Browser specific Issue with af:fileDownloadActionListener/ component.

Hi all,
We are facing an issue with <af:fileDownloadActionListener/> component.
The issue is that when we download a particular file to the local system/machine, after downloading the file using <af:fileDownloadActionListener/>, none of the actions/links/button work on the page thereafter. We have to do a browser refresh or switch the URL.
After doing some investigation, it is looking like a browser specific issue, as this is reproducible only on chrome but not on firefox or IE.
The UI component used is <af:fileDownloadActionListener/> component. Below is the snippet of the code. Is there anything to be specified for af:fileDownloadActionListener?
<f:facet name="buttonBar">
<af:panelGroupLayout partialTriggers="expPoll expProgess" id="gsexppgl11">
<af:commandButton text="#{uib_o_w_w_r_WebCenter.LABEL_DOWNLOAD}"
shortDesc="#{uib_o_w_w_r_WebCenter.LABEL_DOWNLOAD}"
id="expClientp"
disabled="#{!pageFlowScope.o_w_w_i_v_b_l_WebCenterExportBean.showExportButtons}">
<af:fileDownloadActionListener filename="#{pageFlowScope.o_w_w_i_v_b_l_WebCenterExportBean.fileName}"
contentType="application/force-download; charset=utf-8"
method="#{pageFlowScope.o_w_w_i_v_b_l_WebCenterExportBean.dumpOAROnClient}"/>
</af:commandButton>
</af:panelGroupLayout>
</f:facet>
Anyone has faced this issue before? Is this a known issue?
Thanks,
Ankush

Jdveloper version is 11g. But we saw this issue with 12c as well.
I have reproduced this in a standalone application as well. I had a page on which I just had a button attached to the file download component. And I faced the similar situation - works fine on IE/FF but causing issues on chrome/safari.

Similar Messages

  • 3 Specific Issues With 10.7 Lion (Safari, iCal, Mail)

    I have 3 specific issues with Lion that I seem unable to fix. Note that these issues did not exist before my upgrade to Lion.
    1. Safari 5.1.5 & "White Screen":
    If I open more than 3 or 4 Safari windows at a time, suddenly the winsows switch to "white screen", and try and reload (even windows that are sitting on the dock). About 50% of the time, they don't reload and I am stuck with white screens. So I have to quit Safari and then re-open.
    Safari then tries to reload the pages all at once (which slows down my MacBook). I have de-slected "Restore Windows" in System Prefs/General, but Safari tries to do so anyway.
    2. Mail 5.2 & having to delete e-mails twice:
    When I delete an e-mail sent to my .Me address, it deletes and then comes back again (when I switch to a different mail box). Then I have to delete it a second time. This onl;y happens with the .Me e-mails. I have tried deleteing that account and then setting it up again, but the same thing happends evey time.
    3. iCal 5.0.2:
    When I launch iCal either manually or automatically (on start-up), it takes a good 60 seconds to actually open (lots of bouncing around on the dock & that's about it), even though I have "Restore Windows" de-selected in System Prefs/General.
    Any help in solving these issues would be greatly appreciated, especially as they effecty the 3 applications I use the most and therefore effect my MacBook's performance greatly.

    Solved!
    A Workaround:
    Get the Webkit Nightly Build , download and add to your App Folder, make it the Default browser, follow the instructions to show your homepage, after this you almost done, than download
    RCDefaultApp, open System Preferences launch RCDefaultApp, go under Apps, search for Webkit and mark all all associations, Safari is no more dfeault for something, after this, go to Extensions Pane and search for the safariextz Extension, now set it to Webkit as well, now you are most up to date and Webkit updates more often than Safari ever did ^^
    Enjoy

  • Issue with "firstRecord" Business Component method of JAVA Data bean API.

