Bring folder to front of projecter when opening via BuddyAPI

I have a projector which fills the screen when opened.In my projector I have a simple menu with clickable events. When you click on each event it opens a folder (used baOpenFile with BuddyAPI). My problem is, when on a Mac, these files open behind the full screen projector so you cannot see them. Is there a way of opening the folder and making it appear infront on the projector? In Windows, it does this automatically.

I have the exact same problem.
The source of the problem is that on Linux there is no single file manager.
I tried to determine if firefox uses xdg-open or some other technique by searching the source but have not found it yet.
If the proper call is used, for most file explorers this function can be realised.
If xdg-open is used, it should be patched, which I also tried and has not yielded results yet.
What would help me pick this up further is the answer to the question: what does firefox use to open the file in the download manager?

Similar Messages

How can I stop iMovie from making thumbnails of clips from past projects when opening the program to digitize new clips for new project. i have looked in the preferences and couldn't figure out what to disable.

How can I stop iMovie from making thumbnails of clips from past projects when first opening the program to digitize new clips for a new project. It takes forever for it and is very annoying. I have looked in the preferences and couldn't figure out what would disable this problem.

You do not need to move your cursor much when pressing the mouse button to cause the tab to tear-off/tear-away into a new tab. No "sensitivity" setting that I am aware of. The tab in the new window can be dragged back to the original window.
To disable the feature, install this: https://addons.mozilla.org/en-US/firefox/addon/bug489729-disable-detach-and-t/
*Read the information on the above page
*Set options for the add-on: Add-ons > Extensions, click Options next to the specific Extension (the 2 options are defined/explained in the above page).
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''

Form not loading when opened via RCPTT

Hi,
I have a Form which is loaded when I click a radio button. It is working well without RCPTT as the screenshot 2.png shows.
But the same option when clicked via RCPTT replay option, it is not happening. See screenshot 1.png
It is recording but not replaying it because this option is not loading.
How can I solve this. Kindly let me know.
I have also attached the log file in my workspace/.metadata
Thank you
Jeevan

Hi Jeevan,
Yes, correct.
Looks like a bug in RCPTT.
Jeevan, is it possible to somehow get your AUT to reproduce the issue on our side?
You can email me at [email protected]
Kind regards,
Ulyana.

Folder windows do not update when open

I have a new computer with Windows 8.1. When I have a folder open and try to either create a new sub-folder, or move files into it, the new items are not visible until I close the window and re-open it.

Suggestion: Use Explorer windows ONLY on real hard drive folders, not abstractions such as Libraries.
It's much more likely to update properly on hard drive folders.
Also, there's a setting that you can change that often seems to help:
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Cannt see files when opening via Captivate

I am using Captivate v4 and Windows XP.
When I launch Captivate and open my projects folder on my C drive, I am unable to see saved projects I know are in the folder.
I can only see projects ending in .cp but not those projects I have zipped, saved as .exe or the automated backups created by Captivate.
If I open the file direct from desktop...I can see them.
Guess this must have something to do with file types Captivate will work with, but as I have not changed anything I wonder what has gone wrong?
Any ideas anyone please?
Noel
Staffordshire
England

Captivate can only open six different file types (as projects).
Things like .exe and zip files are not among those six.
So they wouldn't be visible unless you did something like type *.* in the File-name text box.

Error when opening, via email, files from PC computers

Whenever I receive a file through email from another person who has created the file on a PC (i.e., a Word or Adobe Acrobat file), the file won't open and I receive this message:
"Word (or other application, adobe, etc.) cannot open this document. The document might be in use or might not be a valid Word document."
I do know that the files aren't corrupted because they do open successfully when I open them on a PC.
What do I do to solve this problem?
Thanks.

Welcome to the discussions!
You can always ctrl-click the document and choose Get Info > Open with > ( Choose from the dropping menu or assign ) the application you want.

Availability reports expand object list when opened via web not console after upgrading to UR5

recently upgraded to UR5 from UR3 of SCOM 2012 SP1.
This worked fine before the upgrade and now it does the following odd behavior with the "+ object(s)" link.
I created an availability report (MS Generic Report Library) for one or more servers through the console. It looks OK through the console, but when I open the report through the web interface to the report server, the "+ object(s)" section
is already expanded. It even shows a plus "+" sign when it IS expanded and changes to a minus "-" sign when it is collapsed. This is backwards.
This worked OK prior to UR5.
Ideas?
Ted

Hi,
This issue should be related with the report definition in the SSRS, it seems like that the object's visibility value is show, but the sign is "-" when defined in the SSRS.
Please post in the SQL forum for further assistance.
https://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Regards,
Yan Li
Regards, Yan Li

