Browser-based PI sheet - Export parameters
Hi All,
I'm working on browser based PI sheet.
I have a custom function module with characteristic PPPI_FUNCTION_NAME linked to a Process message.
I'm not able to add a new export parameter and table parameters (for repeated data request).
Only an export parameter at the moment has been defined:
Characteristic Characteristic value
PPPI_EXPORT_PARAMETER PROCESS_ORDER
PPPI_PROCESS_ORDER
The new export parameter should be linked to another process message, defined as below:
Characteristic Characteristic value
PPPI_VARIABLE VAR_REQ_BATCH_DENSITY
PPPI_REQUESTED_VALUE ZPPPI_BATCH_DENSITY_BLEND
Table parameters with Material data for repeated data request should be linked to a process message defined as below:
Characteristic Characteristic value
PPPI_INPUT_REQUEST Material
PPPI_REQUESTED_VALUE PPPI_MATERIAL
PPPI_INPUT_REQUEST Actual use:
PPPI_REQUESTED_VALUE PPPI_MATERIAL_CONSUMED
PPPI_INPUT_REQUEST UoM:
PPPI_REQUESTED_VALUE PPPI_UNIT_OF_MEASURE
PPPI_INPUT_REQUEST Batch:
PPPI_REQUESTED_VALUE PPPI_BATCH
PPPI_INPUT_REQUEST Storage Loc:
PPPI_REQUESTED_VALUE PPPI_STORAGE_LOCATION
Thanks in advance.
Regards,
Gabriele
Hi,
Use Characteristic PPPI_PHASE_SHORT_TEXT as a Out put characteristic in your PI category.
Regards,
Dhaval
Similar Messages
-
Guide to create Browser-Based PI Sheet in ERP Release 5.0
Hi everybody,
I tried to change the type of control recipe destination without success. Who can help me to configure the system? I'm looking for a guide line for example. I already read Help on SAP (Setting up the browser for PI sheets and cockpits, Control recipe destination ...) But there are not so much informations
Thanks a lot
JohanHi, if i change process recipe destination type to1 (abap pi sheet) in o10c, then there is no issues. control recipe is successfully created. if i maintain the same to 4 (browser based pi sheet) in o10c trx, then i am getting the error message as "syntex error found for distination". please advise.
-
By-product handling in Browser based PI sheet.
Hi PP Gurus,
Could anybody please explain how to handle By-product scenario in Browser based PI sheet? I know PI_CONS and PI_PROD are the two standard Process message categories for GI and GR respectively. But I'm not getting, where exactly By-product will be covered?
Thanks & Regards,
Abu ArbabHi Ratan/Brahmaji,
I'm sorry if I misinterpreted issue. The actual thing is say Process order 1000 is there which is having one component RM-1. In process order 1000, I've not mention any by-product. Now control recipe generated at the time of Process order release. I could see PI Browser based PI sheet in CO60 transaction code. From configuration, PI_CONS is the process message category that I assigned to Process instruction category. Now when I'm filling PI sheet in Edit mode and trying to post a by-product with -(negative) sign after quantity in PI sheet and trying to complete the PI sheet, system is not accepting the entry for by-product. Moreover when I'm removing -(negative) sign after quantity for by-product, system is posting it as GI and in transaction code CO54 when I tried to post the message that time it's throwing an error of Deficit stock for by-product.
So what's the way to come out of that? Please help.
Thanks & Regards,
Abu Arbab -
Hi Gurus,
Can anyone please explain me what are Browser based PI sheets and how to configure them. Thanks in advance and due points will be awarded.Step A
1. You have to create the PI instruction category in customizing T code O12C
2. Create characteristics CT04
3. Assign the characteristics to PI instr category O12C
4. While creating Master recipe, assign the PI instructions categories you want to use.
Step B
After creation & releasing process order create control recipe.
then go for T code- CO 53 - send control recipe(control recipe monitor)
http://help.sap.com/saphelp_46c/helpdata/en/f3/6ee4117aed11d2a5fe0060087d1a6b/content.htm
CO60 - Operator will enter the values
CO54 - send process messages
http://help.sap.com/saphelp_46c/helpdata/en/ac/6a101268ce11d2a67600104b57eaa3/content.htm
CO55- Check the report.
Transaction CO57, to trigger manually a process message with message Category PI_CRST for the process order and Control reciepe combination.
