BSOD on Server 2012 running dfs namespace and dfs replication roles with deduplication
Hello,
I have recently setup 2 dfsn & dfsr servers, both 2012 one physical the other virtual.
The idea is to have one server as primary and the other as a failover \ DR.
The primary server is virtual and connects via mpio \ iscsi to a dell san, using the provided dell DSM Drivers.
The secondary server is physical with local disk for storage.
I copy files to a namespace setup to always prefer the primary server, these files are then replicated across to the secondary.
I have also turned on deduplication on both servers to get the most out of the available storage.
This has been working well for 6 months or so, there have however been 2-3 occasions where the primary virtual server has crashed and blue screened causing the DFSR database to undergo a full consistency check.
The bug check errors i have managed to extract from the Memory.dmp and mini dump are as follows:
* Bugcheck Analysis
REFERENCE_BY_POINTER (18)
Arguments:
Arg1: 0000000000000000, Object type of the object whose reference count is being lowered
Arg2: fffffa80379a3070, Object whose reference count is being lowered
Arg3: 0000000000000002, Reserved
Arg4: ffffffffffffffff, Reserved
The reference count of an object is illegal for the current state of the object.
Each time a driver uses a pointer to an object the driver calls a kernel routine
to increment the reference count of the object. When the driver is done with the
pointer the driver calls another kernel routine to decrement the reference count.
Drivers must match calls to the increment and decrement routines. This bugcheck
can occur because an object's reference count goes to zero while there are still
open handles to the object, in which case the fourth parameter indicates the number
of opened handles. It may also occur when the object?s reference count drops below zero
whether or not there are open handles to the object, and in that case the fourth parameter
contains the actual value of the pointer references count.
Debugging Details:
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x18
PROCESS_NAME: dfsrs.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff800999ee0d7 to fffff8009985a440
STACK_TEXT:
fffff880`0bf3fb48 fffff800`999ee0d7 : 00000000`00000018 00000000`00000000 fffffa80`379a3070 00000000`00000002 : nt!KeBugCheckEx
fffff880`0bf3fb50 fffff800`99c33529 : fffffa80`379a3070 fffff8a0`0244adc0 00000000`000017e4 0000001b`930b60d8 : nt! ?? ::FNODOBFM::`string'+0x38605
fffff880`0bf3fb90 fffff800`99859453 : fffffa80`4063db00 fffffa80`4063db00 fffff880`0bf3fcc0 00000000`00000001 : nt!NtClose+0x239
fffff880`0bf3fc40 000007ff`5e8d2cda : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
0000001b`9069f398 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x000007ff`5e8d2cda
STACK_COMMAND: kb
FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+38605
fffff800`999ee0d7 cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+38605
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 51a966cd
IMAGE_VERSION: 6.2.9200.16628
BUCKET_ID_FUNC_OFFSET: 38605
FAILURE_BUCKET_ID: 0x18_OVER_DEREFERENCE_nt!_??_::FNODOBFM::_string_
BUCKET_ID: 0x18_OVER_DEREFERENCE_nt!_??_::FNODOBFM::_string_
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x18_over_dereference_nt!_??_::fnodobfm::_string_
FAILURE_ID_HASH: {eaf19261-0688-f327-a17d-6f7960ac4ebd}
Followup: MachineOwner
rax=0000000000000000 rbx=ffffffffffffffff rcx=0000000000000018
rdx=0000000000000000 rsi=fffffa80379a3070 rdi=00000000fffc000c
rip=fffff8009985a440 rsp=fffff8800bf3fb48 rbp=fffffa80379a3040
r8=fffffa80379a3070 r9=0000000000000002 r10=fffffa8030d89190
r11=fffffa804063db00 r12=00000000000017e4 r13=0000000000000000
r14=fffff8a00a548f90 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00000246
nt!KeBugCheckEx:
fffff800`9985a440 48894c2408 mov qword ptr [rsp+8],rcx ss:0018:fffff880`0bf3fb50=0000000000000018
Child-SP RetAddr : Args to Child
: Call Site
fffff880`0bf3fb48 fffff800`999ee0d7 : 00000000`00000018 00000000`00000000 fffffa80`379a3070 00000000`00000002 : nt!KeBugCheckEx
fffff880`0bf3fb50 fffff800`99c33529 : fffffa80`379a3070 fffff8a0`0244adc0 00000000`000017e4 0000001b`930b60d8 : nt! ?? ::FNODOBFM::`string'+0x38605
fffff880`0bf3fb90 fffff800`99859453 : fffffa80`4063db00 fffffa80`4063db00 fffff880`0bf3fcc0 00000000`00000001 : nt!NtClose+0x239
fffff880`0bf3fc40 000007ff`5e8d2cda : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13 (TrapFrame @ fffff880`0bf3fc40)
0000001b`9069f398 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x000007ff`5e8d2cda
start end module name
fffff800`987b1000 fffff800`987ba000 kd kd.dll Thu Jul 26 03:30:34 2012 (5010ABCA)
fffff800`99800000 fffff800`99f4c000 nt ntkrnlmp.exe Sat Jun 01 04:13:17 2013 (51A966CD)
fffff800`99f4c000 fffff800`99fb8000 hal hal.dll Wed Oct 24 04:03:21 2012 (50875A79)
fffff880`00a00000 fffff880`00a34000 ataport ataport.SYS Thu Jul 26 03:29:04 2012 (5010AB70)
fffff880`00a34000 fffff880`00a51000 lsi_sas lsi_sas.sys Fri May 11 20:40:21 2012 (4FAD6B25)
fffff880`00a51000 fffff880`00a5e000 serenum serenum.sys Thu Jul 26 03:30:13 2012 (5010ABB5)
