Broken Image on SSo Logout Page

Hi, I'd implemented SSO as Partner Application on an HTML DB application. Everything works great, except for the Status Image on the Logout Page, that is not been showned correctly.
How can I fix this problem. Is this a setting on the SSO Server, or is it an HTML DB issue?
Regards.

Ah, ok. That will be a great solution in case I want to customize the images on that page.
But I just want to use the standard solution with the standard icons. I'd looked at other Oracle applications and I believe that icon is called "osso_logout_success". Do I have to set sth. on the SSO Server in order to view it correctly?
Regards

Similar Messages

OAM 11g Webgate 10g customized SSO logout page

As stated in the title, I am using OAM 11g and Webgate 10g. I am trying to create a customized SSO logout page but am confused on a few parts. First off, in http://docs.oracle.com/cd/E17904_01/doc.1111/e15478/logout.htm#CHDHFGJC , it states the following step for their logout.html:
Logic in logout.html redirect to the OAM Server. For example:
http://myoamserverhost:port/oam/server/logout?end_url=http://my.site.com/
welcome.htmlMy question is if this is truely required? Or is there a way to have OAM invalidate the session and do its internal part of the logout procedures without needing to force the user to redirect to the OAM server's logout URL (eg: it automatically recognizes that the Webgate URL is "...../logout.html" and handles it properly). From talking to colleagues it sounds like this should be possible, and I see some mentions of it in the above documentation, but this appears to be 11g OAM and 11g Webgate behavior. At the same time though, the line "Logout is initiated when an application causes the invocation of the logout.html file configured for any registered OAM 10g Webgate." Leads me to believe that it can work with 10g webgate as well.
Or, is there a way to have multiple valid logout pages on the OAM server? (There is currently a customized logout page that we cannot modify, and does not meet all the requirements we have for look/feel)
Thank you
Edited by: mBaldwin on Apr 12, 2013 10:30 AM

Bump Any ideas?

Dreamweaver Broken Images (not on my page, the program its self)

Dreamweaver is displaying broken images on every single
button. I'm not talking about on pages that I'm editing using DW,
I'm talking about the DW program its self. The refresh button on
the FTP browser is blank, all the buttons on the left side of the
page I'm editing just appear as broken images.
All the buttons still work fine, it's just rather annoying
having to edit blindly like this.
Any ideas?

Hey, i am having the same problem,
One image will appear fine, but the rest of the images will
not, and i have tried importing the other images various ways,
using the image and image placeholder methods, also drag and drop
into tables etc. from widows explorer though they either come up as
broken images, or actual file name hypelrlinks, and then when you
save and go to preview the page, you click the link, but only comes
up with a white box with a red cross.
So im not sure what the reason is behind some of the images
not showing up.
It must be the images, as i have made the original images
which are .jp[g into thumbnails in photoshop, and then saved them
as .jpg.
I also made a completely new image and saved it as .jpg and i
imported it into dreamweaver.. so it must be the batch or type of
files. no idea ??
does anyone have any other clue of why they don't import into
dreameaver or ways around it, as the files im working with are
photos, so i can't save them as gif, they will be of poor quality,
but will try png and see the result.
Thanks.

Why the sign-off page Not Displayed when I do SSO Logout ?

Hi All,
I am using Oracle SSO 10.1.4.1 and OID 10.1.4.1 and registering our ADF application to participate in the SSO.
When I call SSO Logout from the web application with this URL :
http://myserver:port/pls/orasso/orasso.wwsso_app_admin.ls_logout?p_done_url=http://myserver:port/portal/page/portal/myPORTAL
It just do the Logout "Silently" and then redirect to http://myserver:port/portal/page/portal/myPORTAL.
Doesn't it should firstly display a page that shows the list of all application that will be logged-Off ?
Why that sign-off page does not get displayed ?
Thank you for your help,
xtanto

Looking at the product version you mentioned, I assume you are referring to Oracle Access Manager. When you configure a Logout URL, it will just end the session by killing ObSSOCookie and take you to the Logout URL as specified by the Administrator. OOTB, it wont be able to display the list of the applications you will be logged off from. This needs custom development to achieve what you are expecting. First you need to find out what all applications the user is logged in or to what all applications the ObSSOCookie session is passed and then display them on the Logout URL.

