BSOD on Server 2008 STANDARD SP2

Assistance with BSOD on Dell R710 Server running Server 2008 STANDARD SP2
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Communication was lost to this server (Not a power outage). It was discovered with a blue screen with the above error. A memory dump was created with reference STOP 0x0000000D1. NETIO.SYS Address 8075FA37.
The machine rebooted after the dump and upon logon the following message was displayed:
Problem signature:
Problem Event Name:          BlueScreen
OS Version:           6.0.6002.2.2.0.272.7
Locale ID:              1033
Additional information about the problem:
BCCode: d1
BCP1:     000000D4
BCP2:     00000002
BCP3:     00000000
BCP4:     8075FA37
OS Version:           6_0_6002
Service Pack:         2_0
Product: 272_3
Files that help describe the problem:
C:\Windows\Minidump\Mini011315-01.dmp
Link to one drive for the dump files:
https://onedrive.live.com/?cid=D0667AD0A7D6788C&id=D0667AD0A7D6788C!180

* Bugcheck Analysis *
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 000000d4, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000000, value 0 = read operation, 1 = write operation
Arg4: 8075fa37, address which referenced memory
Debugging Details:
Unable to load image \SystemRoot\system32\DRIVERS\Teefer.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Teefer.sys
*** ERROR: Module load completed but symbols could not be loaded for Teefer.sys
READ_ADDRESS: GetPointerFromAddress: unable to read from 81d6d874
Unable to read MiSystemVaType memory at 81d4d420
000000d4
CURRENT_IRQL: 2
FAULTING_IP:
NETIO!StreamGetCalloutContext+d4
8075fa37 833800 cmp dword ptr [eax],0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT_SERVER_MINIDUMP
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
TRAP_FRAME: 9bd152f4 -- (.trap 0xffffffff9bd152f4)
ErrCode = 00000000
eax=000000d4 ebx=000000d0 ecx=9bd15374 edx=00046e28 esi=000001a0 edi=c0000017
eip=8075fa37 esp=9bd15368 ebp=9bd15378 iopl=0 nv up ei pl nz na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010206
NETIO!StreamGetCalloutContext+0xd4:
8075fa37 833800 cmp dword ptr [eax],0 ds:0023:000000d4=????????
Resetting default scope
LAST_CONTROL_TRANSFER: from 8075fa37 to 81c83ecd
STACK_TEXT:
9bd152f4 8075fa37 badb0d00 00046e28 00000000 nt!KiTrap0E+0x1c5
9bd15378 8075fac6 001f3516 00000000 00000107 NETIO!StreamGetCalloutContext+0xd4
9bd153ac 80761508 001f3516 00000000 00000107 NETIO!StreamGetCalloutAndDataContexts+0x33
9bd15428 80750580 00000014 a1756830 9bd15734 NETIO!StreamProcessCallout+0x63
9bd15480 8073c44b 00000014 9bd15734 9bd1563c NETIO!ProcessCallout+0xee
9bd154b0 8073c4ab 00000014 d6b06208 9bd15734 NETIO!ProcessFastCalloutClassify+0x2c
9bd15590 8075ed12 00000014 9bd15734 9bd1563c NETIO!KfdClassify+0xd8
9bd15618 8075effb 00000014 9bd15734 9bd1563c NETIO!StreamClassify+0x94
9bd15744 8075f436 fe1fd800 00000014 9bd1576c NETIO!StreamCommonInspect+0x19b
