Runtime Error in Test Client after Transport

Hello SDNers,
I did enhancements to standard SAP component ICCMP_BP_SEARCH in developement system in client XXX of system SSS.
I wanted to test the functionality in client YYY so used SCC1 transaction to transport from client XXX to client YYY.
But when i tried to test the application, it resulted in runtime error.
I had kinda identified the problem while debugging, in the class CL_CHTMLB_CONFIG_UTILITY method CREATE_UI_ELEMENT, it is not taking my Z class references rather it still referring to starndard classes.
My Z classes are created for IMPL class, CTXT class and CN00 class.
If any one has suggestions your help would be appreciated
Thanks in advance.
Best Regards,
Srikanth

Srikanth,
Is the definition of the enhancement set defined properly for your test client. This table does not transport and you have to maintain it manually in each client. The view is BSPWDV_EHSET_ASG for SM30. Client is not the first field in the table, so you have to edit this view in each client.
Take care,
Stephen

Similar Messages

Runtime Error 9 on WAD after transports

Hi Experts,
I am << Run time error : 9 Subscript out of Range >> and it throws me out of WAD.
This is happening only in QA after the transports, but Dev is working fine.
I have checked the notes and steps suggested in the previous discussions but none of it is helped.
Please if any one has dealt with this error before and resolved it please help.
Thanks
Sarah

This is the only web template in QA and this was the first transport for the template.
I am unable to even get what the error actually is to debug it further other than the message.
I still continue to get the error even after re-import infact even Dev web tempplate also gives the same error after transport.
If anyone has had this error before please suggest.
Thanks
Sarah
Message was edited by: Sarah