No files opened in Acrobat X when opened via JavaScript (as ActiveXObject)

Hi together
In a web application (ASP.Net) we developed, the customers may open, edit and save pdf files. The files are stored on a network drive which is connected over a vpn tunnel. To edit the selected files, Acrobat is opened by a JavaScript from within our application. Then the needed documents are opened in Acrobat. This web application is in use by various clients since about 6 years and worked without problems with Acrobat 5 - Acrobat 9 (all Pro versions). However, in Acrobat X Pro no documents are opened (Acrobat itself is opened but just as an empty window).
The JavaScript to open Acrobat and the files looks somehow like that:
objAcro = new ActiveXObject("AcroExch.App");
objAcro.Show();
objDoc = new ActiveXObject("AcroExch.AVDoc");
objDoc.Open("X:\Temp\File.pdf");
Thank you very much for your help.
Kind regards
Thomas

Hi Sabian
Thanks for your hints. You pointed me to the right direction. I managed to open and edit the pdf files now, but it's not really very handy for everyday use. With the following settings, the documents are opened:
- Enhanced security is switched on (files are not opened if switched off)
- Protected view may not be set to off
- I entered the url and the \\server\share where the documents are stored to the trusted sites
So far, so good. But for every single file which is opened in Acrobat, I have to click the "activate all functions" button to be able to edit the files. This is not realistic in production because users edit more than 100 documets a day...
Do you know if there is a possibility to confirm "activate all functions" once for all documents opened from trusted sites?
Thank you for your efforts.
Thomas

When link is opened by clicking middle button, it appears in tab toolbar;but when opened via left button (set to open in new tab) it is not shown - hidden under BACK key? I'd like left clicked tabs shown. & use mid.button for Enter.

Windows XP; FireFox 4.0
Would like not to have to use any keyboard shortcuts.

No. The Tab bar is a regular toolbar in current Firefox versions, so you get the normal right-click context menu of a toolbar if you right-click the tab bar.
You can double click on empty space on the tab bar to open a new tab if you do not want to use the new tab button. 
You can drag a link on that new tab button to open that link in a new tab. 
You can also drag the new tab button on another toolbar if you would like that better. 
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"

Is it possible to have a VI "run when opened" when accessed via Internet Explorer?

I am trying to get a remote panel application to "run when opened" when is accessed via Internet explorer. I have multiple remote panel licenses on the server and the VI is Re-entrant. The application works well except for this issue. Having the VI "Run When Opened" via IE is very important to the user. As is, when IE opens, the user must click on the panel image once to get the VI's attention and then again on the start arrow to run the program. Is there any way around this or a way to simplify the process?
Thanks.
Solved!
Go to Solution.

This is actually the intended operation of remote front panels, however, we can simplify the operation to meet closer with what your customer wants. Basically, if you were to always have your program run in somewhat of an idle state, you can use the Application Control>>Property node for 'RemotePanel.ConnToClients' property to determine when a user is connected and run the proccess of the program as soon as a connection is detected. When no connection is detected you could have the program run in an idle state. The attached screenshot shows a general way to do this. Have a good evening!
-Bob
-Bob
Attachments:
idle state.JPG ‏45 KB

Strange newer FCP version error message when opening project

I'm working on a large (500+ hours) project that I have divided into seperate Final Cut projects so that I can load the sequences without waiting 10 minutes for the masterclips project to open. Lately, when I load the masterclips project it will give me an error message that says that it was made in a newer version of Final Cut. Then, when I restart FCP it will open fine. Does anybody know why it's doing this and how to fix the problem?
I have been copying a lot of media with media manager lately, it has crashed once or twice could that be part of the problem? Also, there are about 20,000 clips about 75% of them are online and they were captured in different capture projects so they are in different capture scratch folders. Is the fact that they are scattered a problem?

If you want, you could send me the project. I''ll
open it and do a save as and zap it back to you. You
should then be able to open it and do a reconnect.
May help. My email is in my profile. If it's too
big to email, you could bring it by my cutting room
(in times square). If you can email it, be sure and
archive the file before attaching to an email.
Thank You
I really appreciate the offer and I may still take you up on that, but can I get the same result by opening it on one of out other editing systems and doing a save as? The files are too big to email and Times Square is a bit far from where we are.
Will reconnecting all of the media to a copy of the project help FCP dealing with badly written meta data for clips that is causing corruption. Is that the idea?
Thanks again for your help.

