BRTOOLS errno 13 when logged in as user sid adm

Hi,
Just upgraded to 7.2 (14) BRTOOLS, Netweaver on Oracle/UNIX platform.
My brtools open when I'm logged in as ora<sid> user, however they fail with permissions on the Oracle directories when I try and run brtools as user <sid>adm.
I've verified the file permissions against a known working instance on the br files and they are matching.
The error I get is below, I know it must be file permissions somewhere, can someone advise, thanks.
hneccscd01s:s02adm 4% brtools
BR0651I BRTOOLS 7.20 (14)
BR0252W Function stat() failed for '/oracle/S02/saptrace/diag/rdbms/s02/S02/trace/alert_S02.log' at location BrFileStatGet-1
BR0253W errno 13: Permission denied
BR0273W Determination of file status for /oracle/S02/saptrace/diag/rdbms/s02/S02/trace/alert_S02.log failed
BR0252W Function stat() failed for '/oracle/admin/S02/adump' at location BrFileStatGet-1
BR0253W errno 13: Permission denied
BR0273W Determination of file status for /oracle/admin/S02/adump failed
BR0252E Function fopen() failed for '/oracle/S02/112_64/dbs/initS02.ora' at location BrInitOraRead-1
BR0253E errno 13: Permission denied
BR0158E Error reading Oracle profile /oracle/S02/112_64/dbs/initS02.ora
BR0280I BRTOOLS time stamp: 2011-08-26 15.01.42
BR0654I BRTOOLS terminated with errors
Cheers
Richie
SAP Basis

Hi Richie,
Are the environment variables properly set for <sid>adm and ora<sid>?
Try to see if the dot (.) profiles in the home directories of <sid>adm and ora<sid> are consistent.
Also, as ora<sid> recursively change the permissions for /oracle/S02/saptrace to 755 [chmod -R 755 /oracle/S02/saptrace]
Also check the permissions of brtools executables in the /sapmnt/<SID>/exe on the database server.
Normally, they should be something like shown below.
-rwxr-xr-x 1 <sid>adm sapsys 1578637 Feb 20 2011 brrestore
-rwsrwxr-x 1 ora<sid> sapsys 2303924 Feb 22 2011 brtools
-rwsrwxr-x 1 ora<sid> sapsys 4178065 Feb 24 2011 brarchive
-rwsrwxr-x 1 ora<sid> sapsys 4284895 Feb 24 2011 brbackup
-rwsrwxr-x 1 ora<sid> sapsys 5527676 Feb 24 2011 brconnect
-rwxr-xr-x 1 <sid>adm sapsys 4587371 Feb 24 2011 brrecover
-rwxr-xr-x 1 <sid>adm sapsys 5679668 Feb 24 2011 brspace
Br,
Venky.

Similar Messages

When Logging in the user gets "The ID you entered was not found"

I have UCCX v8. All users can log in fine. However, I have created a new user and they are getting "The ID you entered was not found".
1. The user was created in CUCM, extension made available to UCCX, and device associated to RMuser account
2. The user shows up in resoureces and I can assign them to a queue
3. The User shows up in Tools/User Management/User List
4. You can assign the user to a Team
5. The User DOES NOT show up in the Supervisor
I have tried unassociating and re associating the user's device with the RM User account.
I have tried restarting the User Desktop Synchronisation Service.
I have deleted the User acount and recreated it
I have reset the passsword
When the user was deleted they showed up under inactive users in UCCX. I deleted the user from here, recreated the user in CUCM, and the new user showed un in resources. This suggests that synchonisation is workinhg.
Anyone have any other ideas that I can try?

You are not mentioned where you are trying to login is that CAD or Cisco supervisor desktop.
I also got the same error while I tried to login as Supervisor but the same time I am able to login CAD without any issue.
When I checked the user in UCCX it's not added as Supervisor so once I did I am able to login
I did this in UCCX 8.0.2
Hope this will help

When loggged in & browsing as administrator, I can not open picture links. When logged in as user, I can. What is wrong?

I have 2 log in/users on my computer. Parents, and kids. When browsing under the parents section/admin,- I can not open picture links. When logged in & browsing under kids log in/user, I can. What have I done wrong?

