Browser crash whenever tried to run forms,

i have installed form 10g on my system (Vista)
when ever i tries to run a form ,my browser crashes (mozilla 3.5 and IE 8)
the OC4j console shows following message
09/10/08 15:37:43 FormsServlet init():
configFileName: J:\DevSuiteHome_1/forms/server/formsweb.cfg
testMode: false

Good afternoon,
First thing to check: Popup blocker. Turn it off. If you are using 3rd party toolbars, check their popup blockers also and turn those off. And, finally, if you are using 3rd party toolbars, try turning them off. I've found that Oracle Forms doesn't really like 3rd party toolbars very much.
Good Luck,
Don.
You can reward this reply by marking it as either Helpful or Correct :)

Similar Messages

Browser craches when trying to run Forms

Hi!
Got a problem here.
I have installed DEvSuite (DB already installed for a while).
I was trying to run forms builder. AT first I needed to install jinit-something which I did.
After that forms builder would open in the browser but would not connect (some TCP error).
Now browser started to crash. I click 'Run Form', brwoser opens and immediately crashes.
It's true for both IE and Mozilla.
I did re-install DevSuite and checkd whole system for viruses - nothing.
The problem remains. I run it on a single stand-alone PC with XP pro.
Any ideaswhat the problem is and how to fix it?
Thank you.

You could try using the java plugin (jpi = sun's java runtime) in stead of the jinitiator. It is in sometimes reported that a toolbar inside the internet explorer could crash the internet explorer.
If you try to run inside the internet explorer of firefox and the coffee cup(jinitiator) in the system tray still exists then check in the console if there exists some error like jar's which are missing.

FRM-92101 when trying to run forms from Forms Builder 10g

I have been struggling with this for a few days now and have tried multiple solutions around on these forums without any resolution yet!
Trying to run Forms Builder on a Windows XP machine with Oracle Development Suite 10.1.2.0.2 installed in its own ORACLE_HOME. The installation completes succesfully and I can start the OC4J instance.
1) When I open up Forms Builder and pull up the test.fmb form and try to run it, I get the following error:
FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details.
On clicking 'Details' the following errors are displayed:
Java Exception:
oracle.forms.netConnectionException: Forms session <1> aborted: unable to communicate with runtime process.
2) The ORACLE_HOME\j2ee\DevSuite\application-deployments\forms\application.log includes the following errors:
11/11/25 10:02:23 formsweb: RunformProcess.connect(): failed !
11/11/25 10:02:23 formsweb: Forms session <1> aborted: unable to communicate with runtime process.
11/11/25 10:02:23 formsweb: Forms session <1> exception stack trace:
java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
     at java.net.Socket.connect(Socket.java:452)
     at java.net.Socket.connect(Socket.java:402)
     at java.net.Socket.<init>(Socket.java:309)
     at java.net.Socket.<init>(Socket.java:153)
     at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
     at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
     at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
     at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
3) The Java console has the following error:
oracle.forms.net.ConnectionException: Forms session <1> aborted: unable to communicate with runtime process.
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.HTTPConnection.connect(Unknown Source)
     at oracle.forms.engine.FormsDispatcher.initConnection(Unknown Source)
     at oracle.forms.engine.FormsDispatcher.init(Unknown Source)
     at oracle.forms.engine.Runform.initConnection(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Opening http://127.0.0.1:8889/forms/java/oracle/forms/engine/RunformBundle_en_GB.class
Connecting http://127.0.0.1:8889/forms/java/oracle/forms/engine/RunformBundle_en_GB.class with no proxy
Opening http://127.0.0.1:8889/forms/java/oracle/forms/engine/RunformBundle_en_GB.properties
Connecting http://127.0.0.1:8889/forms/java/oracle/forms/engine/RunformBundle_en_GB.properties with no proxy
Opening http://127.0.0.1:8889/forms/java/oracle/ewt/alert/resource/AlertBundle_en_GB.class
Connecting http://127.0.0.1:8889/forms/java/oracle/ewt/alert/resource/AlertBundle_en_GB.class with no proxy
Opening http://127.0.0.1:8889/forms/java/oracle/ewt/alert/resource/AlertBundle_en_GB.properties
Connecting http://127.0.0.1:8889/forms/java/oracle/ewt/alert/resource/AlertBundle_en_GB.properties with no proxy
Any inputs will be greatly appreciated.

Same issue here... Been trying to get this working since a week now. I tried all the solutions like memory heap and all but no luck.
One thing that I would like to know is that, in some threads the resolution was to recompile the INS_FORMS.MK file under /forms/lib32 but with my installation I don't have that "lib32" folder under /forms/ and I can not even find that file anywhere in my entire installation.
I am using 12.1.1 on Windows Server 2008.
Any help or guidelines is greatly appreciated.
Santhosh.

Explorer has Hanging while Trying to Run Forms 10g

Hi,
While Trying to Run Forms 10g on Windows vista (o.s) "Explorer has Hanging " ...
Operating system : Windows vista
Forms - 10g
Plz Any one help...
Thanks....
Sa....