Hello. I have a new Computer and import my mediathek with an externe storage. When opened the new Mediethek in front of every song there is a explanation mark: original song could not been found. I try everything. Whats the Problem??

Hello. I have a new Computer and import my mediathek with an externe storage. When opened the new Mediethek in front of every song there is a explanation mark: original song could not been found. I try everything. Whats the Problem??

But it seems the OP has a setup where the media is on the external drive, and the library files are on the internal. This is what I refer to as a split library, Migrating such from one computer to another is not straightforward. Often iTunes will have some definite idea about where the files should live, and updating the setting of the media folder won't change that. If it requires a drive letter change that is usually not too hard, but sometimes there is another preference file that needs tweaking to indicate which of the old & new layouts for the library is being used. In more extreme cases I have a script for automatically making track by track repairs.
tt2

After Effects CC: how to retain Camera Raw's settings when opening the project from a different drive

I want to open a project from a drive which is different than the original one, but which has exactly the same folder structure and files as the original drive. When opening the project, all files appear as missing because the drive is different. When I replace these missing files for the ones in the new drive, After Affects relinks all media. However, the camera-raw settings that were embedded in such files are lost: After Effects opens the files as no previous camera-raw correction had been done. Is there a way to avoid this?

What could be in my project that makes it unable to open?

How do I edit data source when opening Lumira project on a new PC?

I have been working on a project in Lumira for a client of the company I work for. The idea is that I build the Lumira project for them (with the goal of them being able to analyse data from their logistics department), and I then hand the completed project over to them, from which point they are able to update the data on a weekly basis.
I have been updating the data (which is derived from an excel spreadsheet) for a number of weeks with no issue at all, and the client is thoroughly impressed with it, and with the capabilities of Lumira. The problem is that when I want to share the project with the client, ie. by allowing them to open it and edit it on their own computers I am unable to do so.
This is the procedure I follow:
From My Documents, I open the folder named SAP Lumira Documents, select the project in question, and email it to the intended recipients.
From there, I instruct the recipients to open SAP Lumira, select File>Import to folder, and then select the project.
When the project is open, it works and interacts perfectly, but at this point, I want the client to be able to do the following:Select Data>Edit; to allow them to specify a new data source (which is identical to the one upon which the project is built), and therefore be able to update the data as and when necessary, without my help.
When I do this, however, I receive the following error:
Unable to find file "File Name & Location"
How do I work my way around this? I could rebuild the project on a computer at the client’s premises, but the idea is that many people are able to use this project, and refresh the data. So it is obviously impractical for me to rebuild this multiple times. I would really appreciate your assistance with this.

To elaborate on Tammy's idea, you could use for instance C:\Users\Public at the place where you initially put your Excel file to make sure this is found on the target computer. I would consider this a workaround though.
Or for Lumira documents that you already designed, change the location of the Excel file and use Data/Edit from your computer, then save the Lumira documents before sending them to the target audience.
From my humble opinion, the product should allow to use Data/Edit and change the source file even if the initial file path is no longer found. This should be possible for your target audience.
Antoine

Captivate 5: msvcr90.dll error when opening projects from CP4

Hi,
I have a problem during a few days and I don't know how to solve it.
I'm running a SO Win XP (with SP3) and I have been using Captivate 4 without any problem for months Last week I installed Captivate 5 (I deleted CP4 from the computer - not enough space for both versions)
CP5 works fine when I open a new project on this version or opening a project .cptx file previously created with CP5. My problem appears when opening a project previously created with CP4 (file with extension .cp). The CP5 tries to update the file but suddenly an error forcing to close the CP5 appears.
The details of the error are the next:
AppName: adobecaptivate.exe AppVer: 5.0.2.630 ModName: msvcr90.dll
ModVer: 9.0.30729.4148 Offset: 00030655
Other computer in the office (running Windows 7) is working correctly, without the problem I have in my win XP machine.
Any idea to try to solve it?
Many thanks in advance. Regards.

Was there a solution to this problem as I encounter it in Captivate 5.5.0.257 when trying to edit a slide containing audio files for a captivate 5.5 project. The project can be previewed and it playes all the slides but none of the audio. If I click a slide in the filestrip which has audio Captivate will crash and show the error reporting screen. If l click on the audio in the library it will also crash captivate
The audio folder in the library has 5 items all called Narration1 with a use count fo 1 but with different sizes. even right clicking on the audio here will crash captivate. The other entries in the library don't case a crash
I have tried the project on 2 different computers but both will crash captivate if I try to select a slide with audio or use the library to try to select the audio

Bring folder to front of projecter when opening via BuddyAPI

Similar Messages

Maybe you are looking for