    Hi,
    Following is my use-case scenario:
    I have to add or associate child MVG business component (CUT_Address)
    with the parent business component (Account) using JAVA Data bean API.
    My requirement is: first to check whether child business component(i.e. CUT_address) exists. If it exists then associate it with parent business component (Account)
    otherwise create new CUT_address and associate it with account.
    Code (using JAVA Data bean APIs) Goes as follows:
    SiebelBusObject sBusObj = connBean.getBusObject("Account");
    parentBusComp = sBusObj.getBusComp("Account");
    SiebelBusComp parentBusComp;
    SiebelBusComp childBusComp;
    // retrieve required account.. Please assume Account1 exists
    parentBusComp.activateField("Name");
    parentBusComp.clearToQuery();
    parentBusComp.setSearchSpec("Name", "Account1");
    sBusComp.executeQuery2(true, true);
    sBusComp.firstRecord();
    Counter = 0;
    while (counter < Number_Of_Child_Records_To_Insert)
    childBusComp = parentBusComp.getMVGBusComp("City");
    associatedChildBusComp = childBusComp.getAssocBusComp();
    childBusComp.activateField("City");
    childBusComp.clearToQuery();
    childBusComp.setSearchSpec("City", Vector_of_city[counter]);
    sBusComp.executeQuery2(true, true);
    if( sBusComp.firstRecord() )
    // Child already exist and do processing accordingly
    else
    // Child does not exist and do processing accordingly
    childBusComp.release();
    childBusComp = null;
    associatedChildBusComp.release();
    associatedChildBusComp=null;
    Now the issue with this code is: For the first iteration, SbusComp.firstRecord returns 0 if records does not exist. However from the second iteration, SbusComp.firstRecord returns 1 even if there is no record matching the search specification.
    Any input towards the issue is highly appreciable.
    Thanks,
    Rohit.

    Setting the view mode to "AllView" helped.
    Thanks for the lead!
    In the end, I also had to invoke the business component method SetAdminMode with "true" as the argument so that I could also modify the records from my script.

  • Issue with af:selectOneChoice component

    Hi All,
    I am facing issue when using the selectOneChoice components in the below scenario
    I have a page fragments, lets say it as MainPage.jsff, where records are shown in table. On selecting a record and pressing the update button the user moves to EditPage.jsff where the record is shown in editable mode. The MainPage.jsff and EditPage.jsff are based on the same View Object Instance. The EditPage.jsff contains 4 fields,
    field1 - Non Editable
    field2 - Non Editable
    field3 - Editable - selectOneChoice - dependent on field1 and field2. Achieved by setting the bind values in the View Accessors.
    field4 - Editable - selectOneChoice -dependent on field1, field2, field3. Achieved by setting the bind values in the View Accessors.
    Test Case: -
    User selects a record and clicks the edit button, all the fields - fields1, field2, field3, field4, fetch the correct values for the record. So far so good.
    Now, the user navigates back to MainPage.jsff and selects another record and clicks on the update button. This time the values of the field1 and field2 are proper but the values of field3 and field4 which are editable and displayed in selectOneChoice component display some other value with select item of the list containing only one item. Is there some caching issue with the selectOneChoice components which is creating the issue?
    When i do a browser refresh at this stage, the values in the fields - field3 and field4 are automatically set to correct value.
    Also, when i drop field3 and field4 from the view object as simple <af:outputText> the values are shown with correct values.
    Is there anything which i am missing?
    Thanks,
    Tarun
    P.S Though the page contain other components i have narrowed down the test case and considered only the components with the issue.

    Hi Tarun.
    I think selectOneChoices are not refresh try in your EditPage.jsff button ActionListner with fillowing way with partial trigger
    Craete binding attribute for two selectOneChoice and then
    YourBindUIComponent.resetValue();
    AdfFacesContext adfFacesCtx = AdfFacesContext.getCurrentInstance();
    adfFacesCtx.addPartialTarget(YourBindUIComponent);

  • Layout issue with af:tree component

    I am using af:tree component but I am finding layout issue with it. I have a requirement where in I need the tree to stretch to the available space but a horizontal and a vertical scrollbar comes up automatically. Is there a way to handle this issue?

