Bridge 1300 building to building link for VOIP Data Rates settings and QoS

Hi,
What are the recomendations for data rates settings of wlan fo using voip in a link building to building.
Default is
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0
54.0
Should i maintain or change to what?
Also what QoS should i apply?
Thks
Best Regards
Marco

OFDM is a physical layer encoding technology for transmitting signals through the RF. This method breaks one high-speed data carrier into several lower-speed carriers that transmit in parallel across the particular RF spectrum. OFDM, when used with various modulation types such as 802.11g and 802.11a, is capable of supporting data rates as high as 54 Mbps.
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/5_0_1/english/administration/guide/7921wrnt.html#wp1085347

Similar Messages

Re: Problem providing download link for BLOB data in apex report

Hi Don,
Your solution below worked but in the download option i only see save but not open for PDf file in the blob. Please let me know if you have any suggestion to achieve it
Thanks
Jo
Problem providing download link for BLOB data in apex report
591953 Nov 19, 2008 1:55 PM (in response to 660436)
Currently Being Moderated
Good morning,
Here is how I have solved this problem.
1. The select statement in the sql for the report should not include the BLOB column. I decided to select only 2 columns, the column that has the key and the column with the filename.
2. On the first column ( the primary key ) I put in the format statement that was simply DOWNLOAD:TABLENAME:BLOB_COLUMN:PRIMARY_KEY
This works. I believe that the Oracle error I was getting was because I was trying to apply this format statement to the actual BLOB column.
So, it appears that you can use any of the columns in the report to hold the DOWNLOAD format statement since in the format statement, you are defining the BLOB table, BLOB column and the primary key into that column.
Hope this helps,
Don.

Branched out from a years old thread.
user3003326 Don't post to old threads, please.

Need a link for PS CS6 Extended Student and Teach

Need a link for PS CS6 Extended Student and Teacher's Edition. My copy fried on my laptop and I need to re-install or do a repair install. The adobe site is trying to force me into this cloud product world. The links here:
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Are broken --- I won the product - just need install files again without being assimilated into a whole new cloud platform. Why break the old links? I have had this about 20 months....

Manning777 you should be able to download the software from the page you referenced. I would recommend trying a different web browser or perhaps checking the security settings on your browser.

Using the Express as Bridge with an SMC Gateway device for VOIP Possible?

Hi there:
I want to purchase a VOIP Internet phone & line and am concerned that it may not work with my Airport Express. I can use any old phone as long as it is hooked up to the VOIP gateway device which must be connected directly to my High Speed DSL modem. I am currently using the Express and am connected using PPoE. What I need to do is connect the VOIP Gateway directly to my high speed modem and then connect the Express to one of the Gateway's LAN ports.
Here is what I was told, I need the express to be compatible with:
An SMC Gateway device for VOIP
The Default Network Setup: 192.168.1.1
Sub Net Mask: 255.255.255.0
DHCP enabled
IP Range 192.168.1.100~199
The wireless router must be set to bridge configuration.
What I am thinking is in my Airport Admin Utility go to the Internet Section and change my current PPoE settings to:
Connect Using: Ethernet
Configure: Manually
And then enter the IP Address, Subnet mask as per the instructions
I am not sure about the router address or DNS servers.
Or could l just set Configure to: Using DHCP and it would find the SMC Gateway device since I would be plugged into it's LAN port?
I have not comitted to changing companies yet so I do not have the gateway device and cannot test this out. Please advise if this will work or not.
Is the Express even compatible with an SMC Gateway?
Thanks so much
W

...in the Internet section would I leave it as is (currently set to Connect Using PPP over Ethernet (PPoE) or would I need to chane that to Connect Using Ethernet and then Configure to Using DHCP or Manual?
It doesn't really matter since the AX is acting as bridge. If for some reason setting it one way doesn't work, change it to the other setting.

