Break Formatting in Tbular Forms

I am running Application express Release 4.1
I would like to use break formatting in a tabular report and seems that the "row selector" is preventing me from doing this.
I have wanted to do this many times in the past and always resort to manually creating a report and writing insert, update and delete processes.
Was wondering if there has been any new development in this area. I would really like to use a tabular form and the MRU/MRD processes and not have to write all of this code.
Thank you in advance to anyone who replies to my post.
Best Regards,
Sandra

Update to my problem:
I had originally created the tabular form using roid insteadof existing trigger.
I recreated using existing trigger with add/update only (no delete needed) and then I was able to drop the row selector without impacting functionality.
Without the row selector Ican break on first column.

Similar Messages

Question about Break Columns on Tabular Form

is it possible to have the following result on apex Tabular Form while doing Break Columns ??
To place one blank line between departments, enter the following command:
BREAK ON DEPARTMENT_ID SKIP 1
Now rerun the query:
DEPARTMENT_ID LAST_NAME                     SALARY
           20 Hartstein                      13000
           80 Russell                        14000
              Partners                       13500
           90 King                           24000
              Kochhar                        17000
              De Haan                        17000
6 rows selected.The result achieved was not as expected, the sample is hosted on https://apex.oracle.com/pls/apex/f?p=10037 demo/1234 please help
Region Source :
select DEPTNO, EMPNO, ENAME, JOB,MGR, HIREDATE, SAL,COMM
from "#OWNER#"."EMP"Report Attributes :
Break Columns - First Column

LTaura wrote:
what does the built-in tabular form and break functionality do ?The built-in tabular form wizard generates the tabular form report and ApplyMRU and ApplyMRD processes to handle the submitted form.
The report renders the retrieved data values as HTML form controls to enable them to be edited by the user. The <tt>DEPTNO</tt> in from the first row in your query is rendered thus:
<input type="text" name="f01" size="16" maxlength="2000" value="10" id="f01_0001" autocomplete="off">and that in the second row as:
<input type="text" name="f01" size="16" maxlength="2000" value="10" id="f01_0002" autocomplete="off">Since these are not exactly the same (different <tt>id</tt> attributes), the built-in break formatting sees them as different values, so no report break is applied.
However, even if this was not the case and the break was applied to give only 3 text items for the 3 <tt>DEPTNO</tt> values, the ApplyMRU and ApplyMRD processes expect a <tt>DEPTNO</tt> value to be submitted for each row, and would fail for the subordinate <tt>EMP</tt> rows where it was missing.

Problem with Break Formatting.

I have a simple report with 6 columns. I specified breaks to be on the First and second column. That all works ok. Now I want to have an extra blank line between the break groups.
1.How would I do that?
2.I tried entering text in the field "display this text before break columns", but it never shows up in the report. Did I miss something?

it turns out that some of the options available in that Break Formatting section of the report attributes screen are a little buggy. you can only get text from that "When displaying a break row, display this text after all columns" field to show if at least one of the columns in your report is showing sums. same applies for a few of the other columns in that region. if you do decide to show sums on your report, then the values you enter into those "When displaying a break row..." fields require you to enter your html table formatting like TRs and TDs (which isn't necessarily a bad thing). anyhow, we do have some fixes to make in this area, but maybe the following might be an acceptable start to a work around for now:
--indicate that you'd like your breaks on "First and Second Column"
--leave the other fields in that Break Formatting section blank
--indicate that you'd like to "Repeat Headings on Break"
--consider nulling out the column heading values you specified at the top of the report options screen (so as to counter the affect of the previous step if that's considered undesirable)
this at least puts that extra line in after your line breaks. to see what's really going on, you could drop a string like...
<tr><td bgcolor = "RED" colspan="xxx"> </td></tr>
...into that "For repeat heading breaks use this format, use #COLUMN_VALUE# subs" field (where xxx is the number of non-breaked columns in your report). that'll show you where/how that repeat heading html is rendered, so you might be able to work something further out from there.
hope this helps,
raj