    User, without your jdev version it's hard to help.
    Have you embedded the tree component in a stretch layout?
    Timo

  • Do we have a list of known browser specific issues of SP 2013

    http://office.microsoft.com/en-us/help/sharepoint-server-2013-known-issues-HA102919021.aspx
    http://office.microsoft.com/en-us/help/sharepoint-foundation-2013-known-issues-HA102919008.aspx
    has the list of known issues but not browser specific. Do we have any such categorization?
    Thanks, Karthik

    You could also turn this around and read the Browser Planning for SharePoint 2013 articles.  Might be some useful information in there.
    http://technet.microsoft.com/en-us/library/cc263526(v=office.15).aspx
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • Browser compatibility issues with different versions of IE

    I'm looking for an online resource or book on identifying/troubleshooting JSP browser compatiblility issues focusing on recent versions of IE (5.0 - 6.0).
    Any sugguestions?

    A JSP runs on a server. It is actually a servlet that merely outputs HTML (usually) to the browser. Your browser does not (really) know the difference between a JSP and a static HTML page and PERL cgi generated page. There is no interaction what-so-ever between the JSP portion and your browser. There will not be any books about compatibility issues between JSP and browsers since its a non-issue.
    The previous reply suggesting JavaScript conflicts is entirely true. If you want a flipping nightmare job, write javascript that is compatible on NN 3.0 and above and IE 4.0 and above. It's a godd**ned mess.

  • Many Specific Issues with Mac Performance after Yosemite Upgrade

    I have a MacBook Pro Retina 15”--Late 2013
    Ever since I upgraded to Yosemite, I have experienced the following problems:
    Preview locking up after I attempt to open a document or photo
    None of my files will be visible in certain views (e.g., Download Folder will appear empty)
    Trash and Junk Folders will disappear in Mail
    Spotlight will not search for anything when I attempt to use it
    Google apps (e.g.,  Search, News, Gmail, Maps) will usually not open initially when I try to open them in Safari—will just time out with a message that website will not respond… If I close out the tab, then try to re-open it, it usually works. I also tried them out in Chrome, and they seem to load with no problems.
    Initially I contacted Apple support. They had me delete several cache files, ran disk utility, etc. This seemed to help for a while, but problem returned.
    The next step: I performed a clean installation of Yosemite.  Eventually, the symptoms returned.
    Last step:  I took my computer to the Genius Bar at a local Apple Store.  The tech ran several diagnostics and found no problems.
    Finally, the Genius Bar tech. asked me how often I shut down my Mac;  I told him ‘not very often’.   His recommendation was that I restart my Mac every once in a while… (not specific on frequency)….
    Restarting it every couple of days seems to be the only thing that works…
    Any help with this problem would be greatly appreciated.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
    You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1286 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1 400 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %s more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n    "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /^ +iP.+:$/{ s/://;b0'$'\n'' };/es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^  |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') nextfile;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'G -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex|sudo:" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {Daemons,{Login,All,User}\ agents}\ {load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0;    };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;((PIPESTATUS))&&break;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B3 23;A2 39 57 30;B3 24;B6 23 24 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
    [Process started]
            Part 1 of 8 done at … sec
            Part 8 of 8 done at … sec
            The test results are on the Clipboard.
            Please close this window.
    [Process completed]
    The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
    Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
    12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
    Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Issues with interactivity between component states and page states

    Hi there, I recently downloaded the trial of Catalyst 5.5 and am encountering the following problem:-
    I have many screens in my application and am attempting to get around the 20 state limit by creating custom components that contain multiple states that can be used as screens. So, I have created button links between the component states which work fine but have also created button links to and from the standard states of the application, which dont work upon running/publishing. I'm not quite sure whats wrong here as the button commands are pointing to the right place, i.e. they are pointing firstly to the specific custom component and then the state within the component, but its just not working.
    Is this a trial issue or something deeper?
    I really hope someone can help as apart from this issue I have been very happy with the application but if I can not find a solution theres no point in purchasing it.
    Cheers.

