Break Point in BTE function module

i have function modules being triggered from 00002010
00002020 BTEs for tcode F110.How do i set break point in them .i mean is it posible 'coz i guess a session is being created every time i run f110.
Please help.
Thanks and Regards,
Venkat

1. Set a break point in your function module.
2. F110 Schedule a payment run (Specify a start time - Do not check Start immediately)
3. SM37 - Select your job and enter '=JDBG' in the command field
4. Continue and and the program will stop at you break point
Reward points if helpful

Similar Messages

About BTE function Module

Hi All,
I have to send ACH payment advice thru email to all the vendors.
for this purpose i am using SAMPLE_PROCESS_00002040 function module. but while configuring it using FIBF tcode it is saying there is no such event in TBE01 table it says. Can anyone please respond quickly on how to overcome this?

Hi Habib/Shiba
First thing is i am unable to create entries in TBE01. while creating an entry it is saying "First Create Data Element EV00002040 for the BTE". Then i went to SE11 and created data element with that name. But still the same error is coming while configuring in FIBF tcode.
Step1 : I have created a product in FIBF with active check box as checked.
Step 2: In FIBF , Environment>Info System(p/s)>Execute, i searched for 00002040 event. But this is not there? I still converted the FM in to 'Z', by directly going into se37.
Step 3: in FIBF, Settings>P/S Modules>Of a Customer. when i am trying to give event,product & function module name it is saying 'The Event 00002040 does not exist in TBE01".
Am I doing correct thing by going in to Settings>P/S Modules>Of a Customer or do i need to go to Settings>Process Modules>Of a Customer ?
Please suggest. An early reply is highly appreciated.
Edited by: prakash reddy on Jul 9, 2008 3:03 PM

Grouping and Page Break in ALV using Function Modules

Hi all,
I am trying to develop an ALV Report that will be grouped by vendor, some vendor information to be displayed on header. And, after each vendor;s records there should be a page break.
It should be something like this:
Vendor Number: 00012345454
Vendor Name: ABC Technologies, Inc
Vendor Country: USA
Item....Price...... Descriptopm
123....100,00......this is description
124....120.00......this is another description
PAGE BREAK
Vendor Number: 000123456545
Vendor Name: My Bank
Vendor Country: USA
Item....Price..... Descriptopm
223....32,00......this is my description
224....120.00......this is another description
Can anybody give some sample code for it ? I have tried a few codes from web, but they are not working.
Thanks.

Hi,
Try the following:
1. Build your sorting criteria. Pass this to ALV FM.
gs_sort-fieldname = 'VENDOR'.
gs_sort-group = '*'. "new page
gs_sort-up = 'X'.
APPEND gs_sort TO gt_sort.
2. Add event group level change. Pass this to ALV FM
gs_event-name = 'GROUPLEVEL_CHANGE'.
gs_event-form = 'GROUPLEVEL_CHANGE'.
APPEND gs_event TO gt_event.
Inside the form, retrieve your vendor details.
FORM grouplevel_change USING gs_lineinfo
                             gs_groups TYPE kkblo_grouplevels.
DATA: l_index     TYPE i.
IF gs_groups-level = 1.
    l_index = gs_groups-index_to + 1.
    READ TABLE gt_display INDEX l_index INTO gw_display.
ENDIF.
3. In the event top-of-page, display vendor details using write statements. For the first record, your structure (gw_display) will be blank, read from your data table first
FORM top_of_page.
IF gw_display IS INITIAL.
    READ TABLE gt_display INDEX 1 INTO l_display.
    IF sy-subrc = 0.
      WRITE: / l_display-vendor
    ENDIF.
ELSE.
    WRITE: / gw_display-vendor.
    CLEAR: gw_display.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program       = sy-repid
      i_callback_pf_status_set = 'SET_STATUS'
      i_callback_user_command = 'USER_COMMAND'
      is_layout                = gs_layout
      it_fieldcat              = gt_fcat[]
      it_sort                  = gt_sort[]
      i_save                   = 'A'
      it_events                = gt_event
    TABLES
      t_outtab                 = gt_display[]
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
Hope this helps.

How can I add enhancement points in a function module

Hi,
I want to create the Z Enhancement implementation in ABAP. We are on ECC 6.0. I want to add a Z enchancment in funciton module MRM_FINAL_CHECK can you please let me know how
Thanks for reading.

Hi Srikrishna,
Refer following link.. I'm sure these are very helpful to u..
http://help.sap.com/saphelp_nw04s/helpdata/en/42/d356adddec036fe10000000a114cbd/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/42/d356adddec036fe10000000a114cbd/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/42/d356adddec036fe10000000a114cbd/frameset.htm
Regards,
Vivek

Break point in Planing Function

Hi Everyone,
A planing function is not getting executed properly. I wanted to check it by executing with trace. I am trying to do it by putting some print statement and execute with trace.
Can some one provide syntax for print statement in planing function.
Thank you very much.
Regards,
Virinchi.

