PI sheet Converted from Browser into abap based PI sheet

Hi,
i want my PI sheet to convert it from browser based PI sheet into abap based pi sheet.could any suggest how to convert browser based pi into abap based pi .
thanks
Vikranth

Did not got the answer, clossing the threat.

Similar Messages

Convert XML file into ABAP Query

Hi All,
Can we capture a XML file generated from a Non-SAP system in SAP system and convert into ABAP Query to retreive Data from DB and post it back as a XML query to the same Non-SAP system using a Middleware. Can this process be done in cache memory level itself instead of saving in DB.
If it is possible pls do tell the procedure and steps to be followed.
Suggestion and Help will be much Appreciated
Thanks & Regds.
Ramesh

Hi check these blogs....
<a href="/people/r.eijpe/blog/2005/11/21/xml-dom-processing-in-abap-part-ii--convert-an-xml-file-into-an-abap-table-using-sap-dom-approach:///people/r.eijpe/blog/2005/11/21/xml-dom-processing-in-abap-part-ii--convert-an-xml-file-into-an-abap-table-using-sap-dom-approach
<a href="/people/tobias.trapp/blog/2005/12/08/xml-processing-in-abap--part-6:///people/tobias.trapp/blog/2005/12/08/xml-processing-in-abap--part-6

Can't drag image from browser into Artwork panel

Hey all,
This is on Snow Leopard, using the latest iTunes and Firefox versions.
When a file (or group of files) lacks artwork, I often use Google Images, find the appropriate image, drag the image to the desktop, then drag the image from the desktop into the mp3 file's "Artwork" panel when you have "Get Info" opened--and then delete the file on the desktop. There's too many steps.
Is there however some way to directly drag the image from Firefox directly into iTunes? And if not, is there some other easier way to add artwork?
Thank you for any tips.

Jolly Giant wrote:
you can add artwork by going these routes:
select them all in iTunes, +get info+, copy the image out of e.g. Safari or Preview, click once into the artwork box and paste the image into it.
Oh! I like this method. Saves the step of having to place it somewhere on the hard drive and deleting it after. Thank you, Jolly Giant.

Can no longer copy and paste from browser into illustrator - get placeholder that says "QuickTime and a decompressor are needed to see this picture"

We upgraded our iMacs to Yosemite and lost functionality on Illustrator CS4. We can save a picture to the desktop and then drag or 'place' the image to the Illustrator document, but if we drag directly from the browser or cut/copy/paste, we get a placeholder stating 'QuickTime and a decompressor are needed to see this picture'. .png, .psd, and .tiff files give a missing plugin error.

Illustrator CS4 and Yosemite aren't fully compatible. Some folks might have succeeded in getting it to run, but most have not.