Is it the problem with Vista only or in other versions of windows tooo. If the same problem occours in other IE versions then check if you have installed jinitiator.Most probably it is in case the jinitiator not installed...

IMac crashes when trying to run Time Machine to 500 gig Time Capsule

After working fine for several months, every time my iMac tries to run Time Machine to my 500 gig Time Capsule the mac crashes. The grey veil cascades down the screen and I have to hold the power button down for a while to restart. Any suggestions.

same here. time capsule has worked for six months and overnight, in the middle of the night it shows the grey veil and prompts a restart.
this happens whenever i connect to time capsule.
at the moment i'm back to my trusty plug-it-in iomega which is blazingly fast.
any ideas on how to remedy this, i know ita kernel panic, but i dont know what the fix is?????

Firefox 5.0 consistently crashes when trying to run a java applet

Trying to run a program with JAVA webstart, Firefox crashes. Java version is correct (as verified by Java test).
repeatable every time.
Sometimes does not generate a crash report (50% of time).

Try logging in to a different user account on the same computer. Does Safari have the same problem?

Error trying to run Forms - ifcom60.dll

After installing Forms 6i, I get the following error when I attempt to run Forms Builder:
Error dialog titled "ifbld60.EXE - Ordinal Not Found" with the error message:
"The ordinal 427 could not be located in the dynamic link library ifcom60.dll"
Does anyone know what the solution to this problem is, please?
Thanks
Ken

From metalink.oracle.com
fact: Oracle Application Object Library 11.5
fact: MS Windows NT
symptom: Two node installation
symptom: REP-1415: 'af_srwinit1formula' (in request log)
symptom: ERR REP-1415: 'afterreport': Unknown user exit getting an error
(in request log)
symptom: Cannot run concurrent requests after apply the Dev6i patchset 1
symptom: "ordinal 427 cannot be located in ifcom60.dll" (Error on
concurrent server)
change: Applied Dev6i patchset1.
cause: Applied Dev6i patchset 1 on middle tier and only the report portion
of the patchset1 on back end.
fix:
Apply the full contents of Dev6i patchset 1 on all nodes.
Regards
Grant Ronald
Oracle Product management

Crystal Reports crashing when tries to run

My coworker is trying to run his crystal report
he said he's using version R2 and the top error message said something like
Crystal Reports stopped working.
also, the error details are below.
Does anyone have information about this error? thanks
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             crw32.exe
Application Version:                           11.5.3.417
Application Timestamp:                     43ff182c
Fault Module Name:                          StackHash_66ad
Fault Module Version:                        6.1.7600.16695
Fault Module Timestamp:                  4cc7ab44
Exception Code:                                  c0000374
Exception Offset:                                000c35e3
OS Version:                                          6.1.7600.2.0.0.256.48
Locale ID:                                             1033
Additional Information 1:                  66ad
Additional Information 2:                  66adba9bd6d4e10cade0d8da5b5391df
Additional Information 3:                  843f
Additional Information 4:                  843f1810419c6e096b8e8b5d0f133bde

Hello,
To get to SP 6 first you have to install SP 4 5 and 6 incrementals.
It is easier if you uninstall CR and then install the full build of SP4 and then apply SP5 and SP 6, 5 and 6 are incremental builds only.
https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
https://smpdl.sap-ag.de/~sapidp/012002523100013876392008E/crxir2win_sp5.exe
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
Run License Manager first to get the keycode if you don't have it on paper somewhere.
Thank you
Don

10.3 Apps crash whenever trying to use the clipboard

Hello all,
My girlfriend recently got a B+W G3 350. We spent some time with it and have 10.3.3 up and running quite nicely.
There is only one small problem: whenever you try and copy or paste text in any application (we've tried Safari, FireFox, TextEdit) the application crashes with an "Unexpectedly Quit" error.
The only exception to this is AppleWorks 6; the clipboard works without a hitch in that app.
After having lots of "Unexpectedly Quit" messages with my G4 MDD, I decided I would try memtest on the G3 and make sure there wasn't anything going on there (as had been the problem with my G4).
I ran it on all RAM, 5 passes. Passed.
Any help would be greatly appreciated. She can still work in AppleWorks for her schoolwork, so it's really more of a nuisance than anything, but I'd like to have it resolved. If possible, I'd like to not update it to 10.3.9, as I did have it running for a time on a similar machine and it was much slower than 10.3.3.
I have also Safe booted; same problem there. And I tried rm'ing /Library/Preferences/com.apple.finder.plist, to no avail.
Once again, thanks for any help.
Chris Graham
B+W G3 350 Mac OS X (10.4.9) 256MB RAM, 12GB HDD, Rage 128

You're Again Welcome Chris!
"...and the disks that came with the laptop."
AHA! That's one problem! You must use the Full Retail Version, of the Panther Install CDs.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
"...I did not install the SCSI card firmware update,..."
That's another problem. The Firmware Update must be installed.
You must start the computer from a Mac OS 8 or Mac OS 9 System Folder on the computer's hard disk, not from a CD, in order to install it.
And that creates yet another problem, as you do not have the original system discs.
Where did you acquire the Mac? Is there any way of contacting the previous owner to request them?
Panther, is no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
If you know what to look for, a Full Retail Version, of the Panther Install CDs, can be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, FastMac, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Panther is only on CDs, not DVDs.
Unless purchased from AppleRescue, the discs should look exactly like the images in the above links, and not say Upgrade on them.
Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
Panther System Requirements
Additional Panther System Requirements
Shop Carefully, Examine All Documentation, And Good Luck!
ali b