SSO Logout Status

I am currently using SSO for authentication and it is functioning properly except the checkmark image does not show on the logout page for the partner application name that was created for APEX. If i am logged into other AS instances running SSO (portal), the checkmark does show for them. Not sure if it is the SSO partner app config or sso logout url. Thank you for any information.
Logout URL on SSO is : wwv_flow_custom_auth_std.logout_then_go_to_url?p_args=&APP_ID.:http://server/pls/orasso/orasso.wwsso_app_admin.ls_logout?p_done_url=http://server/pls/apex/f?p=app:page
Robert

Robert,
Logout URL on SSO is : wwv_flow_custom_auth_std.logout_then_go_to_url?p_args=&APP_ID.:http://server/pls/orasso/orasso.wwsso_app_admin.ls_logout?p_done_url=http://server/pls/apex/f?p=app:page
That's the link that appears on the Single Signout page? It should be a fully qualified URL, at least. And it cannot have substitution item syntax like &APP_ID.. But if all you want to happen when the Single Signout page is shown is for a nice checkmark image to appear then just get the login server admin to change your application's partner application registration to use the logout URL of one of the other partner applications for which a checkmark does appear. Either that or create a checkmark image in your images directory and put a link to that in the registration form.
If you want that logout link to actually do something (unset cookies, etc.), you'll have to do more work, but I don't see any extra benefit of doing that -- once the Single Signout Page is done your users will have to re-authenticate to use your application.
Scott

JSESSIONID not deleted during SSO logout

We have a ADF/Struts webapp on OracleAS 10.1.2.0.2 protected by SSO (mod_osso). When a user logs off from SSO, all a success mark is shown from each partner app where the user was logged in (including our application), but the remains logged in to the webapp nevertheless.
I have tracked the problem down to the JSESSIONID cookie, which causes the user to be logged in the application as long as the cookie is present. All the strictly SSO-related cookies are deleted during the logout except the JSESSIONID for the SSO partner webapp. The user is always correctly logged out from e.g. OIDDAS after logout.
After logout, if I go and destroy the cookie either by manually deleting it from my browser or by closing the web browser, mod_osso shows immediately the SSO login page. i hav also verified by tracing the HTTP traffic that it is the JSESSIONID cookie that causes this behaviour.
In Metalink article Note:258200.1, it is said that JSESSIONID cookie is not directly related to SSO so why is it a key factor when deciding whether a user actually is logged off from the application? Furthermore, the metalink article clearly states that the JSESSIONID cookie is deleted during logout (which is not the case).
As far as I remember, we have never been able to see it working in our setup.
Can mod_osso/SSO/whatever be configured do delete the JSESSIONID during the SSO log off or what would be the correct way to get the logoff working? Furthermore, shouldn't mod_osso actually ignore the JSESSIONID cookie and only care about the SSO-related cookies when deciding whether to allow the user in?
TIA,
Markus

We solved the problem by implementing a Servlet filter that takes care of invalidating the user session if the user has logged out (either explicitly or through Global User Inactivity Timeout).
The solution follows the guidelines described in
Oracle Identity Management Application Developer's Guide section "9.4.1 Single Sign-Off and Application Logout" (http://download-uk.oracle.com/docs/cd/B14099_19/idmanage.1012/b14087/mod_osso.htm#BJFGAGIA)
IMHO, the solution is a bit overkill, but it solved the problem. We haven't yet tried the solutions proposed by Rodrigo.

ApEx SSO logout

Hello everyone,
I need ApEx to authenticate via Single Sign On (SSO). I am able to login to ApEx via SSO but logging out fails. I am properly routed to my logout page but an actual logout does not happen.
I followed instructions per Metalink Note 562807.1, "Configuring an APEX Application to Use SSO With SDK in Separate Schema". After searching the web, it appears that other people are having the same problem but I have not seen a posted solution.
I am using ApEx version 4.0.2, and Oracle's Application Server version 10.1.2. ApEx is installed in an Oracle 11.2.0.1.
Has anyone had this problem or does anyone have some information that may help guide me past this logout issue?
Nate

I have found that two procedures will log my application out of SSO (Single Sign On).
1) wwv_flow_custom_auth_std.logout - This procedure does sucessfully log me out of SSO but it does not bring an application back to the SSO login page.
2) wwv_flow_custom_auth_std.logout_then_go_to_url - This procedure seems to work better than the above procedure with SSO. This procedure logs an application out of SSO then redirects the application to a page of your choice, in my case, the SSO login page.
Procedure wwv_flow_custom_auth_std.logout_then_go_to_url is used as follows:
wwv_flow_custom_auth_std.logout_then_go_to_url?p_args=&APP_ID.:http://<IDMANAGEMENT_SERVER>:<IDMANAGEMENT_SERVER_PORT>/pls/orasso/orasso.wwsso_app_admin.ls_logout?p_done_url=http://<APEX_MACHINE_NAME>/pls/apex/f?p=&APP_ID.Note:
Your ApEx operation must to be registered with SSO