Applescript to convert from AW6 spreadsheets to Excel

I have an iMac (iMac12,2) running OS 10.9.1 with applications of Pages’09 (4.3), Pages (5.0.1), Numbers’09 (2.3) and Numbers (3.0.1) available.
One of my laptops is a MBA (MacBookAir1,1) that I have kept at 10.6.8 with applications Appleworks (6.2.2) and Appleworks (6.6.9) available.
Recently, I converted many CWWP documents from AW6 into Pages. This was done on the iMac with an Applescript that copied a file (AnyDocumentCWWP) to the desktop as a file named AWV6, opened AWV6 with Pages’09, saved the result as AWV6.Pages, applied the creation date and modify dates of the original to AWV6.Pages, moved the new AWV6.Pages to the original directory and moved the original file to the trash, renamed AWV6.Pages to the original filename (excluding extension). The Pages version of the original document does not preserve the formatting of the CWWP, but the content was now discoverable with Spotlight. Since I was primarily concerned with the content, I would consider the conversion effort successful enough.
I performed the same sort of process on the iMac with CWSS documents converting from AW6 into Numbers. Here the results were less successful. I discovered that many of the converted spreadsheets had cells where the cell contained the last calculated value in substitute for the formula originally present -or- Numbers was unable to open the CWSS spreadsheet due to size limitations. Neither problem occurs when the file is converted on the MBA by Appleworks into an Excel format. For those CWSS files that did not properly convert to Numbers, I would like to perform a conversion to Excel.
When a given spreadsheet is manually opened on the MBA with either version of Appleworks, one can “Save as” using several formats of Excel. That operation will preserve the formula which cannot be recognized in Numbers’09. An example of this issue is when a spreadsheet has a cell that contains a formula with the function “ISNUMBER”. When I manually open a CWSS in Appleworks (either 6.2 version), I can Save As Excel Win 97 … or Excel Mac 98 … creating an XLS file that preserves the formula.
I have attempted two techniques with Applescript to be able to convert my CWSS documents into XLS format. Neither seem to work.
The first technique is very similar to a few lines extracted from a canned script found on http://macscripter.net/viewtopic.php?id=8296 the relevant code is:
set theSprTranslator to "Excel Win 97, 2000, XP 2002 spr"
tell application "System Events" to set mfpath to get path of disk item ("~/desktop/" as string)
set newfile to (mfpath & "AWV6" as string)
set NewFilename to AWV6XLS
tell application "AppleWorks 6"
    activate
    open newFile -- alias reference is ok
    save using translator theSprTranslator with NewFilename and replace
    close front document without saving
end tell
When this did not work, I attempted a scripted GUI solution as a second option. The GUI code I had found at http://stackoverflow.com/questions/17348326/applescript-to-save-an-appleworks-do cument-wont-compile-end-tell-vs-end-easy is:
tell application "System Events"
         tell process "AppleWorks"
                 click menu item "Save As…" of menu "File" of menu bar 1
                 click menu button "File Format" of window "Save : AppleWorks 6"
                 click menu item "Excel Mac 5 spreadsheet" of menu 1 of menu button "File Format" of window "Save : AppleWorks 6"
                 keystroke return
         end tell
end tell
Unfortunately there is no “File Format” menu button, after a bit of further research, I discovered UI Browser and wrote my own Applescript equivalent:
set mytempwork1 to AWV6
set theSprTranslator to “Excel Win 97, 2000, XP 2002 spr”
tell application "Finder" to open file (mytempwork1 as string) of the desktop
tell application "System Events"
    tell process "AppleWorks"
        click menu item "Save As…" of menu "File" of menu bar 1
        tell text field 1 of window "Save : AppleWorks 6"
            set value to "XX" & mytempwork1
        end tell
        click pop up button 1 of group 1 of window "Save : AppleWorks 6"
        click menu item theSprTranslator
        —click radio button 2 of group 1 of window "Save : AppleWorks 6"
        —delay 3
        —click radio button 1 of group 1 of window "Save : AppleWorks 6"
    end tell
end tell
tell application "System Events"
    tell process "AppleWorks"
        delay 10 — <<<<<IF YOU CLICK ON THE BUTTON WHILE IN THIS DELAY, THE SCRIPT WILL BEHAVE PROPERLY
        click button "Save" of window "Save : AppleWorks 6"
        delay 1
    end tell
end tell
This GUI script behaves almost as I would like. It seems to ignore the setting of the “pop up button 1” unless I actually intervene while the script is running and I click on the button. When I do so, the script runs as intended.
Is there a way to force Appleworks to recognize the Applescripted value of the “clicked” menu item?

Hello
As far as I know, there's no need to resort to GUI scripting. The problem in exporting in AppleScript is that AppleWorks 6 only accepts typeChar (TEXT) data as translator name while AppleScript string has become always being represented as typeUnicodeText (utxt) since OS X 10.5. This makes passing translator name to save command difficult but there's a workaround method as shown in the sample code below. The |TEXT|() handler does the job. Tested with AppleWorks 6.2.4 under 10.6.8.
main()
on main()
    set export_translator to "Excel Mac 98, 2001 spreadsheet"
        "Excel Mac 5 spreadsheet"
        "Excel Mac 98, 2001 spreadsheet"
        "Excel Win 5 spreadsheet"
        "Excel Win 97, 2000, XP 2002 spr"
    set export_translator_TEXT to my |TEXT|(export_translator)
    set src to (path to desktop)'s POSIX path & "in.cwk"
    set dst to (path to desktop)'s POSIX path & "out.xls"
    set srca to src as POSIX file as alias
    set dsta to touch(dst) as POSIX file as alias
    tell application "AppleWorks 6"
        --return export translators
        open srca
        tell document 1
            if document kind = spreadsheet document then
                save in dsta using translator export_translator_TEXT
            end if
            close saving no
        end tell
    end tell
end main
on touch(f)
    do shell script "touch " & f's quoted form
    return f
end touch
on |TEXT|(u)
        string u : source text
        return data : «data TEXT...» representing u converted to MACROMAN encoding
    do shell script "u=" & u's quoted form & "; printf '%s' \"$u\" | iconv -f UTF-8 -t MACROMAN | xxd -p"
    run (run script "
script
    «data TEXT" & result & "»
end script")
end |TEXT|
Hope this helps,
H