fffff880`00a5e000 fffff880`00a6c000 fdc fdc.sys Thu Jul 26 03:30:15 2012 (5010ABB7)
fffff880`00a7b000 fffff880`00adb000 volmgrx volmgrx.sys Thu Jul 26 03:29:59 2012 (5010ABA7)
fffff880`00adb000 fffff880`00ae4000 intelide intelide.sys Thu Jul 26 03:29:52 2012 (5010ABA0)
fffff880`00ae4000 fffff880`00af3000 PCIIDEX PCIIDEX.SYS Thu Jul 26 03:29:09 2012 (5010AB75)
fffff880`00af3000 fffff880`00b56000 md3dsm md3dsm.sys Wed Aug 22 22:14:46 2012 (50354BC6)
fffff880`00b56000 fffff880`00b87000 msdsm msdsm.sys Sat Oct 05 04:32:09 2013 (524F8839)
fffff880`00b87000 fffff880`00ba0000 vmci vmci.sys Tue May 01 02:14:27 2012 (4F9F38F3)
fffff880`00ba0000 fffff880`00bb5000 vsock vsock.sys Fri Aug 30 20:25:34 2013 (5220F1AE)
fffff880`00bb5000 fffff880`00bcf000 mountmgr mountmgr.sys Thu Jul 26 03:29:33 2012 (5010AB8D)
fffff880`00bcf000 fffff880`00bd9000 atapi atapi.sys Thu Jul 26 03:30:33 2012 (5010ABC9)
fffff880`00bd9000 fffff880`00bf0000 vmxnet3n61x64 vmxnet3n61x64.sys Fri Sep 27 10:40:11 2013 (5245527B)
fffff880`00bf0000 fffff880`00bfa000 pnpmem pnpmem.sys Thu Jul 26 03:30:11 2012 (5010ABB3)
fffff880`00c40000 fffff880`00c9f000 mcupdate_GenuineIntel mcupdate_GenuineIntel.dll Thu Jul 26 03:30:12 2012 (5010ABB4)
fffff880`00c9f000 fffff880`00cfb000 CLFS CLFS.SYS Thu Jul 26 03:29:39 2012 (5010AB93)
fffff880`00cfb000 fffff880`00d1e000 tm tm.sys Thu Jul 26 03:29:01 2012 (5010AB6D)
fffff880`00d1e000 fffff880`00d33000 PSHED PSHED.dll Thu Jul 26 05:53:53 2012 (5010CD61)
fffff880`00d33000 fffff880`00d3d000 BOOTVID BOOTVID.dll Thu Jul 26 03:30:22 2012 (5010ABBE)
fffff880`00d3d000 fffff880`00dbc000 CI CI.dll Thu Mar 28 03:30:42 2013 (5153B962)
fffff880`00dbc000 fffff880`00de1000 rasl2tp rasl2tp.sys Thu Jul 26 03:23:16 2012 (5010AA14)
fffff880`00e00000 fffff880`00e49000 spaceport spaceport.sys Sat Oct 05 04:32:08 2013 (524F8838)
fffff880`00e49000 fffff880`00e61000 volmgr volmgr.sys Thu Jul 26 03:29:22 2012 (5010AB82)
fffff880`00e61000 fffff880`00ea9000 vm3dmp vm3dmp.sys Wed Oct 09 05:25:53 2013 (5254DAD1)
fffff880`00eb5000 fffff880`00f41000 cng cng.sys Thu Oct 11 06:17:34 2012 (5076566E)
fffff880`00f41000 fffff880`00f5b000 raspppoe raspppoe.sys Thu Jul 26 03:24:55 2012 (5010AA77)
fffff880`00f5c000 fffff880`00f99000 mpio mpio.sys Sat Sep 28 04:37:24 2013 (52464EF4)
fffff880`00f99000 fffff880`00fd3000 md3utm md3utm.sys Wed Aug 22 22:14:56 2012 (50354BD0)
fffff880`00fd3000 fffff880`00fef000 intelppm intelppm.sys Tue Nov 06 03:55:02 2012 (50988A16)
fffff880`01000000 fffff880`0106d000 ACPI ACPI.sys Thu Sep 20 07:09:16 2012 (505AB30C)
fffff880`01075000 fffff880`010d8000 msrpc msrpc.sys Thu Jul 26 03:28:37 2012 (5010AB55)
fffff880`010d8000 fffff880`0119a000 Wdf01000 Wdf01000.sys Sat Jun 22 04:13:05 2013 (51C51641)
fffff880`0119a000 fffff880`011aa000 WDFLDR WDFLDR.SYS Sat Jun 22 04:14:38 2013 (51C5169E)
fffff880`011aa000 fffff880`011c1000 acpiex acpiex.sys Thu Jul 26 03:25:57 2012 (5010AAB5)
fffff880`011c1000 fffff880`011cc000 WppRecorder WppRecorder.sys Thu Jul 26 03:29:07 2012 (5010AB73)
fffff880`011cc000 fffff880`011d6000 WMILIB WMILIB.SYS Thu Jul 26 03:30:04 2012 (5010ABAC)
fffff880`011d6000 fffff880`011f7000 raspptp raspptp.sys Thu Jul 26 03:23:13 2012 (5010AA11)
fffff880`01400000 fffff880`0140d000 vdrvroot vdrvroot.sys Thu Jul 26 03:27:29 2012 (5010AB11)
fffff880`0140d000 fffff880`01424000 pdc pdc.sys Fri Mar 01 04:58:34 2013 (5130357A)
fffff880`01424000 fffff880`0143e000 partmgr partmgr.sys Wed Jan 09 04:01:42 2013 (50ECEBA6)
fffff880`01444000 fffff880`0153f000 NDIS NDIS.SYS Sat Jun 15 06:11:35 2013 (51BBF787)
fffff880`0153f000 fffff880`015ae000 NETIO NETIO.SYS Thu Oct 11 06:16:20 2012 (50765624)
fffff880`015ae000 fffff880`015b8000 msisadrv msisadrv.sys Thu Jul 26 03:28:02 2012 (5010AB32)
fffff880`015b8000 fffff880`015f5000 pci pci.sys Thu Jul 26 03:27:43 2012 (5010AB1F)
fffff880`01800000 fffff880`01816000 datascrn datascrn.sys Thu Jul 26 03:29:13 2012 (5010AB79)
fffff880`01816000 fffff880`01824000 cbafilt cbafilt.sys Thu Jul 26 03:29:05 2012 (5010AB71)
fffff880`01824000 fffff880`0186c000 msiscsi msiscsi.sys Mon Feb 03 16:23:09 2014 (52EFC26D)
fffff880`0186c000 fffff880`01877000 kdnic kdnic.sys Thu Jul 26 03:27:41 2012 (5010AB1D)
fffff880`01877000 fffff880`01889000 umbus umbus.sys Thu Jul 26 03:27:39 2012 (5010AB1B)
fffff880`01889000 fffff880`018a9000 i8042prt i8042prt.sys Thu Jul 26 03:28:50 2012 (5010AB62)
fffff880`018a9000 fffff880`018b8000 kbdclass kbdclass.sys Thu Jul 26 03:28:47 2012 (5010AB5F)
fffff880`018b8000 fffff880`018c7000 mouclass mouclass.sys Thu Jul 26 03:28:47 2012 (5010AB5F)
fffff880`018c7000 fffff880`018e5000 parport parport.sys Thu Jul 26 03:29:53 2012 (5010ABA1)
fffff880`018e5000 fffff880`018fd000 serial serial.sys Thu Jul 26 03:30:01 2012 (5010ABA9)
fffff880`018fd000 fffff880`01952000 storport storport.sys Mon Feb 03 16:23:24 2014 (52EFC27C)
fffff880`01952000 fffff880`019b2000 fltmgr fltmgr.sys Thu Jul 26 03:30:09 2012 (5010ABB1)
fffff880`019b2000 fffff880`019e0000 quota quota.sys Thu Jul 26 03:29:14 2012 (5010AB7A)
fffff880`019e0000 fffff880`019f4000 dfsrro dfsrro.sys Thu Jul 26 03:29:13 2012 (5010AB79)
fffff880`019f4000 fffff880`01a00000 BATTC BATTC.SYS Thu Oct 11 06:19:58 2012 (507656FE)
