Break point in enhancement
hi all,
How do we set a break point in a enhancement.
When i try to create a break point I am getting a message
'THE POSITION OF THE BREAK POINT CANNOT BE DETERMINED'
I know that the code in the enhancement point is in a include program.
but how do i know the name of that program?
can i set the break point in the include program?
Thank you,
Krishna dev
>
Suresh Datti wrote:
> I'm on ECC6 (NW07 SP14) & so far did not have any problems setting up either session or external breakpoints.
>
> ~Suresh
I am on ECC6.0 and same release, i am also able to setting the break points both session and external. But not on ENHANCEMENT SPOTS.
If there is any include in the implementation then i can go to that include program and able to see the break point. But not on ENHANCEMENT or inbetween ENHANCEMENT and ENDENHANCEMENT.
Do you know why..? I tried even before. I thought there is some problem..
Similar Messages
-
Unable to set a break point in Enhancement part
Hi,
Hi,
I have two servers one is quality and the other is upper lanscape system. I am able to set break point in the enhancement part in Upper landscape system. But in quality system its throwing some error 'The position of the break point cannot be determined'.
Edited by: Delphi on Feb 23, 2012 8:17 AMThis may be due to SWITCH POSITION property in Enhancement.
Go to SE19 -> Edit Implementation -> New BAdI -> Display.
Go to properties tab of your enhancement and check whether SWITCH POSITION is OFF or not.
If its OFF, you cannot put breakpoint.
NOTE: Its state can be changed, but its impact is at Package level
Please find the detailed link:
http://help.sap.com/saphelp_nw04s/helpdata/en/af/e8b540afc87c2ae10000000a155106/frameset.htm
Edited by: Ajoy Chakraborty on Feb 23, 2012 1:15 PM -
How to set a Break point in Comp Workbench
Hello Guys,
I have a Z** Enhancement set ( t-code: bsp_wd_cmpwb) and i have a view & a Z**IMPLclass for it.
I need a way to set a break point in the Z*IMPLclass in t-code: bsp_wd_cmpwb.
I have my code in this Z* impl class and making some changes for a field. I want to be able to debug this field in this Z**class
when i launch the Web UI using CRM_UI.
Can someone help me on this?
Thanks
RickyHi,
you should set an External Breakpoint (Ctrlshiftf9 in CRM 7.0) in the point you want to debug in bsp_wd_cmpwb. Then debug opens in the GUI as soon as you reach that breakpoint in the Web UI.
Regards,
Laura. -
Break points are not triggering in RFC from portal application
Helllo,
I am running Biller Direct application from portal, which is triggering a standard SAP RFC FM back end, am trying to debug my execution from portal, for this i put the External Break point, Session break-poiint at the beginning of this SAP RFC FM, but, its not stoppping at ll, here the user is a Web user, not dialog user.
How can i stop my execution in this SAP RFC FM to check how the structures are populated?
Thank youHi Raju,
Please try the below way and check if it works.
Open the RFC in R/3 i.e.
SE37 -> give FM NAME -> DISPLAY.
Click on UTILITIES -> SETTINGS -> CLICK THE TAB debugging.
In the screen against the field users : give the value 'WEBLOGIN'.
Uncheck the FLAG 'IP MATCHING'.
And at the bottom check the check box against the field
'Session Break Point Activate Immediately'.
Save these settings.
Then go to the line at which you want to debug the code and put an external break point over there.
But, please take care of one thing as we are giving it as a WEBLOGIN, when ever some logs in, it will reach the brteak point and stop there. We have to click F8 to continue. Or else, the portal will be hanged for them.
Thanks & regards,
Y Gautham -
BI-IP: Formula FOX - Debug & Break-Point
Hello,
BI-IP compiles the command "BREAK-POINT" in the Formula FOX source code. But it does not debug when the planning function is "executed with trace" (sequences).
