Breakpoint was not set due to a generation error
Hi,
I have this problem, there is a transaction that doesnt execute in the productive environment, BUT the transaction can be executed in quality and DEV environment.
So when I set a breakpoint (in productive), this message come up Breakpoint was not set due to a generation error for ZCO_AllTheJazz_DETAIL (the program).
The Question is: WHAT does it means and HOW can I fix it?
Any suggestions are welcome
Ubadawan
Ok sorry max I didn't think that the name was important.
The name is ZCO_OBJECT_CO_DETAIL
The message number is ED057 and its main program is SAPLSHL2.
Im going to explain some more, when I execute the transaction a screen with the syntax error (like you said Rob) said:
The following syntax error occurred in the program ZCO_OBJECT_CO_DETEAIL. "Field 'G_GLOBAL_OBJECT-HIEART' is unknown"
The thing is, I checked and is declared on
INCLUDE ZCO_OBJECT_CO_DETAIL_top.
Like this -> data: G_GLOBAL_OBJECT type kkb_global_object.
This means that it is declared.
Im starting to think: this two errors are related.
Similar Messages
-
JSF RI 1.1_01: UIInput component value was not set during render response
I've just started to learn JSF, read corresponding chapters in J2EE guide and spec and tried to play little bit with JSF RI 1.1_01. I found very strange (at least for me) behaviour of regular input component (corresponds to inputText tag).
I have very simple example form (contains "select one", input component and command button). Corresponding backing bean has request scope. I set breakpoints in backing bean getters and during debug found:
1. On initial request both getters were called during rendering phase.
2. On form submit request getter for property bound to input component was called again (this looks strange for me) but getter for property bound to select box was not called (it looks as I've expected). This strange call occurs during validation phase. As far as I understand it was the following flow:
a) During initial request rendering response input box value wwas not stored in component state (I even may suggest that it was not set on component, just corresponding HTML tag with initial value was rendered).
b) On submit form submitted string value of input component was decoded from request parameters but local value was set to null (see above).
c) During validation phase submitted value was successfully converted and validated.
d) Then implementation had to detect component value change and called getValue() in order to obtain old value.
e) Implementation of getValue() first looked for local value field - it is null, then it should request for bound value from model.
I tried different ways to store state (client or server) but it was the same. Sadly MyFaces 1.1.1 implementation did even worse - local value of select was also null during first postback.
I wonder why it was implemented this way...
Thank youI've just started to learn JSF, read corresponding chapters in J2EE guide and spec and tried to play little bit with JSF RI 1.1_01. I found very strange (at least for me) behaviour of regular input component (corresponds to inputText tag).
I have very simple example form (contains "select one", input component and command button). Corresponding backing bean has request scope. I set breakpoints in backing bean getters and during debug found:
1. On initial request both getters were called during rendering phase.
2. On form submit request getter for property bound to input component was called again (this looks strange for me) but getter for property bound to select box was not called (it looks as I've expected). This strange call occurs during validation phase. As far as I understand it was the following flow:
a) During initial request rendering response input box value wwas not stored in component state (I even may suggest that it was not set on component, just corresponding HTML tag with initial value was rendered).
b) On submit form submitted string value of input component was decoded from request parameters but local value was set to null (see above).
c) During validation phase submitted value was successfully converted and validated.
d) Then implementation had to detect component value change and called getValue() in order to obtain old value.
e) Implementation of getValue() first looked for local value field - it is null, then it should request for bound value from model.
I tried different ways to store state (client or server) but it was the same. Sadly MyFaces 1.1.1 implementation did even worse - local value of select was also null during first postback.
I wonder why it was implemented this way...
Thank you -
Dear All,
i am working on CRM 5.0 Netweaver-2004S-SR2, facing below errror.
Error when processing your request
What has happened?
The URL http://hllsap44.in.u1609.unilever.com:1080/sap/bc/bsp/sap/crm_bsp_frame/mainDH.do was not called due to an error.
Note
 The following error text was processed in the system CD2 : The current application triggered a termination with a short dump.