fffff880`01a00000 fffff880`01a2c000 tunnel tunnel.sys Thu Jul 26 03:23:04 2012 (5010AA08)
fffff880`01a2c000 fffff880`01a3b000 CompositeBus CompositeBus.sys Thu Jul 26 03:28:03 2012 (5010AB33)
fffff880`01a3b000 fffff880`01a45000 vmgencounter vmgencounter.sys Thu Jul 26 03:27:58 2012 (5010AB2E)
fffff880`01a45000 fffff880`01c2a000 Ntfs Ntfs.sys Sun Jan 26 23:28:35 2014 (52E59A23)
fffff880`01c2a000 fffff880`01c45000 ksecdd ksecdd.sys Thu Sep 20 07:09:16 2012 (505AB30C)
fffff880`01c45000 fffff880`01c56000 pcw pcw.sys Thu Jul 26 03:28:44 2012 (5010AB5C)
fffff880`01c56000 fffff880`01c60000 Fs_Rec Fs_Rec.sys Thu Jul 26 03:30:08 2012 (5010ABB0)
fffff880`01c60000 fffff880`01c8f000 ksecpkg ksecpkg.sys Thu Oct 11 06:16:46 2012 (5076563E)
fffff880`01c8f000 fffff880`01cc0000 cdrom cdrom.sys Thu Jul 26 03:26:36 2012 (5010AADC)
fffff880`01cc0000 fffff880`01d2b000 dedup dedup.sys Sat Oct 05 04:31:38 2013 (524F881A)
fffff880`01d2b000 fffff880`01d3a000 vmrawdsk vmrawdsk.sys Sun Dec 15 03:36:38 2013 (52AD23C6)
fffff880`01d3a000 fffff880`01d47000 BasicRender BasicRender.sys Thu Jul 26 03:28:51 2012 (5010AB63)
fffff880`01d47000 fffff880`01d53000 mssmbios mssmbios.sys Thu Jul 26 03:29:19 2012 (5010AB7F)
fffff880`01d53000 fffff880`01d64000 discache discache.sys Thu Jul 26 03:28:23 2012 (5010AB47)
fffff880`01d64000 fffff880`01d85000 dfsc dfsc.sys Wed Jan 15 23:42:58 2014 (52D71D02)
fffff880`01d85000 fffff880`01d91000 ndistapi ndistapi.sys Thu Sep 20 07:09:19 2012 (505AB30F)
fffff880`01d91000 fffff880`01dc0000 ndiswan ndiswan.sys Thu Jul 26 03:23:13 2012 (5010AA11)
fffff880`01dc0000 fffff880`01dde000 rassstp rassstp.sys Thu Jul 26 03:23:59 2012 (5010AA3F)
fffff880`01dde000 fffff880`01df6000 AgileVpn AgileVpn.sys Thu Jul 26 03:23:11 2012 (5010AA0F)
fffff880`01df6000 fffff880`01dfc400 CmBatt CmBatt.sys Thu Jul 26 03:29:20 2012 (5010AB80)
fffff880`01e00000 fffff880`01e54000 CLASSPNP CLASSPNP.SYS Sat Jun 29 04:07:45 2013 (51CE4F81)
fffff880`01e54000 fffff880`01e68000 crashdmp crashdmp.sys Fri Aug 30 04:11:28 2013 (52200D60)
fffff880`01e75000 fffff880`01e7e000 Null Null.SYS Thu Jul 26 03:30:16 2012 (5010ABB8)
fffff880`01e81000 fffff880`020ba000 tcpip tcpip.sys Wed Jan 22 04:28:22 2014 (52DF48E6)
fffff880`020ba000 fffff880`02122000 fwpkclnt fwpkclnt.sys Fri Mar 01 04:55:54 2013 (513034DA)
fffff880`02122000 fffff880`0213d000 wfplwfs wfplwfs.sys Thu Oct 10 04:32:19 2013 (52561FC3)
fffff880`0213d000 fffff880`02191000 volsnap volsnap.sys Sat Jun 01 04:10:22 2013 (51A9661E)
fffff880`02191000 fffff880`021a8000 mup mup.sys Thu Jul 26 03:30:00 2012 (5010ABA8)
fffff880`021a8000 fffff880`021b4000 npsvctrig npsvctrig.sys Thu Jul 26 03:27:33 2012 (5010AB15)
fffff880`021b4000 fffff880`021d0000 disk disk.sys Sat Oct 12 07:31:15 2013 (5258ECB3)
fffff880`021ed000 fffff880`021ff000 dfs dfs.sys Thu Jul 26 03:28:21 2012 (5010AB45)
fffff880`03800000 fffff880`03863000 mrxsmb mrxsmb.sys Tue Feb 05 22:29:08 2013 (511187B4)
fffff880`0389c000 fffff880`038eb000 ks ks.sys Sat Feb 02 07:25:50 2013 (510CBF7E)
fffff880`038eb000 fffff880`038f6000 rdpbus rdpbus.sys Thu Jul 26 03:28:19 2012 (5010AB43)
fffff880`038f6000 fffff880`0390a000 NDProxy NDProxy.SYS Tue Apr 09 03:33:41 2013 (51637E05)
fffff880`0390a000 fffff880`03915000 flpydisk flpydisk.sys Thu Jul 26 03:30:15 2012 (5010ABB7)
fffff880`03915000 fffff880`03922000 dump_diskdump dump_diskdump.sys Thu Jul 26 03:29:58 2012 (5010ABA6)
fffff880`03922000 fffff880`0393f000 dump_LSI_SAS dump_LSI_SAS.sys Fri May 11 20:40:21 2012 (4FAD6B25)
fffff880`0393f000 fffff880`03947000 HIDPARSE HIDPARSE.SYS Sat Jun 29 04:08:18 2013 (51CE4FA2)
fffff880`03947000 fffff880`03955000 monitor monitor.sys Fri Mar 01 04:56:18 2013 (513034F2)
fffff880`03955000 fffff880`0397d000 luafv luafv.sys Thu Jul 26 03:29:13 2012 (5010AB79)
fffff880`0397d000 fffff880`03991000 lltdio lltdio.sys Thu Jul 26 03:24:02 2012 (5010AA42)
fffff880`03991000 fffff880`039a9000 rspndr rspndr.sys Thu Jul 26 03:24:06 2012 (5010AA46)
fffff880`039a9000 fffff880`039c9000 bowser bowser.sys Thu Jul 26 03:28:01 2012 (5010AB31)
fffff880`039c9000 fffff880`039e0000 mpsdrv mpsdrv.sys Thu Oct 31 03:42:19 2013 (5271D19B)
fffff880`03c00000 fffff880`03c73000 rdbss rdbss.sys Sat May 04 05:47:00 2013 (518492C4)
fffff880`03c73000 fffff880`03c8d000 wanarp wanarp.sys Tue Apr 09 03:31:00 2013 (51637D64)
fffff880`03c8d000 fffff880`03c9b000 nsiproxy nsiproxy.sys Thu Jul 26 03:25:00 2012 (5010AA7C)
fffff880`03c9b000 fffff880`03ca3000 vmmouse vmmouse.sys Mon Jun 04 10:34:25 2012 (4FCC8121)
fffff880`03ca3000 fffff880`03e0c000 dxgkrnl dxgkrnl.sys Thu Sep 19 04:16:23 2013 (523A6C87)
fffff880`03e0c000 fffff880`03e1d000 watchdog watchdog.sys Thu Jul 26 03:29:05 2012 (5010AB71)
fffff880`03e1d000 fffff880`03e6b000 dxgmms1 dxgmms1.sys Wed Jan 09 03:58:58 2013 (50ECEB02)
fffff880`03e6b000 fffff880`03e7c000 BasicDisplay BasicDisplay.sys Thu Jul 26 03:29:08 2012 (5010AB74)
fffff880`03e7c000 fffff880`03e8e000 Npfs Npfs.SYS Thu Jul 26 03:30:26 2012 (5010ABC2)
fffff880`03e8e000 fffff880`03e9a000 Msfs Msfs.SYS Thu Jul 26 03:30:24 2012 (5010ABC0)
fffff880`03e9a000 fffff880`03ebc000 tdx tdx.sys Thu Jul 26 03:24:58 2012 (5010AA7A)
fffff880`03ebc000 fffff880`03eca000 TDI TDI.SYS Thu Jul 26 03:27:59 2012 (5010AB2F)
