Break Point is not working on Web UI

Hi guys,
i have a problem with Break Points in combination with the Web UI:
After setting a Break Point in a Function Modul or Method and starting and working with the Web UI the Break Point will not reached. So the Debugger does not open. When i activate the Debugging with the Transaction Code SICF the Break Point is working normaly and the Debugger opens. But ater 30 min the Break Point will not work again. After activating the Debugger over SICF again very thing is ok. Thus i have to activate the Debugger with SICF 10 times per day.
Could somebody tell me how to fix this Problem? I would like to activate Debugging permanently.
Thank you very much. And i am sorry for my bad english ^^ I hope you understand my problem. Don't hesitate to ask for a better understanding. If you like to do it, don't hesitate to correct my gramma and spelling xD, because i need better english skills.

Hi,
Try this..
Activate breakpoints for http debugging..go inside component workbench trxn for any bsp component.. And select activate from the menu option debugging.. This will activate http breakpoints and it will stop in get/setter etc.
i believe this is required to do only once when you login to the system..
Hope this helps..
Cheers,
Sumit Mittal

Similar Messages

Break point does not work

Hi Friends,
I have a Smartform and a print program. I have made some changes to the Smartform and then I am trying to pass some data from Print Program to the Smart form.
But the data does not pass. When I try to debug the debugger does not start.
It directly creates the Spool. I have kept break points in the Print Program when I Call the Function Module.
I have hardcoded the break points in the smart form.
BREAK-POINT.....and also break ACCCC.(User Name).
It does not stop, the transaction that I use is VG02.
VG02>Enter the Group No>Click on Output>Enter the Message type>Select and click on Communication-->
I give LOCL --> and Come back and hit the save button.
After that when I look into spool it creates a spool.
Can any one suggest me where I am doing wrong..
Thanks,
chaithanya

Thanks for your replies.......
I have re-executed the transaction. But it did not stop at the break point.
Can any one explain me about the UPDATE task. How to check it. I have activated the code and the Smartform.
I made several break points in the print program, but I don't knw why it does not stop.
When I execute the Smartform. It goes to SE37 and when I execute it(F8). Add some data in the internal table and run it. It stops at the break point where I wrote break AXXX.
Thanks & Regards,
Chaithanya.

"Execute" is not working in web reports

Friends,
" Execute" link is not working in web my report. And also the selection screen is blank for style sheets. Do you have any idea about the cause?
Joe

Also check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
Hope it Helps
Chetan
@CP..

LOVs not working in Webi Report for SAP BO 4.1 SP 2 Patch 3

Hello ,
I have developed reports and universes in SAP BO 4.0 SP 5 and i have migrated those reports to higher version of BO which is 4.1 SP2 Patch 3.
My universe is working fine with LOVs but when i run the webi report , the LOVs arent working.
have anyone facing the same issue. any idea why the LOVs arent working on higher version.?

Hi Victor,
The List of values we will assign in universe in order to get filtered data works on universe query panel
but the same objects when i am using in report(webi report) , the List of values are not working .i.e
they are not getting displayed in webi report.
for ex: i have country object having country names as LOVs and state objects having state names as LOVs . Now when i select Country value , the LOVs of state objects should get filtered and shows only states which belongs to country .
the above logic is not working in webi report , i am only able to select country and when i go for state, the state names do not get filtered.
please let me know why this is happening in the SP2 patch 3 version and its working fine for SP2 , but the chrome issue gets solved after applying patch 3 and not if we only upgrade to SP2.
the webi reports are not working in chrome browser if we using SAP B04.1 SP2 and lower version
but the LOVs are not working in SAP BO 4.1 SP 2 patch 1, 2,3.
kindly help me with the issue

Javascript does not work in web browser

Hello friends.
I have a problem with javascript in my Captivate project.
This script only works in preview in Captivate, but does not work in web browser (IE 9, Mozilla, Chrome).
Anybody knows why?
Thank you for your answers.