Oracle APEX Classic Report Break Formatting

I created a classic report. Under report attributes I defined Break Formatting as "First, Second and Third Column".
The data columns for this report are Domain, Discipline, TechnologyArea and Products.
Domain is the parent. Discipline is a child of domain. TechnologyArea is the child of Discipline. Products are children of TechnologyAreas.
Domain prints in the first column, Discipline in the second, TechnologyArea in the third and Product in the fourth. There are one to many products for any TechnologyArea - and one to many TechnologyAreas for any Discipline - and one to many Disciplines for any Domain. The report is sorted on Domain, Discipline, TechnolgyArea and Product. Therefore domain prints over and over and over. Discipline prints over and over until it changes. TechnologyArea prints several times before it changes. I don't like that.
I want the report to print Domain and not print it again until it changes. I want it to do the save for Discipline and TechnologyArea.
I set break formatting to "First, Second and Thrid Column". Now Domain prints once and does not print again until it changes. So far so good! Now Discipline prints once and does not print on subsequent rows until the discipline changes. So far so good! The TechnologyArea name prints on every row. That's not good.
Given this pattern, if there were an option for First, Second, Third and Fourth columns I think that would give me the report I want - but there's not. Can anyone tell me how to stop TechnologyArea from repeating on every row?

This look about right?
notice the last two records in the with statement are duplicates.
with test_data as(
    select 'MAMMAL' domain, 'DOG' discepline, 'BEAGLE' technologyArea, 'SQUEEKY TOY' product from dual union all
    select 'MAMMAL', 'DOG' ,   'RETRIEVER', 'SQUEEKY TOY' from dual union all
    select 'MAMMAL', 'CAT' ,   'LION',      'SQUEEKY TOY' from dual union all
    select 'MAMMAL', 'CAT' ,   'CHEETAH',   'SQUEEKY TOY' from dual union all
    select 'MAMMAL', 'DOG' ,   'DINGO',     'SQUEEKY TOY' from dual union all
    select 'REPTILE', 'LIZARD', 'IGUANA',    'LARGE ROCK' from dual union all
    select 'REPTILE', 'LIZARD', 'GUILLA MONSTER', 'LARGE ROCK' from dual union all
    select 'REPTILE', 'SNAKE', 'CORAL',     'LARGE ROCK' from dual union all
    select 'REPTILE', 'SNAKE', 'PYTHON',    'LARGE ROCK' from dual union all
    select 'REPTILE', 'SNAKE', 'KING',      'LARGE ROCK' from dual union all
    select 'MAMMAL', 'DOG' ,   'BEAGLE',    'BONE' from dual union all
    select 'MAMMAL', 'DOG' ,   'RETRIEVER', 'BONE' from dual union all
    select 'MAMMAL', 'CAT' ,   'LION',      'BONE' from dual union all
    select 'MAMMAL', 'DOG' ,   'DINGO',     'BONE' from dual union all
    select 'REPTILE', 'LIZARD', 'IGUANA',    'HEAT LAMP' from dual union all
    select 'REPTILE', 'LIZARD', 'GUILLA MONSTER', 'HEAT LAMP' from dual union all
    select 'REPTILE', 'SNAKE', 'CORAL',     'HEAT LAMP' from dual union all
    select 'REPTILE', 'SNAKE', 'PYTHON',    'HEAT LAMP' from dual union all
    select 'REPTILE', 'SNAKE', 'KING',      'HEAT LAMP' from dual union all
    select 'MAMMAL', 'CAT' ,   'CHEETAH',   'BONE' from dual union all
    select 'MAMMAL', 'CAT' ,   'CHEETAH',   'BONE' from dual
select * from(
select
    case when domain         != nvl(domain_lag,        ':START:') then domain         else null end as domain,
    case when discepline     != nvl(discepline_lag,    ':START:') then discepline     else null end as discepline,
    case when technologyarea != nvl(technologyarea_lag,':START:') then technologyarea else null end as technologyarea,
    case when product        != nvl(product_lag,       ':START:') then product        else null end as product
from(
    select domain, discepline, technologyarea, product,
           lag(domain,1)         over(order by domain, discepline, technologyarea, product) domain_lag,
           lag(discepline,1)     over(order by domain, discepline, technologyarea, product) discepline_lag,
           lag(technologyarea,1) over(order by domain, discepline, technologyarea, product) technologyarea_lag,
           lag(product,1)        over(order by domain, discepline, technologyarea, product) product_lag
      from test_data
     order by domain, discepline, technologyarea, product)
where coalesce(product, technologyarea, discepline, domain) is not null
edit
I did not understand the question properly before submitting this. Here it is anyway.
Cheers,
Tyson Jouglet
Edited by: Tyson Jouglet on Jan 26, 2011 2:42 PM