fffff880`03eca000 fffff880`03ed6000 ws2ifsl ws2ifsl.sys Thu Sep 20 07:09:50 2012 (505AB32E)
fffff880`03ed6000 fffff880`03f2e000 netbt netbt.sys Thu Jul 26 03:24:26 2012 (5010AA5A)
fffff880`03f2e000 fffff880`03fc4000 afd afd.sys Wed Sep 04 04:11:20 2013 (5226A4D8)
fffff880`03fc4000 fffff880`03fee000 pacer pacer.sys Thu Jul 26 03:23:05 2012 (5010AA09)
fffff880`03fee000 fffff880`03ffe000 netbios netbios.sys Thu Jul 26 03:28:19 2012 (5010AB43)
fffff880`03ffe000 fffff880`03fff480 swenum swenum.sys Thu Jul 26 03:28:53 2012 (5010AB65)
fffff880`0ac00000 fffff880`0acdf000 HTTP HTTP.sys Fri Mar 15 00:17:15 2013 (5142688B)
fffff880`0acdf000 fffff880`0ace7000 vmmemctl vmmemctl.sys Sun Dec 15 03:36:24 2013 (52AD23B8)
fffff880`0acf8000 fffff880`0ad43000 mrxsmb10 mrxsmb10.sys Thu Jul 26 03:23:06 2012 (5010AA0A)
fffff880`0ad43000 fffff880`0ad7e000 mrxsmb20 mrxsmb20.sys Tue Feb 05 22:28:36 2013 (51118794)
fffff880`0b200000 fffff880`0b20d000 condrv condrv.sys Thu Jul 26 03:30:08 2012 (5010ABB0)
fffff880`0b20d000 fffff880`0b2ae000 srv2 srv2.sys Tue Apr 09 03:33:02 2013 (51637DDE)
fffff880`0b2cd000 fffff880`0b399000 peauth peauth.sys Tue Apr 09 03:32:01 2013 (51637DA1)
fffff880`0b399000 fffff880`0b3a4000 secdrv secdrv.SYS Wed Sep 13 14:18:38 2006 (4508052E)
fffff880`0b3a4000 fffff880`0b3e8000 srvnet srvnet.sys Tue Apr 09 03:31:13 2013 (51637D71)
fffff880`0b3e8000 fffff880`0b3fa000 tcpipreg tcpipreg.sys Thu Jul 26 03:23:13 2012 (5010AA11)
fffff880`0b4e3000 fffff880`0b570000 srv srv.sys Thu Jul 26 03:25:28 2012 (5010AA98)
fffff880`0b570000 fffff880`0b57b000 rdpvideominiport rdpvideominiport.sys Fri Oct 12 06:48:28 2012 (5077AF2C)
fffff880`0b57b000 fffff880`0b5ac000 rdpdr rdpdr.sys Thu Jul 26 03:25:18 2012 (5010AA8E)
fffff880`0b5ac000 fffff880`0b5b9000 terminpt terminpt.sys Thu Jul 26 03:28:53 2012 (5010AB65)
fffff960`00118000 fffff960`00508000 win32k win32k.sys Sat Feb 08 04:34:05 2014 (52F5B3BD)
fffff960`006cb000 fffff960`006d4000 TSDDD TSDDD.dll Thu Jul 26 03:30:25 2012 (5010ABC1)
fffff960`00879000 fffff960`008af000 cdd cdd.dll Thu Jul 26 05:49:37 2012 (5010CC61)
fffff960`00a21000 fffff960`00a60000 RDPUDD RDPUDD.dll Fri Oct 12 06:50:01 2012 (5077AF89)
Unloaded modules:
fffff880`01e68000 fffff880`01e75000 dump_storport.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0000D000
fffff880`021d0000 fffff880`021ed000 dump_LSI_SAS.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0001D000
fffff880`021a8000 fffff880`021b4000 hwpolicy.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0000C000
fffff880`00f41000 fffff880`00f5c000 sacdrv.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0001B000
fffff880`00c33000 fffff880`00c40000 ApiSetSchema.dll
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0000D000
I have searched for others having a similar problem but have not managed to find much.
The memory dump at the time of the crash does seem to hint at a problem with DFSR.exe.
The setup seems to be running fine again now and is going through its consistency checks, it is just a major inconvenience and will only get worse as the DFS becomes busier and approaches capacity.
The plan was to put this setup into production however with the unpredictability of blue screen reboots I cannot see this happening until I can find a fix or work around.
I have yet to see this problem occur on the other (physical) server, this is pretty much identical in configuration apart from its storage access.
My thoughts are a possible bug in the DFSR component or a bug in the DSM Drivers used for the iSCSI SAN connection or maybe a combination of the two.
Any help, thoughts or suggestions greatly appreciated
Thanks
Hi,
Please install the current version of Dfssvc.exe Dfsc.sys Dfsrs.exe for Windows Server 2012.
List of currently available hotfixes for Distributed File System (DFS) technologies in Windows Server 2012 and Windows Server 2012 R2
http://support.microsoft.com/kb/2951262
The issue may be due to the DFSRoot folder has lost NTFS permission. Some reasons why DFS root lose ACLs Links are listed in the article below:
How to implement Windows Server 2003 Access-based Enumeration in a DFS environment
http://support.microsoft.com/kb/907458/en-us
You could use dfsutil to set NTFS permission: dfsutil property ACL \\DFS-namespace
Using the Windows Server 2008 DFSUTIL.EXE command line to manage DFS-Namespaces
http://blogs.technet.com/b/josebda/archive/2009/05/01/using-the-windows-server-2008-dfsutil-exe-command-line-to-manage-dfs-namespaces.aspx
To narrow down the issue, you could remove the DFS role to check if the issue related to the dfs namespace and dfs replication roles.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
In-place Upgrade Server 2012 to R2 running DFS-N and DFS-R roles
Hello,
I have 2 servers running DFS-R and DFS-N running Windows Server 2012. I am planning to do an in-place upgrade to 2012 R2. Is this supported?
Rgds,
Irfan
Irfan Goolab SALES ENGINEER (Microsoft UC) MCP, MCSA, MCTS, MCITP, MCTHi Irfan,
Yes, you can upgrade Windows Server 2012 to 2012 R2 to deploy a later version of DFSR. DFSR must be recreated for that server and perhaps for the entire Replication Group depending on the server’s place in data origination.