Common JS interface
That is the official documentation for JS in Captivate 8. For more information, have a look at Jim Leichliter's website: CaptivateDev.com - eLearning Development with Adobe Captivate

Mouse pointer is not working correctly

I have a MacBook Pro and the pointer is not working correctly. It does not work smoothly and it is hard to get it to go where I need it to go.

Hello billm46,
Welcome to the Apple Support Communities!
It sounds like the trackpad on your MacBook Pro is displaying jumpy behavior. In this situation, I would recommend reading over and working through the suggested steps in the attached article.
Trackpad or Magic Trackpad is jumpy or erratic - Apple Support
Have a great day,
Joe

I bought my macbook pro this morning. When I turned it on it led me through set up with voice over. I finally quit VO but my pointer is not working. It moves but does not open anything. Can anyone help?

I bought my macbook pro this morning. When I turned it on it led me through set up with voice over. I finally quit VO but my pointer is not working. It moves but does not open anything. Can anyone help?

ladislavfromcygnet wrote:
Thank you Shootist007. I cannot do even Update now. I probably should have spent the same amount of money on a new IMac!
No not really. If this is a brand new Macbook Pro take it back for a refund. Apple has a 14 day No Questions Asked return policy for Full refund.
Take it back, get the Full Refund (DO NOT LET THEM TRY TO FIX IT. YOU BOUGHT A NEW COMPUTER NOT ONE THAT HAS BEEN WORKED ON OR NEEDS TO BE FIXED) and then decide whether to buy another Macbook Pro or the iMac. Or you could return it, get the Full refund and buy some other brand computer.

Why Vanishing Point is not working in PS CS3 as it was showing in the tutorial Disk?

Vanishing Point is not working in PS CS3. I was trying 10s of time or may be I am not working right. But whatever it says and showing in the Tutorial Vedio, not happening that easy. Or it does not cover in the Photoshop CS3. Because that's the way its look like now. does anybody know how can we make it work possible?
Thank You.
jeevan.

Here is a copy of my expressions and a copy of my data. The expressions match up going from left to right
Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4"))
sum(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
count(Code.CalcPTD2(Lookupset(FORMAT(Fields!REALDATE.Value,"Long Date"),FORMAT(Fields!CallbackDate.Value,"Long Date"),Fields!DailyHours.Value,"DataSet4")))
PUBLIC SHARED FUNCTION CalcPTD2(LookupArray AS OBJECT) AS INTEGER
     DIM i,Total AS INTEGER
     Total = 0
     FOR i = 0 to UBOUND(LookupArray)
           Total = Total + CINT(LookupArray(i))
     NEXT i
NumberTimes =   NumberTimes +1
RETURN Total
END FUNCTION

BI Publisher not working with Web Cache

BI Publisher not working with Web Cache
I'm trying to enable BI Publisher to run from the internet. I have Web Cache (AS10g rel 2) in an internet DMZ, trying to work with BI Publisher running on a AS10g rel 3 server in a application DMZ. BI Publisher won't allow Web Cache to hide the URL after login. It tries to use the application server name as a URL and gets lost, since this is not resolvable from the internet. We have Content DB, other J2EE application installed in this same configuration, and it works fine.
This is duty managed as of today. They required an enhancement request, which I submitted. SR 6696835.993 -

Currently an enhancement - it was logged as that but IMHO its a bug as other Oracle products work OK - it kinda depends on whether its an ORacle strd to work with webcache or not. Suffice to say, we are investigating the issue and will update the er/bug soon.
Tim

Break points are not triggering in RFC from portal application

Helllo,
I am running Biller Direct application from portal, which is triggering a standard SAP RFC FM back end, am trying to debug my execution from portal, for this i put the External Break point, Session break-poiint at the beginning of this SAP RFC FM, but, its not stoppping at ll, here the user is a Web user, not dialog user.
How can i stop my execution in this SAP RFC FM to check how the structures are populated?
Thank you