How to implement the DLL for the I2C USB Converter from Coptonix

I need to implement the DLL for the I2CUSB Converter from Coptonix into a LV-Program.
I'm not sure how to use the BroadcastSystemMessage (part of user32.dll).
Attached you will find the manual of the converter.
And you'll see the VI that I have created.
Many thanks in advance!
Silvio
Attachments:
Fenster_I2CUSB_GetDeviceInfo_LV2010.JPG ‏94 KB
IICUSB32DLL.pdf ‏58 KB

Hello smercurio_fc
Thank you very much for your posting. I'm able now to deal with the BroadcastSystemMessage... One problem still occures: I can start the VI once and it returns 9 messages (for every event that the DLL sees), but if I start the VI again
it adds 6 additional messages. I tried to flush the MessageQueue but that didn't help? What can I do?
Attachments:
COD01.0420-PP_Test17_I2C_Version_03.vi ‏43 KB
COD01.0420-PP_IIC_Teilbereich_01.JPG ‏201 KB
COD01.0420-PP_IIC_Teilbereich_02.JPG ‏206 KB

How to convert from value to word ?

Hi all,
I intend to convert from value into words such as 234.50 will be two hundred and thirty four and cents fifty. How should I code or any function will able to produce this ?
Please advise.
Rgds
Lim

Lim
The SP format modifier spells out part of a date - so does YEAR:
SQL> select to_char(sysdate,'YEAR') from dual
2 /
TO_CHAR(SYSDATE,'YEAR')
TWO THOUSAND EIGHT
SQL> To spell out a money amount, you have to take a decimal number and break it into dollars and cents (both integers):
SQL> r
1 declare
2    amount number(10,2) := 12345.67;
3    dollars integer;
4    cents integer;
5 begin
6    dollars := floor(amount);
7    cents := (amount - dollars) * 100;
8    dbms_output.put_line(to_char(to_date(dollars,'J'), 'JSP') || ' dollars a
nd ' ||
9        to_char(to_date(cents,'J'),'JSP') || ' cents');
10* end;
TWELVE THOUSAND THREE HUNDRED FORTY-FIVE dollars and SIXTY-SEVEN cents
PL/SQL procedure successfully completed.
SQL>Note that the spelling out is rather american (in UK we wouldn't add the hyphen and we would say twelve thousand three hundred AND forty five).
Using JSP means we are spelling out a Julian date (ie a number of days, which is allowed to get pretty large. But watch out - there is a limit (somwhere between 1 and 10 million) - ie the number of days between minimum date (4172 BC) and max date (around 31/12/9999).
HTH
Regards Nigel

ABAP code needed to convert from 0calmonth2 & 0calyear to 0calmonth

Hi SAP GURUS,
Can anybody give me the ABAP code to convert from 0calmonth2 and 0calyear to 0calmonth.and please suggest me whether i have to write start routine or end routine in transformations.
Thanks ALL.

hi,
in the transformation map 0calmonth2 and 0calyear to the 0calmonth field, and from drop down choose routine.
there will be an area where it will be mentioned write your piece of code below this line.
paste the below code:
Concatenate source_fields-0calmonth2 source_fields-0calyear into result.
also delete the line result = .
save the routine and execute the package.
regards,
Arvind.