Anyone?

Long delay when logging in Network User

Hello,
We are running into a weird problem.
We have an XServe G5 2.0 GHz DP with 5 GB RAM, providing multiple services to a small school.
The Users have Network-based accounts, and are authenticated via OD on the same server.
Lately, Users have started experiencing a very long delay when logging in.
At the login prompt, if they input the wrong password, they get "the shake" right away, which indicates that the authentication speed is rather fast. If they do input the right credentials, nothing happens for 25 - 30 seconds, and then login proceeds as usual, fairly quickly. The machines are normally responsive from there on, i.e. it is not a network performance issue. Also, even if no one is on the server, the first one to log in runs into the same issue, i.e. it is not a server overload issue. Does anyone have an idea what is going on? Any suggestions for a solution will be appreciated.
Best regards,
Alain Chammas

Hi
This could be down to a time sync issue. Are Server and Clients all using the same Network Time Server? Do you see a similar delay when presenting the login window displaying a list of network users? If you did not know this is a computer list mananged preference. Anything unusual in the system.log?
Hope this helps, Tony

OS User SID ADM profile not loading in Windows 2008

Hi Experts ,
We have installed Netweaver 7.o EHp1 BI 7.01 on windows 2008, MS SQL 2008 .
After few days, we are not able to login with the SIDADM user. The error getting is "User profile cannot be loaded"
'The LoadUserProfile call failed with the following error:
The system cannot find the file specified."
We did a domain installation and so the user is a domain user too.
Since this user cannot be loaded , we have problems with transports , becasue few environment variables are related with this user name(dbms-type etc) . So stms transports not running and outputs error.
Kindly advise how I can make this user logging in .
Thanks and Best Regards,
Nibu Antony

> Could you please let know where exactly the Profile file exist.
The profile is a registry hive under HKEY_USERS.
> Also please let me know whether I can add the Environment variables
>
> dbms_type,DIR_LIBRARY,MSSQL_SERVER,MSSQL_DBNAME as system environment variables(Not as user variable) so that I
> can resolve the issue on transports atleast.
Note that the SAP system doesn't run in <sid>adm context but in the context of the user SAPService<SID>.
Was that user maybe (by accident) deleted from the domain and recreated?
I'd open an OSS call and let the support have a look on the system. The "clean" way would be to take a database backup and reinstall the system as homogeneous system copy.
Markus

PI 7.1 can not deploy! ask for user SID adm and password

hi all:
    PI 7.1, NWDS 7.1
    I create a ejb project amd import a WSDL and generate java bean skeleton. after implementation, I choose the EAR project and right click and choose run RUN AS-->Run on server, then choose the server, add project and finish
then a popup window shows and tell me "Please enter the credentials of the SAP administrator <SID>adm", I use J2ee_admin but error occur:
Error while disabling debugging of the server
Error while disabling debugging of the server
Incorrect login information provided
I search the SDN and find no useful link. how to config <SID>adm ?
how to deploy my java proxy? i think this process is so complex!
thank you!

hi Prateek：
    thanks for your information.
   only ask for user and password, no other pop up window.
   i am confused is there any configuration missing?

Error Message when logging on 2nd user on XP

I have an XP system with two users. For the past week or so, an error has been displaying when you log on the 2nd user. The error is an IE explorer window that says "This Web Page can not be displayed" and there is a little red Verizon logo in the upper left corner.
I ran MSConfig on the 2nd user and there is a line to run something called redirector. The command line is:
C:\Program Files\Verizon\McciBrowser.exe -AppKey=Verizon -URL=file://C:\Program Files\Verizon\OfflineUpdate\redirector.htm
I do not have this line in my startup on User1. I also do not have a folder called OfflineUpdate under my Program Files\Verizon which is why it is failing. I suspect that what ever it was removed itself after it ran and a multi-user logon was not considered in the program design. But I'm not certain. I have FIOS Internet, TV and phone. No blackberry or other device that I may sync mail to.
Does anyone have any idea what this is? My plan is to either disable it with MSConfig - or just remove the RUN key from registry but I'd like to have an idea of what it was
Thanks in advance.