9bd15770 8ccf74c7 fe1fd818 fe160b00 a264ed98 NETIO!WfpStreamInspectReceive+0xab
9bd15798 8ccce96f fe160b08 fe160bf4 a264ed98 tcpip!TcpInspectReceive+0x52
9bd157d8 8cccf24d fe160b08 9bd157f8 9bd1582c tcpip!TcpTcbFastDatagram+0x2ca
9bd15838 8cccd686 8572df40 00160b08 9bd1589c tcpip!TcpTcbReceive+0xf8
9bd15890 8cccf099 8572df40 85720000 00000000 tcpip!TcpMatchReceive+0x1ec
9bd158d8 8cccf0ff 8572df40 85720000 85720018 tcpip!TcpPreValidatedReceive+0x22d
9bd158f4 8cccdaa0 8572df40 85720000 9bd15930 tcpip!TcpReceive+0x2d
9bd15904 8cce5bfb 9bd15918 c000023e 00000000 tcpip!TcpNlClientReceiveDatagrams+0x12
9bd15930 8cce5628 8cd3cebc 9bd15984 c000023e tcpip!IppDeliverListToProtocol+0x49
9bd15950 8cce5a78 8cd3ccd0 00000006 9bd15984 tcpip!IppProcessDeliverList+0x2a
9bd159a8 8cce7290 8cd3ccd0 00000006 00000000 tcpip!IppReceiveHeaderBatch+0x1eb
9bd15a38 8cce3798 86573400 00000000 9bd15a00 tcpip!IpFlcReceivePackets+0xbe1
9bd15ab4 8cce30a9 86572420 85a88978 00000000 tcpip!FlpReceiveNonPreValidatedNetBufferListChain+0x6e3
9bd15adc 806d10b0 86572420 85a88978 00000000 tcpip!FlReceiveNetBufferListChain+0x104
9bd15b10 806c3d25 00573af8 85a88978 00000000 NDIS!ndisMIndicateNetBufferListsToOpen+0xab
9bd15b38 806c3c9c 00000000 86573008 86177388 NDIS!ndisIndicateSortedNetBufferLists+0x4a
9bd15cb4 8060457f 85814368 00000000 00000000 NDIS!ndisMDispatchReceiveNetBufferLists+0x129
9bd15cd0 8062fccd 85814368 85a88978 00000000 NDIS!ndisMTopReceiveNetBufferLists+0x2c
9bd15cec 8062fca4 86572c10 85a88978 00000000 NDIS!ndisFilterIndicateReceiveNetBufferLists+0x20
9bd15d08 9465cc13 86572c10 85a88978 00000000 NDIS!NdisFIndicateReceiveNetBufferLists+0x1b
WARNING: Stack unwind information not available. Following frames may be wrong.
9bd15d30 9465d22f 86177388 86188700 94661108 Teefer+0xac13
9bd15d60 9465d494 8618b7c0 87792358 00000000 Teefer+0xb22f
9bd15d7c 81e0c01c 94661108 97fe8bf9 00000000 Teefer+0xb494
9bd15dc0 81c74eee 9465d420 94661108 00000000 nt!PspSystemThreadStartup+0x9d
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
NETIO!StreamGetCalloutContext+d4
8075fa37 833800 cmp dword ptr [eax],0
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: NETIO!StreamGetCalloutContext+d4
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: NETIO
IMAGE_NAME: NETIO.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 49e0209d
FAILURE_BUCKET_ID: 0xD1_NETIO!StreamGetCalloutContext+d4
BUCKET_ID: 0xD1_NETIO!StreamGetCalloutContext+d4
Followup: MachineOwner
Bug Check Code 0xD1: https://msdn.microsoft.com/en-us/library/windows/hardware/ff560244(v=vs.85).aspx
The BSOD is probably caused by teefer.sys driver. Based on searches, I found that it belongs to Sygate firewall driver system driver. So, either you update it or you remove this software. You can also contact its vendor/developer for assistance.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Similar Messages