How to Suppress Report Total When Using Sum on Columns & Break Formatting

I need to know how to NOT show the report total line when using the sum functionality with a break in a report.
I am summing two columns, a debit amount and credit amount. I am breaking on the first column which is the level of a hierarchical query. I want to see something like this:
Parent Record xxxxxxxxxxxxxx
Parent Sum $$ $$
Child Record xxxxxxxxxxxxxx
Child Record xxxxxxxxxxxxxx
Child Sum $$ $$
However, when I run the report, I also get a report total line under the child sum which is really meaningless for this report.
I have also tried creating this report as an interactive report. When applying the sum on the two columns, I do get the sum totals on the break only - no report total - however, it is reversing the order of the hierarchical query results putting the child records first and the parent records second.
Thanks in advance for your help.

Hi, and welcome!
I don't think that there's an easy way to "switch off" the Total line on a report. The nearest I could suggest would be to either hide the entire row or colour the text so that it's the same as the background - either way, the total is calculated but the user won't see it.
If you put something like the following into your report region's Region Footer:
<script type="text/javascript">
var outertable = document.getElementById("#REGION_ID#");
var innertable = outertable.getElementsByTagName("TABLE")[1];
var rs = innertable.rows;
var lastrow = rs[rs.length-1];
if (lastrow.cells[0].innerHTML == '<b>TOTAL</b>')
rs[rs.length - 1].style.display = "none";
</script>Then, on your report's Report Attributes page, scroll down to the Break Formatting section and put TOTAL into the "Display this text when printing report sums" setting. Also, in the "Layout and Pagination" section, set "Enable Partial Page Refresh" to No.
The above code is based on the report and region templates that I'm using here: [http://apex.oracle.com/pls/otn/f?p=267:147] (Theme 18, "Report Region" region template and "Standard" report template). Your report may use different templates, so the first two lines on the code may have to change. #REGION_ID# would be replaced with the region's ID value (which would be "R" followed by a long number). As long as you can identify the HTML tag that uses this ID value, you can then get to the actual table that contains the data as it would be a TABLE within that tag - the [1] above is the second table within the region. In some instances, you may have to use "region_#REGION_ID#" as the starting point.
Andy

Display problem - report /w break formatting

Hi everyone,
I'm having a display problem in a standard report with break formatting on first column and repeat headings on break. Whenever I start a new page and a new group of data starts, the heading for the break is displayed 2 times. If the new page doesn't start with a new group, there's no problem.
I've made an exemple there : http://apex.oracle.com/pls/apex/f?p=25160:9
You can see the group #1 on the first page, no problem there.
On the second page, the group #2 begins and the header is repeated.
On the last page, the header for group #3 is not repeated because it was started on the previous page.
Why is the header for group #2 repeated ? How can I correct this ?
Thanks,
Patrick

Hi all,
I think it is a BUG, that was not fixed in 4.2.
Is it possible to workaround it????
Probably dynamic action with something like this javascript $("#my_table_id").find("tbody tr:(:eq(0))").remove(); With "On-Change" Event on the Region?
But this javascript should be execute only on the pages greather than 1. How can I check in javascript which page of report is actually shown???
Ideas, please!