Mathematica Link for LabVIEW Integrates Design Models and Measurements

Mathematica Link for LabVIEW, a new technical computing
application created by BetterVIEW Consulting, is now available.
This software bridges National Instruments LabVIEW graphical
development environment and Wolfram Research Mathematica
technical computing software to help engineers and scientists
more easily acquire and analyze measurements throughout all
phases of the design process.
Mathematica Link for LabVIEW combines the data acquisition,
analysis, and graphical user interface capabilities of LabVIEW
and the modeling and analysis algorithms of Mathematica to speed
development of custom applications in hundreds of industries,
from quantum mechanics to automotive. With this software,
engineers can control a LabVIEW application (Virtual Instrument
or VI) from Mathematica or access Mathematica from within a
LabVIEW VI.
Mathematica Link for LabVIEW features built-in, high-level
functions for creating a communication path between LabVIEW and
Mathematica to achieve seamless integration throughout the
design flow, from the first mathematical model to validating the
final design. For example, engineers and scientists can easily
send numeric computations to the Mathematica kernel and return
results to LabVIEW, visualize LabVIEW data using native
Mathematica data visualization functions, and create simple, yet
flexible simulation and control VIs that take advantage of the
symbolic programming capabilities of Mathematica.
Integrating two leading technical computing systems like
Mathematica and LabVIEW brings technical professionals one step
closer to having the ideal, start-to-finish work environment.
With Mathematica Link for LabVIEW, entirely new, hybrid
workflows become possible, thus enabling users to quickly and
easily find solutions to complex problems--solutions that would
be difficult, if not impossible, to realize using only one of
the component packages.
Mathematica Link for LabVIEW requires Mathematica 4.1 or later
and LabVIEW 6i or later, and is available for Windows and
Macintosh platforms. For more information about Mathematica Link
for LabVIEW, visit:
http://www.wolfram.com/products/applications/labview

Socalledvita-
What functionality are you looking from the Amplitude and Level Measurement Express VI? There is not one-one replacement you can use. However, there are definitely ways of calculating the DC and RMS values of a signal as well as finding the max and min points, etc. Please be more specific in what you are trying to accomplish.
Regards,
Mike S
NI AE

Issue in confirmation links for personal data ESS application (CA)

Hi All,
We have implemented EXIT button configuration for ESS applications and the Exit button along with 'Go to Home page' link is navigating to custom created page in portal.
The configuration done earlier for ESS applications like Address Update, Family Member/Dependents works fine.
We got a new service added (Personal data) & tried configuring the Exit button for this application also.
Some how the exit button doesnt seem working for Canada besides it working for US.
Please help in figuring out if there is any cause of the Exit button not working for personal data application for molga 07 specially. Adding to it, the links for confirmation screen are also not working for the same application
Appreciate your help.
Thanks

Hi,
As per your Req.....
Its seems to be the Services exits that are county specific Services .........mease the Molga ( country Code ) is set for this services is "US"
That Y its working fine .....
But as per your REq you want this Services working for the Molga 07 ...
I thikn for this you need to set the Molga 07 in the contry specific home pages......
Then it will work fine

Problem providing download link for BLOB data in apex report

Hi,
I am trying to create a report on a table with BLOB data so that the report displays a "download" link for the BLOB data. I am trying to give users the ability to download files from a website.
I have been following the instructions in OBE "Defining and Viewing BLOB Data in Oracle Application Express 3.1".
In the report, for the BLOB column, I have specified values for the following fields in Report Attributes->Column Formatting->Number/Date Format->BLOB Download Format Mask:
BLOB Table
BLOB Column
Primary Key Column 1
MIME Type Column
Filename Column
BLOB Last Updated Column
However, when I run the report, I get the following error, even thought there is data loaded into the table:
report error:
ORA-01403: no data found
When I remove the BLOB Download Format Mask information for the BLOB column, then the data displays in the report, but without the "download" link for the BLOB data (which is expected):
E.g.
Title Author Created BLOB_CONTENT
Siebel & RAC Best Practices     Erik.Peterson     17-SEP-08     [datatype]
Siebel Grid Case Studies     Mark.MacDonald     17-SEP-08     [datatype]
Siebel CRM Applications protected by Oracle Clusterware     Kelly.Tan     17-SEP-08 [datatype]
Oracle Grid: The Optimal Platform for Siebel Solutions Mark.MacDonald 17-SEP-08     [datatype]
Any ideas why I'm seeing the ORA_01403 when I specify the BLOB Download Format Mask?
Edited by: user716599 on Sep 18, 2008 12:31 AM

