BSP pages in test system after transport have same URL as development

Hi. I have just transported some BSP's from our development into our test system and have encountered a problem.
The URL's of each page is the same as it was in the development system, so when we try and use the pages in the test system we get a "service can not be reached" error.
I am relatively new to BSPs and this is the first time I have transported them. I presumed the URL would update to reflect each server.
Have I missed a setting or something? I searched on SDN but could not find a similar post.
Thanks a lot for your help.
Regards,
Dave.

Hi,
check whether the service is active in transaction SICF
(it may become inactive, when there is patch applied, upgrade , etc)
then you will get one screen there then what you need to do is
without entering anything just click execute and expand the tree to
default_hots->sap->bc->bsp->sap-> under this node you should be able to see your BSP name . right click on it and click activate.
here The BSP Name is nothing but the BSP Application name. When you create a BSP applicaiton, a SICF service is created along with the BSP application. All the request that the user makes to this BSP application is processed by the service only with the help of this corresponding SICF service.
regards
Bhavana

Similar Messages

Test System (BQ1) Objects showing up wrong Source System after Transport.

Hi Experts,
We are working on IS-U BI7.0 Project. We have finished with our Development and have transported the DataSources, Transformations and DTPs from Development (BD1) into Test (BQ1) Systems.
We have entered values in the Conversion of Logical Source Systems correctly.
When we select the DataSource and Click Object Directory Entry from the Extras Menu, we found that the Original Source System is defined as BQ1 instead of BD1 (Development System), which is where the Object is getting Transported from.
We have implemented an SAP Note:1008633 (Incorrect Source System after Transport (RSTRAN 514) but couldn't resolve the issue.
We basically want all the Objects in the BQ1 (Test System) showing the Original Source System as BD1 (Development System) but only the DataSources and it's connected Transformations and DTPs are originating from the BQ1 (Test) System itself (The Transformations when Transported from BD1 to BQ1 are Transported with a different Technical Name which is very strange).
Had anyone faced similar problem and if so, what was the effective solution implemented.
Any help in this regard is very much appreciated.
Thanks in Advance.
Best Regards,
Chandu.

It is resolved by our Basis.
Thanks,
Chandu

Table structure changed in testing system after system refresh.

Hi Team,
Recently we underwent a system refresh in Testing System where the Testing data is filled with Production data. But now we find that in one table some fields which we had deleted they are again found there. The version history of table is also gone. The table object was under testing in testing system and after which it was supposed to be transported to production. I believe System refresh only means refresh of data and it has nothing to do with table structure. Please correct me if I am wrong. Please also let me know what could be the reason of those changes in table if it is not System Refresh.
Regards,
Amit

I believe System refresh only means refresh of data and it has nothing to do with table structure.
Alas, you were wrong, after all table definition are data too, as program sources...
You have to re-import every transport request which was not yet transported to production in your test system.
Regards,
Raymond

BSP link to Workflow task after transport - trans BDLSS

I was able to call a BSP from SAPGUI inbox (trans SBWP) by doing the necessary config in transactions WF_HANDCUST and WF_EXTSRV - generate my task from WF_EXTSRV, etc. The task was generated as a local object but I converted this to a transportable object.
This worked in our development system.
I need to get this into a test system and all the config/workflows was transported correctly. However the link between the bsp and task is not on table SWLWPTSSID as in dev 010.
Iu2019m trying to run transaction BDLSS or report RBDLSMAP to convert the table but that does not appear to be working. What table should I convert in trans BDLSS? Does anyone have any idea what Iu2019m doing wrong?

All,
Resolved this. Here is the solution -
It came down to bad/missing entries in table SWLWPTSSID. This is the table that links the web service maintained in WF_EXTSRV with the workflow task. As it is a client-dependent setting, when you transport the task and webservice you also need to adjust this table using transaction SM30.
Cheers, Liz

Wrong conversion of source system after transport

Hello,
We ve got a a transport problem in our 3-3 Landscape. Connections for extraction are only between same systems ( f.e. dev to dev)
BI Dev BI Test BI Prod
R3 Dev R3 Test R3 Prod
The conversion of source systems is on the BI test:
BI Dev becomes BI Test
R3 Dev becomes R3 Test
The conversion of source systems is on the BI Prod:
BI Test becomes BI Prod
R3 Test becomes R3 Prod.
With this it tells me the after transport (BI Test to BI Prod) of objects with source system assignement that the R3 Dev System is not known.
The transport before from the BI Dev to BI Test worked well without any problems.
We`ve got the BI Test and the BI DEV on the same host.
Has anybody got an idea what is wrong?
Thank you folks.