Then use Transaction CO54 to send the Message to the process order
Reward points if it is useful
PPR PP -
Steps for Browser based PI sheet.
Hi PP Gurus,
I'm working on Browser based PI sheet first time. Can you please extend your help by providing the steps and configuration to be done to achieve the same in PP-PI-PI sheet scenarios?
Thanks & Regards,
Abu Arbabclosed
-
BROWSER BASED PI SHEET INPUT FIELDS NOT EDITABLE.
Hi Gurus,
I am working on browser based PI sheet. I am able to generate PI sheet but input fields for Browser based PI sheet are not editable. I can not post my entries in T. Code:CO60.
This is happening to all recipe Groups also.
Please give inputs. Thanks in advance.
Regards,
PradeepHi Dhawal,
I am using process Instruction Type 0 (Universal Type) for Process Instruction Category.
I am using browser based PI sheet. It is getting generated but I am unable to Put information in Input
fields to post data.
When I see error logs I get following Error:
Data transfer to the server: data contains error.
I am not using PI category 7 in master Recipe.
Same settings I am using in another client and it is executing. But for this server I am facing Problem.
Can I have your contact no. so we can discuss in detail.
Pradeep
9820969465
Edited by: PRADEEP on Mar 20, 2009 4:54 PM
Edited by: PRADEEP on Mar 20, 2009 4:56 PM -
Cor6 jump in browser based PI-sheet
Dear SAP experts, I am using browser based PI-sheets and trying to call cor6 transaction from the PI sheets. I am using the characteristics in the order below which i think it is ok. the issue I have is that i get the PI sheet generated, i get the bottom displayed on the browser PI sheet but when clicking on the buttom it does not trigger me to the COR6 transaction. Do you know why
1 PPPI_FUNCTION_NAME COPF_ENTER_CONFIRMATION
2 PPPI_BUTTON_TEXT Enter Proc. Order confirmation
3 PPPI_FUNCTION_DURING_DISPLAY allowed
4 PPPI_EXPORT_PARAMETER PROCESS_ORDER
5 PPPI_PROCESS_ORDER
6 PPPI_EXPORT_PARAMETER OPERATION
7 PPPI_PHASE
8 PPPI_EXPORT_PARAMETER TCOD
9 PPPI_TRANSACTION_CODE COR6NHi Ratan/Brahmaji,
I'm sorry if I misinterpreted issue. The actual thing is say Process order 1000 is there which is having one component RM-1. In process order 1000, I've not mention any by-product. Now control recipe generated at the time of Process order release. I could see PI Browser based PI sheet in CO60 transaction code. From configuration, PI_CONS is the process message category that I assigned to Process instruction category. Now when I'm filling PI sheet in Edit mode and trying to post a by-product with -(negative) sign after quantity in PI sheet and trying to complete the PI sheet, system is not accepting the entry for by-product. Moreover when I'm removing -(negative) sign after quantity for by-product, system is posting it as GI and in transaction code CO54 when I tried to post the message that time it's throwing an error of Deficit stock for by-product.
So what's the way to come out of that? Please help.
Thanks & Regards,
Abu Arbab -
Transfer to browser-based PI sheet
Hi,
I am working with PP-PI industries, and I have create first time Transfer to browser-based PI sheet
I want to know,
How the values add in PI sheet via operator?(These sheets not allow adding any value)
How can change the status of PI sheet?
Pl helps me for finding the solution.
Regards
RajeshHi Rajesh,
Your question "How the values add in PI sheet via operator" is not very clear... I cld understand you want to add certain values in the PI Sheets using some formulas or You are asking abt the value addition to the process because of PI Sheet usage.
Secont, The status of PI Sheet...usuallu "Inprocess , Processed, new"will be the statuses...
New - Newly created PI Sheet
In Process - you have entered some values in the PI Sheet...But not completed the PI sheet by clicking the "Complete" button at the top of the PI Sheet..
Processed - U have completed the PI Sheet,,by clicking the "complete" button in the PI sheet.
Sometime you ll see yellow or red warnings in the status..This means the PI messages ( the data entered in the PI Sheet) is still pending ( not send to the Process message destinations) destination can be functional modules which will perform Normal Transactions .
Warning will araise for locking conditions...ex. process order in change mode is active so system cld not perform the transaction.
