Broken External Hard drive

Hiya everyone!
I wanted to ask some advice...
My external hard drive is broken and I wanted to know if anyone knew of a Data Recovery service so that I can get all of my photographs back off it ASAP! In the midlands or warwickshire in the UK... Or if anyone has any advice that would be amazing.
Thanks
Leanne

Leanne Rose wrote:
My external hard drive is broken
Broken how? Nothing?
Could be the enclosure itself- maybe the drive is fine unless you have more corroborating evidence?

Similar Messages

How do I move files from a broken Mac Book to an external hard drive

I have a broken MacBook pro, the hard drive failed and I want to move the files onto an external hard drive. I know I can transfer the files onto the external hard drive by running the software on the external hard drive and accessing the files on the Mac Book, but I dont know how to do it.

How can you do that if the drive has failed? You cannot access a failed drive unless it is actually still functioning.
To access from an external drive you need to install the operating system on the external drive then boot the computer from the external drive. You can then access the internal drive in order to copy files and folders from it to the external drive.

HP Simple Save 2 TB External Hard Drive (3.5-inch, USB 2.0) Broken HELP!

OK so I've searched around for a solution to my problem but have found no answer so I'm trying here.
I've had my HP Simple Save 2 TB External Hard Drive for a few of years now, it's served me great, I used it for storing all my photos but the usb connector has snapped off from the small CD drive inside the casing.
This has simply been through use, it was working fine, not wobbly or mistreated in any way, it must have just came to the end of it's life and now I can't hook it up to my computer to get the photos, I'm desperate to get them back, wedding photos, birthdays etc most of you must know how I'm feeling.
So I looked up a few solutions, one was to buy a USB-to-IDE/SATA adapter and use that to connect to the computer, well it works as far as recognising that a device is connected but won't load the files or folders to view.
As I've looked around apparently the small CD drive that's inside the case has software that my computer automatically loads? Now this is where I'm lost, how do I manage to get this to work?
I'm almost at my wits end, as far as looking every single day on Amazon and eBay to buy a new one to transfer the CD drive onto the broken one to load it up and get my photos back, IF that would even work, I'm not sure.
So if you have any suggestions/help please please get in touch, thanks.

In case anyone it´s interested I restore the autorun.inf into the drive and the problem was that I put all the toshiba software into one folder to be more organized. As soon as I place it back again outside the folder (in the root of the hard drive). It grab the canvio image.
Attachments:
canvio.jpg ‏11 KB

My Macbook air flash had gone for a month and I saw Apple's Macbook air flash storage drive replacement program. I'm not sure whether that program is still available for the broken device or not. Now, I'm booting from the external hard drive. Thank you.

My Macbook air flash had gone for a month and I saw Apple's Macbook air flash storage drive replacement program. I'm not sure whether that program is still available for the broken device or not. Now, I'm booting from the external hard drive. Warranty has gone in October 2013..
I want to send back my macbook air back to apple store. The problem is that I bought it from US and now, I'm using it in Myanmar. If the program is free of charge for my device, it's worth trying to send back to US. Since mine is broken, I'm afraid Apple will take charges for reparing.
So, if anyone having the same problem as me, I would like to get suggestion....
Thank you!!

I have no idea about how to handle the international aspect of your question.
But here is the Apple writeup about the problem and the remedy. Maybe that will help you.
http://www.apple.com/support/macbookair-flashdrive/

How to backup files onto external hard drive if my MacBook's graphics card is broken?

Hello,
I have a 15" 2012 Macbook pro with 2gb of ram, i7 processor, and a 250 gb Hard drive. In the middle of using my computer, the screen went black. Upon rebooting the computer, I noticed gray and white horizontal lines running across the screen, but I was still able to see the apple logo and loading indicator in the background. As soon as the login screen appeared, the screen went black again.
Genius Bar Diagnosis:
A few days later I took my computer to the apple store to have them diagnose the computer to determine if the hard drive was corrupt or if it was just a display issue. They found that the hard drive was still functioning properly, so no information was lost. The problem was that the graphics card needed to be replaced. So they offered to ship my laptop to an Apple repair facility in Houston, Texas (nearest one to me) and replace the graphics card, as well as any other parts that seemed to be damaged, for a flat rate of about $315. They recommended that I back up my hard drive just in case they found an issue with it (despite nothing showing up in the diagnosis at the genius bar) because the technicians at the repair facility will just swap it out for a new one.
My dilemma:
The employee at the genius bar gave me a list of Apple Authorized Service Providers that could help transfer the data from my macbook's hard drive to an external hard drive. I got a quote from them for $150, plus I would have to pay for a new external hard drive because my other one is full. In an effort to save money, I want to see if there is a cheaper way for me to backup the hard drive by myself. I have a pc laptop that still works fine, so I have been using that since my MacBook Pro died on me. Is there any way I could use that other computer to somehow backup my macbook's hard drive? Or would I need another mac to do the transfer? I have looked into buying a hard drive sled, but I don't know how those work, and I may not have all of the right equipment for it. If that is something I have the right tools for, and it's cheaper after buying all the accessories, then I would much rather go that route than taking it in to get serviced at an AASP store. Please help!
I'll give good ratings to those who give me useful advice.
Thanks,
Matt