Nothing wrong with disabling it in MSConfig for testing reasons.
It causes issues, you can re-enable it.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Scp works when logging with my user id but fails when using another one

Hello all:
I wrote a script that uses scp to transfer specific local files to a server. The script takes the user id and password and pass them as scp's parameters for authentication.
Everything works fine when I uses my own user id to test the script but it fails when I used another id (with ligitimate password) to do the same thing.
I suspect it's a privilege issue. Both ids belong to the same group. Where should I look to fingure this out?
Thanks,
John

SCP is part of SSH. SSH requires the exchange of authorization keys to prevent man-in-the-middle attacks.
When you log in the first time you may see a prompt like:
RSA key fingerprint is 98:2e:d7:e0:de:9f:ac:67:28:d2:42:2e:37:16:58:45.
Are you sure you want to continue connecting (yes/no)?
This might be where your script fails. Since it prompts only the first time, you may just have to do one interactive SSH login to create an entry in ~/.ssh/known_hosts
Or setup User equivalence to omit the exchange of passwords.
You may find the following interesting:
Oracle Linux 5 Howto: Installing and using cURL with support for SCP and SFTP
OL5 Howto: Installing and using cURL with support for SCP and SFTP
see 3) Set up SSH user equivalence for SCP and SFTP

Message (on one account) when logging in: The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database.

After installing the reportservice/database i cannot use the Configuration Manager Console 2012 anymore with my own AD account. (The accounts of my colleagues are stil working)
When i login i get the following message:
The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database. The account must belong to a security role in Configuration Manager. The account must also have
the Windows Server Distributed Component Object Model (DCOM) Remote Activation permission for the computer running the Configuration Manager site server and the SMS Provider.
I checked the following:
I am a administrative user in SCCM (Full Administrator)
I am a member of the administrator group on the server
Deleted HKEY_CURRENT_USER\Software\Microsoft\ConfigMgr10
I tried to start it on multiple workstations and deleted my roaming profile
Any more suggestions?

Hi,
Maybe you could have a look on the below blog.
http://blog.nimbo.com/how-to-disable-user-account-control-in-windows-server-2012/
(Note: Microsoft provides third-party contact information to help you find technical support. This contact information
may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

When logging out of user account iMac will not start back up at login screen.

To prevent guests from using my iMac I frequently "log out" and created a guest account. However when I log out and shut down, my iMac turns on
right back to my desktop not even returning to the "log-in" screen. I tried fixing this under preferences but this did not yield any help as it's still doing
this? I don't understand I can't recall ever having this problem before. Please help! Thanks

Try rebooting into Safe Mode, this will clear some caches. It is possible one (or more) is corrupt. To reboot in Safe Model when you hear the startup tone hold down the Shift Key until you see a progress bar appearing.

Clients get stuck when logging out current user

I'm using ARD 3.1 to control 9 different Macs (from G4's with 10.3.9 to Dual G5's with 10.4.8, all with 3.1 clients, all with several user accounts) in the same company in Germany. I'm connected to the company through an SSH tunnel all the time.
Some of these Macs regulary go to "ARD Not Active" after I log out any current user from the Apple menu on that computer (i. e. if I want to log out the admin and switch back to some normal user).
From my end it then looks as if this computer would be down, but actually the computer is still on and seems to be in some kind of deep sleep that can only be ended by hitting some keys on the keyboard in Germany or sometimes even only by restarting the computer.
This happpens frequently on 3 of these 9 computers. 2 of them have 10.4.8 and 1 has 10.4.6. The same thing also happened all the time with ARD 3.0.
Any idea what this might be and how I could fix this? It's often very annoying because I have to wait for the next day before I can continue to work on these computers.
Thanks and greetings
azdesertman
Mac OS X (10.4.8)

Part of your problem sounds like the energy saver settings are putting the machine to sleep. You might be able to wake them simply by executing a "Wake" command on the computers.
You could also set the energy saver settings to not allow the machines to go to sleep.