Red message indicates errors..
You can see the ststus & the log in CO52 ( process message monitor) transaction.
Please come back with your exact query
Thanks & regards
Mahesh babu
Reward points if useful -
Hi Gurus, in o10c I maintained process recipe destination type as 4 (Browser based pi sheet). when i click on "crate control recipe" icon in cor2 (after release) getting the error message that "Syntax errors were found for control recipe destination 01". please advise whay need to be done. thanks.
Hi, if i change process recipe destination type to1 (abap pi sheet) in o10c, then there is no issues. control recipe is successfully created. if i maintain the same to 4 (browser based pi sheet) in o10c trx, then i am getting the error message as "syntex error found for distination". please advise.
-
Browser based PI sheet configuration
We are currently using "transactional " based Pi sheets and would like to consider using Browser "Web" based Pi sheets. We are having a hard time finding information on the configuration changes necessary to implement this changes. Can any one outline what needs to be configured/implemented in order to use this functionality?
Hi John,
The difference between ABAP based pi sheets & web based pi sheets are captured in SAP through <u><b>control recipe destination type.</b></u>
1. Define the control recipe destination, use the following menu path
Process Management by choosing Control Recipes/PI Sheets -> Define and Set Up Control Recipe Destinations.
2. In the above activity set the <b>destination type</b> as " 4" - transfer to browser based PI sheet, This control recipe destination is an operating group for the R/3 PI sheet that is displayed in HTML layout on the screen.
There are few prerequisite for settin up browser based PI sheets with regards to internet explorer settings,
1.In the Internet Explorer menu, choose Tools -> Internet Options.
2.Choose the Security tab page.
3.Choose the Web content zone Internet.
4.Choose Custom Level ...
5.Make the following settings in the Security Settings dialog box.
Function Settings
Download signed ActiveX controls Enable or prompt
Launching programs and files in an IFRAME Enable
Navigate sub-frames across different domains Enable
Hope this helps.
Reward points if found successfull.
Thanks!
Regards
Ramanathan G. -
Browser based PI sheet functionality
hi all
as far as i tried i was getting batch determination option in abap based pi sheet but same option i could not get in browser based pi sheet. same in abap based pi sheet Immediately after saving the consumption option in one phase system is asking for a report of message and we can send that message to its destination while in Browser based pi sheet message is generating only after completing the full pi sheet but not immediatly after saving particular function.
can any body suggest me the option of immediatly creation of message and batch determination in browser based pi sheet.
thanks in advanceHi,
PI Catogory is as below.
INSTcat Description Type of process instruction
CONS_I Material consumption, all message char. 2
Characteristics are as per below described.
10 PPPI_DATA_REQUEST_TYPE REPEATED
20 PPPI_MESSAGE_CATEGORY PI_CONS
30 PPPI_PROCESS_ORDER
40 PPPI_OPERATION
50 PPPI_PHASE
60 PPPI_MATERIAL
61 PPPI_OUTPUT_CHARACTERISTIC PPPI_MATERIAL
70 PPPI_BATCH
80 PPPI_STORAGE_LOCATION
90 PPPI_FINAL_ISSUE
100 PPPI_RESERVATION_ITEM
110 PPPI_RESERVATION
200 PPPI_AUTOMATIC_VALUE PPPI_EVENT_DATE
210 PPPI_AUTOMATIC_VALUE PPPI_EVENT_TIME
300 PPPI_INPUT_REQUEST Material quantity consumed:
301 PPPI_REQUESTED_VALUE PPPI_MATERIAL_CONSUMED
302 PPPI_UNIT_OF_MEASURE
400 PPPI_MATERIAL_SHORT_TEXT
401 PPPI_OUTPUT_CHARACTERISTIC PPPI_MATERIAL_SHORT_TEXT
402 PPPI_OUTPUT_TEXT Planned Quantity:
403 PPPI_OUTPUT_CHARACTERISTIC PPPI_MATERIAL_QUANTITY
404 PPPI_MATERIAL_QUANTITY
405 PPPI_INPUT_REQUEST Material Issue
406 PPPI_VARIABLE Y
407 PPPI_REQUESTED_VALUE ZPPPI_MATERAIL_ISSUE
408 PPPI_COMMAND CLOSE TABLE ROW
409 PPPI_ACTION EXECUTE
410 PPPI_FORMULA Y=1
For process message PI_cons refer below details.