Download File from DMS into WD ABAP gives junk data

Hi Experts ,
I want to achieve following functionality in WD ABAP.
User should be able to upload and download any file ( in any fromat ) , to / form document management server.
Since user can upload / download any file so I am using a file download UI , which would open any file in a new window.
I have searched about this in SDN ([ link |https://wiki.sdn.sap.com/wiki/display/Snippets/WDA%20Retrieve%20Data%20from%20DMS%20server]) and I have created a FM which gives me Xstring corresponding to the file in the DMS system.
then I pass this Xstring data to my context 'DATACONTENT' which is bound to file download UI (data property). But When I execute this application I am getting junk data in the new window. Please correct me where I am making a mistake.
following is the code in FM which in turn passes v_xstring ( of type xstring ) to WD ABAP . Then I bind this value to context
'DATACONTENT'.
wd_context->set_attribute( name = 'DATACONTENT' value = V_XSTRING ).
FUNCTION ZTESTING_EP.
""Local Interface:
*" IMPORTING
*"     VALUE(DOCUMENTTYPE) LIKE BAPI_DOC_AUX-DOCTYPE DEFAULT 'IVF'
*"     VALUE(DOCUMENTNUMBER) LIKE BAPI_DOC_AUX-DOCNUMBER DEFAULT 1
*"     VALUE(DOCUMENTPART) LIKE BAPI_DOC_AUX-DOCPART DEFAULT 000
*"     VALUE(DOCUMENTVERSION) LIKE BAPI_DOC_AUX-DOCVERSION DEFAULT 00
*" EXPORTING
*"     VALUE(C) LIKE BAPIEMPLB-RETURN
*"     VALUE(V_XSTRING) TYPE XSTRING
*"     VALUE(RETURN) TYPE BAPIRET2
data: ls_docfiles type bapi_doc_files2,
       ls_dms type dms_doc_files,
       lt_docfiles type standard table of bapi_doc_files2.
select single * from dms_doc_files
   into ls_dms
   where "Retrieve file
MOVE '0000000000000000000000001' to DOCUMENTNUMBER .
MOVE '000' to DOCUMENTPART .
MOVE '00' to DOCUMENTVERSION .
if sy-subrc = 0.
    ls_docfiles-documenttype = DOCUMENTTYPE.
    ls_docfiles-documentnumber = DOCUMENTNUMBER .
    ls_docfiles-documentpart = DOCUMENTPART .
    ls_docfiles-documentversion = DOCUMENTVERSION.
endif.
call function 'BAPI_DOCUMENT_CHECKOUTVIEW2'
    exporting
      documenttype              = ls_docfiles-documenttype
      documentnumber            = ls_docfiles-documentnumber
      documentpart              = ls_docfiles-documentpart
      documentversion           = ls_docfiles-documentversion
      documentfile              = ls_docfiles
     getstructure              = '1'
     getcomponents             = 'X'
     getheader                 = 'X'
     pf_ftp_dest               = 'SAPFTPA'
     IMPORTING
     return                    = return
   tables
     documentfiles             = lt_docfiles.
MOVE return to return.
data: i_bin type standard table of sdokcntbin,
        i_info type standard table of scms_acinf,
        v_info type scms_acinf,
        v_id type sdok_phid,
        v_cat type sdok_stcat.
if sy-subrc = 0.
    loop at lt_docfiles into ls_docfiles.
      v_id = ls_docfiles-docfile.
      v_cat = ls_docfiles-storagecategory.
      call function 'SCMS_DOC_READ'
        exporting
          stor_cat                = v_cat
          doc_id                  = v_id
          phio_id                      = ls_docfiles-file_id
       tables
         access_info                 = i_info
         content_bin                 = i_bin
       exceptions
         bad_storage_type            = 1
         bad_request                 = 2
         unauthorized                = 3
         comp_not_found              = 4
         not_found                   = 5
         forbidden                   = 6
         conflict                    = 7
         internal_server_error       = 8
         error_http                  = 9
         error_signature             = 10
         error_config                = 11
         error_format                = 12
         error_parameter             = 13
         error                       = 14
         others                      = 15
    endloop.
    if sy-subrc <> 0.
    else.
     data: v_xstring type xstring.
      read table i_info into v_info index 1.
      call function 'SCMS_BINARY_TO_XSTRING'
        exporting
          input_length       = v_info-comp_size
       importing
         buffer             = v_xstring
        tables
          binary_tab         = i_bin
       exceptions
         failed             = 1
         others             = 2
      if sy-subrc <> 0.
      endif.
    endif.
endif.
ENDFUNCTION.
Thanks in advance
Abhay