Acrobat 9 Pro Extended crashes when trying to distribute form

Hi.
I am experiencing an issue with Adobe Acrobat 9 Pro Extended on Windows XP Pro SP3 32-bit.
I have created a pdf file derived from an html and css file.
The pdf file comes out perfectly with form fields automatically detected, etc.
However, when I try to distribute the form, by clicking on
1. Forms > Distribute Form...
2. Manually collect responses in my email inbox..
3. Save a local copy and manually send it later.
Acrobat.exe crashes with faulting module acroform.api. when trying to create the response file.
Faulting application acrobat.exe, version 9.0.0.332, faulting module acroform.api, version 9.0.0.332, fault address 0x00025878.
Any ideas?
I can successfully distribute a different form created from InDesign.
Thank you.

Any ideas? there was an update on adobe dated 2/25/13. Perhaps if I uninstall it? I need advice on how to uninstall. When I view updates and click on it, and then click uninstall, it goes back to the Program Screen, in Control, for all programs. Then do I click on Acrobat and Uninstall? I am nervous about doing this. Thanks

Quiktime Pro crashing when trying to run updates - windows XP PRO

I have previously purchased QuickTime PRO & MPEG2 and now every time the QUICKTIME update wants to run . . . it crashes the update, causing QuickTime to crash.
And if it is done through the webbrowser it will also crash FireFox & IExplorer 7.
It happens every time I visit a web page and requires the new update to take effect and since quicktime update runs in auto it causes the crashing of any browser.
The "culprit" error has to do with QuickTime.cpl (Shell32.dll and Control_Run.DLL)
Does anyone run into this problem and if so, have you found a solution?
The update is from QT 7.4 to 7.4.1 (the latest one).
Thanks all
Z

Same here...AND....when I try to change video settings when EXPORTING to .AVI as an example...just closes the program. Annoying! ANY HELP?!?!

Repeated crashes when trying to add form

Hello,
I am using DW CS3 with DDT and whenever I try to add a Nextensio form to a page, DW will crash after I finish the wizard.
I am using Windows XP pro SP2 and I have 2GB RAM.
This is a new site ( I have to remake site as I had used ADODB in original)
Any thoughts?
Thanks.
Chris

Thanks Richard,
That did the trick.
Cheers.
Chris
[email protected] wrote:
> I was having the same problem. This was a huge pain but check out this thread. It did work
>
>
http://www.adobeforums.com/cgi-bin/webx/.3bc412a6/3

Nokia 6120c WEB Browser crashing when trying to di...

I tryed to acces the following site: www.erepublik.com which has flash content. The browser loads a part of the site and then exits ( crashes ) without warning. I tryed to install another browser from http://www.skyfire.com/ but this one crashes without loading any site: it asks me which connection to use and then it displays a "connecting..." message after which it crashes ( after about 30 sec ). I have updated my firmware to the latest version ( 6.01 ) and reseted to factory settings but no luck. I continue to have the same problem. Any solution ? It's very annoying.
Thank you !

It works on my firefox and XP. Maybe the site is trying to download something, or one of your software extensions is interfering.
# try clearing your browser cache and the website cookies
# if problems continue try in Firefox's [[safe mode]]
#* do not make changes in the first window, just click on continue
#* use only the default theme
# still having problems, then in safe mode also disable plugins
* see also
** [[troubleshooting extensions and themes]]
** [[Error loading web sites]]

Html error when trying to run form on 10.1.4 installation

Hi
I have installed portal 10.1.4 on a new server and imported a locally built provider from another machine which is idential to the new one. Whenever I run the forms which were created I get the following error 'Line 28 Char 34 Unterminated string constant code 0' this happens whatever form I try to run and also on the example forms supplied with portal. I have viewed the source on these pages to see if there is anything obvious but there is'nt.
Any Ideas greatly appreciated.
Jayne

Try taking a look at the OC4J_Portal logs at the time of the error, you could also try setting up the portal repository log to trace the error.

Browser crashes when trying to open 2 applets in 2 browser windows-

i am having this weird problem, on windows XP, if i open a applet in IE or firefox browser and then open a new browser window and try to open another applet in that windows, the browser simply crashes with no error message or anything,
For example
if i click on link below and then when this applet is loaded i open a new browser window and try to open other applet from the link the new opened window closes.
can some one try this on there PC and let me know if it happens there, and what might be the issue?
[http://www.realapplets.com/applets/quizmaster/]
[http://www.realapplets.com/applets/secretpass/]

Open the Console app in Applications>Utilities and look for log entries at the time of the problem and post them here

Browser crash whenever tried to run forms,

Similar Messages

Maybe you are looking for