Brand New - Jnr ABAP Developer

Hi All,
I am a new ABAP Developer with very little knowledge of the ABAP Industry. I am in desperate need of your assistance.
I am currently busy with the activation of Unicoded Programs and find myself stuck with the following error for the code presented shortly afterwards.
Error: "OUT_TAB-Value" and "Payrt" are not mutually convertible in a unicode program...
Code:
IF sy-subrc EQ 0.
    out_tab-name = 'PAYR'.
    out_tab-value = payrt.
    APPEND out_tab.
ENDIF.
Is it possible for you guys to assist? If more information is needed please mail me...
Thanks:)
Preneshen Govender

hi govender,
check this in google,
http://help.sap.com/saphelp_nw04/helpdata/en/79/c5546ab3dc11d5993800508b6b8b11/content.htm
these are the restrictions for Unicoded Programs .
with regards,
asif

Similar Messages

I bought a brand new Mac 27" desktop that came loaded with Adobe CS6. Everything worked like a charm until the hard drive, 1Tb, developed a bad sector and the Apple Store reinstalled a new one as I had extended warranty with them. The recycled the drive i

I bought a brand new Mac 27" desktop that came loaded with Adobe CS6. Everything worked like a charm until the hard drive, 1Tb, developed a bad sector and the Apple Store reinstalled a new one as I had extended warranty with them. They recycled the drive immediately (like a fool I didn't ask for it back to get the data off it.) But luckily I have all my data on CrashPlan. I downloaded it and it worked great except I downloaded it to the desktop and not the original location so it got squirrely. I also have an external 1.5Tb drive that I wanted to make bootable so I installed Mavericks 10.9.3 . I then went ahead and installed it on the newly installed drive too.
I think that because I have a new drive Adobe thinks I have a news computer. I bought the 27" Mac brand new from Ebay and it came loaded with software, including CS6. I have a serial number for CS6 but Adobe said it wasn't valid. (I have owned CS2, CS4 and now CS6 which came preloaded onto the Mac by the seller who told me that the software was registered to the Mac???
I am going to re-download the backup but this time to the original location (I still don't think it will work with Adobe. What can I do about this?
iMac 27-inch, Late 2012
Processor 3.2 GHz Intel Core i5
Memory 32 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GTX 675MX 1024 MB
Software OS X 10.9.3 (13D65)@

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

NEW ABAP Development Area

Hi SDN,
I found the NEW ABAP Development Area very great. Still downloading/checking the new materials.
I hope it will be updated regularly.
Regards,
Peter

Hi Serdar,
I agree.
Fortunately it seems it was updated recently.
Peter

New ABAP Developer

Hi at all ...
I'm a new ABAP Developer and now I'm faced a lot of new stuff. Can you give me hints for searching in ABAP Dict. or something like that.
Or just hints in developing ABAP ???
Best Regards stifflor

Hello
First of all read this: https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement
Then read Please read "The Forum Rules of Engagement" before posting! HOT NEWS!!

Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input

Dear Friends,
We are facing a serious problem for debugging. Expecting valuable input for the same.
Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input in Production Server.
The debugging (for WebDynpro-ABAP application) is working in Dev. Server for
1st ] Within R/3
Ex. debug for bapi within R/3. i.e. value enter as input in R/3 only.
2nd ] From webpage to R/3
Ex. Some input given on the internet web page developed through WebDynpro and external breakpoint set in R/3 it works. It directs to R/3 code through debugging.
In Prod. Server the 1st case above is working but the 2nd case is not working.
In Prod. Server the WebDynpro developed applications are running successfully through internet explorer webpage inputs. So running the application is not a problem in prod. Server but debugging of the same is the problem.
The setting which are done in Prod. server are,
1] RZ10 in parameters are set for port and host name.
2.1] In SMICM check for ICM.
2.2] Host file updated in Windows-System 32.
3] In SICF following services are active,
3.1] default_host/sap/bc/webdynpro
3.2] default_host/sap/public/bc
3.3] default_host/sap/public/bc/webdynpro/viewdesigner
3.4] default_host/sap/bc/wdvd
3.5] default_host/sap/public/icman
3.6] default_host/sap/bc/gui/sap/its/webgui
3.7] default_host/sap/public/ping
3.8] default_host/sap/bc/error
3.9] default_host/sap/bc/echo
4] In SE80
4.1] Internet services-System-are published
4.2] Internet services-WEBGUI-are published
4.3] Utilities-Setting-ABAP Editor-Debugging-Username & New Debugger set.
4.4] Utilities-Setting-ABAP Editor-Editor-Front-End Editor(New) set.
5] In Su01 for user profiles sap_all & sap_new is assigned and role SAP_BC_WEBSERVICE_DEBUGGER is assigned.
6] The support packages are also updated to latest level.
7] Gone through following links but not getting any clues.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/74d50bd1431b5ae10000000a42189c/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
Thanks in Advance.
Best Regards,
Abhijit.

No cross posting
Read the "Rules of Engagament"
Regards
Juan

Write permissions issues / lots of "ACL found but not expected" errors / hardware failure? on brand new Mac Mini (still within warranty). OSX Mavericks 10.9.1.

I was hoping that I could receive some feedback from you fine folks here
My situation:
I bought a 2012 Mac Mini 2.6 Ghz Intel Core i7 from the online Apple store. It came with Mavericks 10.9.1 pre-installed and was delivered two days ago (I know, the mini update is evident but I needed the machine).
I noticed that I had to enter my password every time I created, moved or deleted a folder. I did not think much of it.
I did, however, think much of not being able to install files from certain developers. I received the "The installer is damaged" notification as shown in this topic: https://discussions.apple.com/thread/5541793
This screenshot is someone elses, I tried to install audio software.
Based on that error, I contacted the developer of the software. But then I noticed that I got the same error for other developers too.
I tried the solution that the topic starter marked as solving his issue in https://discussions.apple.com/thread/5541793. It involves booting in OSX Recovery (command+R) and excecuting the 'resetpassword' command. That did not work for me. It also looks like my password data isn't stored as I do not see the 'obfuscated' password dots that the screenshot shows in that topic, even when I entered and saved it multiple times -- but I'm not sure if that is part of the main issue (which I'm gettting to).
I also made sure gatekeeper allows applications to be installed from unidentified developers, as shown here: http://www.instantteamspeak.com/static/en/img/mac-gatekeeper-anywhere.png That didn't help either.
Next I opened up Disk Utility and ran a check on write permissions. That got me worried.
The check ran for a long time, spitting out "ACL found but not expected" errors.
I proceeded to restore write permissions. That took 20-25 minutes.
Once it finished I checked write permissions again. An equal amount of permissions needed to be restored! It's as if Mavericks didn't remember anything it did.
The good news is that I could now install the files I previously couldn't, but the fact that I've restored write permissions three times now, and each time it seems as if nothing of that is remembered, has gotten me worried.
I've made a video with some explanation here http://youtu.be/a0hKQvy-Km8 - my sincerest apologies for the shaky camera.
I then checked the hard disk and the partition above it. The Macintosh HD gave me the green 'ok' light, but something weird happened when I checked the partition on the level above it. It will take ages to finish and I see Disk Utility doing some strange 'jumping around': http://youtu.be/hyLAEhLRnKc (warning - long video so you might want to skip through it. The point is to demonstrate how long it takes).
When I checked the hard disk for a second and third time, I got 'everything ok' results pretty quickly.
Checking both the HD and the partition above it again, this is what happens (and what now worries me the most): http://youtu.be/4l2Fb2RvOW4
Edit: I sum up my findings at the end of the video, might be better to skip here and then watch the full thing only if it's not clear yet.
There is some further explanation in the video. It basically comes down to Disk Utility not finishing/not providing any conslusion, while Activity Monitor shows it's not doing anything -- please bare with me when watching the video, I know it's not the most exhiting video ever posted on YouTube but it does bring my point across (there is some more talk in this one; not sure if that's an improvement in terms of entertainment value though ).
** Is my hard disk failing? In that case I'll return the Mac immediately.
** Or just a software issue?
As said, this Mac Mini is brand new. If at some stage anyone would feel the wise thing to do is to return my Mac, please do let me know. There is a 14 day return policy in The Netherlands (on top of other warranties) and I'd rather return it in case of doubt, than end up with technical issues with this machine once I've started working with it. I'm ok with doing some troubleshooting if the machine is fine, but I'd rather not take a gamble with a 1200 € machine under warranty.
Thank you so much in advance - your help is highly appreciated.
Paul