Hi Abhay,
I have used the belwo method to achive the same:
1) Call funtion 'CVAPI_DOC_GETDETAIL' to get the document details.This function module returns PT_FILES tables parameter
2) Loop at PT_FILES and call the 'CV120_GET_MIME_TYPE' funtion by passing DAPPL of PT_FILES to get the mime type.
3)call function 'CVAPI_DOC_CHECKOUTVIEW' by passing PT_FILES values form above retrived to the function module in this step
4)Loop at the content and convert to XSTRING using SCMS_XSTRING_TO_BINARY
After getting the XSTRING,MIMETYPE use ATTACH_FILE_FOR_RESPONSE method of CL_WD_RUNTIME_SERVICES to download the file
Sample Code:
CALL FUNCTION 'CVAPI_DOC_GETDETAIL'
      EXPORTING
        pf_dokar     = ls_draw-dokar
        pf_doknr     = iv_documentnumber
        pf_dokvr     = ls_draw-dokvr
        pf_doktl     = ls_draw-doktl
        pf_read_drat = abap_true
      IMPORTING
        psx_draw     = ls_draw
      TABLES
        pt_drat      = et_drat
        pt_files     = et_files
      EXCEPTIONS
        not_found    = 1
        no_auth      = 2
        error        = 3
        OTHERS       = 4.
ENDIF.
IF et_files IS NOT INITIAL.
    LOOP AT et_files INTO ls_files.
      CALL FUNCTION 'CV120_GET_MIME_TYPE'
       EXPORTING
         pf_dappl           = ls_files-dappl
*       PF_FILE            =
       IMPORTING
         pfx_mimetype       = lv_mimetype.
      CLEAR lt_files_checkout.
      CLEAR lt_content.
      ls_files_checkout-description = ls_files-description.
      ls_files_checkout-lo_objid = ls_files-lo_objid.
      ls_files_checkout-ph_objid = ls_files-ph_objid.
      APPEND ls_files_checkout TO lt_files_checkout.
      CALL FUNCTION 'CVAPI_DOC_CHECKOUTVIEW'
        EXPORTING
          pf_dokar                 = ls_draw-dokar
          pf_doknr                 = iv_documentnumber
          pf_dokvr                 = ls_draw-dokvr
          pf_doktl                 = ls_draw-doktl
         pf_content_provide       = gc_content_provide
*         PS_API_CONTROL           =
*         PF_STD_URL               = 'X'
       IMPORTING
         psx_message              = ls_message
         psx_draw                 = ls_draw
       TABLES
         pt_files                 = lt_files_checkout
*         PTX_COMPONENTS           =
         ptx_content              = lt_content.
      IF ls_message CA gc_error_a.
        ev_fail = abap_true.
      ELSE.
        CLEAR lt_xdata.
        CLEAR ls_bindata.
*Data into String
        LOOP AT lt_content INTO ls_content.
          lv_size = ls_content-orln.
          ls_xdata-line = ls_content-orblk.
          APPEND ls_xdata TO lt_xdata.
        ENDLOOP.
* -- Convert XData to Xstring
        CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
          EXPORTING
            input_length = lv_size
          IMPORTING
            buffer       = ls_bindata
          TABLES
            binary_tab   = lt_xdata
          EXCEPTIONS
            failed       = 1
            OTHERS       = 2.
        IF sy-subrc NE 0.
          ev_fail = abap_true.
        ELSE.
          ls_file_list-filename = ls_files-description.
          ls_file_list-mimetype = lv_mimetype.
          ls_file_list-content = ls_bindata.
          ls_file_list-application_id = ls_files-lo_objid.
          ls_file_list-file_id = ls_files-ph_objid.
          APPEND ls_file_list TO et_file_list.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
Regards,
Madhu

Limitations of trial version 13? I cannot load pictures into the photomerge panorama window either from' browse' or 'add open files'.

On Adobe's web site it states the trial version has all functionality. FAQ, common questions & answers | Adobe Photoshop Elements 13 "These trial versions are fully functional, so every feature and aspect of the product is available for you to test-drive. Product trials can easily be converted for unrestricted use without the necessity to reinstall the software in most cases."
However, I cannot load pictures into the photomerge panorama window either from' browse' or 'add open files'. When I select either way nothing happens.This happens if I enter panorama from photo editor and/or organizer.
Can anybody enlighten me about this?
Thanks,
Barry

It seems your Samba is denying access to these files & dirs. My best guess would be that either the Samba user is not allowed to write (and read) those (in which case you'd have to modify the permissions accordingly) or Samba sets, when the share is mounted, the permissions such that your user is not allowed to read and write (you may in this case try to just set permissions for you to allow you what you want to do; or use "create mask" or "directory mask" or "writable" in your samba config. ).
Also, what do the logs say about this? According to your samba conf they are in /var/log/samba/%m.log where %m is the hostname or IP.