Hello mafrerichs and welcome to Apple Support Communities,
Simplest way is to use Target Disk mode:
How to use and troubleshoot FireWire target disk mode - Apple Support
and hook to another Mac and use CCC or SuperDuper and clone your HD to another drive.
You could also pull the drive out of your MBP and use an external USB case or SATA - USB dongle to hook it to another Mac.
"MacBook Pro (15-inch Late 2011),... have a 15" 2012 Macbook pro with 2gb of ram, i7 processor"
That's a little confusing?

Using an external hard drive now my time machine is broken

Hi All,
i have an external hard drive now my time machne has overheated and failed
this works fine with time machine
Is it possible for me to backup my windows pc to this external hard drive???
thanks in advance
Jason

I guess the external drive is hanging off the Mac..
Getting access to the drive from PC should be possible.. you may need to move public directory onto the external drive and then set up permissions to do it.. I have not done it and simply would not do it.
External hdd are cheap enough buy one for the pc.. That is then formatted NTFS which windows is going to natively read.. this will be much easier if the backups are ever required than to use HFS+ formatted disk hanging off the Mac.
You can also get your dead TC fixed.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repairers

Due to a broken laptop I've loaded my itunes from an external hard drive my itunes wont play unless i leave the the exteral hard drive connected. what is the problem?

My laptop working Vista H Premium broke, I now have laptop working Mindows 7 H Premium. I reloaded my itunes from an external hard drive but they wont play without the external hard drive left plugged in

The media is on the external drive. If you want to be able to play it with the extrenal drive disconnected, this will require moving or copying the media off the external drive to the computer's hard drive.
Importing the media via iTunes may automatically accomplish this, depending on the settings in iTunes.

IMovie projects have broken link after I moved file on external hard drive

I have all my iMovie projects on an external hard drive, and it was working fine...until I accidentally broke the links by going into my external hard drive, creating a folder I named "Videos," and dumping the "iMovie Project" folder and the "iMovie Events" folder (which iMovie automatically created for me) into my new folder. I was just trying to consolidate everything into one folder, but that messed everything up. Once I realized what I had done, it would not let me press undo. Then I dragged the iMovie Project folder and the iMovie Events folder back onto the main part where they originally were, and that did not fix it.
Does anyone have any tips on getting my links back? I'd be so appreciative!! I have almost 200 projects of my kids that I can't access now. I have iMovie '11. Thanks so much.

The iMovie projects and iMovie Events folders have to be at the root (top) level of the drive they are on (or at the top level of the User/Movies folder), otherwise iMovie 9 won't see them.
As long as you have not changed the contents of these folders, if you put them back at a root location they should automatically appear in iMovie.
Geoff.

Why does Finder show my external hard drive as a broken alias?

When I click on my external hard drive I get the message "The alias “External HD” can’t be opened because the original item can’t be found" with the option to fix or delete the alias. It does not let me choose the drive to fix the alias or delete if I select an option.
Both Disk Utility and Disk Warrior show no problems with the disk, but I can't access the contents.
Any ideas?
Thanks.

I had a problem with my La Cie 1TB drive, connected to my Airport Extreme. Sometimes I could view the root level (first level of folders), but clicking to the second level, all folders seemed to be empty. It was indeed the alias bit that was the culprit.
Instead of always go into Path Finder or Terminal to flip the alias bit, I made an AppleScript, compiled it into app, and put that in my Login Items (System Preferences > Accounts > Login Items). Now every time I reboot or log in again, the disk is mounted in the correct way, without alias bit.
For those who want to use it, here is the script.
tell application "Finder"
activate
if (exists disk "NETBU") then
eject "NETBU"
end if
set volumemounted to false
try
mount volume ("afp://youraccount:[email protected]/NETBU")
on error
display dialog "Error mounting NETBU." & return & return buttons {"OK"} default button 1
end try
set volumemounted to true
if volumemounted = "true" then
do shell script "sudo /usr/bin/SetFile -a a /Volumes/NETBU"
end if
end tell
Note : Replace "NETBU" by the name of your disk; replace youraccount:password by your account name and your password; replace 192.168.1.2 by the IP address of your Airport. If your disk is connected in another way, you need to change the mount statement accordingly.
Good luck !

