Break execution after custom run-time error handler callback

I am using Teststand 2010 SP1 and have written a custom runtime error handler based on the ErrorHandlerExample example that ships with TestStand. It has been implemented as a StationPostStepRuntimeError callback in my Station Callbacks folder. I have modified the example as follows:
(1) Added code to turn off the UUT transmitter if it was on.
(2) Added a call to an executable that sends an email to the currently logged in user.
(3) Calls the standard TestStand run-time error dialog using the Engine DisplayRunTimeErrorDialog method.
(4) Processes the user's selection, then turns on the UUT transmitter for any option other then Abort.
The callback also checks the status of the Break and "Don't Show again for this execution" options selected by the user. If the user selects Break then the only option I can find is to call the API Execution.Break() method which breaks the execution right there in my callback. The user then has to single step there way out of the callback. Is there a way of instructing TestStand to complete the callback execution and break immediately after completing the callback (i.e.at the step following the error)? I've zipped up and attached my modified sequence.
Alternatively, is there a better way of doing this?
Regards,
David
Solved!
Go to Solution.
Attachments:
StationCallbacks.7z ‏13 KB

Didn't have a chance to try it yet but maybe StepOut is your solution?
From the TS Help:
StepOut Method
Syntax
Execution.StepOut
Purpose
Resumes the execution from a suspended state and then suspends the execution again after execution of the current sequence completes.
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Similar Messages

Run-time error handling without popup

I'm searching for a way to make a CVI executable more robust by performing an automatic routine if any run-time error occurs. Basically I don't like the fact that a popup is displayed and the program is halted in the event of a fatal run-time error.  I cannot prevent a fatal run-time error from ever occurring so I was hoping there was a way to handle it automattically when CVI detects it. So far though, the only thing that I've found is the CVI run-time error popup which suspends the program until user input or in release mode, a Windows popup that suspends the program in a similar manner with more cryptic OS level exception info. I'm using Windows XP and CVI 2009, thanks.

Ok, well, the source of the fatal run-time error seems to be within a function call to imaqSnap within the NI Vision library. imaqSnap() is a function that just grabs 1 frame of video. We're using NI Vision 8.5 with a PCI-1422 Imaq card and whenever there is no signal present at the input of the card, we get the following error:
FATAL RUN-TIME ERROR:   "Imaq_support.c", line 187, col 18, thread id 0x000004F8:   Function : (errorCode = -1074397150 [0xbff60022]). A timeout error occurred while waiting for the specified event. If waiting for an image, verify that all video data is acquired within the timeout period. If waiting for a signal, verify that the signal assertion occurs within the timeout period.
Line 187 is the line with the call to imaqSnap shown below:
                                            /* Initialize the Image Capture system */
                                            /* Open an interface and a session */
      ApplErrChk(imgInterfaceOpen ("img0", &Iid));
      ApplErrChk(imgSessionOpen (Iid, &Sid));
                                            /* set aquire mode */
    /* Snap a picture : ImaqBuffer is NULL, memory will be allocated by NI-IMAQ */
      AcqImage = NULL;
      AcqImage = imaqSnap (Sid, NULL, IMAQ_NO_RECT);
      if (AcqImage == NULL) {
        ErrNull = TRUE;
        iErrCode = imaqGetLastError();
        if (iErrCode != ERR_SUCCESS) goto tst_exit;
It seems to me that this should not be a fatal run-time error, it should instead throw a non-fatal timeout error and allow our calling code to handle the null reference to the image. Since it's a fatal error though, it doesn't allow me to ignore the run-time error and handle it gracefully. The Sid and Iid references look fine when it throws the error so I'm unable to detect the problem before the function call. Any thoughts on how to fix this issue?