I was hoping that I could receive some feedback from you fine folks here
My situation:
I bought a 2012 Mac Mini 2.6 Ghz Intel Core i7 from the online Apple store. It came with Mavericks 10.9.1 pre-installed and was delivered two days ago (I know, the mini update is evident but I needed the machine).
I noticed that I had to enter my password every time I created, moved or deleted a folder. I did not think much of it.
I did, however, think much of not being able to install files from certain developers. I received the "The installer is damaged" notification as shown in this topic: https://discussions.apple.com/thread/5541793
This screenshot is someone elses, I tried to install audio software.
Based on that error, I contacted the developer of the software. But then I noticed that I got the same error for other developers too.
I tried the solution that the topic starter marked as solving his issue in https://discussions.apple.com/thread/5541793. It involves booting in OSX Recovery (command+R) and excecuting the 'resetpassword' command. That did not work for me. It also looks like my password data isn't stored as I do not see the 'obfuscated' password dots that the screenshot shows in that topic, even when I entered and saved it multiple times -- but I'm not sure if that is part of the main issue (which I'm gettting to).
I also made sure gatekeeper allows applications to be installed from unidentified developers, as shown here: http://www.instantteamspeak.com/static/en/img/mac-gatekeeper-anywhere.png That didn't help either.
Next I opened up Disk Utility and ran a check on write permissions. That got me worried.
The check ran for a long time, spitting out "ACL found but not expected" errors.
I proceeded to restore write permissions. That took 20-25 minutes.
Once it finished I checked write permissions again. An equal amount of permissions needed to be restored! It's as if Mavericks didn't remember anything it did.
The good news is that I could now install the files I previously couldn't, but the fact that I've restored write permissions three times now, and each time it seems as if nothing of that is remembered, has gotten me worried.
I've made a video with some explanation here http://youtu.be/a0hKQvy-Km8 - my sincerest apologies for the shaky camera.
I then checked the hard disk and the partition above it. The Macintosh HD gave me the green 'ok' light, but something weird happened when I checked the partition on the level above it. It will take ages to finish and I see Disk Utility doing some strange 'jumping around': http://youtu.be/hyLAEhLRnKc (warning - long video so you might want to skip through it. The point is to demonstrate how long it takes).
When I checked the hard disk for a second and third time, I got 'everything ok' results pretty quickly.
Checking both the HD and the partition above it again, this is what happens (and what now worries me the most): http://youtu.be/4l2Fb2RvOW4
Edit: I sum up my findings at the end of the video, might be better to skip here and then watch the full thing only if it's not clear yet.
There is some further explanation in the video. It basically comes down to Disk Utility not finishing/not providing any conslusion, while Activity Monitor shows it's not doing anything -- please bare with me when watching the video, I know it's not the most exhiting video ever posted on YouTube but it does bring my point across (there is some more talk in this one; not sure if that's an improvement in terms of entertainment value though ).
** Is my hard disk failing? In that case I'll return the Mac immediately.
** Or just a software issue?
As said, this Mac Mini is brand new. If at some stage anyone would feel the wise thing to do is to return my Mac, please do let me know. There is a 14 day return policy in The Netherlands (on top of other warranties) and I'd rather return it in case of doubt, than end up with technical issues with this machine once I've started working with it. I'm ok with doing some troubleshooting if the machine is fine, but I'd rather not take a gamble with a 1200 € machine under warranty.
Thank you so much in advance - your help is highly appreciated.
Paul

HT5945 java wont install on a brand new mac.