 The error occurred on the application server hllsap44_CD2_00 and in the work process 0 .
 The termination type was: RABAX_STATE
 The ABAP call stack was:
Method: BUILD_MODEL of program CL_CRM_BSP_ACCS_MODEL=========CP
Method: CONSTRUCTOR of program CL_CRM_BSP_ACCS_MODEL=========CP
Method: GET_MODEL_INSTANCE of program CL_CRM_BSP_ACCS_MODEL=========CP
Method: SET_APPLICATION of program CL_CRM_BSP_IL=================CP
Method: DO_INIT of program CL_CRM_BSP_FRAME_MAIN=========CP
Method: DO_INIT of program CL_BSP_CTRL_ADAPTER===========CP
Method: GET_PAGE_CONTEXT_CURRENT of program CL_BSP_CONTEXT================CP
Method: ON_REQUEST_ENTER of program CL_BSP_RUNTIME================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Soon reply will be appreciated.
thanks,'
Thakkar.thanks For prompt attention towards my problem..
DUMP: Runtime Errors MESSAGE_TYPE_X
Details:
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Model for application set CRMD_CASE has been maintained inconsistently
Long text of error message:
Diagnosis
After including the referenced application in the application set,
at least one structure name is no longer unique.
System Response
An inconsistent model leads to termination.
Procedure
Contact your system administrator.
Procedure for System Administration
IMG -> Customer Relationship Management -> Layout of User
Interface (People-Centric UI) -> Application Element-> Application
Set.
Technical information about the message:
Message class....... "CRM_BSP_BLUEPRINT_DB"
Number.............. 010
Variable 1.......... "CRMD_CASE"
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
thanks,
Rakesh. -
sir my iphone 3G was not on due to software update and its not resotre previous software and shown as error 1051 kindly resolve my issue as soon as possible
The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Paste into a Terminal window by pressing command-V. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
Below that, you may see some other lines. The first 9 lines should be exactly as above, apart from differences in the blank space within lines. Otherwise you can't use this procedure—STOP and ask for guidance.
If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
sudo sed -i~ '10,$d' /etc/hosts
You may be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts". -
Using a Variable in SSIS - Error - "Command text was not set for the command object.".
Hi All,
I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table I have created variables v_Archivequery
String packageLevel (to store the query).
<Variable Name="V_Archivequery" DataType="String">
SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
</Variable>
I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
But when I am generating the package and when running I am getting bewlo errror
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
Please let me know where am going wrong?
Thanks in advance.
Thankx & regards, Vipin jha MCPWhat happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
Could you try set the Delay Validation = True at Package and re-run ?
If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
-Vaibhav Chaudhari -
HT4859 The restore from iCloud was not set up when my iPad was reset
The restore from iCloud was not set up when my iPad was reset
Hi ljyjry,
Thanks for visiting Apple Support Communities.
See these articles for some information and steps that can help:
iCloud: Restore your iOS device from iCloud
http://support.apple.com/kb/ph12521
iCloud: Troubleshooting restore issues with iCloud Backup
http://support.apple.com/kb/TS4036
Cheers,
Jeremy -
Temp folder was not set for RTFStringbuffer Error
Hi,
We are using CR XI 11.0.0.895 and CR XI JRC is been used to generate the reports in PDF and RTF format.
While generating report of more than 1000 pages in RTF format throws the below mentioned exception
temp folder was not set for RTFStringbuffer
However, Generating reports in PDF format generates the report.
Find below the environment details which would helpful for the analysis.
CR XI 11.0.0.895
IE 6.0
MS-office 2003
Windows XP SP2
Reports JRC application deployed on Weblogic 8.1.4
Please suggest us a solution for this problem.
Thanks in advance.If you run [Process Monitor|http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx], do you see any file access errors when the JRC tries creating a temp RTF file?
I think I've recommended this before, but have you tried the newest version of the JRC?
[https://boc.sdn.sap.com/node/19020]
The XI Release 1 keycode will work with it.