Make Custom (Run-Time Error Dialog Box)

I would like to Customize the Run-Time Error Dialog Box
bcos I want to use H/Wbuttons (need to Init the H/W) & not mouse to navigate thr the box
is the Dialog box available in Labview also

Hello aparab,
You won't be able to edit the dialog in LabVIEW for sure. Not sure if NI provide CVI / C++ source for that.
You can have your own dialog by handling the run-time error using SequenceFilePostStepRuntimeError callback. Look at this example:
http://zone.ni.com/reference/en-XX/help/370052M-01/tsexamples/infotopics/callbacks_sequencefileposts...
The example ships with TestStand as mentioned in the above link. You just have to use the information which will be in Parameters.Step container for error details and to customise your dialog.
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Custom run time error message into C# UI

Hi,
I'm trying to get the error message for the last step into my C# UI (using TestStand3.5).
I've tryed the GetRunTimeErrorMessage in the UIMsg_Trace message event, but it doesn't work.
Probably I should use the PostStepRunTimeError callback instead? Is there a sample code available in C# using it?

I'm getting the error code and the message, se below, but I also want to get the location info as in the standard TS error popup.
The boolean Occurred parameter seems to be false even if I get an error. Is it reset to false or something?
int frameID = 0;
errorCode = axExecutionViewMgrs[index].Thread.GetSequenceContext(0, out frameID).AsPropertyObject().GetValNumber("Parameters.ErrorLoad.Code", 0);
details = axExecutionViewMgrs[index].Thread.GetSequenceContext(0, out frameID).AsPropertyObject().GetValString("Parameters.ErrorLoad.Msg", 0);
location = axExecutionViewMgrs[index].Thread.GetSequenceContext(0, out frameID).AsPropertyObject().GetValBoolean("Parameters.ErrorLoad.Occurred", 0);

Run time error in FMBB after execution of RGZZGLUX GETWA_NOT_ASSIGNED FM

Hello Experts,
We have activated funds management in Development it is working fine without any issues. Transported same changes to Quality system and executed Program RGZZGLUX.
Issue: Run time error in FMBB transaction code even after execution of program RGZZGLUX. similar error in funds center group also.
Category               ABAP Programming Error
Runtime Errors         GETWA_NOT_ASSIGNED
ABAP Program           SAPLFMBD_DATABASE_ACCESS
Application Component PSM-FM-BCS-BU
Date and Time          10.06.2014 13:28:36
Short text
    Field symbol has not yet been assigned.
Requirement: Please let us know how to solve this issue
we have checked note:0000939958 - and changed Inactive status for tables FMIT, FMIP and FMIA, but no use, when we run program RGZZGLUX, it has deactivated this tables again.
Regards,
Chalapathi

Hello Shyam / Javed,
Thank you for your inputs.
I have solved issue, now it is working fine.
Activated EA-PS and included into transport request. executed program RGZZGLUX.
Note used to solve issue :0000908007
Regards,
Chalapathi

Portal Run time error after deploying custom logon page par file in portal

Hi Experts,
We have customized the standard portal logon par file for client XYZ and imported it with the same name (com.sap.portal.runtime.logon.par) in portal.
It is working fine for XYZ . And another client ABC wants the same customization for them also. So we took the par file from XYZ and imported it in ABC system. But in ABC system, we are getting Portal Run time Error. When we checked the logs, it is showing error in LogonBean class.Wwe have included the necesary jar files. Could anyone help us in identifying what is missing?
Thanks
VJ

Hello Vijay,
Please paste or attach the error log.
Regards,
Haseena

ABAP Run time error when display the Customs Export declarations

Hi,
I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
While debugging we found that Primary Key of the below structures are not the same
lt_corpar                              type      /sapsll/corpar_t
lt_corpar_ht      type      /sapsll/corpar_k02_ht
Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
Error message short details
Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
     "/SAPSLL/CUHD_LOAD_SELECTION".
    The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
    In the source code you have the termination point in line 144
    of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
Regards,
Pradeep Maddi

Hi,
I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
Proforma Invoice not transferred to GTS
After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
Error details
Runtime Errors         ITAB_DUPLICATE_KEY
ABAP Program           /SAPSLL/SAPLCUHD_SELECTION
Application Component SLL-LEG
You tried to insert an entry into table "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
Regards,
Pradeep