This is a brand new mac and there do not appear to be any previous versions of java installed. When I download Java 7 from oracle
as per the instructions here:
http://www.java.com/en/download/help/mac_install.xml
downloaded from here:
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-j avase7-521261.html#jdk-7u45-oth-JPR
No joy. it just stops working on the install step. (no errors, it just doesn't respond).
I've tried installing this which also doesn't work (exact same result - does not respond on the install step):
http://support.apple.com/kb/DL1572
on all the other support tickets regarding problems installing java, the above two resources were repeatedly referred to, but they do not work for a new mac with mavericks installed and no previous version of java.
Please help.

mdmfolsom,
the 7u45 version of Java is not the latest version. At this writing, 7u51 is the latest version. To download the 7u51 Java Runtime Environment (“JRE”), go here. To download the 7u51 Java Development Kit (“JDK”), go here.

Re: Screen full of finger prints on brand new laptop

Hi
I bought a brand new laptop from a well known store when I opened it the screen was full of finger prints so I exchanged it for the same model and that 1 was the same and looked like it had been wiped with a damp cloth and 1 else had this problem is it the stores fault or Toshibas fault.
Thanks

Thanks for reply.
I have had 3 of these laptops now as the first one developed a fault but it was sealed and the adaptor and plug were sealed in a plastic bag, the second 1 was sealed but the plug and adaptor wasnt in a bag, and was also in a different box than the first 1.
Now the 3rd one is in the same box as the first it was sealed but the plug and adaptor wasnt, at the moment I have a complaint with the store were I bought it because even though they were sealed.
I feel that the 2nd and 3rd had already had a system restore but have been told they were new so I dont know whos at fault the store or Toshiba.
I dont think I should have to clean a brand new screen it might sound like nothing to some people, but I bought new and expect new

Adobe After Effects CC 2014 don't work with brand new Dell m6800 with AMD FirePro m6100 video card

Hello!
I got brand new Dell Precision m6800 with AMD FirePro m6100 FireGL V. Premiere and Photoshop works more or less fine, but there is a problem with AFx - software kills videocard (screen goes black for several seconds and then appears this notification - IC454010.gif gif by stumped2 | Photobucket ). After that - AFx hangs on. All the drivers are up to date (tried different AMD drivers - same situation), Windows 7 Pro - up to date, AFx - up to date.
Got small chat with Dell support team and they said - everything must work fine.
So - where is the problem? I spent almost 2.5k euros for this Dell mobile workstation, but right now I`m stuck with this problem. PS - funny fact - my Dell M6800 is on Adobe's hardware performance white paper, but seems that this means nothing

AE uses the GPU for very little. See here: GPU (CUDA, OpenGL) features in After Effects
Unless you're doing a lot with the ray-traced renderer or third party plugins (like Element 3d), AE won't really use your GPU at all.
And the ray-traced renderer is built on NVIDIA technology so it can never use an AMD card to accelerate it. You'd need an NVIDIA card.
That's probably part of the reason that the AE team has stopped putting any development time towards the ray-traced renderer and are focusing on a more powerful (and less GPU specific) way to do 3d in AE: details of CINEMA 4D integration with After Effects That's right: C4D is included for free with After Effects!
Since you don't have an NVIDIA card, this will actually render faster than the ray-traced renderer too!

Can the flash storage hard drives in the brand new 15inch Macbook Pro Retina Display laptops (10.22.13) be upgraded/replaced in the future?