How to convert from image based pdf to text based pdf

I have Adobe 9 Pro. How to convert from image based pdf to text based pdf? For example, if someone emails a scanned pdf to me, how do I convert that document into a text based pdf?

To perform OCR, open the document and select: Document > OCR Text Recognition > Recognize Text Using OCR
More information on the various options is in the Acrobat help doc.

Receive message after importing serveral songs from CD into iTunes (latest ver 11.1.5.5)... "Error occurred while converting the file 'songname'. The required folder cannot be found." CD/DVD ROM is no longer recognized until restart.

Consistently receive the following message after importing serveral songs from CD into iTunes (latest ver 11.1.5.5)...
"Error occurred while converting the file 'songname'. The required folder cannot be found."
CD/DVD ROM is no longer recognized until computer is restarted.

I have the same problem. I recently moved my music from a Vista PC to a new Laptop with an external CD drive. It will copy one song from the CD and it will show in the Music file and then I get the message ' Error importing a CD - Folder not found'. I must unplug the CD drive and plug it back in. I have seen no fix for this problem.

Why can't I drag and drop images from the browser into other programs?

Ever since I upgraded to Firefox 4 (even after I upgraded again to Firefox 5) I have been unable to drag images from the browser into other programs, including MS Paint and IcoFx. I receive an error message stating that the file (the address given lists it as being located in the temporary files folder) cannot be found.
Prior to this I had always been able to conveniently drag and drop images for easy editing without having to save first and then open them. This feature is important to me, as I work with graphics very often, and is still available in Chrome and Internet Explorer. I love Firefox though, and hope that there is something I can do to fix the problem.

I had this problem on Windows 8.1.1 and iTunes 11.2.2.3
To resolve it from within Itunes I did : Edit, Preferences, Sharing.
I took the tick out of "Share my library on my local network"
Click OK.
Closed iTunes/
Reopened iTunes and I can drag and drop.
I went back into Edit, Preferences, Sharing and put the tick back and clicked OK.
Works fine now.

I've got a virgin mobile chaser and I want to import bookmarks from the factory browser into Firefox. Can anyone help me with this?

need to import bookmarks from factory browser into Firefox on a virgin mobile chaser

* Open Firefox
* press the Android menu button or the 3 dot button in the upper right
* find Settings and tap it
* scroll to the bottom of the setting and select import from Android

Convert XML string into an abap format date and time

Hi,
Does anyone know of a method or a function module in ABAP which converts XML string into an abap format date and time.
Here is a part of the xml that I want to convert.
<ns2:EventDateTime>2009-07-02T10:13:45+10:00</ns2:EventDateTime>
<ns2:EventMessageTransmissionDateTime>2009-07-02T10:13:45.987+10:00</ns2:EventMessageTransmissionDateTime>
Currently EventDateTime and EventMessageTransmissionDateTime are type XSDDATETIME_Z and these are converted to proper dates and times. We will be changing these fields to a STRING instead of XSDDATETIME_Z. The reason for this is to make the field more versatile. The customer would be receiving dates with Zulu (2009-09-23T12:00:00Z), with offsets (2009-09-23T12:00:00+10:00/-10:00) and just local timestamp (2009-09-23T12:00:00). With this, we need to make the date fields as string
to be able to accept the various date formats (esp. the local timestamp).
I am looking for a standard function module or method that will convert the xml string to a proper date and time abap format.
Would appreciate anyone's help!
Thanks.
Edited by: eunice ocson on Jul 13, 2009 1:49 AM
Edited by: eunice ocson on Jul 13, 2009 1:50 AM
Edited by: eunice ocson on Jul 13, 2009 1:51 AM
Edited by: eunice ocson on Jul 13, 2009 1:51 AM

Hi Eunice
Use the FM 'SMUM_XML_PARSE'
for more info
[Convert XML string to ABAP|XML String to ABAP or GUI]
hope it helps you.
Thanks!!

PI sheet Converted from Browser into abap based PI sheet

Similar Messages

Maybe you are looking for