Brushed edits disappear in Viewer from some images

I have some photos for which I can no longer access the post processing edit I made to them.
Specifically it seems to be the brushed edits that are lost. Crops, contrast, etc. are present, but nothing brushed.
If I've just quit Aperture and go back in I see brushed edits in these same phtos for maybe a second as I scan through the viewer, then they don't reappear agin unti I quit/restart Aperture.
If I export one of these photos, the resulting image does not contain the brushed edits either and does contain image level edits such as crop and horizontal adjust.
I suppose this is an issue worthy of Aperture Library repair since I have no idea how many or what photos are specifically having this problem. I just wanted to check in here first before taking the big step. Also I have backups in Time Machine and a Vault though I don't know how far back this goes.

When you get the blank screen, have you tried going to full screen mode or coming back to standard viewing mode if you already are in full screen?
Seems like you are having the 'black screen bug' commented in this forums many times.

Similar Messages

Is there any way to call methods of one view from another

Hi experts,
I am new to webdynpro.I am having some requirement in which I need to call methods of one view from some other view of same component .So is there any way to do this.

Dear Pradeep,
This will solve your problem......( plz 1st read everything ..)
There are 2 views :
i) Mandatory Attributes ' view(V1)
ii) Button' s View..(V2)
1. Create a method in Component Controller.( M1).
2. Goto V2 . In the Action Handler method of Button , call method M1 of component controller.
3. Write your Code in M1 instead of V2 method.
4. Create an EVENT ( E1 ) in component controller.
5. Fire this event from M1 before executing Action Code.
6. Now Add the event handler method of E1 in V1 ( i.e. Mandatory attributes view. ) ..........clear????? .. set "METHOD TYPE" = Event Handler. instead of Method.
7. In this event handler method in V1 , write the "check_mandatory_attribute_view" method.
8. use necessary flags..
Regards ,
Aditya.

Trouble downloading some images from CF card to iPhoto

My iMac was full - no space left on it. I did not know this until I tried to download a 16GB card that was almost full of RAW images from my 50D.
There were approximately 600 images on the card. Around 450 of them downloaded fine to iPhoto. Then I got an error message saying that my hard disk was full, and that I would not be able to download the remaining 150 images until I created room on my computer.
So, I went thru my image files and deleted about 200 photos, figuring that would create plenty of room for the remaining 150 that I still had on the card (the images I deleted were the same file size as the ones I was trying to download, so it should have freed up enough space).
When I tried to download the remaining 150 images, only about 5 or 10 downloaded successfully, then I got the same error message saying that my hard disk was full.
So, I again deleted more images, then tried to download the remaining images. This time, my computer wouldn't accept any of the images. I didn't even get the error message - iPhoto simply froze up when I tried to download the images remaining on the card.
I later deleted a few thousand images - to ensure that there would be plenty of room on my computer for new images. I then downloaded another card with about 600 images on it (from the same 50D). I had no problem downloading all 600+ of the images on this card. However, when I went and put the other card back in the card reader and tried to download those remaining 140 images, iPhoto simply froze up again and I couldn't download any of them.
WHen I put the CF card in my 50D, I can view those 140 images on my LCD screen without any problems. In fact, all of the info is intact for each of the images. But when I try to download to iPhoto, iPhoto freezes up and won't accept them.
I do not use any other photo program, so importing them into something like Lightroom or Aperture is not an option. I am also not interested in paying money to upgrade to a newer version of iPhoto, so I want to keep this within the iPhoto 08 that I currently use.
What I want to know is, does anyone know how I can get these images downloaded into iPhoto? Is there some type of software recovery program that is free, that will work directly with iPhoto?
Any help that anyone can provide would be greatly appreciated.
+PS: I will be away from my computer for most of the weekend, so if I don't respond to anyone's post promptly, my apologies. I'll review all posts and respond to them when I again have internet access in a couple days.+

Thank you, Terrance.
I have cleared a ton of space on my hard drive. This is evidenced by the fact that I have recently uploaded about 2,000 photos onto my iPhoto app. Each photo is from a Canon 50D, and is a RAW file, so each image is right around the 20mb sie. These are huge files, and yet I've been able to download a couple thousand recently. Yet I still cannot download the 140+- images from that Compact Flash memory card that gave me trouble previously. It seems to me like somehow iPhoto and that particular card are having trouble "talking to" each other ever since I tried to "force" iPhoto to accept more than it could hold at that time.
Also, you mention using an external hard drive. I shoot only in RAW. When I import a photo into iPhoto, and edit it in iPhoto, iPhoto remembers what the original photo was like before I edited it. So, I can always go back to an image and simply ask iPhoto to revert the image to the original RAW file, and it does so.
My fear with using an external hard drive is that when I export an image from iPhoto to the external, that the external drive won't "remember" what the photo looked like before I edited it. Can I save the actual RAW file to the external, or do I need to export the photos as jPegs? If I can only export a jPeg, then I will lose much of the extremely detailed information that the original RAW image file contains.