Sincerely,
Ted Ueda -
I took my iMac to be fixed and when I got it back, mail was not set, so I called Apple and they helped me set up mail. Now the new mail goes to trash and there is no number by the 'inbox' to tell me how many new messages I have. I cannot save a draft to 'drafts.' There is a large number by 'trash' (I think all mail went to trash - including drafts). When I send myself an emai, it goes to trash also. This is on both my iMac (the one taken in) and my MacBook Pro (same emails) which was not taken in.
I went to 'rules' but have no idea what to do there. There are no rules in the rule box. When I click 'add rule' it puts 'rule 1' in the rule box, but since that was not there when I took it in, I delete it to have an empty rule box.
Can someone pleasehelp me. I am completely stupid with all this. Do not under stand what is suppose to be set up in 'rules.'
Thank you so much,
ArudiNow new mail is coming to both computer's inboxes but there is no number on the stamp icon on dock to show number of emails on the iMac. Nor is there a number by either email address under MAILBOXES/inbox (sidebar) on the iMac. This number is showing on MacBook Pro.
I also can save drafts now on both computers.
Seems the Pro is fixed and the iMac is only missing the numbers on dock icon and by addresses in inbox.
Now that the problem is less, I feel i am wasting your time but will continue so maybe I can get those numbers back.
Two emails > AT&T email and gmail.
Apple's Mail program for email - yes, and gmail.
IMAP for both accounts.
Did not change mail configuration on MacBook.
The iMac and MacBook Pro have the same mail configuration except in Accounts/mailbox behaviours/store draft messages on the server was not marked on MacBook > it is now.
'Store junk messages on the server' was marked on one computer for gmail, but is unmarked on both now.
On the iMac, Accounts/Accounts info/Outgoing mail for gmail is smtpgmail.
On the MacBook Pro for gmail it is smpt.gmail.com (plus) my email address.
Rules/Add rule window, on the MacBook third line is 'Any Recipient', on the iMac third line is 'From."
The last box on that line has my email address on the MacBook.
The last box on that line has the last address I sent an emil to (last night), on the iMac.
On the last line on iMac, no box was selicted for 'to mailbox' > I choose 'inbox' because it is on the MacBook Pro.
Now I have a Rule #1 and am not sure I should have because there was no rules marked when I took the computer in.
Thank you. I relized I had done the labeling wrong when so much of my question appeared twice and no one else's did. I know how to do it now.
Thank you so much,
Arudi -
If you have an itunes acct that was not set up to share and the lap top it was on is no longer working, is there a way to open up the old itunes acct to get music and photos off of it? This was before Icloud was available. Can you reset your itunes password somehow?
iTunes and the iTunes Store won't have anything to do with your photos. Those would be stored only on your laptop unless you made a backup of some sort. If you didn't, and the hard drive in your laptop has failed, then your photos are gone unless you wish to pay a disk recovery service a lot of money to try and get them back.
As to your music, if you purchased it from the iTunes Store you can probably re-download it. Go to the iTunes Store, log into your account, and click the Purchases link under the Quick Links. From there you should be able to re-download some or all of your purchased content. Note that not all content has been licensed for re-downloading in all countries at this time. You can see what content you can download here:
http://support.apple.com/kb/HT5085
You can also re-download content using an iOS device.
For full instructions, see:
http://support.apple.com/kb/ht2519
Regards. -
F-53 Error- u201C Item was not activated due to on line payment block.u201D
When we are doing payment document against T Code F-53 for FI document systems is giving message
That u201C Item was not activated due to on line payment block.u201D
This error is due to what ?
Regards,
Shekhar GaikwadHi,
Kindly release your invoice document in MRBR..
Then proceed further.
revert if any issues.
Utsav -
Revision: 14823
Revision: 14823
Author: [email protected]
Date: 2010-03-17 10:51:40 -0700 (Wed, 17 Mar 2010)
Log Message:
Fix bug where canPause was not set to false for live streams.