Runtime Errors SYNTAX_ERROR in SAPLS_CODE_INSPECTOR after the ECC6.0 upgrad

we recently upgraded our development test sandbox from 46C to ECC6.0 using downtime minimized strategy for practice purposes.After a sucessful completion of the upgrade we applied all the support packages successfully upto the latest available. Upon testing we found that everything else works fine except code inspector. Everytime we go to transaction sci we get syntax error
Runtime Errors         SYNTAX_ERROR
Date and Time          08/20/2008 08:26:29
Short text
     Syntax error in program "SAPLS_CODE_INSPECTOR ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "????????????????????????????????????????" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program "SAPLS_CODE_INSPECTOR " in
      include "LS_CODE_INSPECTORTOP " in
     line 11:
     ""SCI_DYNP" must be a flat structure. You cannot use internal tables, s"
     "trings, references, or structures as components. ."
     The include has been created and last changed by:
     Created by: "SAP "
     Last changed by: "CRENSHAWDP "
     Error in the ABAP Application Program
     The current ABAP program "????????????????????????????????????????" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Please eliminate the error by performing a syntax check
     (or an extended program check) on the program "SAPLS_CODE_INSPECTOR ".
     You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
r analysis
The following syntax error was found in the program SAPLS_CODE_INSPECTO
""SCI_DYNP" must be a flat structure. You cannot use internal tables, s
"trings, references, or structures as components. ."
to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System->List->Save->Local File
2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
    In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
tem environment
SAP-Release 700
Application server... "kiel"
Network address...... "138.254.140.161"
Operating system..... "AIX"
Release.............. "5.3"
Hardware type........ "000B7B2ED600"
Character length.... 8 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "kiel"
Database type..... "ORACLE"
Database name..... "UPD"
Database user ID.. "SAPR3"
Terminal................. "D800204486"
Char.set.... "en_US.ISO8859-1"
SAP kernel....... 700
created (date)... "Jun 22 2008 20:58:25"
create on........ "AIX 2 5 005DD9CD4C00"
Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 166
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "AIX 1 5, AIX 2 5, AIX 3 5, AIX 1 6"
Memory consumption
Roll.... 16128
EM...... 8379840
Heap.... 0
Page.... 40960
MM Used. 705904
MM Free. 3481488
r and Transaction
Client.............. 070
User................ "CRENSHAWDP"
Language key........ "E"
Transaction......... "SCI "
Transactions ID..... "48AB59A7D7E00112E10080008AFE8CA1"
Program............. "????????????????????????????????????????"
Screen.............. " "
Screen line......... 0
Information on where terminated
Contents of system fields
Name     Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 0
SY-DBCNT 0
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20080820
SY-UZEIT 082629
SY-XPROG
SY-XFORM
Internal notes
    The termination was triggered in function "ab_genprog"
    of the SAP kernel, in line 1551 of the module
     "//bas/700_REL/src/krn/runt/abgen.c#10".
    The internal operation just processed is " ".
    Internal mode was started at 20080820082629.
    Program name.........: "SAPLS_CODE_INSPECTOR ".
    Error message........: ""SCI_DYNP" must be a flat structure. You cannot use
     internal tables, s".
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit      = 2684354560
=> Stack limit     = unlimited
=> Core limit      = unlimited
=> File size limit = unlimited
=> Heap address = 0x11716f260
=> Stack address = 0xfffffffffff2a20
=> Stack low     = 0xfffffffffff2a20
=> Stack high    = 0xffffffffffff710
=> Stack Trace:
#AixStack() at 0x1000a2474
#CTrcStack2() at 0x1000a256c
#rabax_CStackSave__Fv() at 0x1000d0e04
#ab_rabax() at 0x1000cd7e4
#ab_genprog() at 0x100b3d5f8
#newload__FPCcP13TmpSubpoolDirUiPUi() at 0x1002194ac
#ab_LoadProgOrTrfo__FPCcUiPUi() at 0x10021905c
#ab_load() at 0x100218e2c
#ab_LoadMainProg() at 0x100820d6c
#dystartx() at 0x100ade944
#dy_cdiag() at 0x100833174
#ab_ctransaction__Fv() at 0x100ae1ef0
#ab_retdynp__Fi() at 0x100821c98
#ab_dstep() at 0x100821924
#dynpmcal() at 0x100e932e0
#dynppai0() at 0x100e905ec
#dynprctl() at 0x100e99d48
#dynpen00() at 0x100e8cc18
#Thdynpen00() at 0x1000f9ed4
#TskhLoop() at 0x1000fec7c
#ThStart() at 0x100115890
#DpMain() at 0x1017f4b14
#nlsui_main() at 0x1018e2b6c
We contacted SAP OSS about this problem and they suggested that we check our LS_CODE_INSPECTORTOP include in program SAPLS_CODE_INSPECTOR and revert it to the original version. We did that and still are getting this error. Any suggestions how to fix this issue. All advices are welcome.
Thanks.
Kamran

Nope... this is SAP standard code so I will reply to the OSS and wait for them to come back to you.
Regards
Juan

Runtime error(Time limit exceeds)after executing select query

Dear experts, whenever i executing the select query in this zprogram i am getting runtime error that time limit exceeds.i am using inner join and into table.after that also i am geetting error. how can i resolve it??
SELECT LIKP~VBELN LIKP~WADAT_IST LIKP~VEHICLE_NO LIKP~TRNAME
          LIKP~VEHI_TYPE LIKP~LR_NO LIKP~ANZPK LIKP~W_BILL_NO
          LIKP~SEALNO1                                       " Seal NO1
          LIKP~SEALNO2                                       " Seal NO2
          LIPS~LFIMG
          VBRP~VBELN VBRP~VGBEL VBRP~MATNR VBRP~AUBEL VBRP~FKIMG
          VBAK~AUART
          VBRK~FKART VBRK~KNUMV VBRK~FKSTO
          FROM LIKP INNER JOIN LIPS ON LIKP~VBELN EQ LIPS~VBELN
                    INNER JOIN VBRP ON LIKP~VBELN EQ VBRP~VGBEL
                    INNER JOIN VBAK ON VBRP~AUBEL EQ VBAK~VBELN
                    INNER JOIN VBRK ON VBRP~VBELN EQ VBRK~VBELN
          INTO TABLE I_FINAL_TEMP
          WHERE LIKP~VSTEL = '5100' AND
             LIKP~WADAT_IST IN S_WADAT AND
                VBRP~AUBEL IN S_AUBEL AND
                VBAK~AUART IN ('ZJOB','ZOR') AND
                VBRK~FKART IN S_FKART AND
*               VBRK~FKART IN ('ZF8','ZF2','ZS1') AND
                VBRK~FKSTO NE 'X'.
When I am debugging the select query.the cursor will not go to next step.after 15-20 minutes i am getting runtime error(time limit exceeds).
how can i resolve it for that scenario??

