 188.226.190.148: icmp_seq=5 ttl=51 time=67.852 ms
64 bytes from 188.226.190.148: icmp_seq=6 ttl=51 time=73.136 ms
Request timeout for icmp_seq 7
64 bytes from 188.226.190.148: icmp_seq=7 ttl=51 time=1006.756 ms
64 bytes from 188.226.190.148: icmp_seq=8 ttl=51 time=69.359 ms
64 bytes from 188.226.190.148: icmp_seq=9 ttl=51 time=86.434 ms
64 bytes from 188.226.190.148: icmp_seq=10 ttl=51 time=90.863 ms
64 bytes from 188.226.190.148: icmp_seq=11 ttl=51 time=97.732 ms
64 bytes from 188.226.190.148: icmp_seq=12 ttl=51 time=82.909 ms
64 bytes from 188.226.190.148: icmp_seq=13 ttl=51 time=101.086 ms
Request timeout for icmp_seq 15
64 bytes from 188.226.190.148: icmp_seq=16 ttl=51 time=78.514 ms
64 bytes from 188.226.190.148: icmp_seq=17 ttl=51 time=67.852 ms
64 bytes from 188.226.190.148: icmp_seq=18 ttl=51 time=88.371 ms
64 bytes from 188.226.190.148: icmp_seq=19 ttl=51 time=103.850 ms
64 bytes from 188.226.190.148: icmp_seq=20 ttl=51 time=97.550 ms
64 bytes from 188.226.190.148: icmp_seq=21 ttl=51 time=66.642 ms
^C
--- www.lucavasini.it ping statistics ---
22 packets transmitted, 20 packets received, 9.1% packet loss
round-trip min/avg/max/stddev = 66.642/133.039/1006.756/201.322 ms
[EDIT] now line don't working
MacBook-Air-di-Luca:~ lucavasini$ ping www.google.com
PING www.google.com (149.3.177.54): 56 data bytes
64 bytes from 149.3.177.54: icmp_seq=0 ttl=56 time=36.093 ms
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
Request timeout for icmp_seq 4
Request timeout for icmp_seq 5
Request timeout for icmp_seq 6
Request timeout for icmp_seq 7
Request timeout for icmp_seq 8
Request timeout for icmp_seq 9
Request timeout for icmp_seq 10
Request timeout for icmp_seq 11
^XRequest timeout for icmp_seq 12
^C
--- www.google.com ping statistics ---
14 packets transmitted, 1 packets received, 92.9% packet loss
round-trip min/avg/max/stddev = 36.093/36.093/36.093/0.000 ms
LOG ROUTER:
2023-09-13, 19:21:32
Kernel
kernel: i2c i2c-0: Failed to register i2c client rs5c372b at 0x32 (-16)
2023-09-13, 19:21:32
Kernel
kernel: i2c i2c-0: Can't create device at 0x32
2023-09-13, 19:21:32
Kernel
kernel: gre: can't add protocol
2014-06-05, 01:57:56
Kernel
kernel: i2c i2c-0: Failed to register i2c client rs5c372b at 0x32 (-16)
2014-06-05, 01:57:56
Kernel
kernel: i2c i2c-0: Can't create device at 0x32
2014-06-05, 01:57:56
Kernel
kernel: gre: can't add protocol
2014-06-05, 13:26:09
Kernel
kernel: i2c i2c-0: Failed to register i2c client rs5c372b at 0x32 (-16)
2014-06-05, 13:26:09
Kernel
kernel: i2c i2c-0: Can't create device at 0x32
2014-06-05, 13:26:09
Kernel
kernel: gre: can't add protocol
2014-06-05, 15:36:26
Kernel
kernel: i2c i2c-0: Failed to register i2c client rs5c372b at 0x32 (-16)
2014-06-05, 15:36:26
Kernel
kernel: i2c i2c-0: Can't create device at 0x32
2014-06-05, 15:36:26
Kernel
kernel: gre: can't add protocol
2014-06-08, 09:54:15
Kernel
kernel: i2c i2c-0: Failed to register i2c client rs5c372b at 0x32 (-16)
2014-06-08, 09:54:15
Kernel
kernel: i2c i2c-0: Can't create device at 0x32
2014-06-08, 09:54:15
Kernel
kernel: gre: can't add protocol
2014-06-07, 23:56:35
Kernel
kernel: i2c i2c-0: Failed to register i2c client rs5c372b at 0x32 (-16)
2014-06-07, 23:56:35
Kernel
kernel: i2c i2c-0: Can't create device at 0x32
2014-06-07, 23:56:35
Kernel
kernel: gre: can't add protocol
2014-06-08, 00:18:01
Kernel
kernel: i2c i2c-0: Failed to register i2c client rs5c372b at 0x32 (-16)
2014-06-08, 00:18:01
Kernel
kernel: i2c i2c-0: Can't create device at 0x32
2014-06-08, 00:18:01
Kernel
kernel: gre: can't add protocol
I have attached a few screenshots.
Thank you.
Luca

Luca,
Please call in to the Small Business Support Center so we can look at your set up. We will be happy to make recommendations and provide a resolution. Please have your serial number handy and call us at 866-606-1866 during your normal business hours.

CF Performance / Timeout Problems

Hi,
we are developing and hosting a site for a client with around ~3 million pages and around 600k visitors per month. We recently switched to a new server and in the process upgraded to CF10 from CF8. Many things like images, downloads and video streaming is done via external CDNs. The problem we are having right now is that the server/site produces timeouts and gets from time to time slower to a point where it's basically just dead. After a reboot of the virtual machine everything is snappy and great again. Now this may take a day or a week - there is no logic to it. Also while the site is perfectly snappy cfstat also shows the occasional timeout which we can't explain. The funny thing is that the server itself isn't the problem - on the hardware site it only uses ~10% cpu power and yet coldfusion runs slow.
Just some quick facts:
2 x Intel® Xeon® X5650 Hexa Core (6 x 2,66 GHz, 12 MB L3 Cache)
RAM: 16 GB
4 x 300 GB SAS 15krpm 3,5
CF is running in a virtual machine virtualized via VMware ESXi. It also runs mysql on the same virtual machine.
But now to get to a more specific question. We created a new virtual machine and are running some load tests on it to tweak it and find the problem. It seems that after the update 5 it got a bit better. But still we get unusual timeouts / slow downs every ~2 minutes. So we dumbed down our load tests to one single cfm file that has one query in it and a standard / empty application.cfc. We also duplicated the code to php and are executing the exact same query from php. The php load tests shows no timeouts / errors whatsoever. The coldfusion loadtest shows timeouts every ~2 minutes or so (not exactly, but damn close to 2 minutes). We have no idea what's causing this. The server is pretty much a vanilla installation (we tried centos and ubuntu). Also there are no memory problems we can see in the cf server monitor. The 2 minute errors are not caused by the garbage collection. I attached two pictures - first the coldfusion loadtest and second the php loadtest.
Does anybody have any ideas what might cause this? We are really running out of ideas here.

Could be Garbage Collection in you jvm? Also make sure you have the latest updaters for CF10.
I'd suggest downloading the 10 day free trial of http://www.fusion-reactor.com/fr/ and see what it says. It will show memory issues, database issues, and slow pages. I use it everyday to monitor our sites.
p.s. I do not work for them or benefit from the sale of that product...
Cheers!
-Dave

BpmPatternCollectTime Timeout problem

Similar Messages

Maybe you are looking for