I cannot access iTunes songs showing in external hard drive

I recently closed my dropbox account and moved its content to an external hard drive. This included iTunes songs and now the songs and related albums no longer show in iTunes when I open it up, although I can see the individual songs (but not in albums) in the external hard drive. There are a limited number of albums still showing when I open up iTunes but they are albums I have recently added to iTunes.
However I can see the albums and tracks in the iTunes media folder on my Mac internal hard drive, but they do not show up when I actually open up Itunes.I have followed advice found on this website and have tried to move my iTunes folder to the external drive so all the music is in one place, but i keep getting an 'error code 50' message appearing. I have also tried to select the individual songs on the hard drive and move them to the media folder but there are no 'albums' to move them into and they just sit there as individual songs. I have a macbook air which is one year old and a WD My Passport ultra 1TB external hard drive. I am using OSX version 10.9.5 with 8GB of memory. As you can tell from my endeavours, I do not really understand the way iTunes works and it may be that the various songs and albums in the media folder need to be organised in a different way perhaps, so that they are visible when I open up iTunes?
As I have lots of space on my external hard drive and am running out of space on my Mac hard drive, ideally I would like all my iTunes folders to be held on my external drive, as it is always plugged in to my Mac, and for iTunes to be 'pointed' to the hard drive. Any advice please?
Thanks
Elizabeth

All kinds of things going on.
About the error code. Do you men "50" or do you mean "-50"? It is critical things get reported exactly here. Error -50 is a very unhelpful generic communications error with a number of possible causes. Something between the drive to which you are downloading and the drive from which it is all coming is not working correctly, with probably dozens of possibilities. I guess one simple possibility is if this is a brand new drive it likely came formatted for Windows use and needs reformatting for Mac.
Kappy's brief drive formatting instructions (12/2012) - https://discussions.apple.com/message/20571091#20571091
Pondini: Formatting, Partitioning, Verifying, and Repairing Disks... - http://pondini.org/OSX/Home.html, specifically http://pondini.org/OSX/DU1.html
Basic workings of iTunes. When you add a file to iTunes it puts the file in a specific location designated in you Media Folder preferences setting and makes a note in a database file (library.itl) of where it put it. When you want to play the track iTunes looks up where the file should be, goes there and plays that file. iTunes does not inventory its media folder for new additions. For iTunes to recognize tracks they have to be added to iTunes either by importing, dragging to iTunes, or dragging to the Automatically Add to iTunes folder. If files added to iTunes are later moved by you in Finder, particularly to another drive, iTunes loses track of them completely and give you a broken link indicator " ! ".
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391
iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847 - plus supplemental information about organizing to new structure https://discussions.apple.com/message/26404702#26404702
Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/docs/DOC-7392 and making an iTunes library portable.
I don't know exactly how Dropbox works but basically by moving all your files instead of letting iTunes do the relocating you have broken all the links to your older files in iTunes. You can either repair them one by one, by one, by one.... or you can rebuild your library, or essentially create a new library and start over again (you did read those links I provided didn't you?). If you are prepared to start over, hold down the option key while starting iTunes. Create a new library on the external drive. Drag all your media files to the Automatically Add to iTunes folder in the iTunes folder on that drive.

I need help to repair my external hard drive

(1) My External Hard Drive finally stopped working. Whenever I tried to use it, I would only get variants of, "Time Machine couldn't complete the Backup to "My Passport for Mac", or "The backup disc is not available".
(2) "No problem," I thought. "There is no problem with my computer, so I'll just buy another external hard drive," and I did.
(3) About this time, I partitioned my computer hard drive to enable me to run both Snow Leopard and Mountain Lion. I did this with step-by-step instructions by Apple technicians.
(4) I now find that I have lost a considerable number of files, including those that I value most highly.
(5) I now find that I need the files in my old, abandoned external hard drive, and it seems to me that the easiest way to access those files is simply to repair it.
(Here's what I've tried so far: (1) Disc Utility Repair. Didn't help. (2) COMMAND-R start. This produced a window with the following entries: Restore from Time Machine Backup, Reinstall OSX, Get Help online, Disk Utility. It seemed to offer hope, but I couldn't highlight any of them, and the "continue" command was dimned out. Where do I go from here? Data recovery is the solution usually offered, and I've alwys wondered why. It seems to me that fixing the external hard drive should always be the first thing to be considered. Data recovery is expensive, and fixing the external hard drive might be cheap.

baltwo wrote:
I don't think the HD's broken. More likely, since you used it for TM, that's what causing your issues. However, since I don't use TM or ever use WD's crappy HDs, all I can suggest is to peruse Pondini's TM FAQs for starters. Then, check out his troubleshooting steps.
What is "WD"?