Aperture 3.2.4 macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

“Hi Kirby, thanks a lot for your answer.
I got one answer, from DMoore, saying:
“Try Safe boot and then restart with only Aperture open. Still doent work write back with more details like Ram, HD capacity/free space. Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
Safe boot http://support.apple.com/kb/HT1564
Starting up into Safe Mode does several things:
1 It forces a directory check of the startup volume.
2 It loads only required kernel extensions (some of the items in /System/Library/Extensions).
3 In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
4 It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
5 It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
6 It disables all startup items and login items (Mac OS X v10.4 or later).
7 Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
But I understand your questions, so I’ll try to answer them;
"loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
I can see images in the Browser, so it only happens in the Viewer(s).
I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
Did Aperture work before?
Yes it worked ok for a while, but I only purchased it on 24th May.
If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
But I have not changed the default Preview settings in Aperture Preferences.
My macbookpro details:
2.7 Ghz Intel Core i7
Memory: 8 Gb 1333 MHz DDR3
Hard Drive capacity 499.25 GB
Available 387.36 GB
I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
I hope this helps you to understand more.
Thank you for trying to help me.
Tony

SharePoint 2013 List View with query string filter stops working after editing view from browser

I have created one list definition in which I have added one list view which will filter data from query string paramater
So when I am creating list from my list definition, view with query string filter is working fine.
But when I am modifying view from UI(I am not changing any thing , just opening "Modify View" page and then click on "Save" button), view gets stop working means it's not filtering data based on query string
Any suggestion what I am missing?
Below is my list view schema
<View BaseViewID="11" Type="HTML" TabularView="FALSE" WebPartZoneID="Main" DisplayName="$Resources:OIPLBScoreCard,viewFilterTasksByTarget;" MobileView="True" MobileDefaultView="False" Url="FilteredTasks.aspx" SetupPath="pages\viewpage.aspx" DefaultView="FALSE" ImageUrl="/_layouts/15/images/issuelst.png?rev=23">
<Toolbar Type="Standard" />
<ParameterBindings>
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
<ParameterBinding Name="TargetId" Location="QueryString(TargetId)" />
</ParameterBindings>
<JSLink>hierarchytaskslist.js</JSLink>
<XslLink Default="TRUE">main.xsl</XslLink>
<JSLink>clienttemplates.js</JSLink>
<RowLimit Paged="TRUE">100</RowLimit>
<ViewFields>
<FieldRef Name="Body"></FieldRef>
<FieldRef Name="Title"></FieldRef>
<FieldRef Name="StartDate"></FieldRef>
<FieldRef Name="DueDate"></FieldRef>
</ViewFields>
<ViewData>
<FieldRef Name="PercentComplete" Type="StrikeThroughPercentComplete"></FieldRef>
<FieldRef Name="DueDate" Type="TimelineDueDate"></FieldRef>
</ViewData>
<Query>
<Where>
<Eq>
<FieldRef Name="oipscTargetLookup" LookupId="TRUE"/>
<Value Type="Lookup">{TargetId}</Value>
</Eq>
</Where>
</Query>
</View>
I have one lookup field from "Target List" in my source list and I want to filter data based on that lookup field.

Hi JayJT,
The Miscellaneous is located in the contact list that you used for the connection.
So , you need to edit the page, then edit the contact list that you used, in the web part properties of the contact list, you will find Miscellaneous, then expand it and select ‘Server Render’ .
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Aperture 3.4.1 won't edit some images

I upgraded my iPhoto library to v9.4 and all seems to be ok. I then installed Aperture 3.4.1. Some of my photos I can edit ok in Aperture, but many of them cannot be edited even though taken with the same camera on the same day. Where the histogram normally comes up there is the message "iPhoto externally edited image". In the past I've done most of my editing in Photoshop Elements, with only a few edited in iPhoto. There doesn't seem to be any pattern to the Aperture problem, however. Some images that have been edited in PS can be edited in Aperture, and some that I haven't touched cannot be edited in Aperture. I'm pretty sure the same applies to iPhoto editing.
Any ideas on how to get around this problem?
Malcolm

I just answered my own question with a little help from a related discussion that popped up when I posted this. The block on editing apparently applies to anything modified in iPhoto. But duplication to create a new Aperture version creates an editable image.
Thanks.
Malcolm

Some images don't transfer from RH8 to the Word output

Why is it that some images don't transfer from the RH8 file to my Word output when I generate?
They do transfer to the Flash Help, but not to Word.
Some of them are small images - just shots of icons or tools - and others are quite a bit larger.
It takes me at least another hour to format the Word document after the output.