It must be R3D (dev system)
Something like following should be maintained in production
R3DCLNT100 R3PCLNT100 [Assuming R3PCLNT100 is your production system]
Don't forget to assign points,
-jayant

Web Interfaces can be displayed incorrectly in QA system after transported

Dears,
I transported Web Interfaces for BPS from D system to Q system. I activate the BSP application in transation SE80 and activate the service node in transaction SICF in Q system. However, the BSP can't be displayed correctly with NO_METADATA_AVAILABE error.Also, I test the HTTP service in Q system, it works well. The transport steps I followed:
1) change the package of BSP application (SE80 D system)
2) write transport entry to new request (SE80 D system)
3) switch the correspoding service node to new object directory entry (SICF D system)
4) transport the request to Q system
5) activate BSP application (SE80 Q system)
6) activate BSP service node (SICF Q system)
Am I missing configuring something? or completely wrong steps? Any suggestions are appreciated.
Best regards,
Gerald

I resolved it myself

One SLD means rename of SAP system after transport?

On development got the situation of having naming conventions for SAP boxes like R3DCLNT100 within the configuration directory. Do I have to rename manually my systems after a transport to Q into R3QCLNT100?

Hi Yuki
Does it matter what transport system you are using? File transport system or the CMS?
Normally, you define a business system as transport target, which is different from the business system the transport target is being defined for.
If we have the requirement to have the following transport targets:
BS_MJD (Dev) -> BS_MJQ (Tst) -> BS_MJP (Prd)
we should always define a target for that system?
Best regards,
Marco

Help !!! - Webservices not accessible in target systems after transport

Hi
We have a ECC 5.0 box ( WAS 640 ) and have created Webservice definitions and released it to SOAP runtime. We were able to make calls to the this Webservice from external SOAP clients and looks ok. We had this webservice definition ( and its associated objects like - virtual interface,server proxy implementation etc ) moved to our QA system. In the QA system - we had to release the WS for runtime using t.code WSCONFIG and the service shows up in SICF transaction under /default_host/sap/bc/srt/xip/sap/ as active . But we are unable to access the service in our QA system http://xxxxxx:8625/sap/bc/srt/xip/sap/SVCNAME?sap-client=080&wsdl=1.1 ?
We checked the icm monitor from SMICM and everything looks ok in QA and the very same as in development. Can anybody out there help me with this ? Any pointers/similar experiences /known problems with transport webservices- and how you resolved it would be extremely helpful and appreciated.
This is the first time we are trying out this mode and we are under time-pressure to get this working. Please help !!!

http://xxxxxx:8625/sap/bc/srt/xip/sap/SVCNAME?sap-client=080&wsdl=1.1 ?
ICF requires you to use Fully qualified domain name.
xxxx.domain.com:port
amy be this is an issue

Runtime Error in Test Client after Transport

Hello SDNers,
I did enhancements to standard SAP component ICCMP_BP_SEARCH in developement system in client XXX of system SSS.
I wanted to test the functionality in client YYY so used SCC1 transaction to transport from client XXX to client YYY.
But when i tried to test the application, it resulted in runtime error.
I had kinda identified the problem while debugging, in the class CL_CHTMLB_CONFIG_UTILITY method CREATE_UI_ELEMENT, it is not taking my Z class references rather it still referring to starndard classes.
My Z classes are created for IMPL class, CTXT class and CN00 class.
If any one has suggestions your help would be appreciated
Thanks in advance.
Best Regards,
Srikanth

Srikanth,
Is the definition of the enhancement set defined properly for your test client. This table does not transport and you have to maintain it manually in each client. The view is BSPWDV_EHSET_ASG for SM30. Client is not the first field in the table, so you have to edit this view in each client.
Take care,
Stephen

Quick question on conversion of source system after transport.

hello all,
I have transported all my objects from dev to QA in BW (and same in r/3). Now i want to let it all go to production environment. So do I have to go in rsa1 of BW prod system and make a entry in there ?
In my BWQAS i have an entry in there
Original source system Target source system
R3DCLNT100 R3QCLNT100.
So when i make the entry in BW prod environment what should be source system R3D or R3Q?
Thanks,
Raj

It must be R3D (dev system)
Something like following should be maintained in production
R3DCLNT100 R3PCLNT100 [Assuming R3PCLNT100 is your production system]
Don't forget to assign points,
-jayant

How can I edit or remove iWeb pages from Mobile me after I have published it to another site?

I have published iweb pages to another server and now I need to replace the mobile me version with page "pages moved to..." or at least I need to delete old version. However I can't find any way to do this from mobile me or from iWeb.
From Mobile me I cant find any way to even delete pages.
With iWeb I cant edit the old version because I cant find way to have two version of same pages. As I understand what I need is a version of my republished pages that only contains the index page "pages moved to...". But I cant create that because I cant have two versions.
Yours Mika

Go here : https://www.me.com/idisk/
Then follow the folders :

BADI not found in QA System after transporting from DEV system

Hi,
I had created a new implementation ZHR_IN_CALC_PTX_AMT to the BADI: HR_IN_CALC_PTX_AMT in the DEV system with Request ID. But when i had transported that request, i am not able to find that BADI implementation in SE18 and SE19 respectively in Quality system.
Please suggest me on this, as this is urgent.
Regards.
Ravi

Hi,
Can you pls repeat the BADI Definition name? I couldn't find HR_IN_CALC_PTX_AMT in SAP versions 4.7, 5.0 and 6.0. Which is the version you use for development?
Regards,
Renjith Michael.