Looks like whole SD flow you trying to fetch in single query
First you check the database statistic of these table are upto date in system ( Check with basis team )
if this query was working fine earlier.
Most of table involved are huge volume tables which queried with any primary key
Any secondary index on created for LIKP on VSTEL WADET ?
My suggestion would be split the selection queries and make use of primary or existing secondary index to fetch the desired result if possible. For testing purpose split the queries and find which is taking more time and which needs index by taking squel trace in ST05.
Also take ST05 trace of this query in debugger ( New debugger -> special tool -> trace > ST05/SE30)

SWN_SELSEN not working in test client after client-copy

Hi all,
We are using extended notification without problem until test client was refreshed by client-copy from production client. In test client, report SWN_SELSEN did not generated notification even there are newly generated workflow items. Because of client-copy, I found that tables SWN_NOTIF, SWN_NOTIFTSTMP, SWN_SENDLOG, SWN_TIMESTAMPS are all empty in test client.
Please advise how to make report SWN_SELSEN back to work in test client. Thanks.
<< Additional information >>
(1) Run report SWN_SELSEN_TEST with test Case 5 - Simulate Send Only. After this, some entries were written to above tables. But test on new workflow item, the schedule report SWN_SELSEN still fail to trigger notification.
(2) Run report SWN_SELSEN_TEST with test Case 4 - Send One Message Only. It triggered notifications for all active workflow items and sent out several hundred emails including workflow item created in step 1. However, further test on new workflowitem, the schedule report SWN_SELSEN is still unable to trigger notification.
I think there may be something else missing, like the timestamp of delta. Please help.
Regards,
Donald

Hello,
I've experienced a few cases where stopping SWN_SELSEN and then restarting it helped to fill up SWN_TIMESTAMPS with proper values. How does that table look after you run it?
What is SWN_SELSEN_TEST?
Chck in SLG1 to get an idea of why it's not working. You can also run SWN_SELSEN in the foreground and debug it to see exactly where and why it goes wrong. Also check ST22.
regards
Rick Bakker
hanabi technology

Runtime error when testing function module 'RSWR_RFC_SERVICE_TEST'

Hi,
I'am integrating BIW 3.5 with EP 6.0 according to the report 'RSPOR_SETUP'.I've carried all the steps,but an error on step 12 : system failure during call of function module 'RSWR_RFC_SERVICE_TEST' is there .When I test the connection with function module 'RSWR_RFC_SERVICE_TEST', a runtime error is coming i.e. "<--Localization failed: ResourceBundle='com.sap.engine.services.rfcengine.RFCR'.
Any help would be highly appreciated.
Regards.
Manoj

Hi Manoj,
From this I can understand that a critical resource is missing which is required to start the RFC service in Reporting Services Web Runtime. This might be because of incomplete patch deployment. Deploy all the required software component archives related to com.sap.engine.services component and then retry this... I think this should solve the issue.
Imran...