SSO logout not working properly (cookie remains set)

Hi, I've just implemented single sign-on authentication for my APEX 2.2 applications with help of these two howtos:
http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html#INSTALL
http://becomeappsdba.blogspot.com/2007/01/apex-apps-configure-sso-ii.html
It quite works smoothly, e.g. for pages that require authentication the user is redirected
("Redirecting to the Login Server for authentication...") to the SSO server (another machine, a part of Oracle Collaboration Suite infrastructure). There on the login screen, the user enters the credentials and after submit (if the credentials are OK) is redirected back to the APEX application as an authenticated user.
When the user clicks "Logout", the application redirects him (her) to the page specified in the "Logout URL" attribute of the SSO authentication scheme and the displayed username changes to "nobody". So far so good.
However, the problem is that the user is in fact not logged out. On a subsequent attempt to get to an authenticated page within the same browser window the application displays for a short while "Redirecting to the Login Server for authentication..." but it doesn't really get the user to the SSO logon screen to enter username and password and instead it redirects him (her) directly to the required page as the previously authenticated user (the user who clicked the "Logout" sign). The only workaround is to close the browser window and start over again as the other user, which is not very convenient nor secure. It seems that despite the seeming logout the cookie remains set and I don't how to force the application to get rid of the cookie upon logout.
Has anybody faced this behaviour and has some assistance for me?
Thanks in advance.
Zdenek

Scott,
thank you very much for your prompt explanation and pointing to the right thread. There, I was able to quickly find what I was looking for - the logout URL:
https://host:port/pls/DAD/wwv_flow_custom_auth_std.logout_then_go_to_url?p_args=&APP_ID.:https://login.yourlogin.com/pls/orasso/orasso.wwsso_app_admin.ls_logout?p_done_url=https://host:port/pls/DAD/f?p=&APP_ID.:PUBLIC_PAGE
Having that, it took me just 5 minutes to adopt it to my conditions (change machine names & page number), paste it to the SSO authentication scheme's logout URL field and sucessfully test it.
To summarize for others in need, these are relevant links to this topic:
Re: Partner Application in SSO logout does'nt synchronize
SSO authentication
Logout URL for 9iAS SSO Partner App
Thanks again & appologies for asking this question without preceding proper searching for answer in this excelent & useful forum.
Zdenek

SSO logout issue with APEX

I am trying to resolve the logout URL issue with our APEX application configured as a partner application with SSO. The partner application name is SSO_APEX and the logout URL is defined in partner application as
http://OID_Server:7777/pls/orasso/orasso.wwsso_app_admin.ls_logout where OID_Server is our OID server name.
In the APEX application page, I tried to open the application that was imported from another apex server.
Home>Application Builder>Application 107>Shared Components>Authentication Schemes
SSO_Auth - current is
&INFRA_NAME./pls/orasso/ORASSO.wwsso_app_admin.ls_logout?p_done_url=&SERVER_NAME./pls/htmldb/f?p=&APP_ID.
The logout link is http://INFRA_NAME:7777/pls/orasso/ORASSO.wwsso_app_admin.ls_logout?p_done_url=http://SERVER_NAME/pls/cms/f?p=107 , The application is retrieving the INFRA_NAME and SERVER_NAME values from a database table and they correspond to the OID and 10g application servers respectively.
The logout link should take it to the login page where the user will be prompted to enter login credentials again however it is currently taking to the above logout link page from APEX. It is not changing even though I specified a different logout link in partner application page. Moreover the check box beside SSO_APEX in the logout page is unchecked.
The authentication scheme of application is overriding the partner application configuration. How can I make sure the logout is actually happening? Thanks in advance for any suggestions.
Pavan.

Scott,
I am having the same issue, and have posted on another thread about this same thing. I know that's inappropriate to post the same thing in multiple threads, but I was searching the forum again today, and Pavan described exactly what I'm experiencing.
We have been using SSO for about 4 years or so now, and haven't had logout issues. Our DBA at the time had written his own logout function for SSO where he invalidated the cookie with owa_cookie calls. It's worked until now. We have upgraded our database servers and all URLs referencing those servers are now in a different domain than our OAS server. Now the logic in the logout function is no longer invalidating the cookie for SSO (because it's in a different domain). SSO login and authentication still work, it's just the logout that does not.
I'd like to just alter the logout URL to redirect to the OAS server for logout as you described. But here's what's happening. I press logout link, and it takes me to the OAS Single Sign-Off page where it shows the services it's logging you out of, but it doesn't automatically redirect (just sits there until I press the Return button).
Is that expected (no automatic redirect)?
And as Pavan mentioned, the Partner application name (APEX_SERVERNAME_SSO) doesn't show a checkmark next to it. If I go back to my application, I get right back in without being prompted for SSO (ie, not logging out successfully then).
I know there are a lot of question marks here, but I'm not sure if there's something obvious I am missing or if there's something else I need to fix that I don't know about.
Can you offer any guidance?
Thank you for your time,
Chris