Delegated task not listing in the BPEL Portlet when logged in as that user

Hi All,
A task delegated to say a user JCOOPER (which is picked from OID) is not listing in the BPEL Portlet when logged in as user jcooper...
Is there any workaround to solve this issue?The issue persists in PROD environment..Somebdy pls suggest..
Thanks,
ChitraDevi D

Hi All,
Any body pls help out for this issue
Thanks,
ChitraDevi D

Brtools statistic error as sid adm in Oracle 11g

When running brtools statistics as <sid>adm I get this error. When I run it as ora<sid> I do not get this error.
BR0301E SQL error -2133 at location BrOraThrEnable-1, SQL statement:'ENABLE THREADS'
I have oracle client setups in
/oracle/client/10x_64
/oracle/client/11x_64
I have 2 Oracle databases on the Linux(Redhat) server - one version 10.2.0.4 & the other version 11.2.0.2.
Any advice on what I should be looking at to fix this error?

hi Bill,
please check following note.
Note 1449619 - BR*Tools cannot be started on Oracle 11g
Problem 2
The BRCONNECT statistic function cannot be started on Oracle 11g and under the user <sid>adm on Unix platforms. Directly after you call BRCONNECT, a termination occurs with one of the following SQL error messages, for example:
sidadm> brconnect -u / -c -f stats -t all
BR0801I BRCONNECT 7.20 (1)
BR0301E SQL error -2133 at location BrOraThrEnable-1, SQL statement:
'ENABLE THREADS'
BR0806I End of BRCONNECT processing: cedbfuze.sta 2010-04-21 18.11.02
BR0280I BRCONNECT time stamp: 2010-04-21 18.11.02
BR0804I BRCONNECT terminated with errors
solution:
Problem 2
Install Version 5 of Oracle Instant Client 10.2.0.4 (or higher) on the database server.
If you have installed Oracle Instant Client 11g and are still using the standard version of BR*Tools 7.20 (in other words, you are not using the 720_EXT tools), and if Oracle Instant Client 10g is not installed on the database server, you must also create the following soft link:
> cd /oracle/client
> ln -s 11x_64 10x_64
Regards
Edited by: majamil on Feb 22, 2012 10:39 PM

BI Publisher Report can only seen when logged in as Admin

Hi gurus,
We have OBIEE is set up on Windows 2003 server and configured to use Active Directory (AD) authentication. In one of the dashboards, we have a BI Publisher Report embedded. This was working fine until we configured the BI Server to use AD.
After the AD config, when logged in any user other than Administrator, the BI Publisher reprot throws up the error " Login Failed. Please contact Administrator for Username & Password".
All the required roles have been created on BI Server and granted to the requird users. I am at loss with this error.
Any help will be much appreciated.
Regards
Mahesh

Did you create an Open Firmware password as well? If not then just insert the OS X Installer Disc into the optical drive and restart the computer. After the chime press and hold down the 'C' key until the spinning gear appears below the dark gray Apple logo.

Thumbnails do not display when logged in from a second account at the same iMac

Hi,
I am using Lightroom on an iMac with OSX 10.8.2. I have two user accounts. The library is located in a shared users folder, so that either user 1 or user 2 can have access to it (of course not at the same time). The pictures physically reside on an external drive and are recognized as such without any issue.
Here is my problem: Under user 1 everything works perfect. Under user 2 the thumbnails of the pictures are not displayed for some reason. In the develop module user 2 can access the pictures. Nevertheless the thumbnails remain grey.
I have worked in that configuration in LR 3 without any problem. After upgrading to LR 4 the problem started. Upgrading to 4.2 did not solve the problem. Rerendering the thumbnails when logged in as user 2 stalles.
Any help is very much appreciated.

Hi,
It seems to be a known issue. Hope it will be fixed by next update.
Also you can feedback in the link below:
http://blogs.technet.com/b/lync/archive/2012/11/01/lync-app-feedback-you-asked-and-here-it-is.aspx
The workaround is to use Lync Web App to share PPTs. You can see the Thumbnails for Powerpoint slides using Lync Web App.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

BRTOOLS errno 13 when logged in as user sid adm

Similar Messages

Maybe you are looking for