Hi Raju,
Please try the below way and check if it works.
Open the RFC in R/3 i.e.
SE37 -> give FM NAME -> DISPLAY.
Click on UTILITIES -> SETTINGS -> CLICK THE TAB debugging.
In the screen against the field users : give the value 'WEBLOGIN'.
Uncheck the FLAG 'IP MATCHING'.
And at the bottom check the check box against the field
'Session Break Point Activate Immediately'.
Save these settings.
Then go to the line at which you want to debug the code and put an external break point over there.
But, please take care of one thing as we are giving it as a WEBLOGIN, when ever some logs in, it will reach the brteak point and stop there. We have to click F8 to continue. Or else, the portal will be hanged for them.
Thanks & regards,
Y Gautham

TH_DELETE_MODE not working in Web GUI after EHP7 upgrade

Hi
After upgrading to EHP7 the function module TH_DELETE_MODE is not working in the Web GUI. If I start the TH_DELETE_MODE in SE37 with the default paramter "1-" I'll get the HTTP error code 500. We use the function module for our webdynpro to logout but it is not working anymore.
Any idea or recommendation?
Thank you and best regards, Ronny

Your server-side include has all of the HTML on it for a full
page.
Strip everything from it except the stuff you want to
include.
http://www.fordwebs.com/mx-asp/ssi-index.asp
Ken Ford
Adobe Community Expert
Fordwebs, LLC
http://www.fordwebs.com
"ValsGalore" <[email protected]> wrote in
message news:f019c0$in1$[email protected]..
>I just recently began work on an existing Web site, which
includes the file
> nav.asp on every page. After I made some changes to one
of the pages (it's
> temporarily located at
http://www.enviroglasproducts.com/reps5.asp),
I found
> that when I closed it and reopened it in Dreamweaver, I
could no longer see the
> page in preview mode.
>
> It shows my </head> tag highlighted in yellow, but
won't let me click on it.
> In code view, the <table> tag, which is the first
tag after <body>, is "marked
> as invalid because it's an overlapping or unclosed tag."
I've been over this
> document several times, but I cannot find any errors in
the construction of the
> table.
>
> If I copy all the content into an identical page, it
will look fine in
> Dreamweaver until I close it and reopen it, and then I
will have the same
> problem.
>
> Oddly, when I remove the  from the second cell
> of the main table, then everything looks fine.
>
> Other points worth mentioning are that (until I delete
it), nav.asp shows up
> in its proper location in reps5.asp, but nothing else
does except for the image
> that appears right above it.
>
> In other pages on the site, the included nav.asp does
not show up in
> Dreamweaver at all.
>
> Can anyone think of why this is happening?
>
> Thanks!
>

ForAll not working in webi

Hi All,
Deski Formula: =(<Discrepancy Count(S# of DCF Resolved)>+<Discrepancy Count(S# of DCF UnResolved - All)>)/Sum(<Discrepancy Count(S# of DCF Resolved)>+<Discrepancy Count(S# of DCF UnResolved - All)>) ForAll (<Site(S# of Page Saved Imcomplete)> , <Site Country> ,<Inv Name>)
in this formula,the site country and inv name are detail object
if i use the same formula in webi the values are not matching with deski.i made detail to dimension objects but not working. what are the workaround need to do to achieve the same in webi?help me pls urgent requirement

can you change the opendoc syntax to point at a one of the specific server and see if it works? also how is the load balance configured - does it use sticky cookies? perhaps the balancer is not maintaining the server session details

Currency conversion not working in web templates after migration to 7.0

Hi Gurus,
I am experiencing an interesting issue in BI7. I have my web-template reports build on one or two queries. When I execute the queries from RSRT I have all the amounts properly converted to USD (there is a bex variable defined on the query level with USD as default). However, when executed from web-browser the conversions does not work when the report opens. Now, when I open the "cur. translation" option from KF popup menu and choose the same values I chose on the variable screen - everything works fine.
Have you experienced similar issue(s)? Please share your experience and kindly avoid pasting links for documentation - these I have already reviewed and it's pointless.
Thank you, KAT