External Hard Drive doesn't work after Time Machine cancelation

First post on the forum.
So far i've had 2 hard drives broken because of a simple Time Machine.
I own a MBP and an HP so my hard drives usually have 2 partitions, one for mac, the other for pc. About a month or so i was doing a Time Machine on my Iomega 1TB (the partition used for the time machine is formatted in Mac Os Expanded (with journaling)), and, because the time machine was extremely slow i stopped it. Then came the problems. I tried to connect the Iomega to the mac, but the partition in which i had the time machine doesn't mount. the other partition is mountable and i even managed to delete some files in it, so it worked. But now the partitions don't mount. I can still see the two partitions in Disk Utility, with the correct names i gave them, but cannot mount.
Right now i don't have the disk with me because i went to a "professional" to try and at least recover my files. What a joke that was. First they told me they had my recovered files and them the files were not mine. The switched the disks and gave me someone elses files. And now they ask me for 1100$ to recover my files because it is a hardware malfunction. Obviously i dont have that amount of money available and i cannot afford the recovery atm, and i do not believe that a software can cause hardware to fail. (just guessing)
Resume: 1 external hard drive, with 2 partitions, one mac os expanded and the other is a Windows NT Filesystem. None of the partitions are corrently mounting on mac but the disk utility recognizes the partitions and the names i gave them.
So guys can u help a poor little girl that needs her photographies so that she can go and show her portfolio to get a job. :/
Kinda desperate at this point.
ps: sorry for bad english, second language

One can't read the other.
Just to be clear Mac's can read/write FAT32 but windows cannot use OS X Extended. So to use a drive on both systems it needs to be formatted FAT32
FAT32 does have limitations and possibly the best solution is to use NTFS, a more modern, robust filesystem. The drawback here is that OS X does not natively read NTFS so a third party kernel extension is needed.

How to maintain playlists with an external hard drive

My music folder is on an external hard drive. I turn on the HD when I need to add Music, then I re-sync. The problem is that the playlists all empty when the hard drive is turned off. How can I make a persistent playlist that is maintained whether or not the HD is connected.
FYI: To create a list, I use select the songs and then use File -> New Playlist from Selection.
Thanks,
Marc
80 GB Windows XP

playlists are in the itunes.itl file
I Believe they are static links that is why if the files are not found then links are broken. This is also why if you move or rename the files iTunes loses track of them.
If you mean manual manage sync when you said manual maintenance then that should work.

Error code 36 (problems with external hard drive)

I have just upgraded to Yosemite and am now having major problem with my external western digital hard drive. I cannot create new folders and when I hit command N I get error code 36. I also cannot move files from one folder to the next. When I try to move them I get the error message: "The operation cannot be completed because a file of that name already exists" and that simply isn't true. None of the files' names exist in the other folder.

Ok, It appears to be the fault of Western Digital. I ejected the hard drive and then plugged it back in and it said that the drive was broken but I could still read the files and it told me to save the files on another disk and reformat. So it was just a coincidence that I upgraded to Yosemite at the same time that my external hard drive broke.

Restoring using an external hard drive help

Ok so.. ive recnelty received my mac back from apple, after javing the hd replaced. To prevent the loss of all of my stuff i bought an external hd and used this as my time machine backup, so now its all on my external hard drive. The problem ive got is that ive got no idea how to restore my mac using the extermal hard drive so its like it was before it was sent off. ive been told one option is to launch my mac in recovery mode and choose to restore using. my external hard drive there. however i cant access recovery mode because i have a wireless keyboard, and the only wired keyboard i have is a windows one. also, to make matters worse, i cant use any discs because my optical drive is broken, so until i receive my extermal one, discs are also out. of the option.
any other ways to do it?
thanks!

RomeoVersace wrote:
http://support.apple.com/kb/HT4889?viewlocale=en_US
Try this, your going to be using a program called Migration Assistant to restore data from a different computer's Time Machine. Your computer is a different computer now because of the new Hard Drive, so instead of entirely recovering the Operating System, this will save time and data by allowing you to choose individually what you want to restore and what you don't want to.
Do not use Migration Assistant, instead you will use Setup Assistant (which starts automatically when you first start your Mac) if you already started you Mac and added a user then you will have to use MA, but you will need to remove a user afterwards.

Broken External Hard drive

Similar Messages

Maybe you are looking for