Unable to join Mac OS X 10.7.4 to windows server 2008 Standard SP2 Domain

Hi everyone,
I have an issue regarding the above, i have to connect several MBK pro using OS X 10.7.4 to a Windows Server 2008 Standard Service Pack 2.
I tried joining it using Static IP configurations, and using Domain names but it returns an error as Unable to connect to server and an error code 5302.
Please does anybody have a hint to this issue.....your help will be most appreciated.
Best Regards,
Iven.

I have verified every required settings closely and had it cross checked over and over again with the network administrator himself, every settings was in place but when i tried to bind with the domain it returns server not found.
I also ping the server and it works....i verified the RJ45 cable...all is fine.
i tried updating from 10.7.3 to 10.7.4 but the problem persists.
Infact originally i had to bind the Mac OS X 10.7.3 and 10.7.4 to a Windows Server 2008 Standard SP2, it didn't worked then afterwards i tried to bind them to a Windows Server 2008 R2....it worked on 2 but on the third it didn't.
So does anybody have an idea or can anyone confirm me if Windows Server 2008 Standard SP2 is compatible with Mac OS X 10.7.4???

Update error of SQL Server 2012 enterprise running on Windows server 2008 standard SP2 (32 bits)

Hi there;
I have a windows server 2008 SP2 (32bits) in which I have an instance of SQL Server
2008 and another of 2012.
My Windows server 2008 installed the following updates; (see below).
(KB2898858),(KB2909921),(KB890830),(KB2898869),(KB2911502),(KB2901126),
(KB2916036),(KB2862973),(KB2901113)
After the machine was re-started, I was not abble to connect
to the instance of SQL Server 2012. I am able
to connect to the instance of SQL Server 2008.
The error message I get when I atemp to connect can be found
at the end of the list of updates below.
Do I need to uninstall an update? if so, which one and how do I do that?
Thanks Gabriel I. Ruiz
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2898858)
Installation date: ‎2/‎12/‎2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898858
Cumulative Security Update for Internet Explorer 9 for Windows Server 2008 (KB2909921)
Installation date: ‎2/‎12/‎2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2909921
Windows Malicious Software Removal Tool - February 2014 (KB890830)
Installation date: ‎2/‎12/‎2014 11:41 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/890830
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista and Windows Server 2008 x86 (KB2898869)
Installation date: ‎2/‎12/‎2014 11:40 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898869
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2911502)
Installation date: ‎2/‎12/‎2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2911502
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista, and Windows Server 2008 x86 (KB2901126)
Installation date: ‎2/‎12/‎2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901126
Security Update for Windows Server 2008 (KB2916036)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2916036
Security Update for Windows Server 2008 (KB2862973)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2862973
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2901113)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901113
===================================
Cannot connect to HAVANA\HAVANA_2012_1ST.
===================================
The client was unable to establish a connection because of an error during connection initialization process before login. Possible causes include the following: the client tried to connect to an unsupported version of SQL Server; the server was too busy
to accept new connections; or there was a resource limitation (insufficient memory or maximum allowed connections) on the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
Server Name: HAVANA\HAVANA_2012_1ST
Error Number: 233
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock)
at System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate)
at System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate)
at System.Data.SqlClient.TdsParser.SendPreLoginHandshake(Byte[] instanceName, Boolean encrypt)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
No process is on the other end of the pipe

Hi,
Check if SQL Server service is running fine. I doubt you may have changed the user account password used for SQL Server service. After restarting the machine, you also need to update the user account of SQL Server service in Configuration
Manager. Re-type the user account name and password under Log on tab and see how it helps.
Thanks.
Tracy Cai
TechNet Community Support

Error 0x800F081f when trying to add features or roles on Windows Server 2008 Standard SP2

Hello
When I try to add ANY feature or role on our Windows 2008 Server I get the following
"Attempt to install <feature> failed. (error value: 0x800F081F)
The source for the specified package or file was not found"
As our Windows Server 2008 is not R2 I have tried running the update readiness tool but this has not helped.
http://support.microsoft.com/kb/947821
The CheckSUR.log shows no errors after running the readiness tool.

Might try a repair install.
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Need solution for solving TIME_WAIT in TCP/IP ports in Windows Server 2008 Standard Service Pack 2

In one of our windows machine( OS : Windows Server 2008 Standard (Service Pack 2)-32bit), we are facing TIME_WAIT in all the TCP/IP ports and it is not getting closed.
On analyzing the issue, we found solution for this from the below link,
https://support.microsoft.com/en-us/kb/2553549
In this page, we are able to get the hotfix for Windows Server2008 R2 SP1 but i can't able to get for Windows Server 2008 Standard SP2(32bit). If we try to apply the hotfix vailable for SP1, it is showing "The update does not apply to your System".
Kindly provide us the solution for solving TIME_WAIT issue in the machine.
OS Details : Microsoft Windows Server 2008 Standard
Version : 6.0.6002 SP2 Build 6002
System Type : 32 bit(x86-based PC)
Awaiting for the response.
Thank you,
Pushpalatha.A

Download correct version from Microsoft Update Catalog. Run it with elevated rights.
M.

Failed SQL express install on Server 2008 Standard

I am attempting to install Visual Web Developer 2008 Express Edition on a Server 2008 Standard SP2, which all ready includes SQL Server 2008. The installer includes SQL Server Express, which is failing without any error codes.
Visual Web Developer only partly installs. The tools folder has a shortcut to Remote Debugger, as the only component to succeed. It seems this is the newest version of Visual Studio compatible with Server 2008 Standard.
My real goal is to create an empty Win Forms site bound to its existing SQL Server 2008 and then drop my completed development site pages into the production server. I need a successful complete install.
Thanks,
Kurt

Hello,
Based on your description, you had install SQL Server 2008 Standard edition, and you try to install the Visual Web Developer 2008 Express Edition SP1 with SQL Server 2008 Express, but SQL Server install failed with this error message: "A component could not
be downloaded".
When install SQL Server express, it will download files from website, please verify the issue is not caused by the network issue.
You can try to review the SQL Server Setup log for more details. The dafult path is:
C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\LOG\.
You can also try to download the SQL Server 2008 express from the following link and install separately.
http://www.microsoft.com/en-in/download/details.aspx?id=1695
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Upgrating SQL Server 2008 R2 SP2 to SQL Server 2014 Standard "UpgradeFeatureSpecificRules: KJRTMUpgradeBlockRule"