Hi Nitin,
You may wish to take a look at below for few insights -
OSS notes 328181 and 762951 as a prerequisites.
Failure to follow the instructions in those notes may probably result in data loss.
https://websmp207.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002662832005E
Re: Delta queus during upgrade
Assign points if this is helpful.
Regards,
Anil

Swing components in applet not working in web browser

Hi Guys,
I've created an applet which makes use of some swing components, but unfortunately, not all of them function properly in my web browser (internet explorer or Mozilla Firefox). Its mainly the buttons; the last buttons works and displays the correct file within the broswer, but the first 5 buttons do not work...
any help please on how I can sort this problem out?
Heres the code for my applet:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.applet.*;
public class MainAppWindow extends JApplet
int gapBetweenButtons = 5;
final JPanel displayPanel = new JPanel(new BorderLayout());
public void init()
   //Panel for overall display in applet window.
   JPanel mainPanel = new JPanel(new BorderLayout());
   mainPanel.add(new JLabel(new ImageIcon(getClass().getResource("images/smalllogo2.gif"))),BorderLayout.NORTH);
   //sub mainPanel which holds all mainPanels together.
   JPanel holdingPanel = new JPanel(new BorderLayout());
   //Panel for displaying all slide show and applications in.
   displayPanel.setBackground(Color.white);
   displayPanel.add(new JLabel(new ImageIcon(getClass().getResource("images/IntroPage.jpg"))),BorderLayout.CENTER);
   displayPanel.setPreferredSize(new Dimension(590,400));
   JPanel buttonPanel = new JPanel(new GridLayout(6,1,0,gapBetweenButtons));
   buttonPanel.setBackground(Color.white);
   JButton button1 = new JButton("User guide");
   button1.addActionListener(
     new ActionListener() {
          public void actionPerformed(ActionEvent e)
               if(displayPanel.getComponents().length > 0)displayPanel.removeAll(); // If there are any components in the mainPanel, remove them and then add label
               displayPanel.setBackground(Color.white);
               displayPanel.add(new JLabel(new ImageIcon("images/UserGuide.jpg")));
               displayPanel.revalidate(); // Validates displayPanel to allow changes to occur onto it, allowing to add different number images/applicaions to it.
   JButton button2 = new JButton("What is a Stack?");
   button2.addActionListener(
   new ActionListener() {
           public void actionPerformed(ActionEvent e)
               if(displayPanel.getComponents().length > 0)displayPanel.removeAll();
               displayPanel.setBackground(Color.white);
               displayPanel.add(new JLabel(new ImageIcon("images/WhatIsAStack.jpg")));
               displayPanel.revalidate();
   JButton button3 = new JButton("STACK(ADT)");
   button3.addActionListener(
   new ActionListener() {
         public void actionPerformed(ActionEvent e)
               if(displayPanel.getComponents().length > 0)displayPanel.removeAll();
               displayPanel.setBackground(Color.white);
               displayPanel.add(new JLabel(new ImageIcon("images/StackADT.jpg")));
               displayPanel.revalidate();
   JButton button4 = new JButton("Stacks in the Real World");
   button4.addActionListener(
   new ActionListener() {
         public void actionPerformed(ActionEvent e)
               if(displayPanel.getComponents().length > 0)displayPanel.removeAll();
               displayPanel.setBackground(Color.white);
               displayPanel.add(new JLabel(new ImageIcon("images/StacksInTheRealWorld.jpg")));
               displayPanel.revalidate();
   JButton button5 = new JButton("DEMONSTRATION");
   button5.addActionListener(
   new ActionListener() {
         public void actionPerformed(ActionEvent e)
             if(displayPanel.getComponents().length > 0)displayPanel.removeAll();
             Demonstration app = new Demonstration();
             JPanel appPanel = app.createComponents();//gets the created components from Demonstration application.
             appPanel.setBackground(Color.pink);
           displayPanel.add(appPanel);
           displayPanel.revalidate();
   JButton button6 = new JButton("Towers Of Hanoi");
   button6.addActionListener(
   new ActionListener() {
         public void actionPerformed(ActionEvent e)
                 if(displayPanel.getComponents().length > 0)displayPanel.removeAll();
                 TowerOfHanoi app = new TowerOfHanoi();
                 JPanel appPanel = app.createComponents();//gets the created components from Towers of Hanoi
                 JPanel mainPanel = new JPanel();//panel used to centralise the application in center
                 mainPanel.add(appPanel);
                 mainPanel.setBackground(Color.pink); //sets mainPanel's background color for 'Towers Of Hanoi'
                 displayPanel.add(mainPanel);
                 displayPanel.revalidate();
   //adding buttons to the buttonPanel.
   buttonPanel.add(button1);
   buttonPanel.add(button2);
   buttonPanel.add(button3);
   buttonPanel.add(button4);
   buttonPanel.add(button5);
   buttonPanel.add(button6);
   JPanel p = new JPanel(); // Used so that the buttons maintain their default shape
   p.setBackground(Color.white);
   p.add(buttonPanel);
   holdingPanel.add(p,BorderLayout.WEST);
   holdingPanel.add(displayPanel,BorderLayout.CENTER);
   //Positioning of holdingPanel in mainPanel.
   mainPanel.add(holdingPanel,BorderLayout.CENTER);
   //indent mainPanel so that its not touching the applet window frame.
   mainPanel.setBorder(BorderFactory.createEmptyBorder(10,20,10,20));
   mainPanel.setBackground(Color.white);
   mainPanel.setPreferredSize(new Dimension(850,600)); //size of applet window
   mainPanel.setOpaque(false); // Needed for Applet
   this.setContentPane(mainPanel);
}