For more detailed information, please refer to the articles below:
Replacing DFSR Member Hardware or OS (Part 5: Reinstall and Upgrade)
http://blogs.technet.com/b/askds/archive/2010/09/10/replacing-dfsr-member-hardware-or-os-part-5-reinstall-and-upgrade.aspx
Upgrade Options for Windows Server 2012 R2
http://technet.microsoft.com/en-us/library/dn303416.aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Hi All,
Is it possible to create a two node cluster with SQL server 2012 STD on node1 and SQL Server 2008 ENT on node2 on a Windows server 2012?
aaI think you are confused with the way cluster is installed. Installing SQL on cluster is a two step process. On first node you create a new SQL cluster and on second node you need "AddNode" action.
Same edition media has to be used in above two operation.
you can install two separate instances with one enterprise and one standard.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle -
I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?
Hello AKCamus
To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
SQL Server 2012 DB Engine does not start (clean install with server 2012 and 2008 R2)
I'm trying to do clean installation of SQL server 2012 on Server 2012 (which is runnning as a VM on ESX server) and getting this "wait on the DB engine recovery failed" message. Initially, I though this issue was related to some permission issues
but changing the permission or service accounts didn't help. I'm not seeing any "denied" messages in the log files either. Even with Server 2008 R2 (clean built VM), the installation gives the exactly the same error messages.
My setup is purely for test purpose; so, the security is not a concern. Can someone help or give me a clue where to look?
(Summary)
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-28 17:12:12
End time: 2014-05-28 17:19:47
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: WIN-1V3VKPV5Q19
Machine processor count: 1
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: E:\x64\setup\
Installation edition: Evaluation
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x64
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x64
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$TESTDB
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: TESTDB
INSTANCENAME: TESTDB
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$TESTDB
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: WIN-1V3VKPV5Q19\Administrator
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\SystemConfigurationCheck_Report.htm
(Error Log)
2014-05-28 17:17:26.64 spid8s 0 transactions rolled back in database 'msdb' (4:0). This is an informational message only. No user action is required.
2014-05-28 17:17:26.73 spid9s Starting up database 'model'.
2014-05-28 17:17:28.24 spid9s Error: 9004, Severity: 23, State: 6.
2014-05-28 17:17:28.24 spid9s An error occurred while processing the log for database 'model'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
2014-05-28 17:17:28.24 spid9s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
(Details)
(01) 2014-05-28 17:17:28 Slp: Exception type: Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException
(01) 2014-05-28 17:17:28 Slp: Message:
(01) 2014-05-28 17:17:28 Slp: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
(01) 2014-05-28 17:17:28 Slp: HResult : 0x851a001a
(01) 2014-05-28 17:17:28 Slp: FacilityCode : 1306 (51a)
(01) 2014-05-28 17:17:28 Slp: ErrorCode : 26 (001a)
(01) 2014-05-28 17:17:28 Slp: Data:
(01) 2014-05-28 17:17:28 Slp: SQL.Setup.FailureCategory = ConfigurationFailure
(01) 2014-05-28 17:17:28 Slp: WatsonConfigActionData = INSTALL@CONFIGRC@SQL_ENGINE_CORE_INST
(01) 2014-05-28 17:17:28 Slp: WatsonExceptionFeatureIdsActionData = System.String[]
(01) 2014-05-28 17:17:28 Slp: Stack:
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart(Process processSql)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceSCM.StartSqlServer(String[] parameters)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig.ConfigSQLServerSystemDatabases(EffectiveProperties properties, Boolean isConfiguringTemplateDBs, Boolean useInstallInputs)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig.DoCommonDBStartConfig(ConfigActionTiming timing)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.ExecuteAction(String actionId)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.Execute(String actionId, TextWriter errorStream)
(01) 2014-05-28 17:17:28 Slp: Watson Bucket 1
Original Parameter Values
(01) 2014-05-28 17:17:28 Slp: Parameter 0 : SQL Server 2012@RTM@
(01) 2014-05-28 17:17:28 Slp: Parameter 1 : Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart
(01) 2014-05-28 17:17:28 Slp: Parameter 2 : Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart
(01) 2014-05-28 17:17:28 Slp: Parameter 3 : Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 4 : Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
(01) 2014-05-28 17:17:28 Slp: Parameter 6 : INSTALL@CONFIGRC@SQL_ENGINE_CORE_INST
(01) 2014-05-28 17:17:28 Slp:
Final Parameter Values
(01) 2014-05-28 17:17:28 Slp: Parameter 0 : SQL Server 2012@RTM@
(01) 2014-05-28 17:17:28 Slp: Parameter 1 : 0xD15B4EB2
(01) 2014-05-28 17:17:28 Slp: Parameter 2 : 0xD15B4EB2
(01) 2014-05-28 17:17:28 Slp: Parameter 3 : 0x4BDAF9BA@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 4 : 0x4BDAF9BA@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
(01) 2014-05-28 17:17:28 Slp: Parameter 6 : 0x9C5770A6Hi Nababoya:
As you are telling this is a test installation process...
In the logs i m seeing the error message "An error occurred while processing the log for database 'model'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.".
1) If the SQL Services was installed successfully and SQL Service was not able to start because of model database issue...
1.1) If you have model database SQL back file, start the SQL Server in single user mode with minimum configuration and try to restore MODEL database
http://blogs.msdn.com/b/sqlserverfaq/archive/2011/05/11/inf-hey-my-sql-server-service-is-not-starting-what-do-i-do.aspx
1.2) If you don't have backups., try to rebuild the system databases but make sure that you are not losing any data critical data on master and SQL Jobs on MSDB
http://msdn.microsoft.com/en-us/library/dd207003%28v=sql.110%29.aspx#RebuildProcedure
2) As if this is a new installation try to repair the instance with the help of setup media file
3) If the repair option fails., the last option wipe out the complete SQL Server components from Services.msc and Registries and start new installation.
4) Make sure when you are doing un-installation all the required SQL Server components on services.msc should be in stop state.
Hope this helps and let me know any questions...
Thanks,
Thanks, Satish Kumar. Please mark as this post as answered if my anser helps you to resolves your issue :) -
System: Dell PowerEdge sc1420 with dual xeon and Adaptec 2420SA SATA RAID (supported by OS); 10 GB memory (2x4, rank 2, organization x4, in DIMM1 & DIMM2; 2x1, registered, organization x8, in DIMM3 & DIMM4)
This computer is currently running Windows Server 2008 R2 Enterprise which was installed with no problems.
Objective: clean install of Windows Server 2012 R2 Standard on an otherwise unused RAID array disk set.
All attempts to boot from DVD result in loading of files (grey progress bar on bottom of screen), brief dark screen, then black screen with a blue windows logo for about 2 seconds and then a flash of about 10 lines of error notifications on a black screen
for about 1/4 second (unreadable), and then a reboot of the computer.
Coreinfo.exe confirms that cpus DO support NX and PAE; do NOT support VMX (virtual machine enhancements).
Attempts to run memtest.exe from boot disk tool-menu startup result in an error message that the memtest.exe file is corrupt.
Running memtest.exe from Windows 2008 R2 install disk results in all memory tests passed!