I've been searching for HOURS how to resolve this issue:
I am trying to upgrade SQL Server 2008 R2 (Express Edition with advanced services) to SQL SERVER 2014 Standard edition, my first issue was to update the 2008 R2 to Service pack 2 on the first FEATURE RULE TEST, at this time on it's keep saying this:
======================================================================================
Rule Check Result
Rule "SQL Server 2008 R2 Service pack 2 or later is requered for upgrade.: failed.
This SQL Server 2008 R2 features that have been selected to be upgraded to SQL Server 2014 are not at the require service pack. To continue with this upgrade, install SQL Server 2008 Service Pack 2 or lager to the selected instance and the shared features.
=====================================================================================
This is the Configuration Report issue:
Microsoft SQL Server 2014 - System Configuration Check Report
UpgradeFeatureSpecificRules: SQL Server 2014 Setup configuration checks for rules group 'UpgradeFeatureSpecificRules'
KJRTMUpgradeBlockRule
Checks if the currently selected SQL Server 2008 R2 features to upgrade are at the supported service pack. Failed The SQL Server 2008 R2 features that have been selected to be upgraded to SQL Server 2014 are not at the
required service pack. To continue with this upgrade, install SQL Server 2008 Service Pack 2 or later to the selected instance and the shared features.
====================================================================================
I try after hours and finally did install the Upgrade Advisor and got not issues, the last choice I was to uninstall the Management Studio because in other upgrade express versions got blocked, but in this new version of SQL Server 2014 I don't see any way
out!!!
Thanks.

Hi again
This is the scenario:
-I have installed the SQL SERVER 2008 R2 With Advanced services (version 10.50.1600.1), and now my guest decide to upgrade to an STARNDARD version which nowadays Microsoft is offering the 2014 version.
-As all IT Support and DBA I try to upgrade to SQL 2014 to check and see with requirements were missing or updates. The first check report only ask to upgrade to SQL SERVER 2008 R2 SP2 (version 10.51.2500.0) which I found in the optional update list and
resolved immediately with the Windows Update service.
-Finally, I realise doing the discovery report (suggested in the last post) is that Windows update only download the service pack 2 for SQL Server 2008 instead of the 2008 R2 (I downloaded manually) then the version was upgrade to 10.52.4000.0
Next time I might download the updates manually and not loosing a lot hours with Windows Update, another point very important is that when SQL Server 2008 R2 is installed, create the Microsoft SQL Server 2008 folder at all programas in the Startup menu:
with the SQL Server Installation Center, but there is not one R2, when you execute this one just show the 2008 installed features.
Now we are on 12.0.2000.8
Thanks anyway and all of you for your interest!!!

Windows 8.1 RDP Issues with Windows Server 2008 Standard.

I have an issue maintaining an RDP connection from 64-bit windows 8.1 (standard and pro) to 32-bit Windows Server 2008 Standard. Initial connection is normal, and as long as I am constantly typing on the link, for the most part it stays up. However
if I do not keep typing, or go to another desktop program for a few minutes, and then go back, the following happens:
If I am typing into notepad (or some screen that does not require windows to be refreshed) I can continue to do so, so the connection has not been lost, however if I try to do something that requires more extensive exchange of information (like file
- open, or even trying to pull up the start menu), the connection pauses with about half the screen refreshed, sometimes after about 30 seconds a bit more of the screen fills out, but otherwise the connection is not responsive. Then after about 2 minutes,
RDP reconnects, at which point I am back to "normal". I have conducted some tests and made inquiries of others attempting to connect to the server.
1) I can connect to other Windows (servers 2008 R2 and 2012) with no connection issues from this PC
2) I can connect to the 32-bit server with no issues using Windows Vista Ultimate and Windows 7 from the same location as the WIndows 8.1 PC
3) When I do a network speed test while having these issues I see full download and upload speeds, so I am not experiencing intermittent internet issues.
4) No-one else from other locations (not of course using Windows 8.1) has any issues using RDP to the 32-bit Windows Server Standard.
These various tests seem to eliminate my network connection, and other operating systems, from the equation, and point to RDP issues on windows 8.1 connecting to the older OS. I noticed in the September updates, a case 2989039 which seemed to point
to similar issues when using UDP through Remote Desktop Gateway. That update is on my machine, and my connection has the setting Automatically detect RD Access Gateway server settings.
Any thoughts anyone?

Hi RonaldRenaud,
If my understanding is right, this RDP issue only occur in the connection between Windows 8.1 and Server 2008.
Please check if you have installed the update kb2984006.
To resolve this issue caused by update 2989039, install update rollup 2984006. For more information, please refer to the following KB.
http://support2.microsoft.com/kb/2989039/en-us
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Frequenet dead locks in SQL Server 2008 R2 SP2