Custom Run-Time Menu error when named "FileMenu.rtm"

Discovered an interesting "feature" (error?) in LabVIEW 2009 when using custom run-time file menus.
If you create a custom run-time menu (.rtm) and name it "FileMenu.rtm" the menu will not function correctly in executable format.
In my LabVIEW Project, any VIs which called this custom file menu worked correctly in the project, but when I built an executable, the VIs defaulted to the default file menu. This was not due to a corrupted .rtm file or the file not being included in the executable. Instead after extensive debugging I determined that the name "FileMenu.rtm" is somehow reserved in LabVIEW and any executables that are built have the custom run-time menu overwritten by the default. The tricky part of this error is that it goes unnoticed while the code is still in development and only presents itself after being built into an executable.
Simply changing the name of the file fixed the executable run-time menu.

Chris,
Thanks for trying it out. It seems that my forum post may have been a bit rushed.
I tried to duplicate the problem in a new project from scratch and similarly was unable to reproduce it. I will try more soon, and in doing so perhaps reveal the true underlying problem. I would post the original code but it is proprietary.
I was running LabVIEW 2009 and Windows XP when the problem first presented itself. I updated to LabVIEW 2009 SP1 as part of my debugging and the problem still presented itself.
V/R,
~David

Run time error after starting eclipse

Hello,
after installation of the SAP Eclipse Theme Editor the following run time error is reported after each restart of eclipse:
java.lang.ClassCastException: com.sap.ur.plugins.ThemeEditor32Input cannot be cast to com.sap.ur.plugins.ThemeEditorInput
     at com.sap.ur.plugins.ThemeEditor.init(ThemeEditor.java:188)
     at org.eclipse.ui.internal.EditorManager.createSite(EditorManager.java:798)
     at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:647)
     at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:465)
     at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)
     at org.eclipse.ui.internal.EditorAreaHelper.setVisibleEditor(EditorAreaHelper.java:271)
     at org.eclipse.ui.internal.EditorManager.setVisibleEditor(EditorManager.java:1429)
     at org.eclipse.ui.internal.EditorManager$5.runWithException(EditorManager.java:942)
     at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
     at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:4041)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3660)
     at org.eclipse.ui.application.WorkbenchAdvisor.openWindows(WorkbenchAdvisor.java:803)
     at org.eclipse.ui.internal.Workbench$31.runWithException(Workbench.java:1567)
     at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
     at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:4041)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3660)
     at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2548)
     at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438)
     at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671)
     at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
     at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:664)
     at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
     at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:115)
     at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:620)
     at org.eclipse.equinox.launcher.Main.basicRun(Main.java:575)
     at org.eclipse.equinox.launcher.Main.run(Main.java:1408)
I can work with this editor anyway after choosing the project. But I still have a problem because the preview will not change when I choose a different UI element. The preview alway shows the text "welcome to the SAP ThemeEditor!". When I modify style parameters for the UI element Text the preview is modified in the right way. I already set the Internet Options for the Internet Explorer as suggested. Is it possible that the reported run time error is the reason for the preview problems? The external preview works fine.

Hi,
I would suggest you to remove NWDS, then ensure that nothing left on the disk related to NWDS, and then try a fresh install.
Best Regards,
Ervin

Run-Time Error '6' Overflow within BEx Analyzer after copy/paste query

Hi all,
User is getting a "Run-time error '6' overflow" message which is caused after copying any query in a 'query pack' to any free row/column within the same sheet (BEx Analyzer). This "query pack" has multiple queries within one sheet and covers 1800 rows so there is enough free space left for copying one of the queries to another position in the same sheet.
Microsoft Office Excel SP2 is used which is part of MS Office professional edition 2003. The BW version is 3.0.
Please let me know if more details are required or above mentioned error message is recognized and can be explained.
Thanks and kind regards,
Raymond Flaton

Hi VRV,
This error is caused whenever there is memory issue. If your query is built on a cube which has a BWA index then this problem can be related to the issue with the BWA server. Check your BASIS team to check if there is memory issue presently in the BWA server.
Sometimes the issue is temporary, where the several users accesing the reports to fetch data from BWA lead to this type of error as the BWA gets overloaded. Try exiting the report and run it after some time again.
Alternatively you can also try restricitng the selection for fetching the data in the report as suggested.
Thanks

After updating my itunes per the update notice I received a run-time error R6034 message. Now I am unable to use iTunes. What can I do to repair this error?

