BSOD when start transfering data

Hello.
Im install latest itunes at my new computer with win xp sp3 and when i connect my ipod and try to send some new music\cinema i got blue screen of death.
Error name - IRQLNOT_LESS_OREQUAL.
When im just connect my ipod all work. When i start transfering - BSOD
I try to connect with other usb, its doesnt help.
Any idea?
Motherboard - asus striker 2 formula. Maybe its connected with this problem somehow..

So..
nvgts.sys adress ba5e818b base at --- bum! restart -- .
I try to write other part tommorow. sleep time for my country
When windows is launch back, i got 15 ( omg, 15!! at 10 i think it will never end ) messages about critical error..
Ah! And about bios of my motherboard. I speak with other people, owners of this mb, no one get this error. I install latest version of bios, it doenst help.
Message was edited by: AraxniD

Similar Messages

'Error 8 occurred when starting the data extraction program'

Hello Experts,
I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
But when I check the extractor through RSA3, it looks fine.
Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
Thanks
Regards,
KP

Hi,
Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
rgds,
Edited by: Krishna Rao on May 6, 2009 3:22 PM

BSOD when starting MSMQ service as domain user Windows server 2012

Hi
We have a problem with a server getting BSOD when we start a service related to MSMQ. We get the attempted execute of noexecute memory BSOD whenever we start the service as a User on the domain. When we start the service as a system local it starts without
problem. I got the crashdump here:
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\170\120314-11828-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Product: Server, suite: TerminalServer SingleUserTS
Built by: 9200.16912.amd64fre.win8_gdr.140502-1507
Machine Name:
Kernel base = 0xfffff800`48476000 PsLoadedModuleList = 0xfffff800`48742aa0
Debug session time: Wed Dec 3 14:41:01.892 2014 (UTC + 1:00)
System Uptime: 0 days 0:04:09.904
Loading Kernel Symbols
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck FC, {7f982e340e0, 791000010fdb1025, fffff8800485a5e0, 80000005}
Probably caused by : mqac.sys ( mqac!ACCreateQueue+a77 )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis *
ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
An attempt was made to execute non-executable memory. The guilty driver
is on the stack trace (and is typically the current instruction pointer).
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
Arguments:
Arg1: 000007f982e340e0, Virtual address for the attempted execute.
Arg2: 791000010fdb1025, PTE contents.
Arg3: fffff8800485a5e0, (reserved)
Arg4: 0000000080000005, (reserved)
Debugging Details:
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT_SERVER
BUGCHECK_STR: 0xFC
PROCESS_NAME: mqsvc.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
TRAP_FRAME: fffff8800485a5e0 -- (.trap 0xfffff8800485a5e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000007f982e0c950 rbx=0000000000000000 rcx=0000005dff1fecd0
rdx=0000005dff34e988 rsi=0000000000000000 rdi=0000000000000000
rip=000007f982e340e0 rsp=fffff8800485a778 rbp=fffff8800485ab80
r8=fffffa800e623980 r9=0000000000000521 r10=fffffa800ec547a0
r11=0000000000000006 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe nc
000007f9`82e340e0 ?? ???
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80048661ef1 to fffff800484d0540
STACK_TEXT:
fffff880`0485a408 fffff800`48661ef1 : 00000000`000000fc 000007f9`82e340e0 79100001`0fdb1025 fffff880`0485a5e0 : nt!KeBugCheckEx
fffff880`0485a410 fffff800`48588980 : fffff880`0485a5e0 ffffd8e9`9e6056e2 fffffa80`0ec547a0 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x33f2d
fffff880`0485a450 fffff800`4850aabd : fffff880`0485a500 00000000`c0000016 fffffa80`0e603b00 fffffa80`0e623980 : nt! ?? ::FNODOBFM::`string'+0x33e85
fffff880`0485a4a0 fffff800`484cdfee : 00000000`00000008 00000000`00000000 00000000`00000000 fffff880`0485a5e0 : nt!MmAccessFault+0x3ed
fffff880`0485a5e0 000007f9`82e340e0 : fffff880`00dc5297 fffffa80`0ec54770 00000000`00000000 fffff8a0`011ce7c0 : nt!KiPageFault+0x16e
fffff880`0485a778 fffff880`00dc5297 : fffffa80`0ec54770 00000000`00000000 fffff8a0`011ce7c0 fffff980`00000000 : 0x000007f9`82e340e0
fffff880`0485a780 fffff880`00dc60d7 : 00000000`00000000 0000005d`ff34e988 00000000`00000000 00000000`00000000 : mqac!ACCreateQueue+0xa77
fffff880`0485a7f0 fffff800`488ab127 : fffffa80`0e5ed520 fffffa80`0d50ecf0 00000000`00000521 00000000`00000000 : mqac!ACDeviceControl+0x62b
fffff880`0485a890 fffff800`488c02f6 : 00000000`00000000 fffff8a0`00000080 00000000`00000000 00000000`00000000 : nt!IopXxxControlFile+0x7e5
fffff880`0485aa20 fffff800`484cf553 : 00000000`00000000 00000000`0000000c fffff6fb`7dbed078 fffff6fb`7da0ff30 : nt!NtDeviceIoControlFile+0x56
fffff880`0485aa90 000007f9`8a702c1a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
0000005d`ff34e928 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x000007f9`8a702c1a
STACK_COMMAND: kb
FOLLOWUP_IP:
mqac!ACCreateQueue+a77
fffff880`00dc5297 85c0 test eax,eax
SYMBOL_STACK_INDEX: 6
SYMBOL_NAME: mqac!ACCreateQueue+a77
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: mqac
IMAGE_NAME: mqac.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 5010abc2
IMAGE_VERSION: 6.2.9200.16384
BUCKET_ID_FUNC_OFFSET: a77
FAILURE_BUCKET_ID: 0xFC_mqac!ACCreateQueue
BUCKET_ID: 0xFC_mqac!ACCreateQueue
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0xfc_mqac!accreatequeue
FAILURE_ID_HASH: {d1daca31-6256-358c-65b5-69af54392880}
Followup: MachineOwner