Good morning,
Here is how I have solved this problem.
1. The select statement in the sql for the report should not include the BLOB column. I decided to select only 2 columns, the column that has the key and the column with the filename.
2. On the first column ( the primary key ) I put in the format statement that was simply DOWNLOAD:TABLENAME:BLOB_COLUMN:PRIMARY_KEY
This works. I believe that the Oracle error I was getting was because I was trying to apply this format statement to the actual BLOB column.
So, it appears that you can use any of the columns in the report to hold the DOWNLOAD format statement since in the format statement, you are defining the BLOB table, BLOB column and the primary key into that column.
Hope this helps,
Don.

Bridge Point to Point with AP 1552EU - Maximun Data Rate

Hi all, I have a question for you, and I need your help.!!!
I have two site (Central and Remote) and I did a link point to point between it. These AP are managed by a WLC 5508, the distance between this AP is 30 Mts or 98 feed, I have configured the channel width in 40Mhz in the WLC, and MCS-5 in the data rate sección of Bridge AP. I did tests flooding the link and I only can transfer 40Mbps in both directions at the same time. This ap model is 802.11n capable. So how can I increase the data rate from 40Mbps to 100 o more Mbps.?
The antennas are directional with two ports (TX/RX) and are connected in the ports 1 and 3 of AP.
I hope your response.
Thanks,

Wow. You're radios are only 100 feet apart and you have 14dBi directional panels hooked up to them? Hopefully the TX power is configured properly and is turned *way* down.
You should certainly be able to get 802.11n HT rates between two 1550s with these antennas and 2 spatial streams. You *should* be able to achieve HT MCS 15 at 40MHz with a PHY data rate of 300 Mbps. Actual Layer 3 throughput would be approaching 100Mbps, but I think you are more likely to see ~80Mbps in actuality.
Best of luck!

Problem in using voic eover for entering date in contacts and calender etc.

for a blind user in iphone 5s with voice over 'ON' there is difficulty in scrolling the date in calender and contacts etc. please provide "typing number pad" instead of the fancy 'scroller'.

Send feedback to Apple here:
http://www.apple.com/feedback/iphone.html

Flash builder 4.6 flex for mobile with mysql php and json

I am trying to create an app that get data from online mysql server via php service and displays the data in a list
I have been looking all over the internet but had no success in finding a working tutorial and i am frustrated
can anyone help or direct me to a working tutorial please ?

Watch the Online Video Course Flex 4.5 and PHP: Creating Data-Driven Applications

Using Dynamic Link for projects cut in Premiere and effects in AE.. Rendering Question..

Hello,
So this baffles me. I've been working a lot in Premiere CC lately with ProResHQ green screen material. I send the sequence or individual clips using After Effects by right clicking on the clip in Premiere and selecting Create After Effects Composition...
So I do my thing and when it comes time to render, I select render from IN to OUT in Premiere and wait. Now here's my question. If I select render in Premiere, it will be very sluggish until I click on the After Effects icon in my dock which brings the app to the foreground again. For some reason, this will dramatically accelerate my render speeds in premiere after I re-select the AE app. Why is this doing this?
I'm using a new Mac Pro trashcan tower 3.5 clock speed. 64GB ram. Dual D700 graphics card. I am using a USB3.0 drive for my editing and the internal drive on the tower for the scratch. I'm getting a Lacie 1TB little bigdisk thunderbolt2 that will be my prime scratch and video location for future stuff.
Thanks for your help -
R

Generally speaking, there is no 'one & only' proper workflow. Just keep in mind the following:
- not all effects and transitions are properly translated when travelling from PrPro to AE;
- in Dynamic Link scenario PrPro communicates with AE projects via single instance of headless AE, which creates a bottleneck. See this good old thread on Dynamic Link workflow, pay attention to Todd's comments;
- since AE allows to set a DI as a proxy to dynamically linked comp, with reasonable amount of dynamically linked comps in PrPro project you can enjoy the best of both worlds, instantly switching between a DI and dynamically linked comp back and forth with no needs to replace anything in PrPro timeline. Test on your own with which amount of dynamically linked comps setting DIs as proxies still work. For my rig test 30 min sequence built out of 935 dynamically linked comps, which are just source footages in their own comps, hence, the equivalent to rendered DIs set to proxies, takes around 27 hours to render, while 30 min sequence built out of the same 935 source footages renders in real time.