Hi Patti,
I have had similar problems of images "softly and suddenly vanishing away" during export from RoboHelp to Word. I never really solved the problem, but I did find some useful tips.
First you shouldn't embed your images; in the Printed Documentation Wizard you should select "Link to sub-directory"
This has the advantage that lost images are now replaced by a small red cross -- easier to find when reviewing.
Next, in Word, try Edit>Links. If you are lucky you will see something like this:
Notice that some links have a Source File of ../Images; they are the ones I was missing. For some reason the path to the image file is moved up one level.
I never found out why, but the workaround was simple: copy the entire Images directory and paste it one level higher in the directory hierarchy. A waste of disk space, to be sure, but it worked. The grabs above show Word2003 and RH8.
Hope this helps,
--- Derek

Cannot edit (or even view) some photos...

Recently I got a new Olympus FE-190 6 megapixel camera. (My previous camera was a 4 MP). The first roll that I imported into iPhoto (version 6.0.6) worked fine until I try to edit or view a larger image. The thumbnails appear, but when I click to edit a photo from my new camera, a grey screen appears where a larger photo should be with an exclamation mark surrounded by a dotted-line square. It only does this for the 6 MP photos, which are 2816 x 2112 pixels. Also, these photos are the only ones I cannot put into a slideshow in iDVD. Any suggestions would be of much help.
Thanks,
Geoff

I'm having the same problem, my pictures are not on
my camera anymore so I'm going to have to try the
hard way. I'll keep you posted!
I found this article: iphoto edit gray exclamation
http://docs.info.apple.com/article.html?artnum=303473
It has a few different ideas to solve the problem. All I had to do was select the thumbnail, go to photos in menu bar, select revert to original! Problem solved.
imacg4 Mac OS X (10.4.9)

Column View won't display some images downloaded by browser

I have used the "Preview" in Column View to display images for some time and some images downloaded to folders will never display. The wheel just spins in the display area and CMD-i doesn't display the image either. If I open the image in the Preview application it displays! There is no detectable difference in the files that do and don't display in Col. View. I can get any image to show up by opening a graphic application and doing a "Save As" to reprocess the image and replace the balky one. But, this is not right that I should have to do this. I cannot determine whether a downloded image is going to have a problem or not as some from the same websites are OK sometimes and some are not. I had the problem with OS 10.2.8 too. Changing from iCab to Safari does not help.

ACK!!!! Cancel all that because it happens using Firefox too. I have NO IDEA what in the world is happening to my system that would cause web pages to load incompletely.
What a drag.

Some images in safari do not open. View images in preferences is enabled.

some images in safari do not open. View images in preferences is enabled.

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.

I am unable to view some images sent by email or on certain websites. How do i fix this.

I am unable to view some images sent by email or on certain websites. How do i fix this.

Hi. I'm not technically skilled, but based on the reply from the other guy re. AdBlock Plus being the common denominator to everyone's problems, I checked my Filter settings (ABP version 2.0.3) and deselected 'Fanboy's List (English)'. With this deselected and ABP still 'enabled' the messages work as usual.
I only had this problem using Virgin Mail, so must be the way they now present their mail that conflicts with 'Fanboy's List (English)' filter. I guess I'll need toi choose another filter.

Adjustment's brush strokes disappearing from adjustment brick.

Good day,
I am having a problem with the brush strokes from my skin smoothing and levels adjustments disappearing (perhaps others also but I haven't noticed those). I have spent a lot of time brushing in the skin smoothing on many images with great results. But twice now, the skin smoothing (and levels where I used those) adjustment's brush strokes have disappeared from the adjustment brick for all of the images. The brick still is there and still is checked on/active but no adjustment is being applied (since it no longer sees or contains the brush strokes). Somehow the internal link between the brush strokes and the adjustment brick have been broken, or the brush strokes deleted themselves en masse.
Has anybody seen this behavior before? Any ideas on why this is happening and if I can re-connect the brush strokes to the images (assuming the brush strokes are still inside the Aperture database somewhere)?
I just now upgraded to Aperture 3.1.2 from the most recent build (I upgrade regularly). The images are high resolution scanned from transparencies as 16bit tiff files. I use a managed library with no referenced images in the library. I have repaired permissions, repaired the database, and rebuilt the database with no positive results.
Please help.
Thanks!
Nils