Modified Paths:
osmf/trunk/framework/OSMF/org/osmf/net/NetStreamPlayTrait.as
osmf/trunk/framework/OSMFTest/org/osmf/elements/TestVideoElement.asThanks for looking at this post. We have resolved the issue for ourselves by working with our DBAs to narrow down where the problem actually started. We found that the particular SQL we were looking at was not the issue. In a chart on a subsequent page (via a click through), we were actually running into where apex was starting to consuming memory but we were catching it later.
What we found was that when we had a chart query that was SQL containing a pipeline function, the memory usage went up. And within 10 minutes, the server would crawl to a halt. To release the memory, the DBAs would have to bounce the Apex instance. When I changed the query to be a function returning SQL, the problem stopped. I don't know what the correlation was between SQL and moving to a PL/SQL function returning SQL.
I am not even 100% positive of the pipeline function being the cause. I only know that this started happening about the same time as when I implemented the pipeline function. I understand you are leery of a one-second function/query running up that kind of utilization. No one here believed me either (including me really). We figured it HAD to be a coincidence. But once I changed the query from SQL to a function returning PL/SQL, our problem went away.
Thanks to all who looked at and thought about this.
Walter -
/sap/bc/webdynpro/sap/ags_workcenter was not called due to an error
Hi,
I get the following error when I click on Exception Analysis for one of our managed system.
Solution Manager Diagnostics -> End to End Analysis -> Select the Managed system and click on Exception Analysis
The URL http://kressapcrm.in.kres.keane.com:8000/sap/bc/webdynpro/sap/ags_workcenter was not called due to an error.
Note
The following error text was processed in the system SOL : Exception condition "COMMUNICATION_ERROR" raised.
The error occurred on the application server KRESSAPCRM_SOL_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: EXECUTE of program CL_IGS_CHART_ENGINE===========CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CBUSINESS_GRAPHICS======CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SOL in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server KRESSAPCRM_SOL_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server KRESSAPCRM_SOL_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 999 -u: E2E_ADMIN -l: E -s: SOL -i: KRESSAPCRM_SOL_00 -w: 0 -d: 20100107 -t: 164340 -v: RABAX_STATE -e: RAISE_EXCEPTION
Regards
Shailaja>
shailaja stalin wrote:
> (...)
> The URL http://kressapcrm.in.kres.keane.com:8000/sap/bc/webdynpro/sap/ags_workcenter was not called due to an error.
> Note
>
> The following error text was processed in the system SOL : Exception condition "COMMUNICATION_ERROR" raised.
> The error occurred on the application server KRESSAPCRM_SOL_00 and in the work process 0 .
> The termination type was: RABAX_STATE
> The ABAP call stack was:
> Method: EXECUTE of program CL_IGS_CHART_ENGINE===========CP
> Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CBUSINESS_GRAPHICS======CP
> Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
> (...)
Please check the configuration and version of the IGS.
Regards,
Ruediger -
Revision: 5812
Author: [email protected]
Date: 2009-03-31 11:34:56 -0700 (Tue, 31 Mar 2009)
Log Message:
Fixed a bug where direct use of Animation failed because AnimationProperty was not setting up its internal keyframes with correct duration information, so the animation would skip immediately to the end.
Bugs: SDK-20356
QE Notes: spark/effects Mustella tests currently hosed, couldn't run test suite
Doc Notes: None
Reviewer: Jason
Testing: checkintests, Mustella effects tests could not be run (post-rename issues)
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-20356
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/AnimationProperty.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/animation/Animation.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/AnimateColorIns tance.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/AnimateShaderTr ansitionInstance.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/FadeInstance.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/MoveInstance.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/ResizeInstance. as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/Rotate3DInstanc e.as
flex/sdk/trunk/frameworks/projects/flex4/src/spark/effects/supportClasses/RotateInstance. asHi
Can you please try setting up full persmission in the security properties for everyone on the wsconfig folder C:\ColdFusion10\config\wsconfig and restart ColdFusion Server.