Hi,
We are experiencing frequent dead locks in our application. We are using MSSQL Server 2008 R2 SP2 version. When our application is configured for 5-6 app servers, this issue is occurring frequently.
But, when the same application is used with the MSSQL Server 2008 R2 or SQL Server 2012, we don't see the dead lock issue. From the error lock and sql trace, the error message is thrown for the database table JobLock. We have a stored procedure to insert/update
for the above table when the job moves from one service to other. The same procedure works fine when used with the 2008 R2 and SQL Server 2012 Version.
Is the above issue related to the hotfix from the below url?
http://support.microsoft.com/kb/2703275
Following error message is seen frequently in the log file.
INFO : 03/24/2014 10:26:30:290 PM: [00007900:00005932] [Xerox.ISP.Workflow.ManagedActivity.PersistInTransaction] System.Data.SqlClient.SqlException (0x80131904): Transaction (Process ID 62) was deadlocked on lock resources with another process and has been
chosen as the deadlock victim. Rerun the transaction.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.Practices.EnterpriseLibrary.Data.Database.DoExecuteNonQuery(DbCommand command)
   at Microsoft.Practices.EnterpriseLibrary.Data.Database.ExecuteNonQuery(DbCommand command, DbTransaction transaction)
   at Xerox.ISP.DataAccess.Data.Utility.ExecuteNonQuery(TransactionManager transactionManager, DbCommand dbCommand)
   at Xerox.ISP.DataAccess.Data.SqlClient.SqlActivityProviderBase.ActivityReady(TransactionManager transactionManager, Int32 start, Int32 pageLength, Nullable`1 ActivityID, Nullable`1 JobId, String ContentUrl, Nullable`1 PrevWorkStep, Nullable`1
CurrentWorkStep, String Principal, Nullable`1 Status, Nullable`1 ServerID, String HostName, Nullable`1 LockUserID, Nullable`1& ErrorCode, Byte[]& Activity_TS)
   at Xerox.ISP.DataAccess.Domain.ActivityBase.ActivityReady(Nullable`1 ActivityID, Nullable`1 JobId, String ContentUrl, Nullable`1 PrevWorkStep, Nullable`1 CurrentWorkStep, String Principal, Nullable`1 Status, Nullable`1 ServerID, String HostName,
Nullable`1 LockUserID, Nullable`1& ErrorCode, Byte[]& Activity_TS, Int32 start, Int32 pageLength)
   at Xerox.ISP.DataAccess.Domain.ActivityBase.ActivityReady(Nullable`1 ActivityID, Nullable`1 JobId, String ContentUrl, Nullable`1 PrevWorkStep, Nullable`1 CurrentWorkStep, String Principal, Nullable`1 Status, Nullable`1 ServerID, String HostName,
Nullable`1 LockUserID, Nullable`1& ErrorCode, Byte[]& Activity_TS)
   at Xerox.ISP.Workflow.ManagedActivity.<>c__DisplayClass2f.<ActivityReady>b__2d()
   at Xerox.ISP.Workflow.ManagedActivity.PersistInTransaction(Boolean createNew, PersistMethod persist)
ClientConnectionId:9e44a64f-5014-4634-9cee-4581e1b9c299
I look forward to the suggestions to get the issue resolved. Your input is much appreciated.
Thanks,
Keshava.

If you are having deadlock trouble in your SQL Server instance, this recipe demonstrates how to make sure deadlocks are logged to the SQL ServerManagement Studio SQL log appropriately using
the DBCC TRACEON, DBCC TRACEOFF, and DBCC TRACESTATUS commands. These functions enable, disable, and check the status of trace flags.
To determine the cause of a deadlock, we need to know
the resources involved and the types of locks acquired and requested. For this kind of information, SQL Server provides
Trace Flag 1222 (this flag supersedes 1204, which was frequently used in earlier versions of SQL Server.)
DBCCTRACEON(1222,
-1);
GO
With this flag enabled, SQL Server will provide output in the form of a deadlock graph, showing the executing statements
for each session, at the time of the deadlock; these are the statements that were blocked and so formed the conflict or cycle that led to the deadlock.
Be aware that it is rarely possible to guarantee that deadlocks will never occur. Tuning for deadlocks
primarily involves minimizing the likelihood of their occurrence. Most of the techniques for minimizing the occurrence of deadlocks are similar to the general techniques for minimizing blocking problems.

Data Committed instead of Rollback after Deadlock Error in SQL Server 2008 R2 (SP2)

We're having a strange issue which is occurring only with one Customer having SQL Server 2008 R2 (SP2).
Basically we have multiple threads uploading data and when an error occurs (like deadlock or any other error). The deadlock victim (process/transaction) is rolledback (from .NET). However the rollback command is not reaching SQL Server as it doesn't show
in the trace (through SQL Profiler).
To make things worse, not only the transaction is not being rolled back but the INSERTs executed before the error are being somehow committed, leaving the database in an inconsistent state.
This is only produced in one environment.
Any idea what the issue could be?