I need a link for re-installing Design Premium and acrobat 9

I had to replace a hard drive so now I need to load my software back to my laptop. I purchased Design Premium CS5 and APRO 9.0 in 2011. How do I restore my products to the laptop?

if you follow all 7 steps (especially steps 1,2 and 3), you can download here: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
and activate with your serial numbers.
if you have a problem (error message, unavailable page or you are offered a current adobe version), you did NOT follow the directions.
the most common problem is failing to meticulously follow directions 1,2 and/or 3 which are needed to add an adobe.com cookie to your computer that allows you to download directly without using the akamai download manager.
again, follow the directions and you'll have no problem.

Voip inline power options and qos

hi all
can you please tell me how I set the inline power on my switches to off and auto, also how and where do i set the qos for my voip phones !!

To modify the power settings use the following interface commands:
power inline auto |never |static
auto Automatically detect and power inline devices
never Never apply inline power
static High priority inline power interface
bye
FCS
Please rate me if I helped.

Function Modules for Format Date, Month Name and Quarter value.

Hi All,
1. I am getting the date field from the Flatfile, so i need to format the date to YYYYMMDD. Is there any Function module for that in BW.
2. Based on the above Formated Date i have to find out the Name of the Month like JANUARY, FEBUARY etc.
3. Based on the same above Formated Date i need to find out the Quarter like 1, 2 etc.
Could you please let me know if any function modules are there for the above questions in BW not in ABAP, why i mention is some Function modules are there in ABAP but not in BW.
Thanks in advance.
Regards,
srinivas

Hi ,
1.If your input date format is MMDDYYYY then Use SDATE as conversion routine in trans strucutre to convert into YYYYMMDD.
2.By passing year as input parameter for the following FM you would get all the months with text.Using READ statement in routine you can get month name
MONTH_NAMES_GET
3.For Quarters you can use the following FM:
TSTR_PERIODS_QUARTERS
hope it helps...
regards,
Raju

MDM-XI-ECC for Master data like Vendor and customer

If there are some changes like addition or deletion of some fields in customer or vendor, then it is not possible to use the standard pre-delivered content which SAP has provided.
So in that case, how can we handle that in XI?
For example DEBMDM or CREMDM?
The predefined content splits this into two idocs CREMAS & ADRMAS and serialises and then sends to ECC.
So when there is customization of Idocs, how can we handle it?
Any clues please?
Thanks
Kiran

For various reasons I would recommend not using the predefined content. Mainly for the exact scenario in which you describe. If you have to add custom fields, then you can't use the predelivered content, however you can copy the predelivered content and modify it. The MDM content for XI uses XSLT mappings, so if you are familiar with XLST then you can work with those, however I prefer to generate a graphical mapping, because it only takes a few seconds anyway. You simply have your source message be the CREMDM (or DEBMDM) format, and the target is CREMAS and ADRMAS. You simply select the top node of CREMDM and do a 1:1 mapping to CREMAS, then map the ADRC segment of CREMDM to the ADRMAS IDoc. If you use the graphical tool then you can modify your map easier if you need to add or remove fields. For example, if you want to do a IDoc reduction, then you can perform the IDoc reduction in ECC, and then swap that message type out with the one in your graphical map. Or if you want to add fields you can perform an IDoc extension in ECC, and then swap that message type out in XI. It's much easier to make these changes when you've built a graphical map.

Bridge 1300 building to building link for VOIP Data Rates settings and QoS

Similar Messages

Maybe you are looking for