Is there any possibility in BI-IP to debug the FOX code?
regards
Eckhard LewinHi JW,
when use execute report RSPLS_PLSEQ_EXECUTE, key in your planning sequence. Then hit enter! You will see that the possible selection variants will change. If you do not hit enter in between, you won't see your variant.
gr
Dries -
DL Break Point Issue - Please Help.
Hello,
I use to work in DVDSP when you could only do one layer and even then I knew just enough to get the job done. Now I have a program that is 6.6 gigs total size (according to DVDSP) and I can't get this thing to find the break point. I have read through most of the manual regarding this issue and have read many posts - first I have to ask is why is this so difficult?
Here are the issues in detail and I ask that if you give input please guide me like I have limited knowledge in this.
I am using DVDSP 4.1.0 on a G5 Dual 1.8 OS is 10.4.8 with a Pioneer DVR 111D. I have 4 'tracks' all coming off one main menu...no sub menu's - so I have the one main and four buttons that go directly to the videos. When I try to 'burn' the DVD I get this error 'Formatting was not successful. A suitable marker could not be found in the required layer break range. See the DVD Studio Pro User's Manual for more information.' The size of each track is as follows:
Track One: The Main footage is 4.0 Gig (this is the one I am trying to set the break point because the limit is 3.9 Gig)
Track Two: is 1.7 Gig
Track Three: 606 Meg
Track Four: 216 Meg
I have tried 'Automatic' without luck.
I have tried to place a few markers approximately 3/4 of the way through Track One the marker that I place is Green and in the Inspector window when I click on that marker I see the 'Marker Function' and then the button to select Dual-Layer Break Point and I select that only. However when I click something else and then come back to Marker the Dual Layer Break Point is not selected!
I then have gone into the 'Disc/Volume' and tried to select the 'Break Point' and chose Track One but still nothing. I have read in the forums about building the disc and then going into the TS folders and blah blah blah to get this done but that is above my head and I don't understand it.
I just need to get this video done. It is for a family who's 17 daughter was tragically killed and will be a fund raiser for them...I need to get this done. So if any of you are willing to help that would be SO appreciated AND if any of you would be so kind to walk me through this over the phone THAT WOULD BE GREAT! Just email me at [email protected] and I will email you my number. I know this is a tad different but I don't have much time left to get this done because of my 'real job' and again, I need to get this done!Hi csiaudio,
Build the project (AltAppleC). Then in the format window (Apple+F), Disc/Volume tab you'll be able to see the available break point markers. If they are all greyed out then you do not have one in the project.
Add Cell markers in places that you think would be ok as the layer switch. You do this by adding a chapter marker and then in the property inspector un-checking the type Chapter. This will now be a marker that can be used as a dual layer break point but is not a chapter marker.
You'll need to re-build the project and check the format window options again,
-Jake -
Break Points while remote debugging not working in Eclipse
I have set up my tomcat to listen for debugger connections on the default pot 8000. Now when I set break points in the code, it does not show the execution stop at that particular line.
Now why would that be? Am I missing somethiing?
I have built the files with debugging on.
thanks
Mhttp://kaustavdm.in/2014/08/connect-firefox-os-spreadtrum-device-adb.html
check this out, it should fix all your problems ! -
Dump while setting a break point in ECC 6.0
Dear Experts,
In ECC 6.0, when I try to put a break point in the program to stop the control there. I am not able to do so, it is going to dump. The dump message is also not very clear. Do anyone of you are facing the same problem. Any idea why is this happening and how do I fix it.
Can it be due to the improper installation? Please respond.First of all thanks to Mickey, Nitin, Anki, Sujit, Red, Madhu, Vibin for the quick response...To be honest I did not expect such a response as a new member to the SDN community...I am sorry I could not mention the detail about the dump initially...Here is the detailed description..
Issue: In ECC 6.0, when I write a simple ABAP program (e.g. 'Hello World' program). When I try to keep the cursor on any abap statement and click on the 'session break point' icon in the tool bar to set the break point, i get a status message 'Compling SAPLBREA in separate task and finally i get the dump.