All statements are executed with in a Transaction. Under the same scenario this code works perfectly fine for 1000s of customers. Only one customer has this issue.
You need to capture profiler to check transaction scope.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

SMS_SRS_REPORTING_POINT - Error retrieving folders with SCCM 2012 and SQL Server 2008 R2 SP2

Hi:
According to all the Reporting Services logs my Reporting Point was setup correctly. When I try and run any report I see the entries below in the srsrp.log on the SQL Server. The report names show up in the Console but when I right any of the
listed reports I get errors and no report runs.
I am running SQL Server 2008 R2 SP2 on a remote server. SQL is installed on its own server. There is no firewall between the Configuration Manager server and SQL Server.
Thanks.
Mark
(!) Error retrieving folders - [A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance
name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because
connected host has failed to respond.)].   SMS_SRS_REPORTING_POINT
1/25/2013 9:15:07 AM    4532 (0x11B4)
No folder configuration information found.
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Next security configuration at [1/25/2013 9:22:42 AM]
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Root Folder exists
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Successfully checked that the SRS web service is healthy on server DBSCCM.LOCAL
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
SRSRP registry key change notification triggered.
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:16 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:16 AM
4532 (0x11B4)
Timed Out...
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Reporting Services URL from Registry [http://dbsccm/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Reporting Services is running
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ManagedDesktops_MD1
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
(!) Error retrieving folders - [A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance
name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because
connected host has failed to respond.)].   SMS_SRS_REPORTING_POINT
1/25/2013 9:17:40 AM    4532 (0x11B4)
No folder configuration information found.
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Next security configuration at [1/25/2013 9:22:42 AM]
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Root Folder exists
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Successfully checked that the SRS web service is healthy on server DBSCCM.LOCAL
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Timed Out...
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Reporting Services URL from Registry [http://dbsccm/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Reporting Services is running
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ManagedDesktops_MD1
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)

Hi:
Windows Firewall is off on both systems.
I can ping the Configuration Manager server from the SQL Server by netbios name, ip address and fully qualified domain name.   I can ping the SQL Server from the Configuration Manager server by netbios name, ip address and fully qualified domain
name.
I have uninstalled and installed the Reporting Point Service a couple of times and everything looks fine according to the logs after the install finishes but these errors only appear each time I try and Run a report.
Mark

How to upgrade Windows Server 2008 Foundation to Windows Server 2008 Standard

I have a Dell server with Windows Server 2008 Foundation installed. I am now on a larger network which has their own servers for authentication and the Windows Server 2008 Foundation will not let join a domain with more than 15 users. I was told that I needed
to upgrade Windows server 2008 foundation to Windows server 2008 Standard and that process can be done "in place" but I can't find how do do it. I called Dell and they said they basically said they didn't know what I was talking about.
How do I do this?

According to the first one you can perform an in-place upgrade.
Introduction to Windows Server 2008 Foundation
http://technet.microsoft.com/en-us/library/dd459191(WS.10).aspx
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]

Unhandeled exception occurred while clicking on new query button in Manaement studio in SQL server 2008 R2 SP2.