Thanks for the suggestion and the quick reply too. I've tried it but it seems to only partially work in that I can stamp the first adjustment into a new version of the image and invert it. However I don't seem to be able to get it to stamp it as 2nd curve adjustment. It seems to overwrite the current curve adjustment, if there is one, or create it if there isn't one.
Thus if there is a way to stamp an existing curve adjustment to a new curve brick that would do the trick. Does anyone have any suggestions?
Thanks again for the help.
Best regards

Card Images Become "Unopenable" on Notebook After Changing View From "Details" to "Medium Icons"

I've been viewing & placing image files into folders directly from my camera card over the past few days on my new notebook. It was becoming very tedious as I had to view each image seperately to see what it was, before I had the bright idea to try to "VIEW" them differently. In the process of changing the "VIEW" from "DETAILS" to "MEDIUM ICONS", some of the the pictures which had previously been fine the few times I had taken the card in & out of the notebook, became HP Icons instead of the picture's thumbnail. I didn't realize this at first because the pictures were broken up into months (luckily), I was going through them chronilogically, and it wasn't until I got to images from the 26th of that month that I came across this problem. I clicked the HP logo for these images and got the message "SORRY, WE CANNOT OPEN THIS PHOTO". I immediately panicked and closed the folders and took the card out to put back into my camera to see if it showed up on there. Sure enough where those images had been was replaced with a big question mark and the message "Unidentified Image" when I selected it to view. I immediately went through every picture on the camera to see if this had happened to images from other months, but it had not. I had no clue what had caused this as all the images on the card/camera had remained intact the previous times I had put the card in the notebook (I'm constantly viewing images on the camera & usually go through all of them in passing daily). I had no idea what had caused this, and was afraid to put the card back into the notebook. After trying to explain this on some camera forums I needed to know the exact messages I received trying to view those images. Put the card in, took it out, and no more pictures were effected. A day passed and I figured I could work on filing pictures from the other months until I could solve the problem. I went through the camera first, and all the other images were fine. Put the card in and was presented with the "DETAILS" view again, so I changed it from that to "MEDIUM ICONS". MISTAKE. BIG MISTAKE. The same thing happened to several pictures from that file, which I immediately saw, closed the file, and took the card out. The images which had been fine moments before were now question marks on my camera. Genius that I am had to do it twice to figure out what did it. After that I tried changing the view back to "DETAILS", which of course didn't work.Prior to that I didn't think it was the camera, but I wasn't sure if it was the card or the notebook. I've had the camera 3 years, no problem. I've had the card 6 months, no problem. I've only had the notebook a few weeks, and had only started using the card reader a few days before this happened. Any help would be greatly appreciated as most of the pictures effected were irreplacable Christmas pictures.
Just in case it helps my camera is a Canon PowerShot SX150 IS and the card is Wintec filemate Professional Plus 64GB.

Thank you for responding,
I have tried copying the affected images after they began to display the problem, but they opened (or rather didn't) the same as before I copied them.
I was using the default program to view the pictures, HP Connected Photo. However after this occurred I attempted to view them with Windows Photo viewer, with the same result.
Unfortunately I do not have an external card (but if i knew it would restore the photos I would definitely get one).
I don't think I have a virus, and the notebook is still so new I have the trial of McAfee running (which, for what it's worth, says "Your computer is secure". My internet service is also protected.
As stated I was copying images from the card for several days (and taking the card out & inserting it back into my camera after each use) with no altered images showing up either on the camera or the notebook. It wasn't until I changed the way I was viewing the files from details to thumbnails (medium icons) that some of the images from that file were affected. (The pictures had automatically been seperated into files by month, so there were 6 files. Only the file with the thumbnails I switched how I was viewing had altered images. The other 5 files remained fine, until I did the same with November's file, at which time some of those images became unviewable as well).

Editing some descriptions and changing some images within podcast section.

Hi,
Editing some descriptions and changing some images within our podcast section.
I don't have the information needed to log into our feed-burner site, and was wondering if maybe there was another way I could edit the podcast section?

If Feedburner is taking its information from another feed you can update that feed, unless you have enabled 'Smartcast' in Feedberner which over-rides the original. In that event you can only amend it in Feedburner (either way you can't do it in iTunes).
You will need to take steps to discover your login; I don't know whether Feedburner Support are likely to be able to help you.

I have some loops from acid 5 which I have dragged in a folder to the loop browser. Some of them retain the folder name in the View: and some don't. I have had some that seem to go in but I can't find them. Where should I look?

I have some loops from acid 5 which I have dragged in a folder to the loop browser. Some of them retain the folder name in the View: and some don't. I have also had some that seem to go in but I can't find them. If I try to add them again, I get a msg that they are already there. Where should I look?

It may be best to recreate the folder and the smart playlists from scratch.
tt2

Brushed edits disappear in Viewer from some images

Similar Messages

Maybe you are looking for