Last changed date different between two systems after transport

Hi, first of all, I am not from basis background and just want to make sure whether is this something correct or not.
I found that the "Last changed date" and "username" are not same between the original system and the target system. Is this something configurable?
And the "username" field is totally empty. However, the program code's version is identical in both systems.

I think I misunderstood your question. You are referring to the system Transports not the connections between systems. If the Transports are not transferring all the contents, you really should talk to your basis folks and tell them which items are not being reproduced correctly.
Regards,
Mike

How do I have my podcast on itunes after I have a url and I have made it public on my site?

Hi I submitted my podcast url - it is now siting in itunes
i made my site live today and made a podcast public but it is not linking to itunes and coming up in itunes
can anyone please tell me what to do
thanks
deb

Have you constructed a valid feed and submitted that to the iTunes Store?
Have you yet received an email confirming acceptance into the Store and been given a URL for your Store page? (It can take several weeks to be accepted.)
If so does your podcast show at the URL you have been given?
If you have queries about your podcast please post the URLs of the feed and the Store page if you have one, otherwise it's not really possible to comment.
You may find my 'get you started' page on podcasting helpful if there is anything in the process you are unclear about:
http://rfwilmut.net/pc

AppleScript to check all pages within one Indesign (CS6) document have same size.

I have bunch of InDesign (CS6) documents containing different page sizes (some are designed for a particular device and some are designed for multiple devices using alternate layouts). I need to assure all page sizes are same before I run a particular script.
So I need a Applescript which can request a folder location of closed files and then open and run through the InDesigns in that folder (ignoring any other files) and then open a text file report saying all page sizes are same or not. (Sorry! for my English)
Any help is much appreciated!

sure,
still no error-handling included, so use on own risk ;-) ...
#target Indesign
var selFolder = Folder.selectDialog();
if(!selFolder) {exit();};
var allFiles = selFolder.getFiles('*.*');
var currDate = getDate();
var currLogFile = File(selFolder.toString() + '/' + currDate + 'pagesSizeLogFile.txt');
doStuff(allFiles);
currLogFile.execute();
function doStuff(filesFoldersArray){
var l = filesFoldersArray.length;
app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;
while(l--)
var currItem = filesFoldersArray[l];
if(currItem instanceof(Folder)){
 nextItems = currItem.getFiles('*.*');
 doStuff(nextItems);
 else if ( currItem.displayName.indexOf('indd') != -1){
 currDoc = app.open(currItem, false);
allPagesBounds = currDoc.pages.everyItem().bounds;
currDocPagesWidthHeight = [currDoc.fullName.toString() + ':\n'];
for(var b = 0; b < allPagesBounds.length; b++) {
 h = allPagesBounds[b][2];
 w = allPagesBounds[b][3] - allPagesBounds[b][1];
 resString = '' + currDoc.pages[b].name + ': ' + w + ' x ' + h + '\n';
 currDocPagesWidthHeight.push(resString)
 var samePageSizesOrNot = checkUnique(currDocPagesWidthHeight);
 switch(samePageSizesOrNot)
 case false :
toFile(currDocPagesWidthHeight.join(''));
currDoc.close(SaveOptions.NO);
break;
default : currDoc.close(SaveOptions.NO); break; }
app.scriptPreferences.userInteractionLevel = UserInteractionLevels.INTERACT_WITH_ALL;
function toFile(pwh)
 currLogFile.open('a');
 currLogFile.write(pwh);
 currLogFile.close()
function checkUnique(someArray) {
 var tmpArray = [] ;
 var tmpString = '';
 for (var i = 1; i < someArray.length; i++) {
 currItem = someArray[i];
 if (tmpString.indexOf(currItem.slice(2,-1)) === -1){
 tmpString = tmpString + ' ' + currItem;
 tmpArray.push(currItem);
 if (tmpArray.length === 1)
 return true;
 }else{
 return false;}
 function getDate(){
 var d = new Date();
var day = d.getDate();
if(day < 10){day = '0' + day;};
var month = d.getMonth() +1;
if(month < 10){month = '0' + month;};
var year = '' + d.getFullYear();
var hours = d.getHours();
var minutes = d.getMinutes();
var seconds = d.getSeconds();
var dateString = month + day + year.substring(2) + '_' + hours + minutes + seconds + '_';
return dateString;

BSP pages in test system after transport have same URL as development

Similar Messages

Maybe you are looking for