Hi,
For BugCheck FC, it indicates that an attempt was made to execute non-executable memory. For more details,
please refer to following article.
Bug Check 0xFC: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
à
whenever we start the service as a User on the domain
. When we start the service as a system local it starts without problem
Did you mean that just use a standard domain user account to start the service, then encounter the issue? If
configure Log on as Local System account, will no BSOD issue occurred? Just a confirmation, thanks for your understanding.
Please check if you install all necessary Windows Updates on the server.
In addition, as you know, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. However, it is
not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope this helps.
Best regards,
Justin Gu

BSOD when starting windows 7

My original processor in my HP Pavillion laptop went and I replaced it with a Core i5 480M but when I start the computer all it does is BSOD! I uninstalled the graphics drivers and when I try to use the ATi Radeon graphics, all I get is "Windows has stopped this device because it has reported problems"
This question was solved.
View Solution.

Munk451 wrote:
Spoke too soon, all it does is BSOD!
Start in safe mode and uninstall the AMD drive and redownload the HP AMD driver on their site and install that and reboot and see if the BSOD goes away?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

BridgeView gives error when starting historical data engine

Has anyone come across this problem
The software has been operating well for the last 3 years
now all of a sudden has given this error when starting the Historical database engine

Adobe has an how-to for that;
http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/appv.html, though it doesn't refer to the ARm service. Firthermore it is written for App-V 4.x,
so the steps may be a little bit different.
http://stealthpuppy.com/adobe-reader-xi-deployment/ a first-stop-source.
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

HT3224 I am new to Mac and started transferring data from my PC to my new Macbook Pro. Connection was lost once I started and now my Pro is stuck on the 'Transferring Information' screen. How do I get out of this screen to attempt the connection again?

II am new to Mac and was trying to transfer data from my PC to my new Macbook Pro. The connection was lost however and now my Pro is stuck on the 'Transferring you nformation' screen. How do I get out of this screen so I can attempt the connection again? Is it safe to force shut down of my Mac and will it still prompt me through all the setup process again?

Welcome to Apple Support Communities
If your Mac and PC are connected by Ethernet, unplug and plug that cable again. If not, you have to turn off the MacBook by holding the Power button.
In the next startup, try to transfer your files again. It's important not to interrupt the transfer process, because in most cases, you will stop it and you won't be able to resume it

1.12 Drivers still BSOD when starting Sonar...

Many of you may not have noticed, but nVidia has developed an ASIO driver, which is used to achiece really low audio latency in programs like Cubase, Logic, etc.... Unfortunately their WDM drivers are still crap. They should finished what they started before moving on to a totally different driver model. Damn!!!

I've noticed a couple of people now saying the new drivers crash the computer.
I found that running Ultima 9 Ascension would crash the machine after a while with these new drivers.
But, I don't believe the new audio driver is the culprit.
I have a GF3 Ti200 in my system and after the nforce drivers were installed I was mysteriously back at Detonator V29.42 (i was using 30.82 - the latest reference).
So I reninstalled the latest reference drivers - the machine at that point did a minor dummy spit and I ended up with standard VGA - installed the reference 30.82's again, and have had no crashes since then.
Greg

Just bought a new macbook w/ mtn lion. transferred data from my old macbook over n it created another user name. that's actually good--xcept for music, which i want on my new acct. How do i move files from my "old comp" acct to my new one?

i just bought a new macbook w/ mtn lion. when i transferred data from my old macbook over, it created another user name (i called it "old computer"). That's actually good--I'm not going to be accessing old files frequently--except for music, which i want on my new user name. How do i move files from my "old comp" account to my new one? Is there a way to easily move large #'s of files, or just one by one? I've googled extensively but can only find instructions for OSX 10.6 and previous, which talks about the "Shared folder," which I can't seem to find.

jesster03 wrote:
i just bought a new macbook w/ mtn lion. when i transferred data from my old macbook over, it created another user name (i called it "old computer"). That's actually good
That's actually bad. Peruse Pondini's Setup New Mac guide and seriously consider starting over.