Attempted booting with multiple DVD's (some +R, some -R, all verified) burned from .iso. These DVD's were used successfully to install Windows Server 2012 R2 on an HP Pavilion. Also changed DVD drives just to rule out DVD hardware.
Running CHKDSK from Windows 2012 R2 on HP Pavilion shows no problems; running CHKDSK from Windows 2008 R2 on the Dell system on the same disks shows some problems. Running checkdisk on the Windows 2008 R2 install disk from the Windows 2008 R2 installed
system shows no problems. All disks burned and verified on same system.
Also attempted to boot from USB thumbdrive with copy of DVD on it. Same results: system loads files then reboots at first Windows logo. So that would rule out disk quality issues per se??
Started to try an upgrade rather clean install to see if any errors were announced. None were announced as the system went through much of the process. I aborted somewhere along the way before committing to the upgrade because 1) the most likely
outcome was it would not boot after install (I don't really need the practice in restoring); and 2) even if it did reboot, having a system that can't be repaired by booting the install disk is pointless.
All disks and raid arrays are recognized and usable by RAID controller card and by Windows Server 2008 R2. Disks are within spec for use with Adaptec 2420SA (1TB @ 300).
Is VMX (aka VT-x) actaully required for ANY install even though Hyper-V is not intended to be used? If so, it is too bad that the Microsoft system requirements (
http://technet.microsoft.com/en-us/library/dn303418.aspx ) don't make that clear. And lack of VMX support really doesn't explain the memtest.exe "corruption" issue.
Or is it maybe something unique about the files on 2012 R2 disk (or disk image on USB) that are causing some problem with the chipset processing? But why?
My vote would be for the latter of the issues, but I have no clue why or if it is remediable. Suggestions?So here is what I think is the final understanding of this problem:
First, one additional piece of important information: The computer successfully moves into and through the Windows Boot Loader phase and succeeding phase ONLY for Windows 8.1 32-bit, but NOT for Windows 8.1 64-bit nor for Windows
Server 2012 R2 (only 64-bit).
The Windows Boot Manager phase (which precedes the Windows Boot Loader phase) is either 32-bit or 64-bit (64 –bit for this case) and is loaded by the 16-bit stub program (Bootmgr) which starts in real mode.
Windows Boot Loader of course runs in either 32-bit or 64-bit (64 –bit for this case) according to the product being installed.
By inference, the essential problem is occurring in conjunction with the loading of a WIM file to start the Windows Boot Manager.
The boot manager starts ok and generally shows its essential screens (Windows Boot Manager; Advanced Boot Options) or proceeds to load files for transition into Windows startup in the succeeding Windows Boot Loader phase (that doesn’t “boot” but rather
loads the system). This is best confirmed by the announced corruption of the memtest.exe file when selecting Windows Memory Diagnostic from the Windows Boot Manager Screen.
If allowed to continue loading files to pass control to the Windows Boot Manager, the type of abort and resulting immediate restart that occurs is that which you would associate with unhandled cpu exceptions (invalid instruction, memory out of range,
wild interrupt, etc.) that most of us have not commonly seen for 20 years (since beginning to use well behave OS’s from Windows NT 3.1 and on).
So, the problem obviously is due to a failure to properly mount the WIM file and/or properly access it (probably the latter) when running in 64-bit protected mode.
This is independent of the hardware on which the install disk is actually mounted (DVD or USB-flash), so it is NOT a hardware problem
per se.
Since the WIM is mounted early in the process, Boot Manager may well have loaded it using BIOS routines to access the physical device on which it resides rather than loading 32-bit or 64-bit drivers of its own.
Hence, if the BIOS does not “mount” the WIM in a way that is later fully compatible with access from the 64-bit systems being loaded, it could cause apparent file corruption.
If it is only partially incompatible some functionality may appear quite usable (like loading files) until later detected.
This is vague on my part, because the exact nature of the incompatibility cannot be readily determined from the information available.
But the consequence is the same: the system cannot boot from the install disk, either for initial installation or repairs.
Incidental conclusion: The 64-bit boot manager code for Windows Server 2008 does not exhibit this faulty behavior, but the 64-bit code for Windows Server 2012 does.
So the problem is not inherent with loading 64-bit server OS’s.
Expectations: If the system were to be upgraded using the features of the install disk while running an installed OS, say Windows Server 2008 R2, it might well succeed and yield a fully functional system upgraded to Windows Server 2012
R2 (because the installed operating system is started from discrete files, not from a WIM file).
However, in order to perform a disaster recovery using Windows resources (such as image backups from Windows Server Backup), one would have to presumably boot from a Windows Server 2012 64-bit install disk or Windows Server USB recovery drive.
Of course we know that the Windows Server install disk will not boot and we can be fairly sure that the problem will migrate to any Windows Server USB recovery drive that is created.
My inspection of a Windows 7 System Repair CD shows that is based exclusively on boot.wim, not discrete files!
Of course a generated image for a WIM for Windows 2012 USB recovery drive
might not have the flaw that drives this behavior, but it probably would.
Problem conclusion: A BIOS upgrade would be required for compatibility with Windows Server 2014 clean installation
and any maintenance; and none is available from the OEM.
Problem not resolved, but understood for future reference.
Thanks to Tim whose comments helped me focus my thinking. -
Windows Server 2012 - Direct Access clients and the Windows 8 firewall
Hi,
We're running a simple proof-of-concept for Server 2012 Direct Access, we have a single DA server behind a firewall using NAT. We have a number of client devices setup for DA and running Windows 8.
Our issue is that we can only get the Windows 8 direct access clients to connect (when outside the corporate network) and work with the windows firewall disabled (public network profile).
With the windows firewall disabled everything works exactly as expected. When outside the corporate network the client detects the network state (public network profile), connects via DA and all internal resources can be accessed successfully...fantastic.
Is there some specific guidance on manually configuring the windows 8 firewall for Direct Access ? We've tried the obvious TCP:443 with edge traversal enabled but without success.
Much of the information we have found relates to UAG rather than Windows 2012 DA.
Any assistance is appreciated.Hi,
There isn’t any specific configuration on the firewall.
Just confirm that port 443 can be forwarded to DirectAccess server.
Of course, make sure you are using IPsec first.
Check the links:
STEP 6: Test DirectAccess Client Connectivity from Behind a NAT Device
http://technet.microsoft.com/en-us/library/hh831524.aspx#TeredoCLIENT1
DirectAccess for Windows Server 2012 Installation & Configuration Guide
http://syscomlab.blog.com/2012/09/directaccess-for-windows-server-2012-guide/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Unable to install Windows Server 2012 Feature - [Tools] File Server Resource Manager Tools.
Installs, however when I restart the server error messages appears saying feature unable to install, windows reverting changes.
In the Setup event logs have the following information message "Update FSRM-Infrastructure of package FSRM-All failed to be turned on. Status: 0x800f0922"
Does anyone have any idea's on why this Feature can not be installed ??
ScottHi Shaun
Tried both of your suggestions, however neither strategy worked.
Strategy 1
Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"
Feature un-installed itself during the restart.
Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services". However
this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
PACKAGE SERVICING COMMANDS:
/Add-Package - Adds packages to the image.
/Remove-Package - Removes packages from the image.
/Enable-Feature - Enables a specific feature in the image.