Dump Detail :
Runtime Errors: DBIF_REPO_SQL_ERROR
Short Text : SQL error 1115 occurred when accessing program 'LNAVIDAT' part "SRC".
Program: SAPLBREA
Include: LBREATOP
Row: 41
There is a an include being called at line no 41, which is "Include LNAVIDAT".
Now when I click on the 'debugger' icon in the dump...It points to a functional module "RS_SET_BREAKPOINT"
Also, while double clicking on this include to see the code within, it issues an error message saying "SQL error occurred when accessing the table TRDIR".
Or
While trying to display the code of the include LNAVIDAT in se38 to see what is wrong with that i get another dump and this time it points to be SELECT query in the dump which is:
SELECT SINGLE * from PROGDIR WHERE name = rs38m-programm
and state = active.
Thereafter, i keep getting dumps when i try to go to any T.codes (e.g. se11, se38 etc.). until i log off and log in again. Hope this helps you guys understanding the problem. Being new to SAP, I have no clue why is this happening and how to fix it. Thanks in Advance. -
How to put a break point while creating a travel request in ess
Hi to all experts,
My requirement is to put a break point in the badi while creating a travel request in Ess.
The badi name is TRIP_WEB_CHECK
i tried both external and session bps
i also tried this.
break uname
break-point
and it is i check whether is triggering by throwing dump like ( divide by zero) it is triggering
how to stop it while triggeringHi Bhanu,
Please go through these links:
How to debug abap code in update rules...routine?
debug abap routine in infopackage
Debugging of global transfer and update routine
Debugging Start/Transfer routine
And have a look at this demo video to know how to set up break points and how to debug an ABAP program in NW2004s:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9cbb7716-0a01-0010-58b1-a2ddd8361ac0?prtmode=navigate
Hope it helps..
Cheers,
Habeeb -
External break point in sap r/3 system
i want to set external debugging to rfc in r/3
i tried to set it
its getting set
but when i call rfc from external system(webdynpro)
its not gng to that break point i.e its not linking to that break point
what could be the reason
and how we can set external breakpoint
are there any setting we need to do in r/3 so that break points will work
Regards,
VaniHi Vani,
First u have set ur Server to Debug mode...then only u can debug the code...
1. Select "Server0" from J2EE engine (To get this view navigate thru Window--> Show View --> J2EE Engine)
2. Make a right click on "Server0" and choose "Enabling Debugging of Process"
3. Now, Navigate to Run --> Debug --> Select your Project as "Webdynpro Application" and click "new" button
4. Now give some name and Click BROWSE to select ur project and then click APPLY and DEBUG
Or
if u use 2004s, then u can do the settings in Portal itself...which gives u more clear information... follow the link
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0cb32c5-36a7-2910-2c9b-ba4a5bbdbb56">WebDynpro Java Debug Configurator</a>
Hope it helps...
Regards / Guru -
VS 2010 Silverlight project upgraded to VS 2013 - not hitting break point.
dear Readers,
thank you for taking the time to read this posting.
we had developed a SL project using VS 2010 and it was successfully upgraded to vs 2013. after a couple of hiccups, the application compiled and ran successfully. the SL app is still in .net framework 4.0.
due to some changes, we wanted to debug the application. Even after marking a couple of break points, we found that vs 2013 did not hit the breakpoints when we ran the app with F5.
We tried the following and it still would not hit the breakpoint:
1. deleted the /bin and /obj directories in SL and .Web projects.
2. deleted .xap file and /bin /obj directories.
We tried attaching/detaching the sl process in Firefox. IE, and chrome - no luck.
any suggestions will be appreciated.
regards
ravi.
Sr GIS App Developer Dallas Fort Worth area, TXHi,
Please check the upgrade report details.
Besides, below articles will help you when you upgarde your silverlight application.
https://msdn.microsoft.com/en-us/library/hh397894(v=VS.95).aspx
https://social.msdn.microsoft.com/Forums/silverlight/en-US/475d7dca-eebf-4d50-87f8-957f6415fb63/how-to-upgrade-a-silverlight-4-application-to-silverlight-5?forum=silverlightgen
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Break Point in Webdynpro JAVA and SAP
Good Morning.