Can the flash storage hard drives in the brand new Macbook Pro Retina Display laptops that were just released a few days ago (10.22.13) be upgraded/replaced in the future? I will need more than the basic 256GB for sample libraries using music software, among other things, but currently larger flash drives from Apple are too expensive. I ask because I'm in the process of buying one of the new 15inch Macbook Pro Retina Display laptops right now (or at least right after I get an answer to this question).
I saw in the Mac store when I started looking at the build options for ordering the Macbook Pro that under Memory it said the memory was built into the computer and therefore could not ever be replaced or upgraded in the future. So I was wondering if something similiar might be the case with the flash storage drives even though the same wasn't written under the hard drive options? If these flash drives can be replaced in the future then I would just purchase the starting 256GB drive and suffer through using connected external hard drives, as unwieldy as that would be, until there were potential replacement flash drives with larger storage capacties available on the market or through Apple for more reasonable prices. But if the hard drives in these laptops can't be replaced/upgraded I would go for the 500GB drive option (even though paying an additional $300, before taxes, for just 244GBs more storage space is absolutely outrageous no matter how great flash drives are with their read/write speeds, no moving parts to break, and lighter weight/thinner builds allowing for an overall thinner laptop). I would even go for the larger 1TB option, which is really what I need, except that costs an additional $700 which is more than enough to buy me a new 50inch, HD, flatscreen TV from a reputable brand if I were so inclined! (And yes, I understand the youth of the technology, current limits to flash drive capacities, and the reason for the high prices. I know I'm not getting bilked...)
So yeah, does anybody have an answer to this question? Can the flash hard drives in the new Macbook Pro Retina Display laptops, just released, be upgraded/replaced in the future? Any answers are greatly appreciated and will save me some much needed cash on my purchase of one of these laptops! And I should also ask, if so, can they be replaced by the laptop owner with the normal toolset through the normal, easily done methods of hard drive replacement in laptops that has been common, or would I have to bring the laptop to a Apple technician?
Thanks everybody!

The modules are proprietary. They are installed in a slot secured with a tiny screw.
macsales.com has been working on providing aftermarket modules for the older models that were on the SATA Bus.
These newer ones are likley directly on the PCIe Bus. That will take some time to develop.

Abap development in AFS Module

Hi ABAP Gurus,
I am working as abap developer.
I need to work on afs module.But i am new in AFS module.
If any one has any good information like
what kind of development we need to do in AFS and
how to find usefule tables and basic understanding of AFS module.
If any one has document for AFS which will help to understand the
basic of afs then please forward me on this email id : [email protected]
Thanks,
Jack

Hi Jack,
An abap developer has to basically do the same stuff in AFS as he does in any other module. The only difference is that we also need to take the size into account. The fields related to size normally start with J_3A and you can see in any table(Ex: MARA).
Let me give you an example. I was required to develop a form for invoice. In normal circumstances, we are required to put in the Material Number and the Price, but when you are dealing with AFS, we are required to put it Material Number, and the price for each corresponding size.
Regards
Aneesh.
Get back to me if you got any more questions.

ABAP Development Estimate

Hello,
I have user request to develop a custom ABAP program that would combine the following:
1. Credit Master Data, Limits and Exposure data from FD33.
2. VA05 Order Backlog data
3. KE30 PA Report showing sales by customer and sales area.
4. A/R data from F.21
all in a new custom program. I have quoted an estimate on the number of days it
would take to design, code and test this development but I would like some external feedback from the ABAP community on how long this development would take.
Can you provide just some rough estimates on how long it would take an ABAP developer to write a program to combine all this information in a ALV report.
The user would want to select and filter all this data by customer number and sales org,distribution channel and division.
Thanks
chris

Hi Chris,
The estimate depends upon the complexcity of the issue or the design. Some companies have ABAP effort estimation tool which gives a rough figure of the total number of days required to develop a object based on the complexcity of the object.
Try to analyze and see how many database select is required, how many screens to be developed, how complex is the list output and how many test scenarios have to considered in unit testing. All these factor will contribute to determine how long it would take to develop an object. It also depends on the skill set your team has. If a person who is good in SAP SCRIPT would take less number of days to develop the script if its assigned to him. So it all depends on what kind of object you have to develop and its complexcity.
Cheers
VJ

ABAP Development Workbench with WAS 6.4 ?