I am getting below exception while clicking on new query button in SSMS of SQL server 2008 R2 SP2.
I am thinking to reinstall Complete Management Tools. is it worth to give a try on production server? What can be the fix?
Exception Details-
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SqlServer.Management.UI.VSIntegration.ShellCodeWindowControl.CreateCWWindow()
at Microsoft.SqlServer.Management.UI.VSIntegration.ShellCodeWindowControl.OnHandleCreated(EventArgs a)
at System.Windows.Forms.Control.WmCreate(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at Microsoft.SqlServer.Management.UI.VSIntegration.ShellTextEditorControl.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
AppIDPackage
Assembly Version: 10.0.0.0
Win32 Version: 10.50.4000.0 ((KJ_PCU_Main).120628-0827 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/AppIDPackage.DLL
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
Microsoft.SqlServer.SqlTools.VSIntegration
Assembly Version: 10.0.0.0
Win32 Version: 10.50.4000.0 ((KJ_PCU_Main).120628-0827 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.SqlTools.VSIntegration.DLL
Microsoft.VisualStudio.Shell.Interop
Assembly Version: 7.1.40304.0
Win32 Version: 7.10.6071
CodeBase: file:///C:/Windows/assembly/GAC/Microsoft.VisualStudio.Shell.Interop/7.1.40304.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.Shell.Interop.dll
Microsoft.VisualStudio.OLE.Interop
Assembly Version: 7.1.40304.0
Win32 Version: 7.10.6070
CodeBase: file:///C:/Windows/assembly/GAC/Microsoft.VisualStudio.OLE.Interop/7.1.40304.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.OLE.Interop.dll
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
SqlWorkbench.Interfaces
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/SqlWorkbench.Interfaces.DLL
Microsoft.SqlServer.SqlTDiagM
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1539 )
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.SqlServer.SqlTDiagM/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.SqlTDiagM.dll
Microsoft.SqlServer.Instapi
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.SqlServer.Instapi/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.Instapi.dll
EnvDTE
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.1826 (QFE.050727-1800)
CodeBase: file:///C:/Windows/assembly/GAC/EnvDTE/8.0.0.0__b03f5f7f11d50a3a/EnvDTE.dll
Microsoft.VisualStudio.Shell
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1826 (QFE.050727-1800)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualStudio.Shell/2.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.Shell.dll
Microsoft.VisualStudio.Shell.Interop.8.0
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.1826 (QFE.050727-1800)
CodeBase: file:///C:/Windows/assembly/GAC/Microsoft.VisualStudio.Shell.Interop.8.0/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.Shell.Interop.8.0.dll
Microsoft.SqlServer.Management.SDK.SqlStudio
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.Management.SDK.SqlStudio.DLL
Microsoft.DataWarehouse.SQM
Assembly Version: 10.0.0.0
Win32 Version: 10.50.4000.0 ((KJ_PCU_Main).120628-0827 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/Microsoft.DataWarehouse.SQM.DLL
Microsoft.SqlServer.Management.SqlStudio.Explorer
Assembly Version: 10.0.0.0
Win32 Version: 10.50.4000.0 ((KJ_PCU_Main).120628-0827 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.Management.SqlStudio.Explorer.DLL
Microsoft.SqlServer.Management.Controls
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.Management.Controls.DLL
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
ObjectExplorer
Assembly Version: 10.0.0.0
Win32 Version: 10.50.4000.0 ((KJ_PCU_Main).120628-0827 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/ObjectExplorer.DLL
System.Design
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Design/2.0.0.0__b03f5f7f11d50a3a/System.Design.dll
Microsoft.SqlServer.Management.UserSettings
Assembly Version: 10.0.0.0
Win32 Version: 10.50.4000.0 ((KJ_PCU_Main).120628-0827 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.Management.UserSettings.DLL
SqlMgmt
Assembly Version: 10.0.0.0
Win32 Version: 10.50.4000.0 ((KJ_PCU_Main).120628-0827 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/SqlMgmt.DLL
Microsoft.SqlServer.Management.Sdk.Sfc
Assembly Version: 10.0.0.0
Win32 Version: 10.50.4000.0 ((KJ_PCU_Main).120628-0827 )
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.SqlServer.Management.Sdk.Sfc/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.Management.Sdk.Sfc.dll
ConnectionDlg
Assembly Version: 10.0.0.0
Win32 Version: 10.50.4000.0 ((KJ_PCU_Main).120628-0827 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/ConnectionDlg.DLL
Microsoft.VisualStudio
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1826 built by: QFE
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualStudio/2.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.dll
System.Drawing.Design
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing.Design/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.Design.dll
Microsoft.VisualStudio.Designer.Interfaces
Assembly Version: 1.0.5000.0
Win32 Version: 1.1.4322.573
CodeBase: file:///C:/Windows/assembly/GAC/Microsoft.VisualStudio.Designer.Interfaces/1.0.5000.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.Designer.Interfaces.dll
Microsoft.SqlServer.RegSvrEnum
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1539 )
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.SqlServer.RegSvrEnum/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.RegSvrEnum.dll
Microsoft.SqlServer.Management.Reports
Assembly Version: 10.0.0.0
Win32 Version: 10.50.4000.0 ((KJ_PCU_Main).120628-0827 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.Management.Reports.DLL
Microsoft.SqlServer.Management.SqlStudio.Migration
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.Management.SqlStudio.Migration.DLL
Microsoft.SqlServer.Smo
Assembly Version: 10.0.0.0
Win32 Version: 10.50.4000.0 ((KJ_PCU_Main).120628-0827 )
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.SqlServer.Smo/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.Smo.dll
Microsoft.NetEnterpriseServers.ExceptionMessageBox
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1539 )
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.NetEnterpriseServers.ExceptionMessageBox/10.0.0.0__89845dcd8080cc91/Microsoft.NetEnterpriseServers.ExceptionMessageBox.dll
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
Microsoft.SqlServer.Management.SqlStudio
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.Management.SqlStudio.DLL
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
Microsoft.SqlServer.ConnectionInfo
Assembly Version: 10.0.0.0
Win32 Version: 10.50.4000.0 ((KJ_PCU_Main).120628-0827 )