Opens Webmail login page instead of sso login page after changing the webma

Hi Gurus,
I have setup notes webmail in portal which uses SSO. I login to portal and click the webmail link which opens the sso page for authentication(Cuz I have integrated the webmail to use SSO). I enter my username and password. Then it shows my emails, inbox..etc. I logout of portal, Go to Notes client on my PC and change my webmail password there. I go back to portal and log in and click the webmail link on the portal. Cuz I have changed the webmail password, I expected that it will open the SSO page and ask me to enter the password again. It didn't happen. Instead of opening eh SSO login page, It opens the Webmail login page with an error saying "Invalid User Name or Password". I am wondering why it opens the webamil login page instead the sso login page. I can still login to webmail If I enter the user name and new password. But it doesn't update the webmail password which is stored in the SSO. Please post a reply if you have some idea about fixing this.
Thanks
Raj
-------------

Hi Gurus,
I have setup notes webmail in portal which uses SSO. I login to portal and click the webmail link which opens the sso page for authentication(Cuz I have integrated the webmail to use SSO). I enter my username and password. Then it shows my emails, inbox..etc. I logout of portal, Go to Notes client on my PC and change my webmail password there. I go back to portal and log in and click the webmail link on the portal. Cuz I have changed the webmail password, I expected that it will open the SSO page and ask me to enter the password again. It didn't happen. Instead of opening eh SSO login page, It opens the Webmail login page with an error saying "Invalid User Name or Password". I am wondering why it opens the webamil login page instead the sso login page. I can still login to webmail If I enter the user name and new password. But it doesn't update the webmail password which is stored in the SSO. Please post a reply if you have some idea about fixing this.
Thanks
Raj
-------------

Spry Photo Gallery Broken Image Link

I have attempted to merge the spry photo tutorial with our church's website. The images simply won't show up. It shows a broken image icon, but I can't understand why. I am wondering if the menu bar's javascript is interfering. Here's the code:
Photo Gallery Page:
http://gtcdunn.org/GTWebsite/HTML/Gallery1.html
XML
http://gtcdunn.org/GTWebsite/photos.xml
Spry Assets:
http://gtcdunn.org/GTWebsite/SpryAssets/xpath.js
http://gtcdunn.org/GTWebsite/SpryAssets/SpryData.js
Thanks so much for your help!
~Chris

I see you are still using Spry 1.5. Have you considered upgrading to
Spry 1.6.1?
Also your XML is broken, if you open up your xml in a normal standards
complaint browser such as firefox, you will see that it doesn't render
a normal tree view as it would do with other xml files. So i suggest
checking those errors out.
Its mainly because you forgot to close your starting tag of the
gallerys node. (<gallery
base = ""
background = "#FFFFFF"
banner = "#F0F0F0"
text = "#000000"
link = "#0000FF"
alink = "#FF0000"
vlink = "#800080"
before your xml starts.

CF8 Multiserver IIS6-Jrun Broken Images

Hello All
We have run into a problem with the multiserver install of
CF8 Enterprise Edition. I would appreciate any insight into it.
Server details:
Web Servers
IIS 6.0 on Windows 2003 Server
Use the JRun connector to communicate with CF servers (.cfm
.cfml .cfc .cfr mapped to jrun_iis6.dll)
CF 8 servers:
CF8.0.1 Enterprise edition; on windows 2003 server; 1 cluster
of 2 instances; running the proxy service on default ports (51000,
51002 and so on),
We want to use the reverse proxy for every type of file for
specific virtual directories on the Web server. This includes, .js,
.css, .gif, .jpg files.
Problem:
The coldfusion specific file formats are proxied to the CF
servers without a problem (since an IIS mapping exists for each of
them). However, for the static file formats it does not work
(broken images, missing .css files etc.)
We have observed that:
a) if there is no extension mapping on web server, IIS 6.0
sends a 404 message for the images on the page
b) if there is an extension mapping to the same jrun_iis6.dll
on the web server, we get a 503 error from the CF server
(Indicating no mapping on the CF server)
c) if in addition to (b), we introduce a url-pattern mapping
in web.xml, and associate it with CfmServlet, we start getting the
content of the image in a stream (Server response = 200 ) but with
incorrect content-type (it comes across as text/html). The images
still appear broken because the content-type is incorrect.
At this point, we are at a loss of what we are missing.
Has anyone run into this problem before... any pointers will
be much appreciated!
Regards
Kev