Where to get ABAP Development Workbench ?
Hello sap gurus, I am new to ABAP. I alredy have SAP NetWeaver Enterprise Portal on MaxDB - Developer Edition Sneak Preview installed on my server. However I want to use the ABAP Development Workbench. I do now want to buy a book with cds or go to the sap shop site to get minisap.
Is there any way to Use ABAP Development Workbench with Web Application Server 6.4 or 6.1?
If yes where to get the WAS 6.1?
Thanks

Hi,
What you need to install is the ABAP stack. This would be on your Netweaver installation CDs. Please have a look at service.sap.com/instguides for more in-depth installation instructions.
If you just have the Portal then you only have the Java stack (the Portal is really just an application deployed to the Java stack.)
Also do soe searches on SDN on how to integrate the 2 stacks..,

Role of an ABAP Developer in XI

Hi,
I had worked on R/3 as an ABAP dev and I am planning to move to SAP XI.
I had gone through the XI fundamentals and I see that for an ABAP developer its a switch from an ERP to EAI tool. Before I start off with XI I thought to write to the right people to get myself cleared of my concerns.
I request anyone of you to provide me info on the below queries.
1) Is ABAP knowledge helpfull in SAP XI projects.
2) Is it possible to build the mapping logic in ABAP.
3) Is it mandatory to learn Java.
4) Will my knowledge on ALE/IDOCs and workflow will someway be helpfull to me in SAP XI.
5)4) Finally, Is XI recommened for an ABAP developer?
Thanks,
Ram.

Hi,
1) Is ABAP knowledge helpfull in SAP XI projects.
Most definately. As loads of time we have SAP as one of the interacting system. so your work is always easier in case of any middleware application if u know hte application system interacting.
2) Is it possible to build the mapping logic in ABAP.
yes u can. check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
3) Is it mandatory to learn Java.
U don't need to be a guru but basic knowledge is going to really help.
4) Will my knowledge on ALE/IDOCs and workflow will someway be helpfull to me in SAP XI.
Very. Business process engine in SAP XI uses Workflow.
5)4) Finally, Is XI recommened for an ABAP developer?
this is one of the new end technology. so yes I guess
Regards
Vijaya

What happen to julius thread in ABAP DEVELOPMENT?

It was reformatted by the new 5000 characters per post limit
I am busy working on a solution to split them and move each part to its own respecting sub-development forum - but have not got to it yet. Sorry for being slow.
The FAQ and memorable discussions thread in the Security Forum is affected as well, but there is only one forum... :-((
Any creating ideas on how to fix that one (other than removing information from it)?
Cheers,
Julius

Actually it is happening since couple of week. Might be you have found yourself in this situation now.
Also there are two thread already open on the same. Perhaps you missed them.
Improper display of threads
And outstandingly "what happen to julius thread in ABAP DEVELOPMENT?" Nice Subject Line
Perhaps, It looks [Line of the day|Re: Line of the day!] !!
P.S. Subject tempered (Or Perhaps corrected)....;-)
Anyways,
@ Julius: Since there is 5000 Characters Limit has been introduced for keeping the forum neat, undersized and informative as much as possible rather than long bulky programs.
But My Question is What about the Programs and Threads which had already been posted in last 5-6 Years of SDN(now SCN)?
I can see all the previous threads also have been affected!
So Does SAP having any Programmer In their team of Michael Goeck or David Branan(Who is working from behind the scene ) to introduced the restriction of 5K chars based on Date?!?
Cheers

Brand New - Jnr ABAP Developer

Similar Messages

Maybe you are looking for