Error 8 when starting the extraction program (BI7.x)

I am receiving the following message when loading from the ODS to the data targets:
Error 8 when starting the extraction program
Message no. R3019
Diagnosis
Error 8 occurred when starting the data extraction program.
System response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or create a problem message of your own.
I have searched the forums and OSS, and can't find anything that matches my situation exactly. I was originally getting an error message that the infosource (80FIA_DS11) didn't exist in the source system. I restored the BIP client and all transfer structures were reactivated. Now when I try to load, I get this error 8. Has anyone experienced this issue?
Thanks,
Pam

Josko,
I am also using BI 7.x and had the problem loading from DSO to Infocube. What are the entries in table ROIDCPRMS? What is the host name displayed when you run transaction SM51 in the BI system?
Pam

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

Bi data upload error:status 51 - error: Error 8 when starting the extr prog

while data load form the source system into thw bw i am getting error in error monitor as under,
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
                                IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
                               Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
   r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
                 IDoc sent to SAP system or external program"
   bw side: "IDoc: 0000000000007089 Status: Application document posted,
                 IDoc was successfully transferred to the monitor updating"
what to do at r/3 side?
Best regards,
dushyant.

Josko,
I am also using BI 7.x and had the problem loading from DSO to Infocube. What are the entries in table ROIDCPRMS? What is the host name displayed when you run transaction SM51 in the BI system?
Pam

When transferring data from an old hard drive to a new one, is there a way to keep alias files and folders in tact?

My mac and I rely HEAVILY on the use of alias files and folders. The simple version of my question is: When transferring data from an old hard drive to a new one, is there a way to keep alias files and folders in tact? These are not symlinks or symbolic links, they're all alias files and folders.
Is there any software out there that might help me with a solution? Are there any tricks or tips you can give me to try?

Use either Setup Assistant at first start, or Migration Assistant on subsequent occasions and all will be transferred intact. Given your wording I presume you are Unix savvy and will appreciate the problems that duplicate userids would cause, so of you use MA for the migration, make sure the target Mac has no userid equal to that on the source and you will be fine.
SA does not have these issues since it runs before any user account is created, so it can simply copy over everything. But MA runs after the fact and only solves the issue partially by changing the UID in the user directory, leading to permission problems.

HT4889 When I transferred my data from a 128GB Macbook Air to 256GB Macbook Air (brand new version as of 9/1/13) I end up with 188GB used! I add up the size of Users, System, Library and Applications and it comes to 90GB. What am I missing?

When I transferred my data from a 128GB Macbook Air to 256GB Macbook Air (brand new version as of 9/1/13) I end up with 188GB used! I add up the size of Users, System, Library and Applications and it comes to 90GB. What am I missing? How did I "use" up so much space in migrating from one Mac to another?

Did you use the Setup Assistant available at the beginning of the new machine's setup process? Or did you use Migration Assistant later after you had set up the new machine?
If you used Migration Assistant, you generally wind up with two accounts (the new one you set up on the new machine plus the old one you ported over) - that may explain your excessive use of space. In that case, you can either manually combine/remove all unnecessary duplicate files, or you can start over by using Command + R, wiping your drive, and downloading the OS. Once it's downloaded, use the Setup Assistant offered at the beginning of the install/setup process.

HT3275 I just brought a New Macbook Pro and was successful in transfering data from my old macbook. However when I try to back up to my time capsule I receive this message. "The backup disk image "/Volumes/Salvatore Totino's Time Cap/Lorraine's MacBook Pr

I just brought a New Macbook Pro and was successful in transfering data from my old macbook. However when I try to back up to my time capsule I receive this message. "The backup disk image “/Volumes/Salvatore Totino's Time Cap/Lorraine’s MacBook Pro.spars

You may need to reset TM and start with a fresh full backup.
For the particular error see
http://pondini.org/TM/Troubleshooting.html

I am receiving an error message when starting up iTunes: iTunes was unable to load data class information from sync services. Reconnect or try again later. (what does this mean?)

I recently updated my iTunes to the most recent version and I am receiving an error message when starting up iTunes: iTunes was unable to load data class information from sync services. Reconnect or try again later. (Does anyone know what this means and if it is going to cause me issues?)

http://support.apple.com/kb/TS2690?viewlocale=en_US&locale=en_US

BSOD when start transfering data

Similar Messages

Maybe you are looking for