deepblue9999 wrote:
> We want to use the reverse proxy for every type of file
for specific virtual
> directories on the Web server. This includes, .js, .css,
.gif, .jpg files.
>
> Problem:
> The coldfusion specific file formats are proxied to the
CF servers without a
> problem (since an IIS mapping exists for each of them).
However, for the static
> file formats it does not work (broken images, missing
.css files etc.)
> c) if in addition to (b), we introduce a url-pattern
mapping in web.xml, and
> associate it with CfmServlet, we start getting the
content of the image in a
> stream (Server response = 200 ) but with incorrect
content-type (it comes
> across as text/html). The images still appear broken
because the content-type
> is incorrect.
Very close. You need to map the extensions to the
FileServlet, not the
CfmServlet. Then restart CF and you are in business. You can
even remove
the mappings in IIS, the mappings in web.xml will overrule
them anyway.
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion

Images in a web page

When I paste jpeg photos into my web page, they are grayed, I
can't see the images. Can someone tell me why?

SHow me the page, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"namelessafk" <[email protected]> wrote in
message
news:e3qr5c$2jh$[email protected]..
> I'm having the same problem.
>
> What's happening is that I'll create the images in
Photoshop then save
> them to
> the same folder as all of my other website image files.
Then I'll go to
> Dreamweaver, select the table section that I want the
image to occupy, and
> insert > image, then choose the image. The image
won't come up tho, it
> will
> show it as a broken image file. If I place it in the
background, then the
> section will be grayed. Now, I KNOW that the image is
there and that the
> path
> is correct so why is this happening??
>

Google Images Not Showing past Page 1

Since installing FireFox 4, I have received a Google Redirect Virus, that I finally fixed after weeks of research AND, I can only see images in the 1st page of search results.
I see that there are multiple pages available but the images are grayed out.
I've seen many others having these same problems since installing FireFox 4. WOW, are you serious!
Can anyone fix this problem?

Frankly, I'm am totally confused how this many problems can come from a FireFox upgrade.
I'm a graphic designer and I use Google as my primary source for information that aids my design work. Having a Redirect Virus and a Broken Images Search has seriously destroyed last month of income.
I'm currently trying to purchase my first house and losing out on the jobs I was trying to get has made that nearly impossible.
I am really hope you guys can fix this because I can't work with it as it is. Also, I was totally wiped out when that Redirect Virus hit my computer. No Work, No Income and for WHAT?
You firefox people need to not ruin peoples lives with your updates!

Blob in classic report - broken images in translated application

Hello,
I have an application containing a classic report with a blob column displayed as inline images. The application's UI is translated and published (from en to de in my case) according to APEX docu. Everything seems to work fine so far but all classic reports with blobs show broken images in the translated application.
The report query is something like:
SELECT IMAGE_NAME,
        CATALOG_MIME,
        CATALOG_FILENAME,
        CATALOG_LAST_UPD,
        ID,
        dbms_lob.getlength(CATALOG_IMAGE) CATALOG_IMAGE
FROM    IMAGE imgThe images are displayed by using the format mask "IMAGE:....inline" on the CATALOG_IMAGE column and the generated image URLs (<img src="...">) look like this:
In primary language (App ID 251, working): http://server/pls/apex/apex_util.get_blob?s=724178467531162&a=251&c=6844840372320206&p=5305&k1=288447&k2=&ck=7475F2F4A0CFA99CC137C9F9008CE3F9&rt=CR
In translated app (App ID 151, broken images): http://server/pls/apex/apex_util.get_blob?s=724178467531162&a=251&c=6844840372320206,151&p=5305&k1=288447&k2=&ck=4576169EC6C9645C83E321610FE4BE6B&rt=CR
Also by entering the broken image URL directly the server says: "The requested URL /pls/apex/apex_util.get_blob was not found on this server."
Is this a bug in APEX (using 3.1.2), anyone else encountered this? Is there a solution or workaround?
Thanks for infos,
Stefan

Follow-up by myself:
I found a workaround for this by using the apex_util.get_blob_file_src function instead of declarative blob support. The code generated by this seems to work also in the translated application.
Btw, the original problem remains in APEX 3.2, as just tested at apex.oracle.com. I've made a test comparing declarative blob support to apex_util.get_blob_file_src in the sample application in my workspace (SMEINDL), application id 50912, page 3 (products). If anyone is interested, please have a look at it.
Stefan

Broken Image on SSo Logout Page

Similar Messages

Maybe you are looking for