PPPI_BATCH Batch
PPPI_EVENT_DATE Date of Event
PPPI_EVENT_TIME Date/Time of Event
PPPI_FINAL_ISSUE Indicator: Final Issue
PPPI_MATERIAL Material Number
PPPI_MATERIAL_CONSUMED Quantity of Material Consumed
PPPI_OPERATION Operation Number
PPPI_PHASE Phase Number
PPPI_PROCESS_ORDER Process Order
PPPI_RESERVATION Reservation
PPPI_RESERVATION_ITEM Reservation Item Number
PPPI_SPECIAL_STOCK Special Stock Indicator
PPPI_STOCK_TYPE Stock Type
PPPI_STORAGE_LOCATION Storage Location
PPPI_UNIT_OF_MEASURE Unit of Measure
PPPI_VENDOR Vendor
ZPPPI_MATERAIL_ISSUE MATERIAL ISSUE
Any other detiails required then tell me. -
ABAP or Browser Based PI Sheet.
Hi Experts,
Kindly give me some knowledge,how to create a ABAP or Browser based PI Sheet related to ABAP point of View.
Thanks & Regards,
Prashant Sharma.Dear Viswanathan Srinivasan,
Thanks for reply,but i need to know how to make our own layout(PPPI_layout) either in ABAP or Browser based PI Sheet.
Thanks & Regards,
Prashant Sharma. -
Unplanned By-product reporting on Browser based PI sheet
Hello All,
I would like to report by-product on PI sheet. Only problem is I'm not maintaining the by-product on BOM and hence there will be no reservation. So when I do a GI using PI_CONS the system will do a 261 and not 531. There is no place to specify the -ve sign. Any thoughts on this issue are appreciated. ThanksHello,
Define the By-Products with negative quantity.
When the process order is created, the system assumes the Goods movment with 531.
So when the PI_CONS is created for this Material against the corresponding reservation , it will execute 531 movement.
View the below thread for Goods Receipt for By-Products:
http://help.sap.com/saphelp_45b/helpdata/en/89/a43573461e11d182b50000e829fbfe/content.htm
There is a SDN thread which similar issue you can view the same:
http://forums.sdn.sap.com/thread.jspa?threadID=1416788
Hope the information is useful
Regards -
PI sheet Converted from Browser into abap based PI sheet
Hi,
i want my PI sheet to convert it from browser based PI sheet into abap based pi sheet.could any suggest how to convert browser based pi into abap based pi .
thanks
VikranthDid not got the answer, clossing the threat.
-
Tables for brwoser based PI sheet
Hi,
Could you please let me know the tables for browser based PI sheets?Hi,
My requirement is to have the data from external systems populated in SAP tables and same is populated in PI sheet also.
How can we do this?
Thats the reason I was asking for the SAP tables where PI sheet data is stored.
Regards
Maybe you are looking for
-
Do you have some tips on deadlock avoidence for TDS?
Hi All, I developed a small BBS(multi-threaded web app) using BDB as backend database, providing view/post/update messages which will accordingly invoke operations on databases like forum.db/thread.db/post.db in one thread, however, I find a tip as f
-
Auto-covert to 128aac works with shuffle - does it work with Nano also?
hi! I own a shuffle alu, now I am thinking to buy a Nano. The problem is, that the apple care hotline could not answer the simple question: Is the auto-covert to 128 AAC format aviable also when a Nano or a big iPod is connected to the mac? thank you
-
Cross tab Header display..problem!
I have cross tab report in that we wanted to give user drag and drop option,but when the user drags and drops a new object the name of that object will not come automatically. i have tried in other ways to get that but unable to.Could somebody sygges
-
Configuration of type4 drivers - NoClassDefFounException
I having problems configuiring mySQL type4 driver com.caucho.jdbc.mysql.Driver ... NoClassDefFoundException is being thrown.. java.lang.NoClassDefFoundError: com/caucho/vfs/LogStream at com.caucho.jdbc.mysql.Driver.<clinit>(Driver.java) extracted the
-
What do I do if an iPod shuts down after going into sleep mode
My friends iPod keeps shutting down after it goes into sleep mode. I just fixed it up (restored it, had to dry it out after it fell into water) and now it does that. Everything else works fine but if I put it in sleep mode or put it into sleep mode i