I am creating a development for web dynpro Java using Function Module RFC in ABAP.
I want know how can put a break point in the system SAP ERP (Backend) and run an application in web dynpro java?
I did this steps:
1.) SE37--->name RFC
2) button Display
3) Set/Delete external Break point.
4) In the SAP Netweaver Developer Studio >Name of project>Webdynpro>Applications>Name Appplication-->deploy new archive and run.
But this not stop.
The question is :
How can do this?
Kind RegardsHi,
Refer this article: [Debugging ABAP Code from within Web Dynpro Application|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/0e9a9d90-0201-0010-478e-991dbea73a30&overridelayout=true].
I hope it helps.
Regards
Arjun -
Break-point in ALV-GRID OO if standard-button &PRINT_BACK is pressed.
Hi,
is it possible to set a break-point in Button '&PRINT_BACK'?
I will use it to test if i can use:
CALL METHOD I_ALV_GRID->GET_FRONTEND_PRINT
IMPORTING
ES_PRINT = GS_PRNT.
and
CALL METHOD I_ALV_GRID->SET_FRONTEND_PRINT
EXPORTING
IS_PRINT = GS_PRNT.
Regards, DieterHi,
Please check links,
ALV Grid Control - Dropwdown / Checkbox
Question about triggering event for ALV dropdown
Regards,
Hema.
Reward points if it is useful. -
Export data in Excel file - Debug and Break Point
In the program RFUMSV00 the data been displayed on the screen with the function REUSE_ALV_LIST_DISPLAY.
With "Cntrl + Shift + F9" I exported the list of data in an Excel file.
How can I see, with Debug, where the program RFUMSV00 passed the data to Excel File? I can indicate the point, In the program, where I need to set the break point?
Thanks,
SerenaHi,
This download functionality has nothing to have with program RFUMSV00. It is actually processed by REUSE_ALV_LIST_DISPLAY fm, which calls fm LIST_COMMAND which finally calls fm LIST_DOWNLOAD, where you will actually find the downloading part (in fact in another fm, DOWNLOAD_LIST)...
to resume: REUSE_ALV_LIST_DISPLAY->LIST_COMMAND->LIST_DOWNLOAD->DOWNLOAD_LIST
so I would put the break-point in the last one..
Kr,
Manu.
correction: I made a mistake, the break-point should be set in LIST_DOWNLOAD...where you will find the call to fm LIST_CONVERT_TO_DAT which is responsible of the download...
Edited by: Manu D'Haeyer on Dec 9, 2011 1:46 PM -
Is there a way to find all the break points that has been set in Jdeveloper
I set break points here and there based on what i am debugging. was wondering if there is a way to find out all the break points I have set, like a summary view or something.
ThanksHello,
You can check View --> Debugger --> Breakpoints.
Regards,
Simon
Maybe you are looking for
-
I'm relatively new to BW...I've been supporting it internally for our company for the last year+, but I come from a .NET background. My questions are in regards to the reporting tools that people use at different implementations. We use the BEx Ana
-
Problems with flashbuttons in IE
When I load my site in IE and press directly one of the flash buttons it says: The page does not exist. When I go to a normal link and then back to one of the buttons it works ok??? Please help me, the site does work without problems in Safari, IE fo
-
Multiple signatures - only ever displays one
I have multiple email accounts - with, understandably, the need for multiple signatures. When I hit reply from (let's call it) Account 1, the Account 1 signature is used. When I hit reply from Account 2, the Account 1 signature is used! It's pretty a
-
My speeds are superquick on all websites except for Chase online banking. It is barely even functional. I checked with Chase and they said they have had similar reports but that it must be with the browser. This is probably true since it works fine o
-
hai any body tell me what is the purpose of maex table(legal control). what are the things we have to up load. thank you regards geetha