Hello,
what function type is it?
If it is FOX use this:
message TNNN(message_class) with A B C D.
where T is the type (I for information, W for warning and E for error). I suggest I for this.
NNN is the number of message. That is used if we are using an existing message type and we want to display a particular message. In this case 001 will do.
message_class is the message class as defined in SE91. In this particular case we do not need to define one. You can just type ZZZ and it will work, it will display the values with no message.
A, B, C & D are FOX variables. You can display up to 4 variables with each message sentence.
Hope this helps,
Miguel

How do I "see" a check function module in the debugger?

I am correctly starting a custom workflow based on an event raised by standard SAP code in transaciton QE51N.
I have to write a check function module to interrogate the event and start/not start
the workflow because the same event is raised by SAP code in transaction QA02, and I have to be sure to start the workflow only if the event is raised in QE51N, not QA02. (I also have to check some other properties of the QALS row for the inspection lot.)
I know how to code the check function module, but if I need to debug it, how do I "set-up" for seeing the check function module in the debugger?
I'm sure this is an obvious question and that I'm missing something simple.
So thanks in advance for the answer.
djh

Dear DJH,
Put a break-point in the function module and process the transaction. It will stop at runtime.
Hope this will help.
Regards,
Naveen.

JDBC to IDoc (Custom inbound function module)

Hi,
In my scenario JDBC to IDoc, I am using a custom function module to change the planned order. When I exectue the function module in WE19, it works fine and the IDoc status is also updated correctly.
But when I execute the entire interface right from JDBC, the status of the IDoc is set to 51 and the description it is giving is "No status record was passed to ALE by the application".
Can any one help me with this, where exactly is the error?

For IDOC status 51 : Inbound IDOC
In WE19, Give the IDOC number & execute ... then put the cursor on the idoc control record . then click on the Standard Inbound push button on the application tool bar.it will show show all the details like partner no,type , message type , process code & function module name ...
now put a break point in the function module .. & debug .
if u r using customised inbound function module , then click on inbound function module .. there u will get a pop screen with FM name & debugging option in both background & foreground mode...

How to debug mapping function module during delta extraction?

Hi experts,
Somehow our delta is not working properly, and i would like to debug our mapping function module. How can i debug it during a delta extraction?
Some info:
Our source system is CRM and our extractor is extracting one order document (contracts in this case). I know that when we modify a contract, a bdoc is generated and then passed throught the mapping function then the extracted data to the delta queue. I just need to debug when the bdoc is being mapped to see what's wrong with the extracted data.
Thanks in advance,
Van

Hi,
Since you are using a Function Module for the Extraction. Edit the Function Module and give "BREAK-POINT" before the loop command. Check and activate the Function Module.
Now Extract the datasource using RSA3. Now you can debug it. After checking remove the "BREAK-POINT" from the function module. Also Check and activate the same.
Regards
Jayaram M

Debuggin a Call to Remote Function Module

Hi
I have a scenario where i have a Remote Function Module in r3 which is being called synchronously by an external java application. The FM has a lot of input and output parameters and many tables. The output returned by the FM is not as expected.
Can anyone tell me how debug a Remote Function Module when a call has been made from an external application.
I am not able to get the test data sent by the external application . So when the external application gives a call to this Remote FM and if it is possibele to debug it would be great.
regards
Nilesh Taunk.

Hi Nilesh,
1) Login to SAP with the same ID with which you will calling the RFC function module from the outside system.
2) Goto transaction - se37/se38
3) Goto Utilities => Settings.
4) Select the ABAP Editor Tab.
5) Click on the Debugging tab.
6) Tick the Actv. button and give the user name with which you will be debugging the code. In this case the logged in user id.
7) Press Enter.
8) Now put an external break point inside the Function Module.
9) Load your external application (from where you want to debug the FM) once again.
The execution will stop in the FM.
Hope it helps..
Lokesh
PS: This was a simple question, but I guess the reason no one has answered your question is due to the fact that you havent rewarded points to members helping you. Also remember to close your post once it has been answered.

Debugging Outbound Function module in EDI

Hello All,
I have a query regarding debugging function module which is used for creation of outbound Idoc for Purchase Order.
We have a Z process code which is assigned to a Z function module which creates an IDOC while a PO is created in the system.
But If I set break points in the Function module, the execution does stop there.
Can any one please tell me how to debug outbound processing Functioon module while PO is created.
Regards
Arindam

Hi,
There are 2 ways to to debug an outbound idoc triggered by an output type. One way is to set the output timing to 1, and save the purchase order and then execute RSNAST00 which will take the control to the breakpoint.
You can also debug the idoc with the output timing set as 4.
Here the idoc is triggered in update mode. Hence any breakpoints you may have set before will not reflect. Hence you need to activate update debugging.
Below are the steps for the same..
1. Add the output type in purchase order.
2. Enter '/h' to activate debugging in transaction window.
3. Save purchase order.
4. The process enters debugging mode.
5. In Settings tab, select checkbox for Update Debugging.
6. Click F8.
7. The control will appear to go out and re-enter debugging mode.
8. Now from the menu bar, in breakpoints option, choose Breakpoint At Function Module option, and give the name of the function module which is processing the idoc.
9. Once breakpoint set, click F8.
10. The control will now go to the function module. You can then debug the FM.
Hope this information is helpful.