Runtime error saying missing iview after deployment

Hi all gurus!
A very irritating problem is annoying the hell out of me. The background: as an experiment I downloaded and took a copy for safety reasons of the com.portal.navigation.toolarea file. I then edited the jsp file in one of the copies and deployed the result into the portal and emediately got a runtime error. Not very clever to edit the SAP standard file but as I mentioned I took a copy for precaution and deployed that one back into the portal. But now for the problem: I still get the same runtime error!
The error message is as follows:
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.toolAreaiView
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file
It seems like some connections have been broken. What do I have to do in order to restore everything? I have checked at the repository at the portal server itself and the folder with the original content is to be found there, that is the jsp-file is the unedited one.
Any ideas? I think it's just some standard procedure I have to do but I don't know what to be honest.
Best regards
Benny Lange

Hi,
As you have the original backed up par file do the following:
1. Goto Administration Console and undeploy the project
System Administration-> Support-> Portal Runtime-> Administration Console
2. Do the offline undeploy as suggested below.
3. Copy the backed up par file into folder ..\usr\sap\<SID>\<JC-->\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
4. Restart your server
5. After restart, check in folder ..\usr\sap\<SID>\<JC-->\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
You should see that your par file is renamed to par.bak
Offline undeployment:
Here is the way you can undeploy your par file manually:
Remove your par.bak files from:
..\usr\sap\<SID>\<JC-->\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
and
..\usr\sap\<SID>\<JC-->\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\temp
Mostly the par.bak will be present either in pcd or temp folders but not in both.
ex: C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
Greetings,
Praveen Gudapati

Runtime error while testing BAPI using Webservice Navigator

Hi all,
I created a webservice to a BAPI and tested in Webservice Navigator, while testing it is throwing the below error:
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Exception CX_SY_OPEN_SQL_DB
Termination occurred in the ABAP program "SAPLCRM_LINK_DU" - in
"CRM_LINK_SAVE_DU".
The main program was "RSM13000 ".
In the source code you have the termination point in line 15
of the (Include) program "LCRM_LINK_DUU01".
The program "SAPLCRM_LINK_DU" was started in the update system.
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "CRM_LINK_SAVE_DU" "(FUNCTION)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLCRM_LINK_DU "; its source code begins in line
1 of the (Include program "LCRM_LINK_DUU01 ".
Thanks,
Sanjani

I have created customized teh bapi BAPI_ACTIVITYCRM_CREATEMULTI and created a webservice for it.
I called BAPI_TRANSACTION_COMMIT in the Customized BAPI.
I tested it in webservice navigator and could see the that OBJECT_ID was generated, but it is not getting updated in database table eventhough i called the Commit fm in my customized BAPI, it is showing an error with a popup as EXPRESS DOCUMENT "UPDATE WAS TERMINATED" received from author "xyz".
Suggest me with some solution.
Regards,
Sanjani
Edited by: Sanjani on Dec 2, 2010 2:26 PM
Edited by: Sanjani on Dec 2, 2010 2:29 PM

Runtime Error when launching itunes after install

I downloaded and install itunes. When I attempt to open itunes I receive the following Runtime error message:
The application has requested the Runtime to terminate in an unusual way.
Help....

I am experiencing the same thing I have uninstalled itunes and redownloaded it but whenever I open itunes I still see the same runtime error message and have to close itunes. I hope someone can help us.

Runtime error from LT03/LT06 after System upgrade

Hi All,
Currently we are upgrading our system from 4.7 to eec6.
Not we are getting a runtime error while executing LT03/LT06 txns...
the error is - Runtime error GETWA_NOT_ASSIGNED...
Program - SAPLLPRI
Include - LLPRIF00.
Row 525.
Module name - PROTO_TAB_READ.
Please suggest me...if there is any SAP note .to be appied.
Thnx
RK

Please search yourself for applicable SAP notes before asking others.
Thread locked.
Thomas

BSP pages in test system after transport have same URL as development

Hi. I have just transported some BSP's from our development into our test system and have encountered a problem.
The URL's of each page is the same as it was in the development system, so when we try and use the pages in the test system we get a "service can not be reached" error.
I am relatively new to BSPs and this is the first time I have transported them. I presumed the URL would update to reflect each server.
Have I missed a setting or something? I searched on SDN but could not find a similar post.
Thanks a lot for your help.
Regards,
Dave.