How to print form into pdf format using smart forms in abap

please let me know how to print form into pdf format using smart forms in abap.
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Mar 25, 2011 2:04 PM

Hi ,
refer this link
<removed by moderator>
Regards,
Dhina..
Moderator message: please do not reply to questions that violate forum rules.
Edited by: Thomas Zloch on Mar 25, 2011 2:04 PM

Preserving control break formatting in report downloads with BI Publisher

Hello,
I am using APEX 4.0.2 and would like to know if anyone has a step by step process or tutorial for preserving control break formatting in an interactive report that has been downloaded to any or all of the available file formats. I am using BI Publisher, to which I am very new, to do the report printing of the Reports Region to a PDF, RTF, XLS, CSV or HTML file. Currently, when we download the report to any of the file formats, the formatting is stripped out and only standard row/columns are being saved.
BTW, I have changed my username to something more friendly but it has not yet taken effect.
Thanks,
Marcy

Hi Venkat,
Thanks for your quick respond.
1.) Auto Run is enabled. And the report runs automatically as well. But then it ignores the dashboard prompt (as a regular report would do as well). But when I choose some values in the prompt and then press go. Then it says I have to press on view as well.
2.) no that is not the case. My report is so big that it always need a scroll bar ;) also adjusting the size settings in the dashboard doesn't help. The only occurs when viewing in HTML, when previewing in excel or RTF it all just work fine.
3.) true, but ow well this is the least importetant one ;) so if this doesn't work, than it doesn't work ;)
4.) Ok, I will have a look on that.
5.) I did enabled HTML and EXCEL outputs in my BIP report. But when the first point is working, then I don't want to see the control bar anymore and I want to have the output on the dashboard in HTML and then I want to build a button, or a link or something that exports the request to excel. Is that possible?

Non-Interactive Report Break Formatting

I have a non-interactive report that is very large and I am trying to use break formatting to provide subtotals. It works, but is quite ugly. Can anyone tell me where I might find a list of the various substitution strings that can be used for controlling the appearance of the breaks? For example, right now when it breaks for a change in "Payor Name", the subtotal row is labeled "Total for Payor Name". It would be much friendlier if the row label said "Total for Aetna" when Aetna is the Payor Name and "Total for Cigna" when the Payor Name is Cigna, etc. For example
[Parent Name|http://ndhoast.tsh.mis.mckesson.com:7778/pls/apex/f?p=123:75:720425469268847:fsp_sort_1_desc::RP&fsp_region_id=27444927281350588|Sort by this column] [Payor Name|http://ndhoast.tsh.mis.mckesson.com:7778/pls/apex/f?p=123:75:720425469268847:fsp_sort_2::RP&fsp_region_id=27444927281350588|Sort by this column] ClaimType ST [RH Payor ID|http://ndhoast.tsh.mis.mckesson.com:7778/pls/apex/f?p=123:75:720425469268847:fsp_sort_5::RP&fsp_region_id=27444927281350588|Sort by this column] [Naic/EmdPayor Id|http://ndhoast.tsh.mis.mckesson.com:7778/pls/apex/f?p=123:75:720425469268847:fsp_sort_6::RP&fsp_region_id=27444927281350588|Sort by this column] LOC TRX [TRX Count|http://ndhoast.tsh.mis.mckesson.com:7778/pls/apex/f?p=123:75:720425469268847:fsp_sort_9::RP&fsp_region_id=27444927281350588|Sort by this column] [TRX Dollar Amt|http://ndhoast.tsh.mis.mckesson.com:7778/pls/apex/f?p=123:75:720425469268847:fsp_sort_10::RP&fsp_region_id=27444927281350588|Sort by this column]
World Insurance Company World Insurance Company I - COMM085001 75276 DBQ CLM 18 $40,679.82
Total for: ClaimType *18* *$40,679.82*
P - COMM098401 75276 DBQ CLM 457 $129,959.38
Total for: Payor Name *475* *$170,639.20*
Total for: Parent Name *475* *$170,639.20*

This has been an area in need of some attention for quite a while, in my opinion.
Re: Formatting of Reporting Totals
Re: Report Break Formatting
I've just looked at 3.2, and the help messages are the same – not at all helpful – ones I remember from 1.6.
I'm seem to recall this was raised on one of the enhancement request threads, but it doesn't seem to have been touched...

Break Formatting not working correctly

Hi All,
I have a report that I am trying to use the break formatting option on. The columns are as follows:
Billing Code
Qty
Desc
Price
Billing Cycle
I am trying to use the Break on First Column selection, with a summary of Price. If I select QTY as my first column, this works great. However, if I select Billing Code as my first column, I get a break and summary after each row, regardless if the Billing Code is the same. Is there something I am missing?