How to trigger inbound custom function module?

Hello Experts,
Could someone help me with my dilemma?
I have created a custom process code which is linked to a custom function module for processing inbound IDocs. I have tested the function module successfully and I have set up the partner profile accordingly. The IDocs are coming in but get stuck at status "64". My function module never gets triggered even though in the partner profile it is set up to be triggered immediately. Any idea what I am missing?
Thanks,
Marlin

Hi marlin ,
just go for these checks and let us know the status ..
1.Check here .
Bd51 assignment of Inbound function module. Present or not
Check here .
2.Bd67 assignment of process code to inbound function module /present or not.
3.
Check here.
In the object for the message type u need to give the BUS object as the application object.
like bus2032
4.
Now place a break-point in ur function module and run it in debugging mode ..
Now check whether this one is getting into ur function module , next check the status record of the document number .
regards,
vijay.
take an idoc , populate it from we19 and then there call the function module in debugging mode in back ground ..
we'll see if this is actually picking the Fm or not.
Message was edited by: Vijay

How to Assign a function module for customized IDOC

Hi,
I have created a customized IDOC. Can any body explain how to assign a FM for customized IDOC? Is same IDOC can be used for both Outbound and Inbound Process? In WE41 and WE42 we have to give the outbound and inbound function module name. can we give same function module? Is process code is same for both outbound and inbound process?
Valuable suggetions are appreciated.
Regards,
Ram

Hi ,
Here is the Procedure for the Inbound Idoc Funtion Module
Function Module : SE37
Message : WE81
Assign message : WE82
Assgin FM : we57
Process Code : WE42.
Assign Partner Profile - WE20,
To test the Inbound IDOC.
In WE19, Give the IDOC number & execute ... then put the cursor on the idoc control record . then click on the Standard Inbound push button on the application tool bar.it will show show all the details like partner no,type , message type , process code & function module name ...
now put a break point in the function module .. & debug .
if u r using customised inbound function module , then click on inbound function module .. there u will get a pop screen with FM name & debugging option in both background & foreground mode...
Reward Points if it is Useful.
Thanks,
Manjunath MS

Break-point in field Exit

Hi Gurus,
How can we keep a break point in filed exit . can any one help me .
I Kept break point in the functional module(field exit) but when i execute cursor is not stopping at break point.
can any one help me
thanking in advance.
Thanking you,
Raju

Hi,
The following ABAP statements are not allowed in the function modules of field exits:
BREAK-POINT, " We can not ues this statment
CALL SCREEN, CALL DIALOG, CALL TRANSACTION, SUBMIT,
COMMIT WORK, ROLLBACK WORK,
COMMUNICATION RECEIVE,
EXIT FROM STEP-LOOP,
MESSAGE I, MESSAGE W.
Field exits have to be tested in isolation in the development environment. To analyze problems that occur only in the screen environment, the relevant variables can be written to the file system using TRANSFER... and can be analyzed there.
<b>Conclusion is We can not debug the Field Exits</b>
Regards
Sudheer

TC: VTRC - Set up Meta Data (Customize function module)

For few business requirements we have decided to customize the standard function module in "meta data setup" in VTRC transaction. During the analysis i have put the break point in the function module. System is not stopping at that point when i am executing transactions in foreground.
I came to know that we have to activate few settings, so that system will stop at that break point level. Could any body let me know what are these settings?
Thanks & Regards

hi
which include you are trying to put breakpoint.
are you getting the message breakpoint set or not?
are you executing the transaction in same session/window in which breakpoint is set?
Regards
Jitesh

Break Point is not working on Web UI

Hi guys,
i have a problem with Break Points in combination with the Web UI:
After setting a Break Point in a Function Modul or Method and starting and working with the Web UI the Break Point will not reached. So the Debugger does not open. When i activate the Debugging with the Transaction Code SICF the Break Point is working normaly and the Debugger opens. But ater 30 min the Break Point will not work again. After activating the Debugger over SICF again very thing is ok. Thus i have to activate the Debugger with SICF 10 times per day.
Could somebody tell me how to fix this Problem? I would like to activate Debugging permanently.
Thank you very much. And i am sorry for my bad english ^^ I hope you understand my problem. Don't hesitate to ask for a better understanding. If you like to do it, don't hesitate to correct my gramma and spelling xD, because i need better english skills.

Hi,
Try this..
Activate breakpoints for http debugging..go inside component workbench trxn for any bsp component.. And select activate from the menu option debugging.. This will activate http breakpoints and it will stop in get/setter etc.
i believe this is required to do only once when you login to the system..
Hope this helps..
Cheers,
Sumit Mittal

Break Point in BTE function module

Similar Messages

Maybe you are looking for