    Ive had the same problem. Im trying to create an interactive e-book but im having problmes with the limit of states. I have now worked out that i have to create custom components to create a sub-state but im finding it difficult to go between sub states. Help anyone?

  • Browser compatibility issue with IE6/7

    Hello,
    I created my webpage in dreamweaver on a MAC.  I have viewed my page(s) A-OK in Safari and firefox however I am being told that my page is not viewing properly on Internet Explorer.  I then found the browser compatibility feature to test the page in Dreamweaver.  What I have found is that I have browser support problems...this is the error from my index page - which is actually on all my pages!
    un-scrollable content bug:
    If one or more absolutely-positioned elements are placed within a relatively positioned element with no assigned dimensions, either no scrollbar will appear at all, or it will not extend far enough to view all of the content. (Note: This bug will not affect your page if the content in the AP element does not extend beyond the height of the viewport.)
    Affects: Internet Explorer 6.0
    Likelihood: Possible
    This bug is on line 56:   <div style="position:relative">
    This issue is on all my pages...please help
    I am just not sure how to solve this problem - I am more of a designer than a coder.  Any help whatsoever to point me in the right direction is most graciously appreciated!!!
    My webpage URL is: lifeforcemd ah yes that is a .com extension - lifeforcemd.com

    Hi kadarusastry,
    This issue is about the browser compatibility.
    Please add your SharePoint site into compatibility view in IE 9 or IE 10.
    Or, use IE 8 mode in browser mode for IE 9 or IE 10.
    About how to add site into compatibility view, you can refer to the link:
    http://support.microsoft.com/kb/2536204
    Note: the settings for IE 9 and IE 10 are same.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Refresh Issues with af:fileDownloadActionListener

    I have a page with has table - (contents from a data control). Row selection is enabled for this table. I have a menu item (download) in this page which invokes a taskflow inside a popup.
    This taskflow has a command button af:commandButton (named Download) and fileDownloadActionListener associated with it and it downloads a file (based on the row selected) and closes the poupup.
    <af:commandButton text="filedownload"
    shortDesc="#{lifecycle_ui_bundle.EXPORT_SRM_LABEL}"
    visible="true"
    id="lcsrmdwnldbtn">
    <af:fileDownloadActionListener filename="#{pageFlowScope.lifecycle_srmexport.exportArchiveFile}"
    contentType="application/force-download; charset=utf-8"
    method="#{pageFlowScope.lifecycle_srmexport.downloadFile}"/>
    </af:commandButton>
    Bean Method:
    public void downloadFile(FacesContext context, OutputStream out)
    throws IOException
    OutputStreamWriter w = new OutputStreamWriter(out, "UTF-8");
    w.write("Hi there!");
    // The stream is automatically closed, but since we wrapped it,
    // we'd better flush our writer
    w.flush();
    This taskflow also has another command button (named Save) it creates a file in /tmp location (based on the row selected) and closes the poupup.
    when you select a row and invoke the menu download, the poupappears with the download and Save command buttons and the clicking on the command button downloads file and closes the popup.
    First time its all proper. but NOw for the second time when i try to select another row from the table, the datacontrol popinter still remembers the old value. This happens only after the use of the Download command button (fileDownloadActionListener) in the popup.
    If i use the save Command , datacomtrol pointer moves correctly to the selected row and i get the correct value of the row.
    How can i refresh the parent page (not the poup) upon clicking of the Doenload Button (After downloading the file).