Swaraj -
WLI Application Build issues - The apt.factory.path was not set
Hi,
I have been trying to execute the Workshop exported Ant Script on Remote machine. In my local machine where i have access to workshop i am able to run the ant script whithout any issues. But when i try the same script on Remote machine (unix) I ma getting the below exception.
In my application, there are two projects. One web application and one EJB project, and i am trying to makr Ear file out of this.
If any of you have faced this issue or if you have any inputs pl help me out.
/opt/buildserver/home/e0271019/WFM_1031_migrated_Source/Migrated_Code_With_AntScript/wfm/build.xml:340: The following error occurred while executing this line:
/opt/buildserver/home/e0271019/WFM_1031_migrated_Source/Migrated_Code_With_AntScript/wfm/build.xml:690: The apt.factory.path was not set, but the beehive annotation processors must be on the apt factory path.
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(ProjectHelper.java:508)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.java:397)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
at org.apache.tools.ant.Main.runBuild(Main.java:758)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
Thanks
ChandranHi,
I have been trying to execute the Workshop exported Ant Script on Remote machine. In my local machine where i have access to workshop i am able to run the ant script whithout any issues. But when i try the same script on Remote machine (unix) I ma getting the below exception.
In my application, there are two projects. One web application and one EJB project, and i am trying to makr Ear file out of this.
If any of you have faced this issue or if you have any inputs pl help me out.
/opt/buildserver/home/e0271019/WFM_1031_migrated_Source/Migrated_Code_With_AntScript/wfm/build.xml:340: The following error occurred while executing this line:
/opt/buildserver/home/e0271019/WFM_1031_migrated_Source/Migrated_Code_With_AntScript/wfm/build.xml:690: The apt.factory.path was not set, but the beehive annotation processors must be on the apt factory path.
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(ProjectHelper.java:508)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.java:397)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
at org.apache.tools.ant.Main.runBuild(Main.java:758)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
Thanks
Chandran -
Webgui was not called due to an error
Error as Below
==============
Error when processing your request
What has happened?
The URL http://server01.mydomain.com:8005/sap/bc/gui/sap/its/webgui was not called due to an error.
Note
The following error text was processed in the system Q61 : System error
The error occurred on the application server server01_Q61_05 and in the work process 3 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSMTR_NAVIGATION
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system Q61 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server server01_Q61_05 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 3 in transaction ST11 on the application server server01_Q61_05 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 999 -u: P0000XXXX -l: E -s: Q61 -i: server01_Q61_05 -w: 3 -d: 20080612 -t: 132603 -v: ABORT_MESSAGE_STATE -e: System error
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
================
What is the solution ??
================
PRHi,
You can check [note 816973|https://service.sap.com/sap/support/notes/816973] which gives details on problem analysis with ITS as well as the steps to follow to get it working.
Regards,
Nelis
Maybe you are looking for
-
Disabling partner data tab at header and item.
25.11.2008 Hi friends, Is there any user exit to disable 4 out of the 5 partners in the partner functions tab at header and item level as my requirement is not to allow the user to change the partner functions SP, SH,BP,PY. I cant use SHD0 or use th
-
Download of 8.2 ios on iPhone 5s caused phone to lock up with iTunes icon and cable icon on screen .Will not reboot. How to fix?
-
CS4: Media Encoder - Black Bars of Doom
I dont see a forum for the Adobe Media Encoder so I'm sorry if this is the wrong place for this. I have the CS4: Design Premium. Everything is updated so the encoder is at verson 4.2.0.006. Now when I have some video dont for NTSC TV 720x480 (left) a
-
Hi, Any helps will be very appreciated. I have a problem in the JCombobox dropdown list. I want to have multiple columns in the dropdown list of the JComboBox, eg. when I type something in the JComboBox, it will query some infomation from the Databas
-
Error in ODS activation due to # character
For last two days I have been getting the error in the process chain. The process chain stops at ODS activation because the data contains '#'. I have gone SAP Note 173241, which says that # value is allowed in data. Is there any way to remove # from