After updating my iTunes per the update notice I received a run-time error R6034. Now I am unable to access iTunes at all.
Can someone tell me how to correct this problem?

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

After migration EP 5.0 to EP 6.0 SR1 Run Time Error Occured

Hi,
After all migration processes (except the post-migration steps ) we bounced the portal and got a run time error. We checked the error log and it was : cannot get user management factory class. We already reviewed two oss notes which were 728075, 713210 and couldn't fix our problem. Here is the error message and the information about our system.
From EP 5.0 SP6 P1 HF8 to EP 6.0 SP9 Patch 8
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
The exception was logged. Inform your system administrator..
Exception id: 04:10_08/09/05_0002_9436550
See the details for the exception ID in the log file
Does anyone have any idea? please let me know.
Thanks
Serkan
Message was edited by: Serkan Tumer

Hi Serkan
Please Check the log file for the exact nature of the error. You can find the log file in this location on your server.
<Directory>:\usr\sap\CP1\JC00\j2ee\cluster\server0\log\DefaultTrace
Do let us know what error you are facing.
Warm Regards
Priya

'CONVT_NO_NUMBER' run time error in custom program of upgraded ECC system.

Hi,
I am getting a run time error in custom program and st22 shows 'CONVT_NO_NUMBER' as the cause.
We have just upgraded system to ECC6 and with 4.7 we were not getting this error.
Can you please let me know if there is any SAP note to address this ?
Thanks,
Avinash

Hi Avinash,
Please see the below link for Sap Notes:
[Program is giving a Short Dump u201CCONVT_NO_NUMBERu201D.;
Regards,
Md Ziauddin

Run time error in VA01 after entering material at item

Syntax error in program "SAPFV45V ".
Error in the ABAP Application Program
The current ABAP program "SAPMV45A" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPFV45V " in include
"FV45VF0A_ADD_ATP_DATA_TO_VBAP " in
line 38:
"The data object "XVBAP_LOC" does not have a component called "STOCKLOC
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPMV45A" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Can you please let me know the reason for this error.
we have completed configuration in DEV and moved all the requests into QAS
and at the first transaction of [VA01] immediately after entering material and qty
it is throwing the run time error.
please let me know, whether this error is from functional side, or from technical
(BASIS).
Please also let me know, what can be done immediately.
Thanks
Maheshoe

You need to apply SAP Note to fix this.
find the note below:
[NOTE 1072316|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1072316]
Take assistance from your Basis.

Run-time error "5010": Labview: VI execution ...

I get Run-time error "5010": Labview: VI execution terminated by server. This error occurs sporatically. I am running Visual Basic 5.0 application that communicates to Labview 6.1 VIs. It is using NI-Imaq to do vision analysis of parts. I just need to know what to look for that may be causing this error. I am also running it on a PXI system with 64 MB of memory.

Hello,
I recommend you to do direct function calls to NI-IMAQ and NI Vision function libraries from Visual Basic as this will be a lot more efficient and improve rubustness of your application. During the installation of both software, you have the option to include support files for Visal Basic. Once these components are installed you should see the shipping examples in the following directories (if installed in the default path):
(NI-IMAQ) C:\Program Files\National Instruments\NI-IMAQ\Sample\VB
(NI Vision) C:\Program Files\National Instruments\MeasurementStudio\VB\Samples\IMAQ
There are additional examples that can be found in the Code Library (see the link on the left sidebar).
Let me know if you have further questions regarding this issue.
Regards,
Yusuf C.
Applications Engineering
National Instruments

Break execution after custom run-time error handler callback

Similar Messages

Maybe you are looking for