/Disable-Feature - Disables a specific feature in the image.
/Get-Packages - Displays information about all packages in the image.
/Get-PackageInfo - Displays information about a specific package.
/Get-Features - Displays information about all features in a package.
/Get-FeatureInfo - Displays information about a specific feature.
/Cleanup-Image - Performs cleanup and recovery operations on the image.
Strategy 2
Tried installing via powershell, using the following command DISM
/online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
All up back to where I started? -
WIndows Server 2012 w/ Hyper V and Windows 7
I have been able to create every imaginable virtualization in a test environment except for Windows 7. It asks for drivers. I have a driver CD but when I put the CD in the D: drive. It will run but suddenly the command line screen states that a file on
the F: drive does not exist. Where is this F: drive coming from?I might have misstated my situation. I have Windows Server 2012 outfitted with Hyper-V. I'm trying to virtualize a Windows 7 operating system.
I found a another W7 media disk that seems to bypass this problem. -
WSUS issue on server 2012 - Failing to update and have to set WinHTTP set
Very new to 2012 with little knowledge on the product
We have been seeing an issue for a while where we need to set the WinHTTP proxy in order for servers to correctly check in for WSUS and download patches. This has been set in the Windows 2008 R2 build so hasn't been an issue before. e.g.
However with Windows Server 2012 R2, setting the WinHTTP proxy causes some issues. With Exchange 2013 the PowerShell console does not connect with this set so we need a way around this.
It seems as if the we use the FQDN in the GPO it then tries to go out to the internet thinking that the FQDN is an internet address and then blocked by the proxy so hence we had to create the proxy set on the server. We don't want to have to set WinHTTP
on every 2012 servers as this would be very time consuming and will become un-manageable. Any help is greatly appreciated.Hello,
What is the version of your WSUS? I suppose windows server 2012 is newly added in your network and the WSUS server is not patched.
An update for Windows Server Update Services 3.0 Service Pack 2 is available (KB2734608)
http://support.microsoft.com/kb/2734608
Hope this helps. -
Windows Server 2012 R2 NIC Teaming and DHCP Issue
Came across a weird issue today during a server deployment. I was doing a physical server deployment and got Windows installed and was getting ready to connect it to our network. Before connecting the Ethernet cables to the network adapters, I created a
NIC Team using Windows Server 2012 R2 built-in software with a static IP address (we'll say its 192.168.1.56). Once I plugged in the Ethernet cables, I got network access but was unable to join our domain. At this time, I deleted the NIC team and the two network
adapters got their own IP addresses issued from DHCP (192.168.1.57 and 192.168.1.58) and at this point I was able to join our domain. I recreated the NIC team and set a new static IP (192.168.1.57) and everything was working great as intended.
My issue is when I went into DHCP I noticed a random entry that was using the IP address I used for the first NIC teaming attempt (192.168.1.56), before I joined it to the domain. I call this a random entry because it is using the last 8 characters of the
MAC address as the hostname instead of the servers hostname.
It seems when I deleted the first NIC team I created (192.168.1.56), a random MAC address Server 2012 R2 generated for the team has remained embedded in the system. The IP address is still pingable even though an ipconfig /all shows the current NIC team
with the IP 192.168.1.57. There is no IP address of 192.168.1.56 configured on the current server and I have static IPs set yet it is still pingable and registering with DHCP.
I know this is slightly confusing but I am hoping someone else has encountered this issue and may be able to tell me how to fix this. Simply deleting the DHCP entry does not do the trick, it comes back.Hi,
Please confirm you have choose the right NIC team type, If you’ve previously configured NIC teaming, you’re aware NIC teams usually require the assistance of network-side
protocols. Prior to Windows 2012, using a NIC team on a server also meant enabling protocols like EtherChannel or LACP (also known as 802.1ax or 802.3ad) on network ports.
More information:
NIC teaming configure in Server 2012
http://technet.microsoft.com/en-us/magazine/jj149029.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Windows server 2012 as primary DC and DNS server and windows server 2003 as secondary DC and DNS
Migration from windows server 2003 AD DC and DNS server to windows server 2012 R2,
Cannot I set up Windows server 2012 R2 as primary DC and DNS , windows server 2003 as secondary DC and DNS ? (for backup server when server 2012 fail, user can continue to login and access internet services)You can mix both as long as your Forest and Domain Functional level are Windows Server 2003. However, I would like to bring your attention to this blog about known problems when mixing DCs with Windows Server 2003 and 2012 R2 OS:
http://blogs.technet.com/b/askds/archive/2014/07/23/it-turns-out-that-weird-things-can-happen-when-you-mix-windows-server-2003-and-windows-server-2012-r2-domain-controllers.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
SQL Server 2012 Express bulk Insert flat file 1million rows with "" as delimeter
Hi,
I wanted to see if anyone can help me out. I am on SQL server 2012 express. I cannot use OPENROWSET because my system is x64 and my Microsoft office suit is x32 (Microsoft.Jet.OLEDB.4.0).
So I used Import wizard and is not working either.
The only thing that let me import this large file, is:
CREATE TABLE #LOADLARGEFLATFILE
Column1
varchar(100), Column2 varchar(100), Column3 varchar(100),
Column4 nvarchar(max)
BULK INSERT
#LOADLARGEFLATFILE
FROM 'C:\FolderBigFile\LARGEFLATFILE.txt'
WITH
FIRSTROW = 2,
FIELDTERMINATOR ='\t',
ROWTERMINATOR ='\n'
The problem with CREATE TABLE and BULK INSERT is that my flat file comes with text qualifiers - "". Is there a way to prevent the quotes "" from loading in the bulk insert? Below is the data.
Column1
Column2
Column3
Column4
"Socket Adapter"
8456AB
$4.25
"Item - Square Drive Socket Adapter | For "
"Butt Splice"
9586CB
$14.51
"Item - Butt Splice"
"Bleach"
6589TE
$27.30
"Item - Bleach | Size - 96 oz. | Container Type"
Ed,
Edwin LoperaHi lgnusLumen,
According to your description, you use BULK INSERT to import data from a data file to the SQL table. However, to be usable as a data file for bulk import, a CSV file must comply with the following restrictions:
1. Data fields never contain the field terminator.
2. Either none or all of the values in a data field are enclosed in quotation marks ("").
In your data file, the quotes aren't consistent, if you want to prevent the quotes "" from loading in the bulk insert, I recommend you use SQL Server Import and Export Wizard tools in SQL Server Express version. area, it will allow to strip the
double quote from columns, you can review the following screenshot.
In other SQL Server version, we can use SQL Server Integration Services (SSIS) to import data from a flat file (.csv) with removing the double quotes. For more information, you can review the following article.
http://www.mssqltips.com/sqlservertip/1316/strip-double-quotes-from-an-import-file-in-integration-services-ssis/
In addition, you can create a function to convert a CSV to a usable format for Bulk Insert. It will replace all field-delimiting commas with a new delimiter. You can then use the new field delimiter instead of a comma. For more information, see:
http://stackoverflow.com/questions/782353/sql-server-bulk-insert-of-csv-file-with-inconsistent-quotes
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
Hyper-V BSOD Windows Server 2012 R2 vhdmp.sys
On a Hyper-V server (ProLiant DL380p Gen8) that has been running for 8 months, I have suddenly had two BSOD's out of the blue ;-)
19 Dec 02:06
29 Dec 21:07
Here is the latest dump.. the only slightly different thing that has happened recently is that there is now a Windows 7 VM of SpiceWorks running as a VM
Any ideas?