Thanks for the response. I don't quite understand what you're talking about though. I have, in my humble knowledge, done nothing with packages. I have put the applet class (WiaRekenToolActiz.class is the applet class) in the jar file wia_actiz_archive.jar. From what I read on the tutorial, java looks for the applet class in all the jar files specified. Since I put my CODEBASE as the main url, I thought it baiscally didn't matter where you out the html file.
I shall include the complete html page complete with applet tag to perhaps illuminate a bit more what I mean...
<html>
<head>
<title>Wia Rekenmodule hello!</title>
</head>
<body bgcolor="#C0C0C0">
<applet
CODEBASE= "http://www.creativemathsolutions.nl/test"
ARCHIVE= "Actiz/wia_actiz_archive.jar, Generic/wia_archive.jar"
CODE="WiaRekenToolActiz.class"
WIDTH=915 HEIGHT=555
>
<PARAM NAME = naam VALUE = "Piet Janssen">
<PARAM NAME = gebdag VALUE = "01">
<PARAM NAME = gebmaand VALUE = "06">
<PARAM NAME = gebjaar VALUE = "1970">
<PARAM NAME = geslacht VALUE = "man">
<PARAM NAME = dienstjaren VALUE = "10">
<PARAM NAME = salaris VALUE = "56500">
<PARAM NAME = deeltijdpercentage VALUE = "100">
<PARAM NAME = accountnaam VALUE = "Zorginstelling 'De Zonnebloem'">
</applet>
</body>
</html>

Right click is not working in Web dynpro explorer

Hi All,
I have SAP net weaver developer studio 2.0.9.
when i right click on web dynpro components, to create a component, the context menu is not coming, right click is not working.
though right click works fine in diagram view and outline view.
Please suggest what might have happened? and how to get back the settings.
Cheers,
Srini.

Hello Srinivas,
Try closing and opening NWDS. If you still see the same problem, simple solution for this is, Just Change Workspace to new folder.
Changing workspace - Window -> Workbench -> workspace -> give new path.
Close nwds and open it again. It should solve the problem.
Thanks,
Sridhar

Break Point is not working on Web UI

Similar Messages

Maybe you are looking for