Hi,
check whether the service is active in transaction SICF
(it may become inactive, when there is patch applied, upgrade , etc)
then you will get one screen there then what you need to do is
without entering anything just click execute and expand the tree to
default_hots->sap->bc->bsp->sap-> under this node you should be able to see your BSP name . right click on it and click activate.
here The BSP Name is nothing but the BSP Application name. When you create a BSP applicaiton, a SICF service is created along with the BSP application. All the request that the user makes to this BSP application is processed by the service only with the help of this corresponding SICF service.
regards
Bhavana

Error in quality enviroment after transport

I have imported a mapping from Development to Quality.I have tested the scenario in Development it was working fine.But in quality when i imported and tested its not working when i execute the interface
I am getting the following error in Trace.
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
Valuable inputs will appreciated...
Thanks
Santosh

Hi santosh
have a look on theses ...
There is gud explanation by Sergio & Bhavesh at the following thread, plz go thru:
Fundamental questions on transporting XI objects
Transporting objects in XI is different from transporting ABAP objects. As prateek mentioned you can transport XI objects using File system or CMS. By default you can use File system. If you want to use CMS you can transport it.
Transporting objects in XI
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3./people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
Transporting Objects IR ID using CMS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
http://help.sap.com/saphelp_nw2004s/helpdata/en/e1/69a740aa053a13e10000000a155106/frameset.htm
You can choose either File transfer methor or CMS. File transfer method is the simplest.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
Pls reward if useful

Error while testing client proxy

Hi Gurus,
We have a scenario: we are consuming an external Webservice into SAP (Creating a client proxy), we have created the proxy class and the binding in using SOAMANAGER.
When we are testing this proxy it is giving us below error:
Regards,
Krishna Chauhan

Hi Krishna,
Try installing the SSL cert to TrustedCAs keystore reconfigure your communication channel that will locate the exact location of the certificate.
Refer the below thread
ICM_HTTP_SSL_ERROR
Regards
Bhargava Krishna

Error adding Default roles after transport

we are trying to transport our GP to another system.
the transport imported successfully.
but we are getting below error if we need to add the Default roles in the new portal system.
Administartion -> Assign default roles ->
Error/Message: The process template does not contain roles to which you can assign default values.
     Could not retrieve process template
Design time:
     Error/Message: 1.Cannot retrieve activity template: Development object does not exist in the database
                    2.      Cannot retrieve object:
Please suggest me if you have faced simiilar issue.

Already I have tried in both from Administartion -> Assign Default Roles -> Select the process, by selecting the process & when we click on Open, this error is populated.
Also in Design time -> select the process -> by clicking on the "Open" , I am getting this error.
Also, I have tried the option to do "Edit All" to change the version of all the objects and transport them to targeted system.
and , also implemented the SAP Note: 1321013.
But in all the above cases, I am getting the same error.
Then tried to remove the Default Roles and assigned all the roles to Initiator, then transported, still when I try to run the process and when I open the process getting the same error.
SAP Note: 1321013:
Terminate all process instances.
Unlock all objects.
Delete all process templates.
Empty trash.
Redeploy process templates.
Release objects after Import.
(http://wiki.sdn.sap.com/wiki/display/JSTSG/(GP)ICannotStartorOpenaProcess)

Error in Gateway service after transport

Hello All,
Currently I am facing issues in the quality gateway server with the Services. The services are running fine in the development server , but when it is transported in the quality server and trying to run the service it is giving an error
Model 'ZXXX_WORK_CENTER_MDL_0001_BE ' contains error.Contact Administrator.
If anyone has faced this issue and know the resolution please let me know.
Regards,
Arijit

Hello All,
The issue is resolved now. the problem was due to RFC connectivity problem with the backend ECC server.
Thanks,
Arijit

Runtime Error in Test Client after Transport

Similar Messages

Maybe you are looking for