MODULE_NAME: vhdmp
FAULTING_MODULE: fffff801dce0a000 nt
DEBUG_FLR_IMAGE_TIMESTAMP: 52e848da
EXCEPTION_RECORD: ffffd000255353b8 -- (.exr 0xffffd000255353b8)
ExceptionAddress: fffff80044eae154 (vhdmp+0x0000000000009154)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff
CONTEXT: ffffd00025534bc0 -- (.cxr 0xffffd00025534bc0;r)
rax=00000000726f6673 rbx=ffffe8002eb6e080 rcx=ffffe800258ed4b0
rdx=ffffe800258ed4b0 rsi=ffffe8002eb6d000 rdi=ffffe800258ed4b0
rip=fffff80044eae154 rsp=ffffd000255355f0 rbp=ffffd00025535670
r8=510000000000082f r9=000000000000002f r10=fffff801dd5995b0
r11=0000000000000000 r12=0000000000000000 r13=0000000000000001
r14=ffffe8002615d040 r15=ffffe80025980750
iopl=0 nv up ei pl nz na pe nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010202
vhdmp+0x9154:
fffff800`44eae154 ff5338 call qword ptr [rbx+38h] ds:002b:ffffe800`2eb6e0b8=????????????????
Last set context:
rax=00000000726f6673 rbx=ffffe8002eb6e080 rcx=ffffe800258ed4b0
rdx=ffffe800258ed4b0 rsi=ffffe8002eb6d000 rdi=ffffe800258ed4b0
rip=fffff80044eae154 rsp=ffffd000255355f0 rbp=ffffd00025535670
r8=510000000000082f r9=000000000000002f r10=fffff801dd5995b0
r11=0000000000000000 r12=0000000000000000 r13=0000000000000001
r14=ffffe8002615d040 r15=ffffe80025980750
iopl=0 nv up ei pl nz na pe nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010202
vhdmp+0x9154:
fffff800`44eae154 ff5338 call qword ptr [rbx+38h] ds:002b:ffffe800`2eb6e0b8=????????????????
Resetting default scope
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x24
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
LAST_CONTROL_TRANSFER: from fffff80044ed7d98 to fffff80044eae154
STACK_TEXT:
ffffd000`255355f0 fffff800`44ed7d98 : ffffd000`25535660 ffffe800`2eb6d000 00000000`00000010 ffffc001`206c644d : vhdmp+0x9154
ffffd000`25535620 fffff801`dcea9378 : ffffe800`26bc7730 ffffe800`26bc7700 ffffe800`26bc79fb ffffc001`6bbe0010 : vhdmp+0x32d98
ffffd000`25535690 fffff800`43422130 : ffffe800`2ef1b000 00000000`00000001 ffffe800`2ef1b018 ffffe800`26bc7730 : nt!IofCompleteRequest+0x594
ffffd000`255357a0 fffff800`4341ea58 : 00000000`00000000 ffffd000`25535a40 ffffc001`734fd140 00000000`00000048 : Ntfs+0x1b130
ffffd000`255357d0 fffff800`4340ea89 : ffffe800`2ef1b018 ffffd000`25535a40 00000000`00000000 ffffe800`2ef1b018 : Ntfs+0x17a58
ffffd000`25535a00 fffff801`dce5dadb : fffff800`430cb100 fffff800`4340e860 ffffe800`2ef1b018 ffffe800`28e2f540 : Ntfs+0x7a89
ffffd000`25535b50 fffff801`dced9794 : 00000000`00000000 ffffe800`28e2f540 ffffe800`28e2f540 ffffe000`5de2a380 : nt!RtlSidHashLookup+0x228f
ffffd000`25535c00 fffff801`dcf645c6 : ffffd001`64a80180 ffffe800`28e2f540 ffffd001`64a8c7c0 00000000`00000000 : nt!KeAcquireSpinLockRaiseToDpc+0x1a4
ffffd000`25535c60 00000000`00000000 : ffffd000`25536000 ffffd000`25530000 00000000`00000000 00000000`00000000 : nt!KeSynchronizeExecution+0x59d6
FOLLOWUP_IP:
vhdmp+9154
fffff800`44eae154 ff5338 call qword ptr [rbx+38h]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: vhdmp+9154
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: vhdmp.sys
STACK_COMMAND: .cxr 0xffffd00025534bc0 ; kb
BUCKET_ID: WRONG_SYMBOLS
FAILURE_BUCKET_ID: WRONG_SYMBOLS
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:wrong_symbols
FAILURE_ID_HASH: {70b057e8-2462-896f-28e7-ac72d4d365f8}
Followup: MachineOwnerHi NikNak8,
Regarding to bug check 0x24 , please refer to
the link below:
http://msdn.microsoft.com/en-us/library/windows/hardware/ff557433(v=vs.85).aspx
Please try to logon server with safemode to check if the issue persists .
By the way, it is not effective for us to debug
the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.To
obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Best Regards
Elton
Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
Query to Find what SQL Server services running, what status and with what service account
I need to check what SQL Server services are running(engine,agent,IS,AS,RS,browser and Full text) and what is the present status and what service accounts are been used by them on several servers in a single shot.
Could any one help me in finding a good script for the same.I have been looking for the same thing, the issue I am running into is finding the Actual Service Name. I know this question is old, and I personally do not understand the reply.
so Far I have the following:
DECLARE @ServiceAcount NVARCHAR(128);
SET @Service = 'No Return Value'
--MsDtsServer100 (SSIS)
EXEC master.dbo.xp_regread
'HKEY_LOCAL_MACHINE',
'SYSTEM\CurrentControlSet\services\MsDtsServer100',
'ObjectName',
@ServiceAccount OUTPUT;
SELECT @ServiceAccount;
I am still looking for the correct service naming for Analysis Services, Distributed Replaay Client, Distributed Replay Controller
Maybe you are looking for
-
Remote Disc Can't recognize Blank disc, but it does recognize other discs. I am trying to burn something from my itunes on my mac mini to a blank disc on my windows computer. What could be wrong? I can see other discs such as music and stuff so I kno
-
Oracle's comprehensive guidelines for setting up a development environment
i have a Sun Blade with Solaris/Oracle 8.1.7 installed on it. an application software is also housed on this box and uses the Oracle instance. i would additionally like to do 3-tier development on this Oracle instance. i have never done database admi
-
dear all i had instaled PSCA with tools 8.49, when i tying to start the StartAgent i am getting an error message like INFO main org.apache.commons.httpclient.HttpMethodBase - Recoverable exception c aught when processing request WARN main org.apache.
-
I would like to know if j2me 2.0 version works on this platform thanks Marios
-
Applying CT template to uploaded documents
I have a document library with multiple content types. Each CT has a custom document template with logos, doc properties, text, etc. If I create a New Document from the Ribbon, the document gets the CT metadata AND the document template. If I upload