    Yes the contentDelivery is set to lazyUncached
    <af:popup id="actP2"
    binding="#{pageFlowScope.srm_resourceAction.actionPopup}"
    contentDelivery="lazyUncached" childCreation="deferred">
    <af:dialog title="#{WCTruncator[pageFlowScope.srm_resourceAction.actionPopupTitle]['39']}"
    id="d1"
    type="none"
    helpTopicId="#{pageFlowScope.srm_resourceAction.helpTopicId}">
    <f:facet name="buttonBar">
    <af:panelGroupLayout halign="end" id="pgl1">
    <af:commandButton actionListener="#{pageFlowScope.srm_resourceAction.handleOK}"
    text="#{(pageFlowScope.actionName == 'create') ?
    uib_o_w_srm_UIBundle.CREATE_ACTION_LABEL : uib_o_w_srm_UIBundle.SRM_OK}"
    id="cb5" partialSubmit="true"
    rendered="#{pageFlowScope.actionName ne 'export' and pageFlowScope.actionName ne 'import'}"/>
    <af:commandButton immediate="true"
    text="#{uib_o_w_srm_UIBundle.SRM_CANCEL}" id="cb6"
    visible="#{!(pageFlowScope.actionName == 'about')}"
    rendered="#{pageFlowScope.actionName ne 'export' and pageFlowScope.actionName ne 'import'}">
    <af:clientListener method="srm_hidePopup" type="action"/>
    </af:commandButton>
    </af:panelGroupLayout>
    </f:facet>
    <af:region value="#{bindings.dynamicRegion1.regionModel}" id="r1"/>
    </af:dialog>
    </af:popup>
    Could you please let me know why the datacontrol pointer is not moved to the currently selected row post the invocation of the downloadlistener.
    Edited by: user510156 on Aug 1, 2012 8:44 AM

  • Help with a vertical scroll bar issue with a List component

    hi. i have a basic <s:list> that uses an XMLListCollection as it's data provider and a very basic itemrenderer. when a row in the list is clicked a function gets the list.selectedIndex then populates some text fields with more xml data. that all works fine.. the problem i have is that the vertical scroll bar on the list seems to be "clickable" - just like a row in the list. the scroll bar scrolls normally but when it's clicked the selectedIndex becomes -1 which is not helpful b/c the value -1 is passed to the XMLListCollection.
    any ideas? cheers.

    thanks but still problematic...surely the <s:List> component shouldn't return a value when the scrollbar thumb is clicked? i created a very basic list (see below) and made the list dimensions short enough so that there is a vertical scrollbar and found that when the scrollbar thumb is clicked the trace(event.currentTarget.selectedIndex) returns a number. that's annoying b/c i just want a selectedIndex value for a row that is clicked not the scrollbar.
    any ideas to get around? cheers
    <fx:Script>
    <![CDATA[
    protected function list1_clickHandler(event:MouseEvent):void
    trace(event.currentTarget.selectedIndex);
    ]]>
    </fx:Script>
    <s:List x="162" click="list1_clickHandler(event)" y="276" labelField="@label" width="144" height="153">
    <s:dataProvider>
    <s:XMLListCollection>
    <fx:XMLList xmlns="">
    <node label="one"/>
    <node label="two"/>
    <node label="three"/>
    <node label="four"/>
    <node label="five"/>
    <node label="six"/>
    <node label="seven"/>
    <node label="eight"/>
    <node label="nine"/>
    <node label="ten"/>
    <node label="eleven"/>
    </fx:XMLList>
    </s:XMLListCollection>
    </s:dataProvider>
    </s:List>

  • Browser Compatibility Issue with IE9 and IE 10

    Hi Everybody,
    I have a page which contains pageviewer Webpart, which redirects to the other page the problem is in IE 8 this works good but comes to IE9 and IE 10 the page is not displaying on the page but link is working good. Can any one please give me suggestions on
    this?
    Thanks and Regards,
    kadaruSastry

    Hi kadarusastry,
    This issue is about the browser compatibility.
    Please add your SharePoint site into compatibility view in IE 9 or IE 10.
    Or, use IE 8 mode in browser mode for IE 9 or IE 10.
    About how to add site into compatibility view, you can refer to the link:
    http://support.microsoft.com/kb/2536204
    Note: the settings for IE 9 and IE 10 are same.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Issue with af:tree component