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.SqlServer.ConnectionInfo/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.ConnectionInfo.dll
Microsoft.SqlServer.Management.RegisteredServers
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1539 )
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.SqlServer.Management.RegisteredServers/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.Management.RegisteredServers.dll
Microsoft.SqlServer.SqlClrProvider
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1539 )
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.SqlServer.SqlClrProvider/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.SqlClrProvider.dll
8h2zzgtz
Assembly Version: 10.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
Microsoft.SqlServer.SString
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1539 )
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.SqlServer.SString/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.SString.dll
0seaoek4
Assembly Version: 10.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
Microsoft.SqlServer.Diagnostics.STrace
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1539 )
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.SqlServer.Diagnostics.STrace/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.Diagnostics.STrace.dll
System.Transactions
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
System.EnterpriseServices
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
Microsoft.SqlServer.SqlEnum
Assembly Version: 10.0.0.0
Win32 Version: 10.50.4000.0 ((KJ_PCU_Main).120628-0827 )
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.SqlServer.SqlEnum/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.SqlEnum.dll
Microsoft.SqlServer.BatchParserClient
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1539 )
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.SqlServer.BatchParserClient/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.BatchParserClient.dll
Microsoft.SqlServer.BatchParser
Assembly Version: 10.0.0.0
Win32 Version: 2009.0100.1600.01 ((KJ_RTM).100402-1540 )
CodeBase: file:///C:/Windows/assembly/GAC_32/Microsoft.SqlServer.BatchParser/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.BatchParser.dll
msvcm80
Assembly Version: 8.0.50727.4940
Win32 Version: 8.00.50727.4940
CodeBase: file:///C:/Windows/WinSxS/x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4940_none_d08cc06a442b34fc/msvcm80.dll
Microsoft.SqlServer.Dmf
Assembly Version: 10.0.0.0
Win32 Version: 10.50.4000.0 ((KJ_PCU_Main).120628-0827 )
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.SqlServer.Dmf/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.Dmf.dll
Microsoft.SqlServer.PolicyEnum
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1539 )
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.SqlServer.PolicyEnum/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.PolicyEnum.dll
ObjectExplorerReplication
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/ObjectExplorerReplication.DLL
Microsoft.SqlServer.Sqm
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.Sqm.DLL
ihzu3zbs
Assembly Version: 10.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Management
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Management/2.0.0.0__b03f5f7f11d50a3a/System.Management.dll
SQLEditors
Assembly Version: 10.0.0.0
Win32 Version: 10.50.4000.0 ((KJ_PCU_Main).120628-0827 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/SQLEditors.DLL
Microsoft.VisualStudio.TextManager.Interop
Assembly Version: 7.1.40304.0
Win32 Version: 7.10.6070
CodeBase: file:///C:/Windows/assembly/GAC/Microsoft.VisualStudio.TextManager.Interop/7.1.40304.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.TextManager.Interop.dll
Microsoft.SqlServer.Management.MultiServerConnection
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1539 )
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.SqlServer.Management.MultiServerConnection/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.Management.MultiServerConnection.dll
RadLangSvc
Assembly Version: 10.0.0.0
Win32 Version: 10.50.4000.0 ((KJ_PCU_Main).120628-0827 )
CodeBase: file:///E:/Program%20Files%20(x86)/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/RadLangSvc.DLL
Microsoft.VisualStudio.Package.LanguageService
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1826 (QFE.050727-1800)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualStudio.Package.LanguageService/2.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.Package.LanguageService.dll
Microsoft.SqlServer.Management.SqlParser
Assembly Version: 10.0.0.0
Win32 Version: 10.50.4000.0 ((KJ_PCU_Main).120628-0827 )
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.SqlServer.Management.SqlParser/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.Management.SqlParser.dll
Microsoft.SqlServer.GridControl
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase: file:///C:/Windows/assembly/GAC_32/Microsoft.SqlServer.GridControl/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.GridControl.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Hi,
How many SQL Server instances were installed on the server?
Have you tried to connect this instance from another machine using SQL Server Management Studio?
1. Try the solution by Zack1223 in the link below. Delete the shell folder in C:\Users\<username>\AppData\Roaming\Microsoft\Microsoft SQL Server\100\Tools\ and check the result.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/dc67c38e-6749-4908-a9a8-d181c12b7e91/sql-server-management-studio-express-2005-keeps-crashing
2. Try to download and install shared management objects to fix this issue. Download here:
http://www.microsoft.com/en-us/download/details.aspx?id=30440
Refer to this thread:
http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/9125eaae-13f5-42b1-861f-e81e2b46c1de
Hope it helps.
Tracy Cai
TechNet Community Support

Create linked server between MS SQL Server 2008 standard edition to MS SQL Server 2008 express edition

For the captioned issue, is it possible? We have successfully created linked server between 2 MS SQL server 2008 standard edition, but failed for the standard and express edition. Is there any trick to setup? Thanks.

Hello,
SQL Server Management Studio Express Edition may not allow to create a linked server, but the workaround is to use the T-SQL. You can use sp_addlinkedserver and sp_addlinkedsrvlogin.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Is it possible to install sql server 2008 standard edition in windows server 2008 enterprise edition?

hi,
Please help me..
is it possible to install sql server 2008 standard edition in windows server 2008 enterprise edition?
will any problem arise?

Hiya,
Yes it it possible. No there will not be any problems.
Short and simple :)

BSOD on Server 2008 STANDARD SP2

Similar Messages

Maybe you are looking for