Hello Jennifere,
Try using the order by clause on the column you want to break on. Something like
select "Billing Code", Qty, Desc, Price, "Billing Cycle"
from yourtable
order by 1as your report query, should work.
Regards,
Arie.

How to change the date format in xml form?

hi,
How to change the date format in xml form?
For example: 11/20/2008 3:00:03 PM -> 11-20 03:00
Any opinions greatly appreciated!
Thanks.
Edited by: ke wenxing on Dec 2, 2008 8:33 AM

You could go to System - User Profile - Own Data would take you to the "maintain user profile screen"
Click the defaults button and change the date format.This changes date format for all the dates in your login.

Interactive Report Need total of aggregate (sums) where break format used

I have an interactive report that uses break formatting. When I do an aggregate (sum) for the Quantity Column I get the sums for each campaign_id (used for the break format column). This is great. However, at the bottom of the report I need a grand total for all campaign ids (a sum of the sums) in a new row at the bottom of the report. Is this possible?
I can't paste a screenshot here to show but her is a simple one column example - I can't make the columns stay lined up but I think you can see what I need.
{code
Campaign Hand Addressed (break format column)
Quantity
100
200
Sum:300
Campaign Travel Check
Quantity
100
500
Sum:600
Sum:900 This is row I need to add
Oracle 11GR2
APEX 3.2.1

This works when I run it in SQL Developer. Now I enter this for my report query in APEX and I get the "not a GROUP BY expression.
{code
SELECT *
FROM t3_mail_piece t
WHERE t.week_id = 11
GROUP BY ROLLUP(t.campaign_id, t.market_id)
ORDER BY t.campaign_id
, SUM(t.quantity);
What is different?

Interactive Report - Break formatting style

Hi All,
Is there a way to make Interactive reports break format work/look like classic reports break format? i.e.1st,2nd,3rd column option. The way IR breaks is that is reserves a whole row for the column used in the break, which is not what I want, I want the report to look like the following:
city               emp           sal
Chicago     John Miller 1500
                 Mark Horton 2000
Denver       Rob Martino 1200
I tried to use rollup queries which work fine except that it does not do exactly what I want when I sort columns through the front end , I am basically displaying a check box for grouped records ( and I want it to display at the first record of each group), so the order is important. for example:
checkbox   City               emp           sal
[ ]               Chicago     John Miller    1500
                                  Mark Horton 2000
[ ]              Denver       Rob Martino 1200
Thanks,
Sam

would someone please confirm if this is doable/undoable at least? I've spend a lot of time exploring possible options (none worked) and it would really help if someone can help me saving some time.
Thanks in advance.

Break Formatting w/out Break Sums

I would like to create a report with break formatting on the first column and a grand total of the second column at the end of the report, but no totals per break on the first column. For example, what I would like is something like this,
Employee      | Task | Hours
Smith, John     1A     20
                1B     20
Jones, Karen    1A     35
                1B      5
Grand Total:           80but what I get when I select break formatting and mark a column to be summed is something like this,
Employee      | Task | Hours
Smith, John     1A     20
                1B     20
Employee Total:        40
Jones, Karen    1A     35
                1B      5
Employee Total:        40
Grand Total:           80I don't want those lines marked Employee Total, but I can't figure out how to get rid of them while keeping the Grand Total. Am I missing something obvious?
Thanks,
Ian

Hi Ian,
I haven't found a way to do what you want using the column break functionality.
However, you could change your sql statement to hide the repeating values. Have a look at the second post in the following thread:
Re: New Help with Address Display
the output seems to match what you're trying to achieve.
Regards
Andy

Default paragraph format in SMART FORMS

Hi all!
Can we mention default paragraph format for SMART FORMS? How can we do that?
Please suggest.

Goto FORM attributes of your smartform and insert your smart style in output options tab.. before inserting your smartstyle you should create a smart style and create a paragraph format in your smartstyle in header data of smartstyle it ask for standard paragraph(i.e default paragraph)...
Close rge thread once your question is answered.
Regards,
SaiRam

Break Formatting in Tbular Forms

Similar Messages

Maybe you are looking for