    Hi All,
    I am using JDev 11.1.1.6
    I am creating a tree component with collection model.I want to provide different action to each node,so I have defined an action attribute in the bean
    which I set in the constructor as shown below
    TestTree node1 = new TestTree("node1", "#{TreeBean.action1}");
    Is this the correct approach..This gives me "method not found " error when I click on the node.
    Below is the code for tree component :
    <af:tree value="#{TreeBean.model}" id="t1" var="node"
    styleClass="AFStretchWidth" inlineStyle="height:600.0px;">
    <f:facet name="nodeStamp">
    <af:commandLink text="#{node.label}" id="cl1" immediate="true"
    actionListener="#{node.action}"/>
    </f:facet>
    <f:facet name="pathStamp"/>
    </af:tree>

    Hi Vinay,
    UseCase :
    I want a tree showing navigation links . these navigation links will be used to open a new page in panelTabbed Layout.

  • Absolute Path issue with af:inputFile component

    Hi All,
    I am using an input file component and selecting a file from location "C:/temp.xml".In the code, I am trying to get the absolute path of the file selected and since the input type of this component is "UploadedFile", I have created a variable SourceFile of type "UploadedFile" this is what I am doing to get the path:
    <af:inputFile label="Source File" id="if1"
    value="#{viewScope.UpdateMetadataBb.sourceFile}"
    autoSubmit="true" required="true"
    showRequired="true"/>
    In the Bean:
    UploadedFile source = this.getSourceFile();
    File sourceFile = new File(source.getFilename());
    String path = sourceFile.getAbsolutePath();
    Now when I print the "path" it returns something like "C:/users/Swathi/appdata/roaming/..../text.xml" instead of directly giving "C:/temp.xml", Any ideas?
    Thanks,
    Swathi Patnam

    Hi Timo,
    As you said the InputFile component writes the file in the temporary directory but in my case it is not able to write it in the temp directory.
    I am using Jdeveloper11.1.1.5 and i have created an application and deployed on the SOA Server.Now when i try to get the file, it gives the file not found exception and it shows the path as :- javax.faces.el.EvaluationException: javax.xml.ws.WebServiceException: java.io.FileNotFoundException: D:/Oracle/Middleware/UserProjects/Domains/base_domain/abc.TIFF.
    I have implemented the same application and deployed on the integrated weblogic server and it is working fine but as i have deployed on the SOA Server then it is not able to write the file at the particular location.
    Is there any extra configuration which needs to be done while using the InputFile component on the managed server ??
    Even i have started the SOA Server with the admin rights but no help..
    Even i have used this parameter in web.xml file to store the file in another location but no help :-
    <context-param>
    <description>Directory to store temporary files</description>
    <param-name>org.apache.myfaces.trinidad.UPLOAD_TEMP_DIR</param-name>
    <param-value>C:/tmp/</param-value>
    </context-param>
    Please suggest!!!
    Regards,
    Shah

Maybe you are looking for

  • Issue to export data from sql to excel

    I have MS SQL 2008 Developer version and visual studio 2008. I'm using SSIS Import and Export Wizard on the VS2008 to create a simple package to export data from a table using a sql query to excel file (.xlsx), but I got the following error messages:

  • Adding video to iTunes but keeping it in a folder when iTunes organizes your folder automaticly

    Hi, I've recently added a video to my iTunes librariry (on Windows 7) so that I can view it through my AppleTV, I was able to add it to the library and change it's type from Movie to TV Show but when I look at the folder structure, it puts it to the

  • Password protecting a single MS Word file in Leopard.

    Hi, I have a quick question. Is there a way to password protect or encrypt a single MS Word file in Leopard? I want to encrypt a few sensitive Word doc's but not everything. Thanks- Chris

  • Obtaining JAAS subject in a servlet.

    G'day, There are problems in Java with getting the JAAS subject, as the standard Subject.getSubject() call can return null if called within a privileged action: Subject s = Subject.getSubject(AccessController.getContext()); Subject.doAs(s, new Privil

  • Change of number with existing contract

    I have been receiving regular texts and calls from unknown numbers for months now and I was wondering it it is possible to change my number even though I am on an existing contract? When I block the callers, more and more numbers begin to text/call a